Can-Am Defender Fuel Problems - SOLVED

แชร์
ฝัง
  • เผยแพร่เมื่อ 8 พ.ย. 2024

ความคิดเห็น • 48

  • @booterone1
    @booterone1 3 ปีที่แล้ว +4

    I had a brand new canam defender hd10 where the fuel pump failed with 44 miles on the odometer. In with talking with a few different shops, it appears pumps were defective from the start. Still trying to get can am to fix it. Unfortunately it is outside of their narrow warranty window. But, what company designs and builds $18k machines and the fuel pump fails.

  • @scottsmith5623
    @scottsmith5623 4 ปีที่แล้ว +1

    Heh guys... I’m a garage guy myself, I have a 2018 Can Am Outlander 450 I’m working on and it’s driving me nuts... starts up and idles for a few seconds and backfires and dies. Starts right back up but only runs for about 5 seconds. New plug, (old one looked ok), checked connections, air filter all good. Took the fuel line off at the throttle body, cycle the key and get tons of fuel. I know fuel volume and fuel pressure are different tho, not sure I have the equipment to check the psi. Google took me to your video, you guys have a great site btw... very professional! Thx very much in advance if you have any suggestions. Scotty

    • @DerangedOffRoad
      @DerangedOffRoad  4 ปีที่แล้ว

      I'd definitely get a reading on your fuel pressure. Once you know that you can go from there. Also check any fuel filters

    • @mikecarrillo9362
      @mikecarrillo9362 4 ปีที่แล้ว

      Scott Smith Im having the same problem with mine 2017 can am outlander 450 what did you find it was?

    • @chips5057
      @chips5057 หลายเดือนก่อน

      Fuel pressure should be 51psi my guess you got a fuel pump that's Weak by the sound of it

  • @rlshiflet
    @rlshiflet 2 ปีที่แล้ว +2

    Mine is a 2022, bought it new about a month ago. It started acting the same way as we went up the mountain and passed about the 6,000 elevation mark. It serious cannot handle full throttle then.
    We also had the gas tank pressure start squealing to let fuel out at the higher elevations.
    Once home it seems to run fine but we've had issues with it not wanting to start. HELP....

  • @robw3761
    @robw3761 5 ปีที่แล้ว +1

    Glad you got it fixed I don't understand why the dealer couldn't figure that out when you took it to them and wouldn't something like that be under warranty I have a Teryx like Garrett I think they come with a fuel filter almost positive like the one you want to install in your Rig

    • @DerangedOffRoad
      @DerangedOffRoad  5 ปีที่แล้ว

      I believe I had two separate issues. The previous limp mode was self induced by me. I later discovered I had left a battery connection lose under the dash. The lose connection caused it to go into limp mode. I tightened it up, but didn't say anything to the dealer because I wanted them to go through their diagnostic steps.
      The gas issue they didn't catch because it took 30 minutes of driving to get it to act up.

    • @robw3761
      @robw3761 5 ปีที่แล้ว

      @@DerangedOffRoad right on man while I hope you don't have any more problems again thanks for the videos

  • @freddyw4555
    @freddyw4555 3 ปีที่แล้ว +1

    How does the dirt get in the fuel tank. Do all OHVs get dirt. It should be a sealed system

  • @otahu26
    @otahu26 3 ปีที่แล้ว

    Should have that in your title.. 2400 miles is better then listing to the ATV TV, Magazine people go on about 300 miles and how great they are! Awesome vid tracking the problem too btw.

  • @aceyorba
    @aceyorba ปีที่แล้ว +1

    Went to the dealer to get a new fuel filter.They told me they only sell the entire fuel pump with filter.
    What a rip off. There are after market filters available.

  • @trevorkeyper48
    @trevorkeyper48 หลายเดือนก่อน

    My 2022 defender died…not sure if it’s a battery issue…started flashing bright…it said fuel sensor fault…any idea what’s going on ?

  • @joelleramsey7717
    @joelleramsey7717 4 หลายเดือนก่อน

    Originally I thought I had a fuel filter problem. After talking to a couple of michanics they suggested it was my evap tube. I topped off the tank the same day problems started. Any idea how to purge or drain evap ? Nothing came out.

  • @Allextinct
    @Allextinct 4 ปีที่แล้ว

    I just purchased a 2020 can am defender hd10 and it has 35hrs on it and it just started stalling out under load.
    I can run it around our yard and no issues but once I take it on the road and come to a stop it will stall out and have a hard time restarting.
    The dealer has it now and said they can’t find a problem since they can’t replicate it so I guess I will be pulling my fuel pump when I get it back home.
    We live in a dusty area so I’m hoping that is this is the same problem.

    • @DerangedOffRoad
      @DerangedOffRoad  4 ปีที่แล้ว

      Yeah definitely pull the pump and see what that filter looks like.

    • @petewerkowitch
      @petewerkowitch 4 ปีที่แล้ว

      @allextinct Did they get you fixed up?

    • @Allextinct
      @Allextinct 4 ปีที่แล้ว +1

      Peter W they couldn’t replicate the issue so nothing was repaired however they told me to put stable in with the gas because apparently the ethanol that is in the gas has been known to cause issues with all types of gas powered engines.
      So after I got it home I filled it up with so high octane fuel and a bottle of stable and haven’t had any issues since.
      Not sure if this will work for everyone but it is worth a shot if your still having problems.
      I’m gonna keep putting a bottle in every time I fill up now.

  • @conmanumber1
    @conmanumber1 5 หลายเดือนก่อน

    Defenders are very short lived here in New Zealand. Gearboxes self destruct, engine very prone to dusting, steering racks failure, front diffs blowing all within 2 years.
    Beyond that chassis crack, engine dusting. The speedo cluster dies after hrs exceeded.
    Get rid of that filter and plumb in a Racor Snapp water trap sediment filter... thank me later.

  • @todddanley5405
    @todddanley5405 4 ปีที่แล้ว +2

    my 2020 defender is surging then dies and is hard to start and is only running at 800 rpm

  • @davekamalas2537
    @davekamalas2537 3 ปีที่แล้ว +2

    I Have a 12 that is doing the same thing but I have 14000 miles on mine bought a fuel pump for it .

  • @brandonabbott7893
    @brandonabbott7893 3 ปีที่แล้ว +1

    Got a p1171 code replaced filter in tank can't seem to find any other issues but won't go passed 20 mph and not sure what else to look for now. Ideas? 18 defender hd10

    • @NelsonCobb
      @NelsonCobb 2 ปีที่แล้ว +1

      I have the same issues! Did you ever figure it out?

    • @aceyorba
      @aceyorba ปีที่แล้ว

      Same issue here only 200 miles on the unit.

    • @chips5057
      @chips5057 หลายเดือนก่อน

      Seat belts

  • @mfitting91
    @mfitting91 5 ปีที่แล้ว +2

    What did you end up doing for a filter on the breather line? My 2016 HD10 XT is sometimes hard to start after sitting, turns on and off a few times before it wants to run and will bog down on initial take off after sitting then acts fine. Thinking I may need to change this filter as well...

    • @DerangedOffRoad
      @DerangedOffRoad  5 ปีที่แล้ว +2

      Michael Fitting This is the filter I used. Spectre Performance 3991 Black... www.amazon.com/dp/B005BHXTY6?ref=ppx_pop_mob_ap_share
      Also Can Am recommends running 87 octane. Not anything higher. Many people have experienced hard starts on premium.
      I'd also change the plugs to these is you haven't. NGK (6546) DCPR8EIX Iridium IX... www.amazon.com/dp/B000CJ8CZY?ref=ppx_pop_mob_ap_share
      This has fixed people's hard start issues as well.

  • @jherrera3323
    @jherrera3323 7 หลายเดือนก่อน

    How long did u keep it running befor u took it for a test drive

    • @DerangedOffRoad
      @DerangedOffRoad  6 หลายเดือนก่อน

      At this point I have no idea. It was years ago.

  • @georgecollins368
    @georgecollins368 4 ปีที่แล้ว

    i have a 2019 can am maverick sport 1000, keeps saying fuel sensor fail. changed the fuel, pulled all the plugs, put in a new battery. we had it underwater. where is the fuel sensor?

    • @questionmark4348
      @questionmark4348 4 ปีที่แล้ว

      Fuel sensor is just the float system that shows you the fuel remaining in the tank, it's inside the tank and is part of the fuel pump assembly. Check the connections first

  • @lizzluvsu3
    @lizzluvsu3 4 ปีที่แล้ว

    My renegade runs for 30 minutes and then cuts off. You think if I clean out the tank and change the filter that would do it?

    • @DerangedOffRoad
      @DerangedOffRoad  4 ปีที่แล้ว

      It wouldn't hurt to do that especially if you've never done it before. Definitely need to check your fuel pressure also. Could be a weak fuel pump too. In the end my issue ended up being the throttle position sensor. Had to replace the whole throttle body to fix it.

  • @NelsonCobb
    @NelsonCobb 2 ปีที่แล้ว

    Mines having the same problem! I changed the filter and it was great for the first mile then starting doing the same thing again. Any ideas?

    • @DerangedOffRoad
      @DerangedOffRoad  2 ปีที่แล้ว +1

      My issue ended up being the throttle body. The dealer replaced that and I never had an issue again

    • @NelsonCobb
      @NelsonCobb 2 ปีที่แล้ว

      @@DerangedOffRoad good deal! I’m going to try cleaning mine before I replace it

    • @DerangedOffRoad
      @DerangedOffRoad  2 ปีที่แล้ว +1

      If you do replace it you'll need to have the dealer calibrate it for you

    • @NelsonCobb
      @NelsonCobb 2 ปีที่แล้ว

      @@DerangedOffRoad alright good to know. I guess I’ll just take it in 😂

    • @johndsunday
      @johndsunday ปีที่แล้ว +1

      So did your machine throw misfire codes on the cylinders and put you in limp mode when this happened? Mine starts fine. And if I’m easy on the throttle up to 30 mph she is fine. If I give her the onion she goes into limp mode engine light comes on and gives two code. Misfire on cyl 1 and on Cyl 2. Any ideas?

  • @endurancekennels
    @endurancekennels 4 ปีที่แล้ว

    I changed the filter on mine too and emptied the tank of debris. I can't get it started. How did yours start?

    • @DerangedOffRoad
      @DerangedOffRoad  4 ปีที่แล้ว

      It took a bit of cranking but it started.

    • @jorgetrevino5173
      @jorgetrevino5173 2 ปีที่แล้ว

      After you replace fuel filter,won't crank the engine,.first turn the ignition key on and listen how the pump is pushing the gas and same time purge air out.do it 2 times and start engine back to normal Regards my Friend

  • @mb6473
    @mb6473 4 ปีที่แล้ว

    What is the part number for the filter?

    • @DerangedOffRoad
      @DerangedOffRoad  4 ปีที่แล้ว

      HFP-S8-3 Can-Am Defender/Outlander 450 500 570 650 850 1000 L/Renegade 570 650 850 / Traxter 2016-2018 ATV/Quad Fuel Pump Strainer Set www.amazon.com/dp/B07BK2H4V3/ref=cm_sw_r_cp_api_i_WufhFb8EN77A9

    • @stuartgardner3035
      @stuartgardner3035 2 ปีที่แล้ว

      I ordered the fuel filters off Amazon, they do not even come close to the BRP fuel filters. Cut open a BRP fuel filter and you will see how good they are,they protect your system.
      Taking me 3-4 weeks to get and 3 times the cost, but I think it is worth the protection they give.

  • @warrenheslip692
    @warrenheslip692 ปีที่แล้ว

    Snorkel for air intake?