Welcome back , I ‘m learning that when a cart’s not running to start at the beginning. Simple basic stuff. Batteries, bad connections and so on. This is perfect example. Still working on carts as a hobby so people are calling me for help in my golfing community. Can’t tell you how many times I search your videos for help and found the solution. Anyway I was wondering when you were posting again. I know you came into a bunch of carts and thought you’d be busy fixing and flipping.
Lots of ways you could go with this. Flip right away. Put a little more work and flip for more money. Really do it up and try to max out the price. How long did it take you to build up the instinct to know which way to go?
Hey great video, like always lol...i was wondering if you had any idea where to find new pedals or pedal covers. I have a yamaha g16....keep up the awesome posta
Is it possible to elimate the mechanical portion of the F-N-R , and just tap into the F-N-R wires on the right side of the cart, and install a EZ-Go switch up on the dash? It seems more complicated to have to maintain that manual push bar and brushes.
How do you remove a golf cart motor at end of the motor were it attached to the axle it slides into a sleeve that is attached to the axel I have sped Deep Creep but just want turn loose up I don’t want to beat on it Help!!!!!!!
I’m getting one just like this one. Needs batteries is all. Is it possible to gain any speed with these 36V series carts with out doing full conversions?
Hello everyone, looking for a little insight here. We have a 1997 EZGO TXT ran fine but weak batteries upon purchase, we upgraded to 4 12v lithium batteries, 48v 200amp HD solenoid, 48v Alltrax NPX 4634EZ Controller. Swapped batteries, charge port, etc., labeled all wiring and wired the new controller, solenoid up exactly the same and after the swap the cart ran great for about 5 minutes, came to a stop and took off again and heard a noise kind of like a clunk or pop and the cart died, no power, smell of burnt electrical. Got back to the shop and sure enough the controller was burnt up, the solenoid seemed to be functioning properly, but the resistor was extremely hot, could not touch it. This resistor on the solenoid stayed extremely hot as long as we had the batteries wired in series, I would have to break the series by removing a connection to the batteries before that resistor would cool off. I am thinking the solenoid was bad and failed during the short test run but I am looking to you all more experienced folks for advice on what to check, am I on the right track with the solenoid or way off base? I am ordering a new controller, but I want to make sure I have the issue addressed before replacing it. Also does anyone recommend someone that can rebuild controllers that have been fried?
I'd love to buy you an adult beverage someday and find out where to look for the deals you find. The F'N R switch does exactly that more than people know.
I call clickbait, it’s not a 50 or 100 cart in that condition around here… that exact cart would be $1500 here. If that’s the case I just opened a trucking company. Where you at?
Welcome back , I ‘m learning that when a cart’s not running to start at the beginning. Simple basic stuff. Batteries, bad connections and so on. This is perfect example. Still working on carts as a hobby so people are calling me for help in my golfing community. Can’t tell you how many times I search your videos for help and found the solution. Anyway I was wondering when you were posting again. I know you came into a bunch of carts and thought you’d be busy fixing and flipping.
Just a suggestion…could also benefit from a good sweeping/vacuuming out, lots of pine needles left in it.
Thanks for sharing your knowledge. New to the GC stuff. If you knew it was running what would have been a good price? Thx
Might have to give that brand a try.
LPS makes a great cleaner called Electro 140
i use it all the time as an aircraft mechanic
Lots of ways you could go with this. Flip right away. Put a little more work and flip for more money. Really do it up and try to max out the price. How long did it take you to build up the instinct to know which way to go?
Hey great video, like always lol...i was wondering if you had any idea where to find new pedals or pedal covers. I have a yamaha g16....keep up the awesome posta
Good video Ryan! Wondering when your going to review your alltrax ac kit? I’m wanting your opinion before I buy one.
Soon, Spoiler alert I LOVE IT!
"This right here" was a good video!
Dang! Great job figuring it out!
Is it possible to elimate the mechanical portion of the F-N-R , and just tap into the F-N-R wires on the right side of the cart, and install a EZ-Go switch up on the dash?
It seems more complicated to have to maintain that manual push bar and brushes.
GREAT VIDEOS I am local, do you do customer work? I have a 2018 TXT 48v Lithium and would like it turned up to 25MPH
@@cnj1012000 I don’t have a computer for that
How do you remove a golf cart motor at end of the motor were it attached to the axle it slides into a sleeve that is attached to the axel I have sped Deep Creep but just want turn loose up I don’t want to beat on it Help!!!!!!!
When you switched to the three lithium batteries do you use your regular charger or do you have to buy a different one? Nice video.
@@davidrangel1731 gotta have a charger for lithium since they have a higher voltage range
I have a lot of videos on lithium battery conversions with discounts if you are new to my channel.
Hey Ryan, great video as usual. Cheers! :D
I’m getting one just like this one. Needs batteries is all. Is it possible to gain any speed with these 36V series carts with out doing full conversions?
plum quick sells motors. These series carts make torque with controllers.
@@Fentertainment thanks for the info!
Very good information, thanks professor!!
Hello everyone, looking for a little insight here. We have a 1997 EZGO TXT ran fine but weak batteries upon purchase, we upgraded to 4 12v lithium batteries, 48v 200amp HD solenoid, 48v Alltrax NPX 4634EZ Controller.
Swapped batteries, charge port, etc., labeled all wiring and wired the new controller, solenoid up exactly the same and after the swap the cart ran great for about 5 minutes, came to a stop and took off again and heard a noise kind of like a clunk or pop and the cart died, no power, smell of burnt electrical. Got back to the shop and sure enough the controller was burnt up, the solenoid seemed to be functioning properly, but the resistor was extremely hot, could not touch it. This resistor on the solenoid stayed extremely hot as long as we had the batteries wired in series, I would have to break the series by removing a connection to the batteries before that resistor would cool off.
I am thinking the solenoid was bad and failed during the short test run but I am looking to you all more experienced folks for advice on what to check, am I on the right track with the solenoid or way off base? I am ordering a new controller, but I want to make sure I have the issue addressed before replacing it. Also does anyone recommend someone that can rebuild controllers that have been fried?
My f and r switch on.my yamaha 2001 golf cart
Where are you located? I have been looking for a cart.
I'd love to buy you an adult beverage someday and find out where to look for the deals you find. The F'N R switch does exactly that more than people know.
Had a video a while back showing how to spot deals on marketplace and other places.
Hey Ryan, can I contact you directly. I have an issue that I think you may be familiar with and would like some advice.
Your the man
Where do you find a cart for $50
I mentioned it in a video from a while back. A dealer in my area had several that "didnt run" for cheap. I bought like 13 carts for around 3000.
It’s about time you make a video lol
@@dmax9731 I know man. It was supposed to only be a one week break.
I call clickbait, it’s not a 50 or 100 cart in that condition around here… that exact cart would be $1500 here. If that’s the case I just opened a trucking company. Where you at?
Emard Village
You need to swap hands every now and again bro 😂
Is that like a monage a trios? 😂
Our boy has huge muscles on one arm lol
That is like a $5000 golf cart where I live.