Ahhh just wait until it starts giving you issues, mine out of the box ram 3 prints then melted the hot end fans failed. Had to upgrade almost every component and now it runs amazing
Just got dealt a bad hand. I got my ender 3 v2 neo for 100$ on Offer up with two black PLA spools about 3 weeks ago. I’ve made over 200$ off of that machine and I’m berly 1/2 thru the second spool. I haven’t upgraded at all and the 25$ print I’m selling is a 15 hour print for Milwaukee m12 battery holders. Been printing with no Z axis lines either and I’m SUPER new to this….
Do you have a glass plate or the removable magnetic plate? Some of the new glass beds have wicked adhesion. But like 99 stated try raising your nozzle off the bed on your first layer. You can adjust the z-offset towards the positive direction so the filament doesn't get squished as much into the bed.
Im having an issue where the printing layers don’t match up and it is very hollow with little density, its a hot mess and i kinda wanna get rid of it, any thoughts.
The layers not matching up could be a belt tension issue. Turn the belt tensioner screws clock wise to snug it up a bit. If the printer seems to not be putting out enough plastic then try changing the nozzle and make sure your fan setting it on in your slicer. If the part is hollow with very little infill make sure you choose a different infill pattern then lightning. Lightning can be very hollow......
I tried, the prints that come with the printer(pre installed prints on the sd card) print extremely well and then the ones that i slice myself end up with what looks like under extrusion, any thoughts?
@@Ghostuxx probably a slicer issue then. What slicer do you use? Try adjusting the nozzle temperature up while it’s laying down it’s first layers to see if it improves.
Hey, Ik I’m kind of late but I have a question, in my layer height I set it to 0.05 snd it’s printing extremely slow, how ever I’m scared if I change he layer height the nozzle will touch the print and move it while it’s printing, what should my layer height be (I will do anything below 0.12 but idk what layer height I should set it at) and if you don’t mind can you give me some tips so that my nozzle doesn’t touch the print while it’s printing ?
Regular layer height is 0.20. If you’re printing at .05 that means each layer of the print is only 1/4 of that. I’ve never printed with that low of a layer height before. 0.1 is very low. I would fine tune your printing at 0.2 layer height and then try 0.1 for more finer details.
Dejo la configuración estándar de cura solo para la configuración de retracción a menos que haya cuerdas presentes. Esta impresora aún no ha tenido esos problemas.
When you start the print, open the zaxis adjustment and adjust the head so the filament is lightly squished into the build plate. Also, print with a raft
It has a self leveling feature where it makes z adjustments while printing to make up for a bed that isn't level. Calibration is done by the user experimenting with their slicer......
@@autotech4103 all I'm saying is that i have a 6950xt that I got from Newegg brand new for 750 and I have a r7 5800x3d I got for 300 on a deal. which is probably the best amd system you can buy for just over a thousand for a gpu and cpu thay are top of the line.
Your spool holder is on the wrong side.
yup, it has since been changed. Ideally i could mount it off the side to keep the filament from bending and dragging but who has the room?
No on this side Its better because the filament goes directly in the extruder
@@Z3GONHe meant that it’s flipped.
Direct extruder enters the chat...
Workstation is amazing🔥
Thank you. It isn’t always so clean and nice. But it has its moments.
just got mine and love it when i can get the files to actually work and print XD
You’ll get it all figured out. They are a good lil printer.
gonna get me some blue filament, yes I am!
So satisfying
Ahhh just wait until it starts giving you issues, mine out of the box ram 3 prints then melted the hot end fans failed. Had to upgrade almost every component and now it runs amazing
All 3D printers
Just got dealt a bad hand. I got my ender 3 v2 neo for 100$ on Offer up with two black PLA spools about 3 weeks ago. I’ve made over 200$ off of that machine and I’m berly 1/2 thru the second spool. I haven’t upgraded at all and the 25$ print I’m selling is a 15 hour print for Milwaukee m12 battery holders. Been printing with no Z axis lines either and I’m SUPER new to this….
@@leomarq nice to be making some coin for sure.
Nice, how much did this machine set you back?
$400 CAD
Any recommendations on PLA sticking too much to the point where its actually just stuck? I have the same printer. Thanks!
try letting the bed cool off. or the nozzle might be too close
Do you have a glass plate or the removable magnetic plate? Some of the new glass beds have wicked adhesion. But like 99 stated try raising your nozzle off the bed on your first layer. You can adjust the z-offset towards the positive direction so the filament doesn't get squished as much into the bed.
What program do you use pls I need help
I use Cura. It is a free download. I will post a video on how to use it soon.
th-cam.com/video/m_ftxGbdyFg/w-d-xo.htmlfeature=shared
@@autotech4103 thank you
Prusa slicer
Im having an issue where the printing layers don’t match up and it is very hollow with little density, its a hot mess and i kinda wanna get rid of it, any thoughts.
The layers not matching up could be a belt tension issue. Turn the belt tensioner screws clock wise to snug it up a bit. If the printer seems to not be putting out enough plastic then try changing the nozzle and make sure your fan setting it on in your slicer. If the part is hollow with very little infill make sure you choose a different infill pattern then lightning. Lightning can be very hollow......
@@autotech4103 I appreciate it and I will try these, thank you
I tried, the prints that come with the printer(pre installed prints on the sd card) print extremely well and then the ones that i slice myself end up with what looks like under extrusion, any thoughts?
@@Ghostuxx probably a slicer issue then. What slicer do you use? Try adjusting the nozzle temperature up while it’s laying down it’s first layers to see if it improves.
@@autotech4103 I appreciate all of your help, i have solved the issue by switching from cura to creality and the issue fixed immediately
What file did you use
It was printing a MTG magic card box
Which setting are u using?
Oh boy, that’s a loaded answer. I suggest checking out my videos using the Cura slicer.
@@autotech4103 Thanks bro
Hey, Ik I’m kind of late but I have a question, in my layer height I set it to 0.05 snd it’s printing extremely slow, how ever I’m scared if I change he layer height the nozzle will touch the print and move it while it’s printing, what should my layer height be (I will do anything below 0.12 but idk what layer height I should set it at) and if you don’t mind can you give me some tips so that my nozzle doesn’t touch the print while it’s printing ?
Regular layer height is 0.20. If you’re printing at .05 that means each layer of the print is only 1/4 of that. I’ve never printed with that low of a layer height before. 0.1 is very low. I would fine tune your printing at 0.2 layer height and then try 0.1 for more finer details.
@@autotech4103 ok thanks
que configuración usas para las retracciones?
Dejo la configuración estándar de cura solo para la configuración de retracción a menos que haya cuerdas presentes. Esta impresora aún no ha tenido esos problemas.
I cant get mine level :,(
Make sure the rollers under the plate have been adjusted tight to remove any play out of the plate first.
I hate my neo printer any change will be couple of hours in calibration
They are a hobby printer that takes some figuring. Hope you the best.
how do you get the print to stick can't get mine to stick
When you start the print, open the zaxis adjustment and adjust the head so the filament is lightly squished into the build plate. Also, print with a raft
Also clean the bed between prints with rubbing alcohol
@@JamesJones-tu4pq and keep fingers off the build plate. Oils from hands are not good for adhesion.
Why is it close to the pc? I thought the files were downloaded to a micro usb?
It was just for testing new out of the box. It has a new home now.
Wifi it and run it from your phone
@@rb58761 I like the reliability of the SD card. Power outages and internet problems don’t ruin prints.
Dont count on the pri ter to resume printing after power outage. All 3 of my printers have this function, and rarely does it work.
@@rb58761 if my print is large I will use a raft and tape it down so it doesn’t lose adhesion when the bed cools
Sprite direct drive and add anothe stepdrive
Stock works for what I need.
you should mod it
Nah, I like my printer working.
@@autotech4103 wdym?? mods make the printer work better
@@Juisheywhat mods?
@@autotech4103tell this to my 500mm/s printing ender 3 v1
does ender3 neo v2 have automatic calibration?
It has a self leveling feature where it makes z adjustments while printing to make up for a bed that isn't level. Calibration is done by the user experimenting with their slicer......
ρɾσɱσʂɱ
I’m going to take that as a good thing
@@autotech4103 lol
@@autotech4103 😂
Angcubic kobra neo is better
They are both good but I prefer the Vyper currently.
Sovol sv06plus
ewwwwww you bought an omen pre-built 😭😭😭😭😭
Yup. Have you priced out your home build vs the Omen with the same specs? Those chips are way overpriced right now
@@autotech4103 what are the specs. and stuff have been decent prices for atleast 6 months now
@@autotech4103 all I'm saying is that i have a 6950xt that I got from Newegg brand new for 750 and I have a r7 5800x3d I got for 300 on a deal. which is probably the best amd system you can buy for just over a thousand for a gpu and cpu thay are top of the line.
@@autotech4103 so there are good deals and you have to look for them
@@tylershg RTX3070i with a I7 processor. It has 1TB of solid state and other nifty things I have yet to learn about lol.