ENDER 3 V2 VS ENDER 3 V2 NEO COMPARISON
ฝัง
- เผยแพร่เมื่อ 5 มิ.ย. 2024
- USA Shop: 2.ht/u ::: CAD Shop: 2.ht/c ::: FREE Support Forum: 2.ht/s
PJ is here to compare the Ender 3 V2 and the new Neo,
What printer is right for you?
Buy both here at...
NEO
3dprintingcanada.com/products...
3 V2
3dprintingcanada.com/products...
Follow Us On Social Media:
Facebook: / 3dprintingcanada
Instagram: / 3d.printing.canada
Twitter: / 3dprintingcan
Our Address:
36 Ditton Dr., Unit #3
Hamilton, Ontario
L8W 0A9
Telephone:
+1 (905) 963-9066
Sales Email:
contact@3dprintingcanada.com - วิทยาศาสตร์และเทคโนโลยี
![[UNCUT]"เศรษฐา" โดนบีบให้ลาออก เผยดีลลับ "ทักษิณ" ต้องต่อโปร ไม่งั้นเจอจุดจบ! I คนดังนั่งเคลียร์](http://i.ytimg.com/vi/XlH3k81dxmE/mqdefault.jpg)
Just received 2 days ago my 3v2 Neo bought from you. First 3d printer, so easy to use. So far no problem at all, printing 15-20hrs file perfectly! I'm happy about this printer
this video helped me even though I already ordered the Ender v2 neo but I wanted to know the difference between to two and jugging on you said with the V2 Neo's features I made a good choice for a 3d printer. keep up the good work I think your content is really good you helped a lot understanding what come with the two and honestly I thought parts where funny.
Great comparison of the 2, Thank you and your camera man
Swear his shirt said HD Home Depot, before I actually looked. Great video.
i just purchased the neo thanks to you. Awesome
Very informative comparison, Thank you! Keep it up!
Nah
Very informative video mate, thanks!
Thank you for the video, very helpful!
Glad I found you, I've been undecided as a 3d virgin, very helpful
Just brought Ender 3v2 Neo as my first 3D printer, work fantastically well ❤
Definitely recommend it for anyone looking for their 1st printer.
How is that a rational thought? How can you recommend something when you've only tried one product in a particular variety? How would you know whether it's good or bad?
@@pleonexia4772 how about its their first 3d printer, and they liked it? That's rational enough.
@@pleonexia4772 because he was expecting something and he got it regardless if there are better ones.
@@pleonexia4772you ok? Jfc
@Pleonexia what? Who asks "how is that a rational thought" when the OP didn't offer any form of argument?
Are you just a douchebag in real life?
Came into the store today and you mentioned the TH-cam video turns out I already had watched this one
Wow my neo has the 4.2.2 board good job on the comparison
Great info. How upgradable is the v3 se?
Do the ender 3, 3 v2, and 3 s1 all have the same frame setup? I've only been able to look at pictures, I'm thinking of buying a broken 3 v1 off if eBay for the frame and bed then get the rest from other places to save a bit of money and also to upgrade it for the future. Are the frames the same?
Hi, do you think is good idea using smoothers with Ender 3 Vs´2 Neo? Thank for reply
What is the pest choice between Ender 3v2 neo and ender s1 (standard, not the pro).
Is the neo much better because of it having the metal extruder (where the s1 has plastic one). Or is the double drove more important on the s1.
I do not have the ability to upgrade anything because of struggling to get parts where I live. So which one is a better option?
Hey, awesome video, client from Canada. Do you have a coupon discount link to your site ?
will you be testing out the new titan extruder+ for the neo
Is the dual z axis upgrade compatible with the V2 Neo?
Is the Neo not able to be upgraded with newer parts like the V2?
I wish I bought the V2 instead of the Neo. Creality changed the extrusions for the X-axis, Z-axis, and top gantry so there are less options for modification.
I had heard this. I decided that the Neo will be a great first printer for me, a 3d printing noob, though not a robot noob (built a CNC from scratch). I am going to use this to get up to speed and eventually replace it with a Voron or VZBot printer long-term.
@@stevenbjerke2825 The NEO works so well out of the box after a little tuning.
@@livedeliciously Exactly! The only thing that needed calibration was the the extruder. I am currently printing the parts to put a Hero Me Gen 7 cooling system on it since the one-sided cooling is obvious (to me) on my prints.
@@stevenbjerke2825 does the hero me support the NEO?
@@livedeliciously Gen 7 does, not sure about gen 6
Hello, anyone know how to save the gcode in the micro sd to see on the screen the figure in the ender 3 v2 neo? It brings two gcode files on the sd that comes and they are seen but the ones I save are not seen
Why do I feel like the GUI of the controller is just controller firmware? Anyone upgraded to this on their 3v2 ?
Do you suggest Neo for the first device of entry lvl beginner? Me… 😅
I bought the Ender 3 V2 Neo on Dec 2022, but it's got a 4.2.2 board.
And, on the download page you only get firmware for the 4.2.2 board for the Neo.
Are you sure your Neo has got the 4.2.7?
Mine has a 4.2.2 board
How would you compare the V2 Neo against the S1?
Cause it is comparable! crtouch is same. hot end is far more better one... With bi-metal upgrade it's much much better fans and board is better motors much more silent... S1 has only direct drive Extruder and 2 motor Z-axis... Which can be installed with upgrade easily on ender 3 v2 Neo. But Z-axis is not a big upgrade in my opinion. Best upgrade for ender 3 v2 Neo are direct drive Extruder with CR6SE bi-metal heatbreak upgrade
i bought the neo ass a fist printer can.t be more glad i did and got a cr 10 with that i had more problems withe the cr10 with evrey thing from bed leveling to the cr10 just falling apart but so i use the neo more then the cr10
what are the noise levels like? is the neo any better than the v2?
That's one of life's mysteries pal
anycubic kobra go or Neo v2 ???
I'm looking at a NEO for my first printer, but can get an S1 on a deal for just £30 more ... would you recommend that for future proofing in case I want to use different materials?
Yep
Great video, very good details in the comparison that I did not know! I got the V2 Neo a few months ago as my first 3D printer. It has worked and I love it! One question I have is why is my printer not displaying the model of my designs before printing like you show at 4:38? It displays the test files of the boat and rabbit as you showed but not my models. Could it because I am not using the Ender slicer? I am using Cura instead. It's not a big deal but it would be cool to see the model of everything before I print.
I am having the same issue! I am also using cura with my V2 Neo.
@@ducttape4tubas Check out this link, it's a very straightforward and a great tutorial:
th-cam.com/video/Q-OA9_t9bGc/w-d-xo.html&ab_channel=CHEP
Let me know when you try it if it works. I haven't tried it yet since I don't have a 8gb microSD card. I think it will solve the problem though.
you have to export a image file to the card for it to work and show the image, i found out myself after searching youtube as i got a Neo as well for my first printer :)
@@erickirk1920 Can you do that with Cura or do you have to use the Creality slicer to do that , or is it something you do independent of the slicer?
@@stephen240 this is for the ender v2, there is a comment in the comment section that says it doesn't work with the v2 neo yet
Is the ender 3 v2 dual z upgrade kit compatible with the ender 3 v2 neo?
Yes. I upgrades mine.
I just bought the Ender 3Neo and mine has glass bed, does not have the same display screen, does not have the blue knob for the filament as stated in your video.
Ender 3 Neo is different than the Ender 3 v2 Neo. We reviewed the V2 Neo.
@@3DPrintingCanada Interesting...I just assembled my Ender 3 V2 Neo and the same parts are missing or different than your review, no knob, different display screen and a glass bed....
Why are the "yellow" springs better than steel springs?
Stiffer and hold level longer
Yellow ones are stronger. The red ones are faster. Sorry, could not help it.
Getting an Ender 3V2 and purchasing the upgrades that are included with the Neo is still cheaper. The glass bed lasts longer too.
How can the v2 neo be better and the v2 more expensive i don't get it
its not though
@@diamondly6250 could you explain?
Ill do you one better.. How can the neo be more expensive than the v3 se?
Lol I love Jared
ARADIĞIN TÜRK YORUM
Electronical isn't even a word
So not worth the money....I have all this on my ender 3 v2...
Get the Sovol Sv06 instead