Boa noite poderia mostrar como foi feita a ligaçao entre o Termômetro Digital Industrial Xh-b310 e o Termostato Digital W1209 vi o link onde mostra mas pra mim nao entendi como as duas placas se comunicam
amazing product Tommy, can you do a full video so I can see the whole process and make my own machine for our studio. We are on a tight budget :(((((((
You dont want one of theses for the studio, they are slow and labor intensive. The reson i gave this project away to the internet as open scoue after inventing it for foster and partners in 2018, is coz its great for eduction about local reyling but too time and labor consuming for long term production use. You end up not using it coz its annoying to make the filiment, plus you only get short lengths so unless you want to spend even more time joining filiment then large prints are a pain. Try something more like th-cam.com/video/8uUWhh95LAk/w-d-xo.html or th-cam.com/video/MRQKmRvfZMI/w-d-xo.html
Hi Tommy. I made my own flavor of pullstruder machine and it works very well if pet ribbon if 6.5mm width but with 8mm ribbon width the robbon got jammed and I cannot pull strong enought to got the filament out. When I use 6.5mm I can pull filament easily and I made my firts filament tests and print some test pieces. I use a volcano block hot end and I made a chanfer in the input hole of the ribbon. I made the hole with 1/16 drill bit and 3mm drill bit hole in the input of nozzle. I dont sure why 8mm ribbon is not pullable but 6.5mm is.
@frjavi73 Thank you for your comment. That is probably due to the thickness of the PET bottle. Generally, PET bottles for carbonated beverages are thicker than those for mineral water, and the thickness varies depending on the beverage manufacturer. If they are thicker, even if they are cut to the same width, they will have more resistance and cannot be pulled. I prefer a thickness of about 0.2 mm! I make my filaments by changing the width of the cut depending on the thickness.
@@tommy3dp Well this is 0.2 (with my digital caliper). I supose I will have to try with non volcano block and see what happens. Maybe the longer nozzle cause this or maybe the 3mm hole I have to make longer inside the nozzle. Anyway I apretiate very much your repply. :D
個人的に一番好きなニッチジャンル「ペットボトルをリサイクルして3dフィラメントにする」だー！日本でもやってくれる人いて嬉しい！
ありがとうございます😊
自分で作れると楽しいです♪
amazing i love seeing people reimagining my invention from 2018. Keep up the good work!
thank you!
Boa noite poderia mostrar como foi feita a ligaçao entre o Termômetro Digital Industrial Xh-b310 e o Termostato Digital W1209 vi o link onde mostra mas pra mim nao entendi como as duas placas se comunicam
完成品が欲しい製品ですね。３Dプリントしてて、フィラメントが一番消費しますから（当たり前）。失敗作を溶解して元のフィラメントに戻したいなとすら毎回思いますよ...失敗しまくり。
よくわかりますw
失敗作を粉砕してフィラメントに戻す取り組みをしている方もいらっしゃいますね。
ペットボトルフィラメントは知識のない私でも作れたので、自作チャレンジも面白いですよ
@@tommy3dp アーリーでポチっとしちゃいました♪～ フィラメントのサポート材や土台も溶解してフィラメントに戻したい（笑）
❤Thank you❤
HOW WIDE IS THE BOTLE STRIP IN MM THANKS
It depends on the thickness of the bottle. I measure the thickness and cut between 7-9mm.
The width of the cut is also adjustable.
amazing product Tommy, can you do a full video so I can see the whole process and make my own machine for our studio. We are on a tight budget :(((((((
Please make full use of translation software. More information can be found here🤗.
note.com/fisherkijima/n/nf994eaf13e60
google "PullStruder", you'll find tutorials and information.
You dont want one of theses for the studio, they are slow and labor intensive. The reson i gave this project away to the internet as open scoue after inventing it for foster and partners in 2018, is coz its great for eduction about local reyling but too time and labor consuming for long term production use. You end up not using it coz its annoying to make the filiment, plus you only get short lengths so unless you want to spend even more time joining filiment then large prints are a pain. Try something more like th-cam.com/video/8uUWhh95LAk/w-d-xo.html or th-cam.com/video/MRQKmRvfZMI/w-d-xo.html
これって太いフィラメントを1.75ミリまで調整できるのでしょうか？
ペットボトルではなく、PLAやABSなどの市販フィラメントを細くするという事でしょうか？
やった事はありませんが温度条件が出せて冷却機能を追加すれば可能だと思います。
初めまして
実際に作成してみようと思うのですが対応できる３Dプリンターでおすすめの機種などありますか？
初心者なのでそこらへんがわからなくて．．．
まだ3Dプリンタもお持ちないのであれば、まずはお好き3Dプリンタをなんでも良いので導入してからご検討下さい。
これを作りたいのであればFDM方式3Dプリンタなら何でも良いです。
@@tommy3dp
ありがとうございます🙇
アリエクとアマゾンどっちがおすすめですか。
少しでも安くならAliexpress、少しでも早くならAmazonですね。
私は全てAliexpressでした
I want to create pla 1,75mm How wide does the strip have to be?
It depends on the thickness of the PET bottle. If the thickness is 0.3mm, the cutting width is about 7.5-8.0mm
プリントアウトしてるとこまで見たかった
たしかにそうですね～
アップしたのでどうぞ！
なんと！最高！ありがとう！！
Hi Tommy. I made my own flavor of pullstruder machine and it works very well if pet ribbon if 6.5mm width but with 8mm ribbon width the robbon got jammed and I cannot pull strong enought to got the filament out. When I use 6.5mm I can pull filament easily and I made my firts filament tests and print some test pieces. I use a volcano block hot end and I made a chanfer in the input hole of the ribbon. I made the hole with 1/16 drill bit and 3mm drill bit hole in the input of nozzle. I dont sure why 8mm ribbon is not pullable but 6.5mm is.
@frjavi73
Thank you for your comment.
That is probably due to the thickness of the PET bottle.
Generally, PET bottles for carbonated beverages are thicker than those for mineral water, and the thickness varies depending on the beverage manufacturer.
If they are thicker, even if they are cut to the same width, they will have more resistance and cannot be pulled.
I prefer a thickness of about 0.2 mm!
I make my filaments by changing the width of the cut depending on the thickness.
@@tommy3dp Well this is 0.2 (with my digital caliper). I supose I will have to try with non volcano block and see what happens. Maybe the longer nozzle cause this or maybe the 3mm hole I have to make longer inside the nozzle. Anyway I apretiate very much your repply. :D
Gracias, Muchas Gracias de verdad, me sirve, buscaba esto
Crucemos los dedos para que ayude.
細く引き伸ばした後冷やしたりはしていますか？
いえ特に冷却は必要ありません。
ノズルを出てから200mmぐらい室温冷却して巻き取るだけです😊
ABS樹脂でできたピンポン玉を細く伸ばして同じようにできますかね……？
@@sukaru5008
一定の幅でリボン状にする事ができれば出来ると思います。
Thank u
Stl for the cutter?
hear!
note.com/fisherkijima/n/nf994eaf13e60
GRAZIE tanto . Ho problemi ad avere una regolare striscia
Super video
💯
Great job congratulations, can I have the stl file of the wheel. Thanks in advance
Thank you Carmelo!
Please access the link in the video description, Step file is available.
❤good❤
good 👍
❤klas❤
Неплохо, мне понравилось
Концепция - "легко для всех".
こんなことできるんですね！
@@777kk2 ゴミから再生フィラメントにして3Dプリンタで好きなものに作り変える事が自宅で出来ちゃうんです🤗
PLAとPETでは熔解温度が違うので、3D プリンターの見直し購入が必要になる動画ですね！！
でも、リサイクルは良いと思いますが、かなりの出資が必要です。
@@--taku9060
機種によりますが、オールメタル化するにはヒートブレイク交換なので数百円可能です。
最近の機種はすでにオールメタル化されていて300度謳っているものも少なくないですね。
@@tommy3dp
最近のはしょうでしょうけど、数年前に買った物は、200℃前後が限界です。
また、私の物はヒーター温度を上げるだけでは無理です。（ソフト的にも）
PETのリサイクルは簡単そうにも思いますが、500㏄ペットボトルでは繋目を接着出来る機材も必要で、PLAのリサイクルも簡易的な物でも、費用がかかります。
PAL端材を高く買って欲しい所ですが、条件の良い所はありません。（当然ですが）
PLA・PET以外のプラも在庫としてありますが、フィラメントにする機材の価格は改造費も考えると、捨てるか、、、になります。
Pls STL files