@@ToryDelury Hi Hope you are doing Fantastic! Apparently, I won lol I didn't even know you had a draw lol may want to take a look Have a Favorite day 💚🤟
@@LivingProcess incredibly I won too...and still can't find evidence of a draw 🤔 - I'm glad I saw your post. Interestingly I have to now have "un-won" the draw - the reply has been deleted. Super-sketchy
Regarding 12/24 V, if your system runs off your battery boxes (12V cig plug) then they are 12V. If not, Amazon has small and inexpensive up-converters to go from 12 to 24V. Glad to see you wearing eye protection while drilling (and yes, always use plastic gloves when using the drippy sealant!) 👍
which may explain the power draw... has to use internal or somewhere along the line to 24 v transformer. I do see devices every now and then that say either 12v or 24v or even up to 36v
Two tools I would recomment for this kind of install. As English is not my main language, I have to descibe them, as I only know our name for them. Christmastree drill/ Stepdrill: A drill that gets bigger and bigger, so the size of the hole is only how long you keep going. Deburr (according to Google translate): a small curved "blade", that you use to smooth out the edges of the hole, prevents cuts that can "hurt" the cable. Labeling your cables is so undervalued, that is a pro-move! Bending cables to hard, can be damaging to them. Having a piece of extra wire/string, that you can put through the gabs, tape/tie them together and pull it through with that :) Good job
I love that little drone. I don’t do well with technology but it sounds simple. I’m so impressed with the few young people that are ambitious these days, and take the bull by the horns and jump right in. I’m sincerely impressed with your get it done attitude. Please stay safe out there.
The only thing I need to let you know is: You must put sealant behind the bracket not just on top of the bolts/screws. Water gets behind the bracket and below the bolt. You went all around the base of all the brackets except the brake light I think so that should work. I don't want water getting behind where you cannot see it and get mold from a small leak in the rain especially when driving.
I used to work in surveillance including installing and manning the cameras. I work in multiple casinos, department stores as surveillance and investigation and as a private investigation and I am amazed at how surveillance systems and cameras have changed since the early 90's when I started until now. It is so much easier but I do miss old types, now anyone can do it.
BLINK - Hi Tory, I have a complete blink system on my home. The cameras are good for objects close up 10feet. After that they leave a lot to be desired. Also I have overlapping coverage which doesn't work because the system seems to favor one camera at a time. Though you can change the record time you can't change the 10 second delay between clips. That's a big delay for a security camera. Since you purchased blink I hope this helps JB
I'm impressed with the access that you have in the Van for electrical and plumbing. that is very convenient you don't have to drill holes inside the van. I do recommend you have avenues for running wires like in the upper corners and not run those diagonally through the walls. if you add an accessory later on, you don't want a danger of hitting a wire or cable when you screw or drill into the wall. if the cameras are 24V, they will not operate on 12V. it's too low of voltage. my guess is the cameras are 12 Volt but can handle up to 24 volts.
Hi Tory, don´t worry your cameras and screen must work from 9 to 36 Volts DC, that means you can connect directly to your 12 V system without problems, as well if it worked with your power station means that will work with your main 12V system. Greetings from Mexico.😊🚐
I’m a dad and I hope this isn’t presumptuous or out of line, I just wanted to say that you are looking much healthier since you moved back to your parents’ place. Hope the van build continues to go well 😎
I was trying to figure out how to say the some thing! She really does look better. You really do have a brighter glow, Tory, now that you have some, security maybe. Whatever it is, you are doing the right thing, Keep it up!
Tory I am always so impressed with your ability to take on a task you've never done before and plough through it like a dog with a bone. You just don't give up. I work in surveillance and watching you plan and execute this task, I feel like you could get work as an installer. Your common sense approach and long term install planning are pretty clever. Well done.
I have the same ones for my box truck. It works on 12v or 24v. Read the instructions if you have them or online. The watts it pulls is the watts it’s still going to use no matter what you plug it into. Add more solar or another battery if it’s that big of a deal or turn it off when it’s not needed.
Just like a typical DIY project everything goes wrong 🤪 😂 it turned out great 👍 I like how you can see all the camera angles at once 😎 give yourself a pat on the back for a job well done 👍
Great video! I've been searching for a surveillance camera system for a while now. I really like that this one lets you view four cameras simultaneously and in real-time. I was looking for cloud recording, dash cam features, parking mode, notifications for movement or intrusions, and built-in GPS. I decided to go with the BlackVue DR750X-3CH. It has only three cameras (front, back, and interior), but the ability to remotely view my van was one of my top priorities. I can pull up the camera feeds on a 14" tablet inside my van. I’ve wired the cameras to my coach batteries and have onboard WiFi, which are important prerequisites for remote, cloud-enabled surveillance cameras and dashcams.
I am absolutely impressed on your handyman skills and exhausted watching the labor and effort you displayed! Continue your work journey and informative videos
Brilliant as always 💚 Oh?! You installed the panels 🎉 Cameras are definitely a great idea not only for safety but can be used for insurance and other information. Have a Favorite rest of week 💚🤟
I love what you are doing and you are learning on the go But thinking about the future and sealing holes etc. Great work. I am nearing the end of my life but having fun, so it is so refreshing to see you at your early stage of adventure
Wow, thats great you install ed the cameras!! Im so glad you did , because I was getting worried about you!!! Those cameras look like they are really high quality which is great!! Im so glad you will be alot safer with the cameras!!!
Bonjour Tory, l like this video very much, very impressive the way you did managed all those operations to fix the camera. It's a huge plus for all the owner of van to be confident to install them 🙏👌 👏👏Thank you 😊 Be safe and happy 🙏🌞😊
As an electrical engineer I have seen the input described as 24 VDC even though the specifications state a wide input range such as 9-36 VDC, on many devices. The fact that it comes with a cigarette lighter connector for power strongly suggests that it works on 12 VDC.
Thanks for the humor in the first few minutes of this video as it really kept me interested. it's difficult to watch a lot of these build shows because they are so boring. Trav ❤❤
I've been watching your videos for a while - I think your videos are instructive and real-world But I think this is the first time I've seen a YT video where the sponsor is providing something which is demonstrably useful! F*ng A to you 💪🏻
Hey Tory, Your power packs will be outputting 12v from the cigarette lighter so your cameras will run fine hardwired. I would trust what it says on the box over what Amazon says
@@SuperJoeycooper Amazing, thanks for the help! That explains why it kept changing V throughout the website, instructions, and box haha. I appreciate it! :)
I picked out the bluetooth version. I didn't have to put in any wires. I feel that it's better. ❤ There is also make the cameras that sit in the doorway in the perfect angle from the front to watch the front door side doors. And your back area. But those are definitely with wires. When I do purchase mine, I'll make a video of it. When I have time this fall I'll also make a video of the Bluetooth version cameras. I own on the van. I'm glad they made the Bluetooth version. I hate wires.
I put an amazon link for a 24v to12v converter on another comment below. Great job Tory absolute tough job when you have to trace and run wires, such a tedious time consuming job, not only that but putting more holes on the van, your a trooper Tory. Your addition of footage capturing drone it's cute. Thanks for Sharing and keep up the great job...
Good work! If it turns out the cameras are 24v you can easily get this by putting two 12V batteries in series (the free way), or using a converting device (about $20 US). You can reduce the power draw by tweaking your settings (such as screen saver function of the display, recording only events vs 24/7, etc.). Most folks go 12v to have the largest possible number of choices available. Nothing wrong with this choice. Increasing the voltage is really only needed for folks who have large power needs. Renogy has a decent 12 v vs 24 v vs 48 v article I recommend you read if you have the time.
BTW the surval camera company would have a recommendation on the voltage converter. But Amazon has a ton of them. 12v to 24v Converter 5A 120W Step Up Converter. Just find out the amperage you need to handle.
Tory... check your State in Maryland for instance u could get a repair citation for not having a 3rd stop light (highmount) stop light.... I was a MD state inspector for 20 years... Love U ! and you're video's
FYI, Silicone you can never paint so it tends to be a bad idea. You can smooth the finish of caulk by dipping your finger in paint thinner/mineral spirits and dab or run finger along to smooth. When caulk starts to stick again dip again.
The cameras probably have a power converter inside with a wide input range. The leaflet inside the box should give the voltage range. They draw more current at night to power the LEDs. Check on the display at night if there is a difference between 12V and 24V.
@Tory Delure if you want a clean finish with any kind of sealant, use painters tape around the perimeter of what you are sealing. Tape, lay down sealant, wipe up the extra sealant, and peel off the tape to reveal a nice clean edge. Cheers!
Hey Tory, as far as the cameras go, (the 12v vs 24v thing) it won't hurt them, they just simply won't work. Anyway, good luck on the build and stay Safe! As always, BIG HUGS from Tennessee! ❤
If your worried about 12v, 12v is less than 24v, you can just *plug it in*, and see if it works, normally they do. if it doesn't work, nothing bad will happen. But if you where plugging a 12v device into 24v that would be bad, it is ok to plug something that needs more voltage into something that doesn't have enough. My LG monitor takes a 19v power adapter, I have it running on 12v without any problems, inside the monitor just converts anything >8v into 5v for it's actual use, but it makes it easier to just support anything from 8v to 26v and use a 19v adapter for everything instead of making things different. (The camera systems I see on amazon support 9v to 36v)
Those long coils of cable are probably chewing up some of your power. The nuts that don't fit are probably a different threading. You can get some nuts at Lowe's to solve that problem before you get up to highway speeds in the van. If you think the threads on the bolts are damaged from the nuts, you can get a threading tool to fix the bolt threads.
Hi, Unless mistaken I'd say a suitably rated buck-converter should take care of your 12v to 24v issue. Loving the van build vlogs. Keep up the great content.
Interesting video. Well done for taking a tricky job on. Also, please wear suitable shoes to protect your toes while you are working and climbing a stepladder. I found this out the hard way.
@Tory Delury, I noticed that you used zip ties around the excess cable, and you might regret it later on as you'll need to cut them everytime. Try to using velcro ties for cable instead. Plus, if you need to move or extend the length, it will help. Also, make sure the cables can handle the amperage of voltage because the more power can melt the wires or the device. The cameras are a great idea for your security and for mental concerns. Good luck with the van build. A fan from Las Vegas,Nv
You put masking tape about 2 or3 mm around the camera mounts. Apply the black silicon seal, then peel off the masking tape. You should have a perfect even line of silicon seal. going around the camera mounts.
if you plugged into your cigarette lighter on power station that's 12 volts so they worked they may be dual voltage. but to run 24 v off of 12 v a buck converter works there's also converters to run 12 v off a 24 volt system . just need to size for the amp draw , so you said it drew 10amps so the converter needs to work on 128 watt i buy 150watt for margin but i think your good to go . and if your system gets too stressed add a 12v battery just for cams following several promasters i recently found 2021 1500 136 low roof with 18000 miles i not doing a live in but dual use camping with mostly portable gear but will add solar
Happy to have found your channel and i subscribed. I’m trying to do some security stuff on a band van. Its a passenger van so its not as open inside but I’m figuring locks window film etc. just happy to watch the DIY stuff and motivated to get it done.!
lot of work. I think I'd have painted it all white to match van color, give maybe a bit more stealth factor, but maybe not so much. Of course later if wanted to match van color, could still spray them white. I would consider weather and road hit bugs would obscure the front camera more often than a dash mounted camera, and more stealth to dash mounted camera, less rain problem and no bug juice hitting it.
It can be a lot easier and neater looking (and less of a mess!) if you mask off the areas you want to seal with blue painter's tape before caulking. Then just caulk it the way you did, wipe off the excess like you did, and remove the tape. You end up with a perfectly straight caulk line, and you can throw a lot of the mess in the trash.
For the camera’s. Just check with a multimeter what voltages they are running at now. If that’s 12, don’t put 24 volts in it, before you connect them I’d just check again just to be sure. If they need 24 volts, and you have 12, you can get a step-up-converter. I hope that makes sense lol.
Amazing everything you/your hard work/information/your contribution thanks with lots of ❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤ again thanks for making this video ❤❤
It can use 9-24v, so will run off 12V. It does use 10watts to use tho, but kind need them for the security cam functionality you're looking for vs Blink. But a single 100AH battery could run it for 6 days. Assuming you're getting solar system + batteries it could pretty much run it forever. You could have a low power WiFi running just for the Blink cams but they also need access to internet to connect with your phone. You could colab with TH-cam people that make projects with raspberry pis to make custom security cameras to do exactly what you need and possibly use less power. I doubt it would get less than 2-3 watts of power usage though. So might not be worth the effort
Hi, you will need a 12 volt to 24 volt DC-DC converter. You will not do any damage if you plug them into your 12 volt system, but they wil not work properly. Dave
Regarding the 12v/24v possible snafu.. if it came with a cigarette lighter power adaptor and it is working like it is now, you should be good. Take a look at the power supply on the device, it will tell you what it operates at… and most if not all cigarette lighter plugs are 12v you have your voltage satisfied.
I would keep the camera cable and connector as close to the camera as possible, in case you need to replace any of the cameras. Hopefully you won’t have to, but if you do you maybe able to pull the camera out, disconnect it and replace with new camera.
Did you really figure out all the wiring and do it by yourself? If so, you're talents truly go above and beyond 🙌🏼 I couldn't even install my dash cam system on my Promaster, ended up going to BestBuy and begged them to do it, lol. Thank you for the video and the cctv link👍🏼
Sweetie you're fine wiring them to your 12 volt system they work with anything from 9 volts to 36 volts the only difference is at higher voltages it pulls less amps and a lower voltages it pulls more. You will be fine plus you did a nice job. I am a van lifer who owns a house in Ecuador but works in Miami as a aviation aircraft maintenance inspector. I have a master of science degree in aeronautics plus I used to teach college kids how to fix airplanes so I think I know what I am doing. If you are worried about them putting too much energy just get more lithium iron phosphate batteries, they are dirt cheap right now. I have three 300 amp hour batteries totaling 900 amp hours hooked up to a 300 amp alternator on my T1N Sprinter. They cost about $450 each right now
There's an easy solution for the 12v. There are converters that would step down from 24v to 12v. Plenty on Amazon, but carefully choose high quality ones.
Hi Tory, thanks for the video, really helpful and informative. I have the same cameras with an 11 inch android 11 tablet. I was a bit miffed because it was supposed to be android 13 also the tablet was to be 2.8 8 core and when it arrived found it is 1.4 4 core processor, really slow. Unfortunetly you can not trust all the things that Chinese companies advertise online. I don't have it installed in the Campervan here, Motorhome there as yet but after watching your vid have a much better idea where to place the cameras and how to go about installing them. I had noticed it uses a lot of battery. So I will run mine from the leisure battery only that has a solar panel. I am also going to install interior 130 db sirens and strobe lights for security. But I am making the relay wiring myself, if the alarm is on and the doors are unlocked or opened the interior strobes and sirens go off. .. Anyhow thanks for sharing and keep up the great videos...Ray
Hope nobody steals the cameras. Looks easy to remove them and take them home. Replace those easily removed allen head screws with anti-theft screws that require a special shaped head tool to tighten or remove.
I would be very pleased that a hardwired system of such complexity is only pulling 10watts (.78amps). Sure that adds up to 19 amp/hours per day, and that is a lot, but the security of having them hardwired and not needing to recharge batteries is for sure the way to go. Plus, you probably will not have them on all the time.
Good informative video for video security installation. Thumbs up! I am wondering whether this might be also used as an effective substitute for a rear-view mirror while driving. That would of course require mounting the display monitor screen somewhere on the dash panel so that it can easily and safely viewed while driving. 🤔
My Starlink and my cameras use a fair amount of power. I’m actually thinking of going to a battery powered system and then just charging them up every so often. There’s also a way to change your Starlink to 12 V and I thought about doing that also 🤔
Are you building a submarine? The first thing that will give you errors are the power connection. Make that waterproof and solder the wires. The nuts will probably come loose because there I no nylon ring in it. Or use Locktite to secure te nuts. But hey, easy to say from a desk inThe Netherlands, you're building a campervan!!! Good work and keep learning!
I use a small UPS on my home security camera system and the main issue that I find with power usage is (heat) keeping the board of the computer system cool so I installed a small fan and the HD... I don't know if your system has a HD for self storage... Your screen would draw the most power maybe 10 (watts) so Using your phone to watch would be the best option. (The cameras even with IR lights on barely draw more than 1.5 watts.) If that is the case the device would be using wifi or bluetooth and those are pretty low wattage (bluetooth being the lesser). If wifi Check if there are settings to adjust your wifi DB broadcast range. If you have the max or average wattage rating off the box you can then do some quick math to find out how long it will last before you get close to damaging your battery''s if you're using acid or just need a recharge if you're using lithium. Battery system rated @ 680AH Then use the formula for converting Amps/Hours into Watts. W=AxV.. 680 x 12V = 8160 Watts.. Then you know how long you have! First time seeing you. Looks like you're having fun :)... Oh like the other guy said. if your camera system is running on your Jackery it's 12v. If you want to double check grab a multi-meter to check it yourself. Good tool to have btw.
Inverter will fix any voltage issue, however the package and information on the cameras is seen as the information you should follow in regards to what is contained within. If you try to draw 24 volts out of a 12 volt system i think it will just not work to be honest.
Learn More About HoverAir X1 - noxl.ink/6hYr85
And Learn More About This Installs’ Costs & Materials In The Description 🌼
The HoverAir looks so much fun and easy to use. You said it lasts 11 minutes or 32 GB. When you were hiking, how many batteries did you go through?
How'd you get in touch with them? I've been trying to reach them
@@ToryDelury Hi Hope you are doing Fantastic! Apparently, I won lol I didn't even know you had a draw lol may want to take a look Have a Favorite day 💚🤟
@@LivingProcess incredibly I won too...and still can't find evidence of a draw 🤔 - I'm glad I saw your post. Interestingly I have to now have "un-won" the draw - the reply has been deleted. Super-sketchy
@@SimonWad Definitely not replying lol hopefully it was Tory Have a Favorite day!
Regarding 12/24 V, if your system runs off your battery boxes (12V cig plug) then they are 12V. If not, Amazon has small and inexpensive up-converters to go from 12 to 24V.
Glad to see you wearing eye protection while drilling (and yes, always use plastic gloves when using the drippy sealant!) 👍
Truck lighters are also 24v, amazon reports cctv truck, so despite the plug may fit a 12v outlet, the device run at 24v.
which may explain the power draw... has to use internal or somewhere along the line to 24 v transformer. I do see devices every now and then that say either 12v or 24v or even up to 36v
Two tools I would recomment for this kind of install. As English is not my main language, I have to descibe them, as I only know our name for them.
Christmastree drill/ Stepdrill: A drill that gets bigger and bigger, so the size of the hole is only how long you keep going.
Deburr (according to Google translate): a small curved "blade", that you use to smooth out the edges of the hole, prevents cuts that can "hurt" the cable.
Labeling your cables is so undervalued, that is a pro-move!
Bending cables to hard, can be damaging to them. Having a piece of extra wire/string, that you can put through the gabs, tape/tie them together and pull it through with that :)
Good job
The drill bit is a step bit and yes. Highly recommend. And a round file would debur the holes as well.
I love that little drone. I don’t do well with technology but it sounds simple. I’m so impressed with the few young people that are ambitious these days, and take the bull by the horns and jump right in. I’m sincerely impressed with your get it done attitude. Please stay safe out there.
The only thing I need to let you know is: You must put sealant behind the bracket not just on top of the bolts/screws. Water gets behind the bracket and below the bolt. You went all around the base of all the brackets except the brake light I think so that should work. I don't want water getting behind where you cannot see it and get mold from a small leak in the rain especially when driving.
Came to say this. The forward camera holes will leak for sure.
I used to work in surveillance including installing and manning the cameras. I work in multiple casinos, department stores as surveillance and investigation and as a private investigation and I am amazed at how surveillance systems and cameras have changed since the early 90's when I started until now. It is so much easier but I do miss old types, now anyone can do it.
BLINK - Hi Tory, I have a complete blink system on my home. The cameras are good for objects close up 10feet. After that they leave a lot to be desired. Also I have overlapping coverage which doesn't work because the system seems to favor one camera at a time. Though you can change the record time you can't change the 10 second delay between clips. That's a big delay for a security camera. Since you purchased blink I hope this helps
JB
I'm impressed with the access that you have in the Van for electrical and plumbing. that is very convenient you don't have to drill holes inside the van. I do recommend you have avenues for running wires like in the upper corners and not run those diagonally through the walls. if you add an accessory later on, you don't want a danger of hitting a wire or cable when you screw or drill into the wall. if the cameras are 24V, they will not operate on 12V. it's too low of voltage. my guess is the cameras are 12 Volt but can handle up to 24 volts.
Hi Tory, don´t worry your cameras and screen must work from 9 to 36 Volts DC, that means you can connect directly to your 12 V system without problems, as well if it worked with your power station means that will work with your main 12V system.
Greetings from Mexico.😊🚐
I’m a dad and I hope this isn’t presumptuous or out of line, I just wanted to say that you are looking much healthier since you moved back to your parents’ place. Hope the van build continues to go well 😎
I was trying to figure out how to say the some thing! She really does look better. You really do have a brighter glow, Tory, now that you have some, security maybe. Whatever it is, you are doing the right thing, Keep it up!
Jeans heaven
Van build coming along
Love the drone shots 🏴🌈
You are so smart 😮
I was thinking the same thing about her appearance. Perhaps a combination of diet and emotional support.
@@Maria-t1e for a girl
I just went car camping for the first time and I'm so glad I watched all your videos about parking in a city and trusting your gut!
Tory I am always so impressed with your ability to take on a task you've never done before and plough through it like a dog with a bone. You just don't give up. I work in surveillance and watching you plan and execute this task, I feel like you could get work as an installer. Your common sense approach and long term install planning are pretty clever. Well done.
I have the same ones for my box truck. It works on 12v or 24v. Read the instructions if you have them or online. The watts it pulls is the watts it’s still going to use no matter what you plug it into. Add more solar or another battery if it’s that big of a deal or turn it off when it’s not needed.
It’s 12 to 24v, will be fine. I have a very similar system. UK full time van lifer, keep up the videos, inspiring! And your cute
Just like a typical DIY project everything goes wrong 🤪 😂 it turned out great 👍 I like how you can see all the camera angles at once 😎 give yourself a pat on the back for a job well done 👍
Great video! I've been searching for a surveillance camera system for a while now. I really like that this one lets you view four cameras simultaneously and in real-time. I was looking for cloud recording, dash cam features, parking mode, notifications for movement or intrusions, and built-in GPS. I decided to go with the BlackVue DR750X-3CH. It has only three cameras (front, back, and interior), but the ability to remotely view my van was one of my top priorities. I can pull up the camera feeds on a 14" tablet inside my van. I’ve wired the cameras to my coach batteries and have onboard WiFi, which are important prerequisites for remote, cloud-enabled surveillance cameras and dashcams.
I am absolutely impressed on your handyman skills and exhausted watching the labor and effort you displayed! Continue your work journey and informative videos
that hair flip was very nice.
Lol The slow mo hair flip! That's what van builds are all about lol Awesome!
Adding a comment to help the algorithm. I want to see the blink cameras installed. I'm thinking of going that route as well. Love your attitude.
Brilliant as always 💚 Oh?! You installed the panels 🎉 Cameras are definitely a great idea not only for safety but can be used for insurance and other information. Have a Favorite rest of week 💚🤟
I noticed the same thing. You look so much healthier and happier
I love what you are doing and you are learning on the go But thinking about the future and sealing holes etc. Great work. I am nearing the end of my life but having fun, so it is so refreshing to see you at your early stage of adventure
Wow, thats great you install ed the cameras!! Im so glad you did , because I was getting worried about you!!! Those cameras look like they are really high quality which is great!! Im so glad you will be alot safer with the cameras!!!
Bonjour Tory, l like this video very much, very impressive the way you did managed all those operations to fix the camera. It's a huge plus for all the owner of van to be confident to install them 🙏👌 👏👏Thank you 😊 Be safe and happy 🙏🌞😊
Morning from Hawaii that was a good installing your cameras on your camper van on this video
What a learning curve. A volt meter or multimeter might be needed to test the voltage / amps.
Great job , you are doing yourself so be kind to you. You able to help alot of us so as a single woman traveling thank you 🎉🎉
As an electrical engineer I have seen the input described as 24 VDC even though the specifications state a wide input range such as 9-36 VDC, on many devices. The fact that it comes with a cigarette lighter connector for power strongly suggests that it works on 12 VDC.
Thanks for the humor in the first few minutes of this video as it really kept me interested. it's difficult to watch a lot of these build shows because they are so boring. Trav ❤❤
"I dont have enough money to pay for therapy" Absolutely love this 🤣😂🤣
I've been watching your videos for a while - I think your videos are instructive and real-world But I think this is the first time I've seen a YT video where the sponsor is providing something which is demonstrably useful! F*ng A to you 💪🏻
Hey Tory,
Your power packs will be outputting 12v from the cigarette lighter so your cameras will run fine hardwired. I would trust what it says on the box over what Amazon says
Yep. If you read more of the Amazon description, it actually says they use anywhere from 9V to 36V. You bought the right ones; hardwire away.
@@SuperJoeycooper Amazing, thanks for the help! That explains why it kept changing V throughout the website, instructions, and box haha. I appreciate it! :)
There is a 12v to 24v step up you can try, just make sure you get the correct amperage. I enjoy your videos. I’ve done 3 vans.
I picked out the bluetooth version. I didn't have to put in any wires. I feel that it's better. ❤ There is also make the cameras that sit in the doorway in the perfect angle from the front to watch the front door side doors. And your back area.
But those are definitely with wires.
When I do purchase mine, I'll make a video of it.
When I have time this fall I'll also make a video of the Bluetooth version cameras. I own on the van.
I'm glad they made the Bluetooth version. I hate wires.
You're getting pretty good with this hardware installation stuff. 👍
I put an amazon link for a 24v to12v converter on another comment below. Great job Tory absolute tough job when you have to trace and run wires, such a tedious time consuming job, not only that but putting more holes on the van, your a trooper Tory. Your addition of footage capturing drone it's cute. Thanks for Sharing and keep up the great job...
Good work! If it turns out the cameras are 24v you can easily get this by putting two 12V batteries in series (the free way), or using a converting device (about $20 US). You can reduce the power draw by tweaking your settings (such as screen saver function of the display, recording only events vs 24/7, etc.). Most folks go 12v to have the largest possible number of choices available. Nothing wrong with this choice. Increasing the voltage is really only needed for folks who have large power needs. Renogy has a decent 12 v vs 24 v vs 48 v article I recommend you read if you have the time.
BTW the surval camera company would have a recommendation on the voltage converter. But Amazon has a ton of them. 12v to 24v Converter 5A 120W Step Up Converter. Just find out the amperage you need to handle.
I just bought my ram promaster today can’t wait to start this build
Tory... check your State in Maryland for instance u could get a repair citation for not having a 3rd stop light (highmount) stop light.... I was a MD state inspector for 20 years... Love U ! and you're video's
FYI, Silicone you can never paint so it tends to be a bad idea. You can smooth the finish of caulk by dipping your finger in paint thinner/mineral spirits and dab or run finger along to smooth. When caulk starts to stick again dip again.
Nice starting setup!
The cameras probably have a power converter inside with a wide input range. The leaflet inside the box should give the voltage range. They draw more current at night to power the LEDs. Check on the display at night if there is a difference between 12V and 24V.
You did a nice job on the rear camera, good for security. Be safe out there!
@Tory Delure if you want a clean finish with any kind of sealant, use painters tape around the perimeter of what you are sealing. Tape, lay down sealant, wipe up the extra sealant, and peel off the tape to reveal a nice clean edge. Cheers!
Might look into nutserts,threaded inserts. For mounting to sheetmetal
I’m envious. Wish I could build out a van and adventure!
Great addition to the build!
Some tips for silicone, apply some on the bolts/screws before screwing them in, this will help a lot with waterproofing.
Hey Tory, as far as the cameras go, (the 12v vs 24v thing) it won't hurt them, they just simply won't work. Anyway, good luck on the build and stay Safe! As always, BIG HUGS from Tennessee! ❤
Hey 👋 Tory I must say that you are quite an inspiration plus you are easy on the eyes 😃. Keep on making videos my lady 👍
Maybe add square or round washers (check Home Depot) to the mounting screws to give a more stable fit
If your worried about 12v, 12v is less than 24v, you can just *plug it in*, and see if it works, normally they do. if it doesn't work, nothing bad will happen. But if you where plugging a 12v device into 24v that would be bad, it is ok to plug something that needs more voltage into something that doesn't have enough. My LG monitor takes a 19v power adapter, I have it running on 12v without any problems, inside the monitor just converts anything >8v into 5v for it's actual use, but it makes it easier to just support anything from 8v to 26v and use a 19v adapter for everything instead of making things different. (The camera systems I see on amazon support 9v to 36v)
Gorgeous lady performing a beautiful hair flip 😍
Love your shows bonkers but beautiful love to see your van finished babe ❤❤❤
you can get a converter to take the 12v van power and jump it to 24v for the cameras if needed.
Those long coils of cable are probably chewing up some of your power.
The nuts that don't fit are probably a different threading. You can get some nuts at Lowe's to solve that problem before you get up to highway speeds in the van. If you think the threads on the bolts are damaged from the nuts, you can get a threading tool to fix the bolt threads.
BRAVO ! Great job.
ur man is bless to have u
Hi, Unless mistaken I'd say a suitably rated buck-converter should take care of your 12v to 24v issue. Loving the van build vlogs. Keep up the great content.
i think im in love lol and the drone is awesome
Interesting video. Well done for taking a tricky job on. Also, please wear suitable shoes to protect your toes while you are working and climbing a stepladder. I found this out the hard way.
@Tory Delury, I noticed that you used zip ties around the excess cable, and you might regret it later on as you'll need to cut them everytime. Try to using velcro ties for cable instead. Plus, if you need to move or extend the length, it will help. Also, make sure the cables can handle the amperage of voltage because the more power can melt the wires or the device. The cameras are a great idea for your security and for mental concerns. Good luck with the van build. A fan from Las Vegas,Nv
You put masking tape about 2 or3 mm around the camera mounts. Apply the black silicon seal, then peel off the masking tape. You should have a perfect even line of silicon seal. going around the camera mounts.
if you plugged into your cigarette lighter on power station that's 12 volts so they worked they may be dual voltage. but to run 24 v off of 12 v a buck converter works there's also converters to run 12 v off a 24 volt system . just need to size for the amp draw , so you said it drew 10amps so the converter needs to work on 128 watt i buy 150watt for margin
but i think your good to go . and if your system gets too stressed add a 12v battery just for cams following several promasters i recently found 2021 1500 136 low roof with 18000 miles i not doing a live in but dual use camping with mostly portable gear but will add solar
Happy to have found your channel and i subscribed. I’m trying to do some security stuff on a band van. Its a passenger van so its not as open inside but I’m figuring locks window film etc. just happy to watch the DIY stuff and motivated to get it done.!
lot of work. I think I'd have painted it all white to match van color, give maybe a bit more stealth factor, but maybe not so much. Of course later if wanted to match van color, could still spray them white. I would consider weather and road hit bugs would obscure the front camera more often than a dash mounted camera, and more stealth to dash mounted camera, less rain problem and no bug juice hitting it.
It can be a lot easier and neater looking (and less of a mess!) if you mask off the areas you want to seal with blue painter's tape before caulking. Then just caulk it the way you did, wipe off the excess like you did, and remove the tape. You end up with a perfectly straight caulk line, and you can throw a lot of the mess in the trash.
I have 5 blink wireless outdoor cameras, they last about a year on their funky special batteries.
For the camera’s. Just check with a multimeter what voltages they are running at now. If that’s 12, don’t put 24 volts in it, before you connect them I’d just check again just to be sure. If they need 24 volts, and you have 12, you can get a step-up-converter. I hope that makes sense lol.
Built really nicely. Oh, and camera system is cool too. I dont know why I was so compelled to jump out of my chair and dance
Amazing everything you/your hard work/information/your contribution thanks with lots of ❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤ again thanks for making this video ❤❤
So glad you find it helpful!! :)
Honestly security has always been a huge fear of mine I am definitely saving this for my build
As far as voltage, I see on your box the Monitor is good for 12-36V, so you are fine. Each camera gets power from the Monitor, from what I can see.
It can use 9-24v, so will run off 12V. It does use 10watts to use tho, but kind need them for the security cam functionality you're looking for vs Blink.
But a single 100AH battery could run it for 6 days. Assuming you're getting solar system + batteries it could pretty much run it forever.
You could have a low power WiFi running just for the Blink cams but they also need access to internet to connect with your phone.
You could colab with TH-cam people that make projects with raspberry pis to make custom security cameras to do exactly what you need and possibly use less power. I doubt it would get less than 2-3 watts of power usage though. So might not be worth the effort
Hi, you will need a 12 volt to 24 volt DC-DC converter. You will not do any damage if you plug them into your 12 volt system, but they wil not work properly. Dave
Regarding the 12v/24v possible snafu.. if it came with a cigarette lighter power adaptor and it is working like it is now, you should be good. Take a look at the power supply on the device, it will tell you what it operates at… and most if not all cigarette lighter plugs are 12v you have your voltage satisfied.
I would keep the camera cable and connector as close to the camera as possible, in case you need to replace any of the cameras. Hopefully you won’t have to, but if you do you maybe able to pull the camera out, disconnect it and replace with new camera.
Your Cameras Are Very Very Very Cool 😎 Tory.
That’s one of the best things to do 👍🏼👍🏼👍🏼
Did you really figure out all the wiring and do it by yourself? If so, you're talents truly go above and beyond 🙌🏼 I couldn't even install my dash cam system on my Promaster, ended up going to BestBuy and begged them to do it, lol. Thank you for the video and the cctv link👍🏼
Sweetie you're fine wiring them to your 12 volt system they work with anything from 9 volts to 36 volts the only difference is at higher voltages it pulls less amps and a lower voltages it pulls more. You will be fine plus you did a nice job. I am a van lifer who owns a house in Ecuador but works in Miami as a aviation aircraft maintenance inspector. I have a master of science degree in aeronautics plus I used to teach college kids how to fix airplanes so I think I know what I am doing. If you are worried about them putting too much energy just get more lithium iron phosphate batteries, they are dirt cheap right now. I have three 300 amp hour batteries totaling 900 amp hours hooked up to a 300 amp alternator on my T1N Sprinter. They cost about $450 each right now
There's an easy solution for the 12v. There are converters that would step down from 24v to 12v. Plenty on Amazon, but carefully choose high quality ones.
Hi Tory, thanks for the video, really helpful and informative. I have the same cameras with an 11 inch android 11 tablet. I was a bit miffed because it was supposed to be android 13 also the tablet was to be 2.8 8 core and when it arrived found it is 1.4 4 core processor, really slow. Unfortunetly you can not trust all the things that Chinese companies advertise online. I don't have it installed in the Campervan here, Motorhome there as yet but after watching your vid have a much better idea where to place the cameras and how to go about installing them. I had noticed it uses a lot of battery. So I will run mine from the leisure battery only that has a solar panel. I am also going to install interior 130 db sirens and strobe lights for security. But I am making the relay wiring myself, if the alarm is on and the doors are unlocked or opened the interior strobes and sirens go off. .. Anyhow thanks for sharing and keep up the great videos...Ray
good video! i lover anker brand electronics they outlast other brands and outperform
Good job I might do that with my car!
Hope nobody steals the cameras. Looks easy to remove them and take them home. Replace those easily removed allen head screws with anti-theft screws that require a special shaped head tool to tighten or remove.
This is the second video of yours that I've watched....you funny!! 😄
I would be very pleased that a hardwired system of such complexity is only pulling 10watts (.78amps). Sure that adds up to 19 amp/hours per day, and that is a lot, but the security of having them hardwired and not needing to recharge batteries is for sure the way to go. Plus, you probably will not have them on all the time.
Good informative video for video security installation. Thumbs up!
I am wondering whether this might be also used as an effective substitute for a rear-view mirror while driving. That would of course require mounting the display monitor screen somewhere on the dash panel so that it can easily and safely viewed while driving. 🤔
Yes! That is 100% possible with these!
My Starlink and my cameras use a fair amount of power. I’m actually thinking of going to a battery powered system and then just charging them up every so often.
There’s also a way to change your Starlink to 12 V and I thought about doing that also 🤔
Jeeez I'm coming to America 😍
If are 24 volt you can get a step up convertor for the system.
Are you building a submarine? The first thing that will give you errors are the power connection. Make that waterproof and solder the wires.
The nuts will probably come loose because there I no nylon ring in it. Or use Locktite to secure te nuts.
But hey, easy to say from a desk inThe Netherlands, you're building a campervan!!! Good work and keep learning!
I use a small UPS on my home security camera system and the main issue that I find with power usage is (heat) keeping the board of the computer system cool so I installed a small fan and the HD... I don't know if your system has a HD for self storage... Your screen would draw the most power maybe 10 (watts) so Using your phone to watch would be the best option. (The cameras even with IR lights on barely draw more than 1.5 watts.) If that is the case the device would be using wifi or bluetooth and those are pretty low wattage (bluetooth being the lesser). If wifi Check if there are settings to adjust your wifi DB broadcast range. If you have the max or average wattage rating off the box you can then do some quick math to find out how long it will last before you get close to damaging your battery''s if you're using acid or just need a recharge if you're using lithium. Battery system rated @ 680AH Then use the formula for converting Amps/Hours into Watts. W=AxV.. 680 x 12V = 8160 Watts.. Then you know how long you have! First time seeing you. Looks like you're having fun :)... Oh like the other guy said. if your camera system is running on your Jackery it's 12v. If you want to double check grab a multi-meter to check it yourself. Good tool to have btw.
Try the adjustable dc to dc step up boost converter to your 24v camera
Great video 😊
Good video!
Inverter will fix any voltage issue, however the package and information on the cameras is seen as the information you should follow in regards to what is contained within. If you try to draw 24 volts out of a 12 volt system i think it will just not work to be honest.