Somewhat uninformed question from a MC rookie here: if you get a ton of contamination inside the engine, what is the dynamic that causes engine failure? Love these videos!
Assuming you've got some kind of reasonable airfilter, if not oiled properly, the fine dust particles (silica etc) pass through and form a grinding paste with the petrol / oil. The engine literally polishes itself to death, incurring 2 or 300'000km of wear in 5-minutes.
Yikes! Thanks for commenting. I figured it was something along that line but don't have much engine or wrench-turning experience. Your experience and willingness to share your knowledge is a treasure for all of us-thanks again!
@@MotologyFilms Hey Adam, have you dropped the T7 on those barbusters yet ? I read they are damn strong for an open guard ? I used to run open acerbis ones on the lighter Mx/enduro bikes. There's a lot more weight on the bars when these bigger bikes go down and i wondered how these ones stack up against the traditional barbusters? Cheers - Adam 👍
There aren't 'that many' riders who really are the real deal when it comes to hard earned knowledge like this. Its way under 1/10 of a percent. ARieman1 fits right up there in this category. They literally all know each other personally or know who they are. Great channel, we are blessed to point out ears in his direction every once in a while. Hit the like button.
Thousands of videos telling me what not to do with the bike, and finally one I showing me how to loose the fear and do the stuff myself, and most importantly get to know the bike I am riding. Already redid my air filter which I left almost dry in the last maintenence. Thanks a lot men, keep it coming with this straight forward instructional videos.
Lived in WA for a decade. Dust is a huge problem for any device there. I worked in heavy machine manufacture and reconditioning. When a Caterpillar is requiring a full recon after 12 months you know it's a harsh environment. No doubt Adam being a mechanical fitter knows exactly what I'm talking about. This is gold! Just do it! If it can survive WA, it will survive anywhere... Good on ya Adam! Thanks for being so generous with your accumulated experience! Bloody legend!
These are the type of things I would never know until it was too late without your channel; I appreciate these insights. Thanks for passing this knowledge along.
Dude, these are the kind of tutorials I am looking for. Not just the standard run-of-the-mill factory recommendations but tips from years and years of personal experience that go beyond that.
Priceless information from someone who has been there and done that. A weekend warrior like me can make great use of your experience. Once again, dynamite content!
Keyboard warrior here: Great info on the CR air filter combining air filter oil and 2t oil so it doesn't dry out! Also great stuff with the silicone spray on plastics and rubber. I'm currently in the process of restoring a 1994 YZF 750R and have extensively sprayed all rubber hoses and vacuum lines with silicone spray and it's unreal how soft and compliant it made them after a couple of hours. Definitely going to use it moving forward. Great stuff as always! 🤙
Just keep the Silicon spray off the plastics (as in the cosmetic panels etc) , You will eventually ruin them and strip the coating leaving them looking very faded and dry. I learnt the hard way on two quad bikes thinking I was protecting the plastics only to realise it makes them look good temporarily until it drys again . Never again now just use muck off or similar. Years ago when I told a bike mechanic I used silicon he said that's fine but do it before you sell it and sell it quick, I always wondered what he meant until I eventually figured it out too late.
@@silverdale3207 That is absolutly trut but not many belive me. Silicone spray and ozon (the Sun) olders the plastic in a big and quick way. But like you and I find out....not many belive that. I know for shure, it cost my company a lot of money (mailfunctions on firehose connections) and we let it test by a technical univercity. Silicone on plastics under the influence from Ozon is a kliller, point.
I ve always been nuts by putting silicone on my bike and under the seat, feels good. About airfilters I do same amount of oiling and I will put some extra layers on it, usually some "medicine hats" or sometimes even Twin Air dust cover product. Those uber thin Medicine hats are great, they cost about few pennys each :D I will ziptie the exess fabric right on the center of the filter. Works really well on my KTM, all the flower seeds and and other nature particles will fall off and wont stick on filter. Cheers!
Some more tips for anyone passionate about their bikes: If you're washing bikes regularly, or simply want to do a better job, a cordless blower to get the water out of every nook is a fucking godsend - it's much easier to prevent corrosion, water spotting (on nice street bikes) when you start with less water to disperse with your EZlube/equivelent in places like under clutch lever boots, under your tanks, all those area you see Adam spray etc. Running the bike is great but unless you have pretty clean water you still leave behind a heap of minerals/water spotting - I go around with a cordless blower (I'm talking like an 18V makita/equivelant) while the bike is heating up so it's no extra time. Nothing against Adam's content there is extra nice ways of doing things too for those keen to be more anal in the detail, I still follow up with a water dispersant in places like clutch boots, pivots etc. and SC1 (like a silcone spray with less residue) but venturi/sucking water out with a blower (just like how Adam does his air filter) takes away a heap more water to start off with, especially if you're about to put your bike away for a week or two - nothing worse than putting them away wet. Has to be said not all air filter oils behave the same either, I've switched brands a heap to find one I'm happy with - some are shockers for drying out fast.
Just wanted to add: throw a rag over your brake rotors if you're spraying silicone, or wipe them off with brake cleaner before rotating the wheels. Silicone is very heat resistant and doesn't wash off easily; lubricants can soak into the pores of the brake pad material and they're not going to perform well ever again, and it probably won't burn out of the pads. Awesome video, great practical tips. Thank you
Glad to have what I got told as a young fella reinforced again, I’ve been telling me mates this for years and as they have blown up multiple bikes mine are still going strong. cheers for the great video Adam
He is literally talking the same what I learned from my father to maintain dirtbikes. When I read forums, go to the dealer's service everyone tells the opposite. First I thought something changed, and these new bikes need some new methods to maintain, but now I see: if you know what you are doing, you should do this. If you don't know, learn it from here. Nice video again! 😎👍
Great video. So glad you brought up the Keyboard warriors. It gets so exhausting at times listening to people that have no that have no idea what they are talking about. I actually used regular engine oil for years with no issues. Its ultimately about keeping the filter moist and clean after use.
That silicone spray tip is a game changer. Costs like 2 EUR a can and bike looks new a shiny after a wash and the protective coating is clearly visible. Tyvm!
Holy shit. Your tip to spray down all the plastics in silicon is amazing. Not only does it cause any dust and dirt to simply wash away in the excess, it restores the plastic and rubber, making the inside of your bike look shiny and new, it also protects against water. Outstanding. The stuff dries quickly, just leaves a protective barrier. What an absolutely incredible tip. I found even coating the external plastics was tremendous - spray onto the backs of mirrors, wipe off the excess, and dead bugs and dirt just rinse away with normal hose pressure after a ride.
Loved every video watched till now, I'm just absorbing all the free knowledge you're giving and its worth every minute of watching. No useless things, no nonsense, just clean videos all filled with knowledge. Amazing man just amazing!~!!👌👌👌
Thanks for schooling Adam, absorbing ALL your wisdom to service my first bike is Aprilia Tuareg 660! Products you are using in video is "MOTUL MC CARE P4" for water replacement/anti-rust and "MOTUL SHINE & GO SPRAY" silicone. Unable to find those in my region (Portland, Oregon, USA) yet. In the winter, I was riding the bike on ice with lots of salt and melt around town and into Canada, and it started corroding. Had to unmount the calipers and went all lengths to use copper lubricants etc to unstuck the brake cylinders, now working good with copper lube. Unfortunately the calipers (Brembo black 2-cil front and single-sil rear) actually look like discolored s%$t after all the salt and cleaning and brake cleaner. Likely clear coat is gone. I wish I knew about silicon spray sooner.
Fantastic Adam one of the things that many of us in the real world who have a regular job and have to save up or just make a big investment in our bikes is firstly warranties and all the shit that goes with that ,second the fear of making a mistake that cost us a lot of money in the end but thanks to your every man way of putting things from real world experience sure makes me a whole lot better at taking on a few larger projects and just making general maintenance a whole lot less intimidating thanks bud 🇨🇦
I agree with all your maintenance videos. I currently have over 52,000 miles of decent offroad use on my 2011 DRZ400. It runs better than new and looks better than new. Proper maintenance and your bike will last longer than you think it will.
Fantastic machine. I got the very first model released here in 2000. It was the non-rego model and I raced it in a few State Enduros before moving on to the KTM200EXC ...
That reminds me of a little story when I, about 15 years old, brought my 125 dirt bike to the workshop on my father's construction site so that the boys could check the bike. After a short time, the mechanic, a small Thai guy, came out, pulled my ear, held the totally dirty air filter under my nose and yelled at me if I was serious! Then he took me to the workshop and showed me how to clean the filter in the future! Lesson learned! There was no special filter oil back then. We used regular 2 stroke oil.
Great instructional vid mate. I recently did a 2000 klm dirt trails 5 day adventure ride on my 690R with same air filter the whole way as left my spare at home. Luckily I'd oiled it properly so looked like new on the inside however really dusty and dirty on the outside. Learnt my lesson years ago after not oiling a 250 smoker air filter properly and killed the engine..
Probably better to safe distance compressor air blast the air filter compartment before taking it out, instead of vacuuming it. T7 engine looks utterly amazing but the seat is sort of a narrow compared to the XT660ZA. Amazing advice for the sponge air filter, silicon spraying rubber and plastic is spot on.
On my last KX to my first KX back in 1986 I used Uni Filter air filter mixed with Mx-2. Still using Bel Ray and it drips to the swing arm and floor for my last KX450F. Loving the videos.
This channel is pure gold.. wish I'd known the silicone trick, the old(ish) klr just developed a short, right thru the fuel-cock, chafed wiring. Lucky to find & fix it, bet silicone would've helped! On my list (like your tire trick with it too).. 100% sensibility 🤙
Love this real world knowledge. And to think I questioned myself (wondering if I used too much oil) because oil drips everywhere after I oil an air filter - never again (question myself that is)!
Makes you appreciate who you're buying a second hand bike off of as well. Very intersting to see the filter be dunked into the oil like that, the amount of old hands telling me not to put too much oil on the filter during my first years of biking, unbelievable.
that 2 stroke oil mixed with air filter oil is genuinely a good idea, i hate doing filters so i like to minimize it as much as possible. something to try i reckon, cheers.
I have always been impressed with the way you drag your bikes around and lift them up onto makeshift workstands. But that shot @11:00. Man they're some great guns!
Guys and whatever you do, DO NOT USE WD40 on your shiny bike or the plastic parts. It will slowly damage the plastic and soon your bike turns from shiny into dead colour. I didnt belive it at first until i see it with my own eyes on an old Kawasaki. I am using Coconut oil to clean most parts after i give my bikes a proper wash and drying. Great Video as always - thx for sharing and cheers from Thailand
Alright, if I ever have a filter needing oiling in the future, then I've got that covered. Thanks for the clear 'How to'. Seems as though in the past I might not have used enough oil, like the way you do.
I really like the added step of a ring of chain lube around the air element contact and air box cover. I too coat our bikes in silicone spray as preventative maintenance. Only thing I’d say is don’t hard wring out the foam elements, softer squeezing and plenty of flushing. I saturate my foam elements with engine oil, squeeze out the excess then in addition I spray the outer layer with foam element oil. Very clean throttle bodies and the oil changes dropping fairly cleanish oil albeit I maybe over service them 👍 Great work mate, I learn something new with each new video.
Hey, thanks for sharing your vast knowledge. I'm decent with cars but quite new to bikes. The way you explain things is mind-blowing. Like, it's SO simple, despite how some of us build it up in our minds.
Best channel on TH-cam. I guess it would be the same process if you were running a pre-filter. Thanks a bunch. Keep the tutorials coming. Cheers from Sydney...
Bloody brilliant. Completely not by then book but perfection of maintenance Too many multi day adventure riders think they got to change these filters every afternoon when they stop for the night. Rarely ever required and normally does more damage than good. Keep up the realistic nontextbook , but practical videos 👍🏻
Quickly becoming the best moto you tuber on here. Youre right up with with Fort9 for me. Great instruction with logical reasoning behind all the maddness.
As a new bike owner, of an adventure bike no less, I really appreciate the tutorials. Especially as I'm getting the bike ready for an offroad class in the next month.
your the real deal mate i just love a no BS approach to getting it done from someone who knows their shit, love the content and i have learnt so much already from your videos that i am putting into practice with myself and the young fella. Cheers !
Hardly ever too much. I've ran oiled filters since late 1960's. No issues yet. Keep them wet and clean them some before removal. So easy to totally defeat having one with one spill of dirt into the intake. Yeah, I was old when I bought my T7, hang around awhile. Be safe.
Well you learn something every day, oil and filter oil mix I have never heard of but makes sense in harsh conditions or long periods between rides. I put my pre oiled spare filters in a zip lock bag so they don't dry out and are ready to go.
Thank you Adam. Your teaching your skill and knowledge to the world of motor bikes.Ive been a motorcycle mechanic at a suzuki shop in California in the States. This was back in the Mid 80,s. THis days im an older guy who still loves bikes. Thanks for everything you teach. learning a lot . Keep um coming. Your Fan hear at P.A.R.C ADV.
The best product for cleaning your bike is Wash & Wax from Motul. You can get anything off of your plastics, metal and rims. You don't need any other cleaner than that. Add a good silicon spray and you are set. The silicon spray can be used all over your bike even your engine. It's great for repelling water and rust (obviously you spray it on when your bike is bone dry). It's a great product for putting your bike in winter storage. The plastics on your bike will always look like new with silicon.
Adam again great content and love the delivery never too old to learn a few tricks Once upon a time all we used was engine oil to soak and air filter but like the 50/50 mix Thanks heaps Dave
👌 I've used Lucas Oil red and tacky grease, rubbed in. Chain saw bar oil. Key barrel is a must, especially if you're thinking of riding a week or more in any conditions.
Very informative stuff mate. I’ve been riding a long time in the bull dust just as a grandpa but never realised just how important this info is. I shall be adopting this from now on. Cheers mate!👍
Man. I love to watch your content. You are one of my few heroes. Just please be more concern for the environment. Don't drop the oil to the soil. Come on, man! You seems to love the nature. Let us do our part in promoting awareness and making sustainable choices. Remember that your are a role model for many of us. All the best for you!
Had a bike dusted after 6hrs. Waited 6mths for ktm to make valves. All due to dealer not doing proper OILING of filter at PDI. never trust a dealership to do it properly. Always check yours before a ride.
@ARiemann1 I've recently become a member of your channel. It's my first membership to any channel and I'm super proud to be part of this membership group. Thanks for all of the amazing content you create. I hope that more people support your work.
@@danielminchev6031 I've already ridden through your country during my Motonomad movie. We were trying to recover time and charge through in the same day, but there was no atm at the remote border crossing into Turkey (to pay visa or something) so we were forced back and found a town on a kind of inland sea or massive lake. We parked at a hotel and walked down to this amazing festival on the waters edge. There was food, families and some bizarre hard core Bulgarian rappers on the stage. Such a great experience, I didn't bring cameras and put it in the film because we just wanted to blend in and party with the Bulgarians. I loved that place and hope to return one day ... such beautiful people ❤️
@@MotologyFilmsMan, I'm 35, a father of two, you almost made me cry. If visit again I'll love to meet you in person. I'm a hobby mechanic in an enduro and a street racing team, I can definitely help in organizing the most beautiful and scenic enduro trails Bulgaria can offer :)
LOL my mate's laugh at me because my air filter oil helps lube my chain because I drown my filters until it drips out of my airbox. I haven't done the engine oil I'll try that next. Thanks heaps keep it up.
I've been using silicone spray on my bikes for 15 years such a great product for keeping bikes looking mint and when washing just a bit of truck wash and all dirt just falls off
Brilliant tips. The silicone spray on plastic and rubber is so good for cleaning and protection. Does the anti-rust stuff attract dirt and make it easier or harder to wash off? Have you had any experience on using silicone sprays on metal engine parts- good, bad, etc?
Before we got into racing engine oil was all we used to treat a filter, a coat of lithium grease or whatever we had to hand went on the seal. We also used to put a thin smear on the inside of the airbox in an effort to catch some crap before the filter and a pair of nans tights over the filter as a pre filter 😂
Just love this channel ... I miss the Australian attitude .. Spent a year down there '96 - 97 @ CSU ... good ol' Bathurst ... so freck'n refreshing ...Nononsense tips ... Keep'em coming
Your tutorials are the best! I get the air filter concept much better now. Glad hear someone else mention the benefits of spraying silicon oil and or WD or whatever all over your bike, cars, lawnmower, etc.. My wife likes to give me a hard time about how everytime we go to the market, Im grabbing fresh cans of silicon spray or spray lube of some sort... I live in upstate NY in the rust belt with salted roads every winter.. but if you look at all my cars and bikes and things, you wouldn't know it. By the way.. looking forward to those future warhorse vids I'm sure you have planned. I really love that bike and the story you created behind it..
Great info. I will try the 50/50 mix as I do notice the motul filter oil does seem to dry out. I use Vaseline around the filter lip before install. Grease, chainlube, Vaseline, who cares, whatever works!
If you have a pressure washer that outputs more than 120 Bar, I don't recommend holding something by hand and blasting the water directly onto your hand, even with a latex glove. My dad used a professional Karcher of +140 bar to clean a truck and by accident aimed the jet towards his hand for like 1 second and his skin was partly gone :)
Yeah thats it Adam you can never have to much oil make sure it is fully penetrated and I like your 50/50 mix , I can remember the day when all we had was engine oil but always used 4stroke oil I think it was castrol XL ... yeah that was a few years ago when I did my light engine apprenticeship 🤣
Brilliant video yet again, thanks. One quick question : Silicon spray on the fork legs or around the seals, is it a good idea or not? I've always done it but I know some people reckon it's not a great idea ... ? Oh and thank you for just confirming what i've been telling people for years; don't jet wash the crap out of your bearings or seals. Yes they are 'sealed' but if you have ever seen how little grease gets put into a bearing at the factory, jetwashing at close range and pushing what precious little is in there out the other side or pushing grit in there is just plain dumb. Like you said just go easy. Anyway, Cheers for another great video.
Ive been probably dodging the bullet with excessive filter cleaning cause i definitely dont put that much effert into cleaning or oiling. Rethinking how i approach my filter and instead of doing it alot half arsed i will give this way a crack. Cheers mate
I'm watching this full glory while I just started on the streets with a little offroad experience. Kinda wondering if all of this also applies to air filters if you're not doing that much offroad?
Excellent video, and your explanation is bulletproof. I follow similar steps myself for air filter cleaning. However I use hypoid gear oil for the chain and air filter, have ridden through dry dusty conditions for 30,000km and no issues thus far. Can you persuade me to use specific filter oil vs the universal alternative?
I put in a K&N filter in my 800gs and clean it every 5000km but would love a foam filter but no such thing to my knowledge in SA, is the steel with their oil not ideal?
You realise more airflow means more dirt. For a street bike why replace a paper element and increase engine wear with these ‘long lasting’ aftermarket filters?
Awesome content Adam. On the cleaning. Those battery powered pressure washers like the DeWalt only produce about 500-600 psi and can draw water from a bucket. I've literally blown the stickers right off the machine with conventional pressure washers.
Somewhat uninformed question from a MC rookie here: if you get a ton of contamination inside the engine, what is the dynamic that causes engine failure? Love these videos!
Assuming you've got some kind of reasonable airfilter, if not oiled properly, the fine dust particles (silica etc) pass through and form a grinding paste with the petrol / oil. The engine literally polishes itself to death, incurring 2 or 300'000km of wear in 5-minutes.
Yikes! Thanks for commenting. I figured it was something along that line but don't have much engine or wrench-turning experience. Your experience and willingness to share your knowledge is a treasure for all of us-thanks again!
@@Thompsfacekillah Dustin if you listen to this old guy, you just won't go wrong, simple as that.
@@MotologyFilms Hey Adam, have you dropped the T7 on those barbusters yet ? I read they are damn strong for an open guard ? I used to run open acerbis ones on the lighter Mx/enduro bikes. There's a lot more weight on the bars when these bigger bikes go down and i wondered how these ones stack up against the traditional barbusters? Cheers - Adam 👍
@@adamhrachowina9119 They are really strong, I have them on my WR450… Dropped it heaps , as I am a clumsy rider. Never broken or bent lever…
When an Aussie explains you something about dust and dirt, you better believe him. Thank you for this great channel Adam.
Mate, you're like the cool uncle teaching us to ride. Love your content!
He's a cool dude, indeed.
There aren't 'that many' riders who really are the real deal when it comes to hard earned knowledge like this. Its way under 1/10 of a percent. ARieman1 fits right up there in this category. They literally all know each other personally or know who they are. Great channel, we are blessed to point out ears in his direction every once in a while. Hit the like button.
Is he a mate of yours?😂😂😂
No, but he is freinds with many of Australia's best enduro / desert rider's.
He is the Enduro/rally bike GOAT, they literally fly him around the world to test bikes not to make em better but to get his approval
Thousands of videos telling me what not to do with the bike, and finally one I showing me how to loose the fear and do the stuff myself, and most importantly get to know the bike I am riding.
Already redid my air filter which I left almost dry in the last maintenence.
Thanks a lot men, keep it coming with this straight forward instructional videos.
Lose not loose.
LOL.. how'd the word natzi make it to this channel.. 😂
Hands down coolest off-road motorcycle channel on TH-cam! Thanks and please don’t stop! -MGM from Montana
Lived in WA for a decade. Dust is a huge problem for any device there. I worked in heavy machine manufacture and reconditioning.
When a Caterpillar is requiring a full recon after 12 months you know it's a harsh environment. No doubt Adam being a mechanical fitter knows exactly what I'm talking about.
This is gold! Just do it! If it can survive WA, it will survive anywhere...
Good on ya Adam!
Thanks for being so generous with your accumulated experience!
Bloody legend!
These are the type of things I would never know until it was too late without your channel; I appreciate these insights. Thanks for passing this knowledge along.
I'm imagining the my wife's expression at me using the dyson in my oily airbox next time I do my filter. Good tip... Priceless.
Dude, these are the kind of tutorials I am looking for. Not just the standard run-of-the-mill factory recommendations but tips from years and years of personal experience that go beyond that.
Priceless information from someone who has been there and done that. A weekend warrior like me can make great use of your experience. Once again, dynamite content!
Great vid. I’ve been riding for 30 years and still learn from your vids. Keep up the great content.
Keyboard warrior here: Great info on the CR air filter combining air filter oil and 2t oil so it doesn't dry out! Also great stuff with the silicone spray on plastics and rubber. I'm currently in the process of restoring a 1994 YZF 750R and have extensively sprayed all rubber hoses and vacuum lines with silicone spray and it's unreal how soft and compliant it made them after a couple of hours. Definitely going to use it moving forward. Great stuff as always! 🤙
Just keep the Silicon spray off the plastics (as in the cosmetic panels etc) , You will eventually ruin them and strip the coating leaving them looking very faded and dry. I learnt the hard way on two quad bikes thinking I was protecting the plastics only to realise it makes them look good temporarily until it drys again . Never again now just use muck off or similar. Years ago when I told a bike mechanic I used silicon he said that's fine but do it before you sell it and sell it quick, I always wondered what he meant until I eventually figured it out too late.
@@silverdale3207 yup! Definitely keeping that in mind considering the fairings are almost in mint condition and oozing pure 90s eurodance nostalgia. 😅
@@silverdale3207 That is absolutly trut but not many belive me. Silicone spray and ozon (the Sun) olders the plastic in a big and quick way. But like you and I find out....not many belive that. I know for shure, it cost my company a lot of money (mailfunctions on firehose connections) and we let it test by a technical univercity. Silicone on plastics under the influence from Ozon is a kliller, point.
I ve always been nuts by putting silicone on my bike and under the seat, feels good. About airfilters I do same amount of oiling and I will put some extra layers on it, usually some "medicine hats" or sometimes even Twin Air dust cover product. Those uber thin Medicine hats are great, they cost about few pennys each :D I will ziptie the exess fabric right on the center of the filter. Works really well on my KTM, all the flower seeds and and other nature particles will fall off and wont stick on filter. Cheers!
Some more tips for anyone passionate about their bikes: If you're washing bikes regularly, or simply want to do a better job, a cordless blower to get the water out of every nook is a fucking godsend - it's much easier to prevent corrosion, water spotting (on nice street bikes) when you start with less water to disperse with your EZlube/equivelent in places like under clutch lever boots, under your tanks, all those area you see Adam spray etc. Running the bike is great but unless you have pretty clean water you still leave behind a heap of minerals/water spotting - I go around with a cordless blower (I'm talking like an 18V makita/equivelant) while the bike is heating up so it's no extra time. Nothing against Adam's content there is extra nice ways of doing things too for those keen to be more anal in the detail, I still follow up with a water dispersant in places like clutch boots, pivots etc. and SC1 (like a silcone spray with less residue) but venturi/sucking water out with a blower (just like how Adam does his air filter) takes away a heap more water to start off with, especially if you're about to put your bike away for a week or two - nothing worse than putting them away wet. Has to be said not all air filter oils behave the same either, I've switched brands a heap to find one I'm happy with - some are shockers for drying out fast.
Buy a pet dryer with heating. The best way to dry your bike.
I do the same thing on my bike and also on my car. Around door handle ,trim, badges etc.
One of the best motorcycle channels out there! Love it, thank you.
Just wanted to add: throw a rag over your brake rotors if you're spraying silicone, or wipe them off with brake cleaner before rotating the wheels. Silicone is very heat resistant and doesn't wash off easily; lubricants can soak into the pores of the brake pad material and they're not going to perform well ever again, and it probably won't burn out of the pads.
Awesome video, great practical tips. Thank you
One of the few guys I will take Moto mechanical advice from. Great video, Adam 🤙.
Glad to have what I got told as a young fella reinforced again, I’ve been telling me mates this for years and as they have blown up multiple bikes mine are still going strong. cheers for the great video Adam
He is literally talking the same what I learned from my father to maintain dirtbikes. When I read forums, go to the dealer's service everyone tells the opposite. First I thought something changed, and these new bikes need some new methods to maintain, but now I see: if you know what you are doing, you should do this. If you don't know, learn it from here. Nice video again! 😎👍
If I had seen this video 5 years ago, it may have saved an entire top end rebuild on my 1090! And yeah, $4000 later!!! Thanks again Adam!
Great video. So glad you brought up the Keyboard warriors. It gets so exhausting at times listening to people that have no that have no idea what they are talking about. I actually used regular engine oil for years with no issues. Its ultimately about keeping the filter moist and clean after use.
That silicone spray tip is a game changer. Costs like 2 EUR a can and bike looks new a shiny after a wash and the protective coating is clearly visible. Tyvm!
Holy shit. Your tip to spray down all the plastics in silicon is amazing. Not only does it cause any dust and dirt to simply wash away in the excess, it restores the plastic and rubber, making the inside of your bike look shiny and new, it also protects against water. Outstanding. The stuff dries quickly, just leaves a protective barrier.
What an absolutely incredible tip.
I found even coating the external plastics was tremendous - spray onto the backs of mirrors, wipe off the excess, and dead bugs and dirt just rinse away with normal hose pressure after a ride.
Loved every video watched till now, I'm just absorbing all the free knowledge you're giving and its worth every minute of watching. No useless things, no nonsense, just clean videos all filled with knowledge. Amazing man just amazing!~!!👌👌👌
Thanks for letting me know, old as I am, still there are still new things to learn. Cheers
TOOK THE 2016 KTM 500EXC 6 DAYS OUT TODAY ,MUD IS FALLING OFF THE FENDER ,ALL OVER THE GARAGE ,THIS BIKE GETS THE JUICES FLOWING . LOVE FROMM CANADA .
Thanks for schooling Adam, absorbing ALL your wisdom to service my first bike is Aprilia Tuareg 660! Products you are using in video is "MOTUL MC CARE P4" for water replacement/anti-rust and "MOTUL SHINE & GO SPRAY" silicone. Unable to find those in my region (Portland, Oregon, USA) yet. In the winter, I was riding the bike on ice with lots of salt and melt around town and into Canada, and it started corroding. Had to unmount the calipers and went all lengths to use copper lubricants etc to unstuck the brake cylinders, now working good with copper lube. Unfortunately the calipers (Brembo black 2-cil front and single-sil rear) actually look like discolored s%$t after all the salt and cleaning and brake cleaner. Likely clear coat is gone. I wish I knew about silicon spray sooner.
Me watching this, but being more amazed by the screw driver in the peg holder trick! Great video as always!
Cheers, old school maintenance. I was told to always keep the bike "wet", oil everything! No issues in decades.
Always remember that you make videos for the fans, not the critics. They don't exist. Thanks!
Fantastic Adam one of the things that many of us in the real world who have a regular job and have to save up or just make a big investment in our bikes is firstly warranties and all the shit that goes with that ,second the fear of making a mistake that cost us a lot of money in the end but thanks to your every man way of putting things from real world experience sure makes me a whole lot better at taking on a few larger projects and just making general maintenance a whole lot less intimidating thanks bud 🇨🇦
I agree with all your maintenance videos. I currently have over 52,000 miles of decent offroad use on my 2011 DRZ400. It runs better than new and looks better than new. Proper maintenance and your bike will last longer than you think it will.
Fantastic machine. I got the very first model released here in 2000. It was the non-rego model and I raced it in a few State Enduros before moving on to the KTM200EXC ...
That reminds me of a little story when I, about 15 years old, brought my 125 dirt bike to the workshop on my father's construction site so that the boys could check the bike. After a short time, the mechanic, a small Thai guy, came out, pulled my ear, held the totally dirty air filter under my nose and yelled at me if I was serious! Then he took me to the workshop and showed me how to clean the filter in the future! Lesson learned! There was no special filter oil back then. We used regular 2 stroke oil.
Great story 👏
@@MotologyFilms Lots of chainsaw bar oil has been used too!
Good tip with the chain lube. I have plenty of cans because I’ve stopped using on chains years ago, now I have a use for them.
The whole bike series has been great! Thanks for making these videos Adam. Your presentation style is no nonsense and much appreciated!
Great instructional vid mate. I recently did a 2000 klm dirt trails 5 day adventure ride on my 690R with same air filter the whole way as left my spare at home. Luckily I'd oiled it properly so looked like new on the inside however really dusty and dirty on the outside. Learnt my lesson years ago after not oiling a 250 smoker air filter properly and killed the engine..
Probably better to safe distance compressor air blast the air filter compartment before taking it out, instead of vacuuming it. T7 engine looks utterly amazing but the seat is sort of a narrow compared to the XT660ZA. Amazing advice for the sponge air filter, silicon spraying rubber and plastic is spot on.
On my last KX to my first KX back in 1986 I used Uni Filter air filter mixed with Mx-2. Still using Bel Ray and it drips to the swing arm and floor for my last KX450F. Loving the videos.
This channel is pure gold.. wish I'd known the silicone trick, the old(ish) klr just developed a short, right thru the fuel-cock, chafed wiring. Lucky to find & fix it, bet silicone would've helped! On my list (like your tire trick with it too).. 100% sensibility 🤙
Love this real world knowledge. And to think I questioned myself (wondering if I used too much oil) because oil drips everywhere after I oil an air filter - never again (question myself that is)!
Makes you appreciate who you're buying a second hand bike off of as well. Very intersting to see the filter be dunked into the oil like that, the amount of old hands telling me not to put too much oil on the filter during my first years of biking, unbelievable.
that 2 stroke oil mixed with air filter oil is genuinely a good idea, i hate doing filters so i like to minimize it as much as possible. something to try i reckon, cheers.
I have always been impressed with the way you drag your bikes around and lift them up onto makeshift workstands. But that shot @11:00. Man they're some great guns!
As always, great stuff. Great to see how experienced professional does things :)
Man I love this channel, keep sending the good stuff Adam, Stay strong Bro
The gloves for filter work are the mark of a vet. Thx for the silicon tip, mineral oil works great on rubber but doesn't come in spray form. Cheers.
Guys and whatever you do, DO NOT USE WD40 on your shiny bike or the plastic parts. It will slowly damage the plastic and soon your bike turns from shiny into dead colour. I didnt belive it at first until i see it with my own eyes on an old Kawasaki. I am using Coconut oil to clean most parts after i give my bikes a proper wash and drying. Great Video as always - thx for sharing and cheers from Thailand
Alright, if I ever have a filter needing oiling in the future, then I've got that covered. Thanks for the clear 'How to'. Seems as though in the past I might not have used enough oil, like the way you do.
I really like the added step of a ring of chain lube around the air element contact and air box cover. I too coat our bikes in silicone spray as preventative maintenance.
Only thing I’d say is don’t hard wring out the foam elements, softer squeezing and plenty of flushing. I saturate my foam elements with engine oil, squeeze out the excess then in addition I spray the outer layer with foam element oil. Very clean throttle bodies and the oil changes dropping fairly cleanish oil albeit I maybe over service them 👍
Great work mate, I learn something new with each new video.
Hey, thanks for sharing your vast knowledge. I'm decent with cars but quite new to bikes. The way you explain things is mind-blowing. Like, it's SO simple, despite how some of us build it up in our minds.
Best channel on TH-cam.
I guess it would be the same process if you were running a pre-filter.
Thanks a bunch.
Keep the tutorials coming.
Cheers from Sydney...
noted, and I will do air filters this way from now on.
Bloody brilliant.
Completely not by then book but perfection of maintenance
Too many multi day adventure riders think they got to change these filters every afternoon when they stop for the night.
Rarely ever required and normally does more damage than good.
Keep up the realistic nontextbook , but practical videos 👍🏻
Quickly becoming the best moto you tuber on here. Youre right up with with Fort9 for me.
Great instruction with logical reasoning behind all the maddness.
Adam, you outdone yourself again mate, re-learnt to do the engine oil change and now...back to class on the air filter :)
An old salad spinner works well for drying filters. Good tips cheers!👌🏼
As a new bike owner, of an adventure bike no less, I really appreciate the tutorials. Especially as I'm getting the bike ready for an offroad class in the next month.
your the real deal mate i just love a no BS approach to getting it done from someone who knows their shit, love the content and i have learnt so much already from your videos that i am putting into practice with myself and the young fella. Cheers !
Hardly ever too much. I've ran oiled filters since late 1960's. No issues yet. Keep them wet and clean them some before removal. So easy to totally defeat having one with one spill of dirt into the intake. Yeah, I was old when I bought my T7, hang around awhile. Be safe.
Well you learn something every day, oil and filter oil mix I have never heard of but makes sense in harsh conditions or long periods between rides. I put my pre oiled spare filters in a zip lock bag so they don't dry out and are ready to go.
Thank you Adam. Your teaching your skill and knowledge to the world of motor bikes.Ive been a motorcycle mechanic at a suzuki shop in California in the States. This was back in the Mid 80,s. THis days im an older guy who still loves bikes. Thanks for everything you teach. learning a lot . Keep um coming. Your Fan hear at P.A.R.C ADV.
The best product for cleaning your bike is Wash & Wax from Motul. You can get anything off of your plastics, metal and rims. You don't need any other cleaner than that. Add a good silicon spray and you are set. The silicon spray can be used all over your bike even your engine. It's great for repelling water and rust (obviously you spray it on when your bike is bone dry). It's a great product for putting your bike in winter storage. The plastics on your bike will always look like new with silicon.
Looks like i am slightly under oiled but well distributed, no spots, thanks for the talk. Cheers from Oregon USA
Adam again great content and love the delivery never too old to learn a few tricks
Once upon a time all we used was engine oil to soak and air filter but like the 50/50 mix
Thanks heaps
Dave
I am definitely going to use that screwdriver through the footpeg trick next time i work on my bike, awesome idea
👌
I've used Lucas Oil red and tacky grease, rubbed in. Chain saw bar oil.
Key barrel is a must, especially if you're thinking of riding a week or more in any conditions.
Very informative stuff mate. I’ve been riding a long time in the bull dust just as a grandpa but never realised just how important this info is. I shall be adopting this from now on. Cheers mate!👍
Adam, love your channel, your expertise, and mostly you style and attitude! Thanks for all the great information!!
Man. I love to watch your content. You are one of my few heroes. Just please be more concern for the environment. Don't drop the oil to the soil. Come on, man! You seems to love the nature. Let us do our part in promoting awareness and making sustainable choices. Remember that your are a role model for many of us. All the best for you!
Had a bike dusted after 6hrs.
Waited 6mths for ktm to make valves.
All due to dealer not doing proper OILING of filter at PDI.
never trust a dealership to do it properly.
Always check yours before a ride.
@ARiemann1 I've recently become a member of your channel. It's my first membership to any channel and I'm super proud to be part of this membership group. Thanks for all of the amazing content you create. I hope that more people support your work.
Hey Daniel, thanks so much mate. Which country are you from?
@@MotologyFilms Hey, I',m from Bulgaria. It will not surprise me if you never heard of it. It's a small country in Europe, neighboring Greece.
@@danielminchev6031 I've already ridden through your country during my Motonomad movie. We were trying to recover time and charge through in the same day, but there was no atm at the remote border crossing into Turkey (to pay visa or something) so we were forced back and found a town on a kind of inland sea or massive lake. We parked at a hotel and walked down to this amazing festival on the waters edge. There was food, families and some bizarre hard core Bulgarian rappers on the stage. Such a great experience, I didn't bring cameras and put it in the film because we just wanted to blend in and party with the Bulgarians. I loved that place and hope to return one day ... such beautiful people ❤️
@@MotologyFilmsMan, I'm 35, a father of two, you almost made me cry. If visit again I'll love to meet you in person. I'm a hobby mechanic in an enduro and a street racing team, I can definitely help in organizing the most beautiful and scenic enduro trails Bulgaria can offer :)
@@danielminchev6031 This will happen.
Yesss I use a mix of 2stroke and my friends hate it but I trust it
Once again, thanks for the maintenance tips! This one is gold.
LOL my mate's laugh at me because my air filter oil helps lube my chain because I drown my filters until it drips out of my airbox. I haven't done the engine oil I'll try that next. Thanks heaps keep it up.
Well done . Mixing the oil is a good trick .
No wonder that bike literally dances to his tunes as he seems to take care of it (her?) so passionately so well! Well done
I've been using silicone spray on my bikes for 15 years such a great product for keeping bikes looking mint and when washing just a bit of truck wash and all dirt just falls off
Brilliant tips. The silicone spray on plastic and rubber is so good for cleaning and protection. Does the anti-rust stuff attract dirt and make it easier or harder to wash off? Have you had any experience on using silicone sprays on metal engine parts- good, bad, etc?
I wish Adam could narrate my life. These vids are the best.
Before we got into racing engine oil was all we used to treat a filter, a coat of lithium grease or whatever we had to hand went on the seal. We also used to put a thin smear on the inside of the airbox in an effort to catch some crap before the filter and a pair of nans tights over the filter as a pre filter 😂
Just love this channel ... I miss the Australian attitude .. Spent a year down there '96 - 97 @ CSU ... good ol' Bathurst ... so freck'n refreshing ...Nononsense tips ... Keep'em coming
“You’re engine’s toast. It’s all over. You have failed”
He’s got a no bullshit way of making a point hasn’t he 👌
Your tutorials are the best! I get the air filter concept much better now.
Glad hear someone else mention the benefits of spraying silicon oil and or WD or whatever all over your bike, cars, lawnmower, etc.. My wife likes to give me a hard time about how everytime we go to the market, Im grabbing fresh cans of silicon spray or spray lube of some sort... I live in upstate NY in the rust belt with salted roads every winter.. but if you look at all my cars and bikes and things, you wouldn't know it.
By the way.. looking forward to those future warhorse vids I'm sure you have planned. I really love that bike and the story you created behind it..
Crap! I now have several more hours of work to do! I’ve got a big ride next month and better get the prep started. Thanks again for the great tips!
Great info. I will try the 50/50 mix as I do notice the motul filter oil does seem to dry out. I use Vaseline around the filter lip before install. Grease, chainlube, Vaseline, who cares, whatever works!
Another great video! Thank you for sharing your years worth of knowledge!
Great video and advice! Always something to learn here. Thank you. The trick with the 50:50 mixture for the oil filter is gold.
If you have a pressure washer that outputs more than 120 Bar, I don't recommend holding something by hand and blasting the water directly onto your hand, even with a latex glove. My dad used a professional Karcher of +140 bar to clean a truck and by accident aimed the jet towards his hand for like 1 second and his skin was partly gone :)
This knowledge is so valuable. It is simple, but so important. Thank you for sharing it.
Proper video. No nonsense direct information. Thanks for this. 😊
Yeah thats it Adam you can never have to much oil make sure it is fully penetrated and I like your 50/50 mix , I can remember the day when all we had was engine oil but always used 4stroke oil I think it was castrol XL ... yeah that was a few years ago when I did my light engine apprenticeship 🤣
Hi. Great video, thanks.
What kind of fluid you use for washing air filter in the beginning? Could I use just normal gasoline for that?
Brilliant video yet again, thanks. One quick question : Silicon spray on the fork legs or around the seals, is it a good idea or not? I've always done it but I know some people reckon it's not a great idea ... ? Oh and thank you for just confirming what i've been telling people for years; don't jet wash the crap out of your bearings or seals. Yes they are 'sealed' but if you have ever seen how little grease gets put into a bearing at the factory, jetwashing at close range and pushing what precious little is in there out the other side or pushing grit in there is just plain dumb. Like you said just go easy. Anyway, Cheers for another great video.
Ive been probably dodging the bullet with excessive filter cleaning cause i definitely dont put that much effert into cleaning or oiling. Rethinking how i approach my filter and instead of doing it alot half arsed i will give this way a crack. Cheers mate
I'm watching this full glory while I just started on the streets with a little offroad experience. Kinda wondering if all of this also applies to air filters if you're not doing that much offroad?
Excellent video, and your explanation is bulletproof. I follow similar steps myself for air filter cleaning. However I use hypoid gear oil for the chain and air filter, have ridden through dry dusty conditions for 30,000km and no issues thus far. Can you persuade me to use specific filter oil vs the universal alternative?
You just blew my mind with that 2T oil lifehack
off topic: what are your thoughts on replacing paper filter in street bikes with long lasting aftermarket oil coated filters? Worth it or even bad?
Exactly my question for all roads/no roads bikes, replacements for my paper filter seem to be oiled cotton gauze fabric, not foam.
I put in a K&N filter in my 800gs and clean it every 5000km but would love a foam filter but no such thing to my knowledge in SA, is the steel with their oil not ideal?
You realise more airflow means more dirt. For a street bike why replace a paper element and increase engine wear with these ‘long lasting’ aftermarket filters?
Awesome content Adam. On the cleaning. Those battery powered pressure washers like the DeWalt only produce about 500-600 psi and can draw water from a bucket. I've literally blown the stickers right off the machine with conventional pressure washers.