Allen Bradley ControlLogix Redundancy System 1756 Part 2/5 - Firmware Flash with Control Flash

If this video is helpful, please like, share and subscribe to my channel!
Thank you.
ControlLogix Redundancy System:
2 PLC/CPU Racks:
1756-L72 or 1756-L72K;
(Same hardware, “K” is for additional conformal coating)
1756-EN2T or 1756-EN2TK;
1756-RM2 or 1756-RM2K;
1 IO Rack:
1756-EN2T or 1756-EN2TK;
1756-IF16 or 1756-IF16K.
Software:
Studio5000 Logic Designer;
Control Flash;
Rslinx Classic.
Allen Bradley ControlLogix Redundancy System 1756 Part 1/5 - Hardware Set Up
• Allen Bradley ControlL...
Allen Bradley ControlLogix Redundancy System 1756 Part 2/5 - Firmware Flash with Control Flash
• Allen Bradley ControlL...
Allen Bradley ControlLogix Redundancy System 1756 Part 3/5 - Config. on redundancy module 1756-RM2
• Allen Bradley ControlL...
Allen Bradley ControlLogix Redundancy System 1756 Part 4/5 - Programming Studio5000 Logic Designer
• Allen Bradley ControlL...
Allen Bradley ControlLogix Redundancy System 1756 Part 5/5 - Program Download and Sync
• Allen Bradley ControlL...

[@charliebravo485]

Informative presentation. Thanks for making it look so easy to do. I admire your skill and confidence.

[@SYPHOANG]

@Charlie Bravo: Thank you for your kind words and your support to my channel. Knowledge can only grow exponentially when it is shared.

[@ing.-juanmanuelcardenasrod4567]

This L5572s processor already uses the studio 5000 software

[@suriyat8773]

AB thank you

[@SYPHOANG]

@surivat8773: Thank you for your support to my channel.

[@shijunma3340]

Noticed you had A RAFirmware folder, but when I downloaded, only V33.052_kit1_ENHCLXRED was downloaded. Why?

[@SYPHOANG]

@Shijun Ma: You need to extract that ENHCLXRED into some folders to get the DMKS.EXE file and then unzip it to get all different .dmk files @3:11. Thank you for subscribing to my channel.

[@ing.-juanmanuelcardenasrod4567]

!Hello good Morning!
I have an L5572s processor, I can use it as a normal processor since I do not have your partner or security partner, or I use forcefully your security partner, I hope and you can answer me

[@SYPHOANG]

@Ing.-juan manuel cardenas rodriguez: Yes, you can. Please see the video below. Thank you for subscribing to my channel.
th-cam.com/video/lLhxuwYa25E/w-d-xo.html

[@ing.-juanmanuelcardenasrod4567]

I have an HMI with firmware 4.0 and I would like to upload it to 5.10 which is the one that accepts but I could not make a video on this subject. I would appreciate it.

[@SYPHOANG]

@Ing.-juan manuel cardenas rodriguez: Please see the video below for how to upgrade Allen Bradley HMI firmware.
th-cam.com/video/3iAgL_yj8WQ/w-d-xo.html

[@arduinosantacruzbolivia4601]

Tu video no tiene activado los subtítulos podrías activarlos gracias de esa manera entiendo mas al traducirlos

[@SYPHOANG]

@ARDUINO SANTA CRUZ BOLIVIA: Thank you for your comments. I just turned it on but TH-cam will take a while to add the subtitles to the video. Please let me know if it works for you and if you have any questions.

[@igoru3063]

1. Why are you installing older firmware?
2. I’m asking because I can’t make a reservation.
ControlLogix 5580 1756-L82E with 35 firmware using ENTR and RM2 modules. Do I need to update them to the latest version or roll them back??

[@SYPHOANG]

@igoru3063: Thank you for your support to my channel.
1/ The firmware I used might be old now but it was not old more than 2 years ago when I filmed it.
2/ Have you watched all 5 videos in this series? You should download the whole firmware package for all modules for redundancy. The firmware package in this video might be too old and discontinued on Rockwell website by now. You should go by any package that's available now. Good luck.