วีดีโอ

@mohamedelnikeb6982: I am not sure why your HMI configuration screen does not have the EXIT button. Not all Allen Bradley HMI's are the same. The firmware 5.10.00.09 you have on your HMI is likely for very old Allen Bradley HMI's. I believe this VNC viewer feature is only for those not too old. If you have the exact same HMI I showed in the video, you should be able to upgrade it to firmware v10. Please see the below video for the instructions to do it. Hopefully it will solve the problem for you. Good luck! th-cam.com/video/3iAgL_yj8WQ/w-d-xo.html

@pankajparihar8593: You might want to check the "length" set up on your Modscan32. It cannot be greater than the amount of Modbus registers coming from your PLC. Good luck.

@edvinasjablonskis2054: I am working for Allen Bradley. You should contact your local Allen Bradley authorized distributor to get it. Thank you.

@@SYPHOANG I contacted them, but they could not provide me this version of the software as its obsolete. I need it for the panelview 1000 hmi backup. Is there any way you could help me obtain this software?

@edvinasjablonskis2054: I am not sure where you are but I am in the U.S. and was able to get the. software from Allen Bradley website. I don't think the software version really matters. You can try to get the version that still available. Hopefully it will work out for you.

@punishedgoy9131: Below is the selection guide from Allen Bradley for Micro800 PLC family you might want to check out. The catalog number details are on page 4. Per Allen Bradley, "Q" is for 24 V AC/DC Input type. The first "B" is for 24V DC Source output type. The second "B" is for 24V DC Power supply. If you find this video and the below information helpful, a "super thanks" at the lower right corner is a great way to show your support to what I've been doing on my channel to help everyone. Thank you. literature.rockwellautomation.com/idc/groups/literature/documents/sg/2080-sg001_-en-p.pdf

@user-fb9rd2dl4l: I don't quite understand your question. Maybe the google translate doesn't do a good job. Would you please leave your comments or questions in English? Thank you.

@congnguyenuc1614: Cảm ơn bình luận của bạn. Đầu tiên, không phải tất cả HMI Allen Bradley đều giống nhau. Chỉ những chiếc Panelview Plus 7 sau này mới có nút vuông màu trắng ở góc dưới bên trái để chuyển đến màn hình cấu hình HMI. Đối với các HMI Allen Bradley cũ hơn như Panelview Plus 700, bàn phím USB là lựa chọn duy nhất để bạn thực hiện điều đó. Đây là từ nhà sản xuất. Nó không được thiết lập bởi bất cứ ai. Bạn có thể muốn xem video dưới đây. "super thanks" ở góc dưới bên phải là cách tuyệt vời để thể hiện sự ủng hộ của bạn đối với kênh của tôi cũng như trải nghiệm mà tôi đã chia sẻ trên các video của mình. Cảm ơn. th-cam.com/video/UkpAesSynQw/w-d-xo.htmlsi=um3462MEsAT8E1hZ

@ansonkiek6471: Unfortunately I never tried it before.

@Shubham_848Vlog: Glad it helped. Thank you for subscribing to my channel.

@corderodedios776: Glad it helped. Thank you for subscribing to my channel.

@erasmosanchezespinosa2739: Glad it helped. Thank you for subscribing to my channel.

@nukeelda: I am not sure what you meant for "the physical connection"?

@@SYPHOANG Rec. Video or picture of ethernet cable going to PC and PLC I know it is Ethernet because of configured drive for ethernet cable or RJ45.

@nukeelda: Yes, it is just an ethernet cable plugged into RJ45 ports on your PC and the PLC. Thank you for your comments.

@multika_fpv2269: Really? I thought it should be able to. If I have the controller 1100, I will test it out for you.

@@SYPHOANG In the io configuration On channel 0 or 1 There is no modbus TCP selection option

@multika_fpv2269: So I guess there is nothing we can do about it. In fact, this was long obsolete.

@aaron-yg/gy: I don't think it is possible.

@pedroborges2672: Data Logging might be what you need. th-cam.com/video/g63NWaOARik/w-d-xo.html

@mecatronicaindustrial2264: Thank you for subscribing to my channel.

@StrikeCommand13: For the new PC, you only need to change its ethernet adapter to make it on the same network with the controller. However, if you do not know the controller IP address, it might be a problem. My recommendation is "DO NOT change the controller IP". There is a device that can help you find the IP address of the controller. Below is the video I found should be very helpful for what you need. Once again, keep in mind that you should never change the controller IP address. Please let me know if you have any questions. Good luck. th-cam.com/video/DlkEVzm_y80/w-d-xo.htmlsi=B98mJdprOrk77b5A

@meagain6837: It was just a free music from the video editor.

@PMMP-te8vo: I think it might be Micro850 PLC's.

@wwfireboyww: Both PLC and HMI have their own clock. You can only set the date and time to both at the same time but the clock on the HMI cannot overwrite the clock running on the PLC or the other way around.

@abrarahmednabil1283: Thank you for subscribing to my channel.

@ranjithharidas963: It depends on the communication protocol between the PLC and the 2 HMI's. If it is set up for Ethernet IP, it should not be a problem.

@@SYPHOANG I am using Ethernet IP for communication, Thanks for the reply.

@clandservicos: I am not sure what link are you trying to access?

@@SYPHOANG I'm trying to stop the link, which has a demonstration of the spreadsheet and the pdf file with explanation. I have an application ready that already works. I just need to save the alarm data in .csv on the pendrive connected directly to the HMI.

@clandservicos: If you are trying to get the whole alarm history in a .csv spreadsheet from the HMI, the below video might be what you need to check out. It's called "Audit Trail". If you like the content of my channel and enjoy learning from my video, a "super thanks" at the lower right corner should be a great way to show your support to what I have been doing. Please let me know if you have questions. th-cam.com/video/qYatbwnTDzE/w-d-xo.htmlsi=NXJr0_sIG5p88yh6

@leebeavers6912: Glad it was helpful!

@josephksung: Glad it was helpful! A "super thanks" at the lower right corner is also a great way to show your support to my channel. Thank you.

@palashjn07: Have you tried both methods? If you did everything you could but it is still not resolved. Uninstalling and reinstalling Factory talk view studio might be the only option left.

@ScadaHub: Glad it was helpful! A "super thanks" at the lower right corner is also a great way to show your support to my channel. Thank you.

@suelectronico: Glad I could help!

@BilalAhmed-bz5mo: The sample codes are provided in the video description. You need to make sure your microSD is formatted to FAT32. Good luck! Thank you for subscribing to my channel.

@shelnasannie8856: Yes it is. Please see part 3. Thank you for subscribing to my channel. th-cam.com/video/NhnU071xKpM/w-d-xo.htmlsi=HMz_-m57OpbhZ1xh

@shelnasannie8856: Glad I could help!

@psr505: you can contact your local Allen Bradley distributor for this shipping label. You will need to ship to Allen Bradley repair center. I did it once a while ago. Good luck!

@rubendavidperezb.chaveco4062: Thank you for your comments. Hope you learned something useful from my videos.

@pablocarruego2912: Glad I could help! Thank you for subscribing to my channel.

@user-jv9hk2je4s: Thank you for your comments.

@Isaac-qd6gy: Glad I could help!

@jdlf3712: Thank you for subscribing to my channel. Unfortunately, I am not familiar with visionview cognex. Is it from Rockwell?

@abrarahmednabil1283: Thank you for your support to my channel.

@wandersonpereira9884: My pleasure! A "super thanks" at the lower right corner is also a great way to show your support to my channel. Thank you.

@diegojavierpalomequechavez5376: Glad it was helpful. A "super thanks" at the lower right corner is also a great way to show your support to my channel. Thank you.

@BonjoRo-zx5zm: How can I help you?

@alanparker7029: Thank you for your support to my channel.

@jd|f3712: I don't think that would be possible. PLC is PLC. It's not an HMI. HMI can see and display everything (data) in the PLC because that is what it is designed for.

@@SYPHOANG sorry, what I mean is If is possible in the PLC with GSV or another instruction monitor the connection with HMI

@jd|f3712: Unfortunately, it is not possible. Thank you for subscribing to my channel.

@iggaming178: Somachine is the old software. Schneider has changed it to the new software named Machine Expert 2-3 years ago. If your controller has a newer firmware with the later software Machine Expert, you will not be able to see it in the old Somachine software. You might have to install the new Machine Expert. Good luck.

@ansonkiek6471: First, I think you are running into the same problem I was facing a while ago. However, there is no solution for the DH485 HMI replacement. First, you need to know that DH485 and DF1 are not the same. It is not just the physical layer difference between RS-232 and RS-485. It is a total different communication protocol. If PLC channel 0 is set for DH485, you will have to have a the converter 1747-UIC I showed in the video in order for your computer to communicate with the PLC. Second, you should not change channel 0 on your PLC to DF1. The reason is DF1 communication protocol will work only between 1 PLC and 1 HMI. Your PLC channel 0 is set for DH485 because I believe there are multiple HMI's in the network communicating to the same PLC. If you change PLC Channel 0 to DF1 and make it work with the new Panelview Plus that supports DF1, how about the rest of the HMI's or devices in the network? You will run into the more serious network problem. My recommendation is to try your best to keep the same communication protocol DH-485. You have to think of the other devices in the network that are currently communicating to the same PLC. It is a DH-485 network. I know it is almost impossible to find the new HMI that supports DH-485 in 2024. However, that is our only option. Refurbished HMI's with DH-485 are still available somewhere that you need to search out. If you like my channel and my response is helpful, "super thanks" at the lower right corner is a great way for you to show your support to my channel. Thank you.

@@SYPHOANG actually customer want to preserve old PLC SLC504 and SLC 504 previous setup is DH485, to pair with panel view plus factorytalk view need to set RS232 which is DF1 in AB protocol and plc as well also need to DF1 full duplex told by AB helpline the recommended cable 9300-USBCBL-CP3 which is directly connect SLC 504 channel serial to hmi usb, but before that , i need online change the channel 0 from DH485 to RS232 , that why i ask you is that any normal cable can just online which the converter you had just shown on video

@ansonkiek6471: As mentioned earlier, you have to use the 1747-UIC for the required conversion. Rockwell tech support told me the same thing because they no longer make any HMI's supporting DH-485. It's critical for you to verify with customer if they have anything else connected to the same PLC with DH485 communication protocol. The PLC port was set for DH485 for a reason. Good luck.

@farshada1889: In the video, I used the cable 1747-CP3 and RS-232 to USB converter to connect the PLC to my computer. But the cable 1756-CP3 should work as well. If you like my channel and my comments are helpful, "super thanks" at the lower right corner is a great way for you to show your support to my channel. Thank you.

@megamanwins: Thank you for your support to my channel.

@Kafer_Gmo: Thank you for your support to my channel.

@MrFernandoBedoya: A channel membership is only $6.99 a month. My email address is available for all channel members for a much better communication and more responsive support. th-cam.com/channels/yyYzqg0sp_W7CW9ScZh-zA.htmljoin Anyways, for windows10, at the lower left corner, click on the magnifying glass, search for "Control Panel". You should be able to locate "Network and Sharing Center" in the ""Control Panel" window. If your computer is like mine, it should be on the left and the fifth one from top. It might show up differently on windows 10. After connecting the PLC to your computer, you should look for and click on "Ethernet" at "connections". It is under "Access type: No Internet access". Being a channel member with a very minimal subscription fee of $6.99 a month is a practical way for you to show your support to my channel. Of course I still answer/reply to all comments even if you do not want to join in. It is just a quicker and more detailed response for channel members. Once again, thank you for your great support to my channel. If I am not mistaken, you have left a few comments on my videos once in a while since I first created this channel in 2019.

@meesumnadeem6512: Thank you for your support to my channel.

@hafizahmad3597: Unfortunately I am not familiar with Siemens PLC's.