I'm jealous I didn't think of that jam jaw chuck Ronald. What a brilliant idea!. Never made such a pendant, but I've turned many a small box lids etc and had more than my fair share of traditional jam chuck failures. I won't forget that in future, thank you !.
i have made something similar in the past with double sided tape , with moderate success , love this idea. thank you for sharing and having so much fun while you are doing it. love your channel
Very simple and effective jig for turning these pendants. Nice! I have turned a number of offset pendants on my off centre jig and double faced tape. But this is genius and easier. Well done.
That's a lovely design, and I really like the double-sided "chuck" with the eccentric option. I've been cautious about eccentric turning because my lathe is small and it flexes badly when turning something out of balance - this resolves that problem in one easy move! Once again you are a source of inspiration and humour that is most welcome!
Very very cool Ronald, a nifty creation which I wished I'd seen earlier to make for my 18 grandchildren coming for Christmas next week. I'll put this idea aside till next year. many thanx and merry Christmas to you.
Hey Ronald, when you did your impression of friction, my dog sat up and replied with a funny little bark- i didn't know you could speak in hound language. Great video!
Great project Ronald. I have an off-center shuck, but don't like using it because I have to use double-sided tape. I like this method, and will play with it to see if I can do something with the off-cuts that I have. Thanks for showing the process.
Wonderful Ronald. Very nice pendant! Let me give it a go and see if I can scale it down even more to make two earring pendants to go with it. Will be fiddling but hey no pain no glory. Happy Christmas for you and your beloved ones, cheerio, Frank
Super, dass es als Audio übersetzt wurde, die Übersetzung ist zwar auch nicht besser als die schriftliche, aber man kann sich voll auf das Video konzentrieren, und muss nicht ständig die Untertitel lesen, was dazu führt, dass man einiges übersieht. Einziger Nachteil: Der Charme und der Witz deiner Stimme geht verloren!😁🤣 Qualität der Darbietung: Super, wie immer - Danke!
Die ga ik ook een keer proberen, duidelijke uitleg. Heb alleen een vraagje, waar kan ik bv olijfhout kopen ? woon zelf in zuidholland maar kan hier in de omgeving niets vinden
Bij mij! 🤣 www.dehoutdraaierij.nl/shop/venetiaans-olijfhout-481#attr=3295 Maar je kan ook een andere houtsoort pakken hoor! Als het maar dicht en hard is. Haagbeuk of taxus zou het ook kunnen doen...
Your videos are such a pleasure to watch. The zen energy is wonderful. Thank you for creating this content, and thank Lies for adding so much as well!
That chuck to hold the pendant is pure genius. Love it! Great video as always.
Thanks Ronald for the demonstration. I like the chuck idea, easy to do
Take care
Seasons Greetings
Cheers
Harold
I'm jealous I didn't think of that jam jaw chuck Ronald. What a brilliant idea!.
Never made such a pendant, but I've turned many a small box lids etc and had more than my fair share of traditional jam chuck failures.
I won't forget that in future, thank you !.
Excellent, Entertaining, and fun! And exquisite product!
I like that you show all the catches and grabs and wood farts, and not edit them out.
i have made something similar in the past with double sided tape , with moderate success , love this idea. thank you for sharing and having so much fun while you are doing it. love your channel
Ich bin ganz begeistert. Nicht nur von dem wunderschönen Anhänger sondern auch von der originellen Herstellung. Bravo!!!!! 🎉
Very simple and effective jig for turning these pendants. Nice! I have turned a number of offset pendants on my off centre jig and double faced tape. But this is genius and easier. Well done.
That's a lovely design, and I really like the double-sided "chuck" with the eccentric option. I've been cautious about eccentric turning because my lathe is small and it flexes badly when turning something out of balance - this resolves that problem in one easy move! Once again you are a source of inspiration and humour that is most welcome!
Your tool work has improved.
Ronald a great looking pendant 👍
Good morning 🌅, very nice pendant, , from friends,
thank you!
Beautiful pendant, you’re very talented and creative. Thanks so much for sharing your knowledge. Take care and stay healthy and safe.
Very nice!
Superb careful work-exquisite piece of jewellery anyone would be proud to wear. Video is crammed full of interesting tips and techniques. Thanks,
Cool chuck, cool product...hope I'm not cold this Christmas if I've reclaimed all my firewood offcuts!
Best to you both.
Very good video ... professional presentation and expert photography (thanks to Lies!).
Very nice Ronald. Thank you for sharing. See you on the next one
Gaaf Ronald, wat een geduld! Wel leuk om eens te proberen.
Another outstanding video! Great pleasure to watch!
Great work Ronald!! Thank you for making this for us to enjoy.
Very nice. Thank you for sharing.
That's a lovely design and a very useful technique, thanks Ronald.
Very very cool Ronald, a nifty creation which I wished I'd seen earlier to make for my 18 grandchildren coming for Christmas next week. I'll put this idea aside till next year. many thanx and merry Christmas to you.
Schitterend.....dankjewel!!!!
Great idea for the jam chuck. You are smarter than you look. LoL. 😂. Thanks for your videos and ideas.
hahaha! if i was as smart as I look I would never had started woodturning... :-)
@@ronaldkanne😂
Hey Ronald, when you did your impression of friction, my dog sat up and replied with a funny little bark- i didn't know you could speak in hound language. Great video!
well, i tried to keep that a secret... but now you know... :-)
Very creative. I always enjoy your videos.
Beautiful, thank you Ronald!
Great project Ronald. I have an off-center shuck, but don't like using it because I have to use double-sided tape. I like this method, and will play with it to see if I can do something with the off-cuts that I have. Thanks for showing the process.
Great video.
Very nice piece.
Wonderful Ronald. Very nice pendant! Let me give it a go and see if I can scale it down even more to make two earring pendants to go with it. Will be fiddling but hey no pain no glory. Happy Christmas for you and your beloved ones, cheerio, Frank
@@frankvanderwal4571 u2 Frank! Happy Christmas!
Nice and clever (both you and the piece). Merry Christmas
Merry Christmas to you Bunk!
Mal wieder ein großartiges Video, Dankeschön und grüße aus Deutschland😊
Great job guys. Thank you 😊
Thank you..that was very informative. I will have to try that.
It sounds somewhat like a tortured clarinet. This is a very interesting project, and also beautiful.
I don't know, I never tortured a clarinet... :-)
@ronaldkanne Somehow, I knew you would say this. ;-) But the music in the video had clarinet, and it sparked the comparison.
Hij is weer goed Ronald
Fantastic job I will attempt this
You can't see me in your next video but I can see you. Nice pendant. 🙂🙂
nice one !!
Weer een mooie! Ik plan er ook te maken voor de vrouw en dochter.
Excellent quiet work of master Ronald, salü from Luxembourg 🇱🇺 part of Benelux 😊
Free tip, use a pipe cleaner for the grooves. Nice video Ronald.
I had no idea unil min10 how this a fit together 😂 great clip!
That jamb chuck will be reusable and the grooves on the eccentric side will serve as a template for batching.
@@dakotamax2 yes completely right! So it becomes easy to do series pendants this way... 😀
Thanks Ronald. Great video. Can you tell me what live centre you are using in the tailstock. I can't fin anything like it. Thanks
Hi Nick, look for a cup live centre 😊
It is made by Oneway from Canada. search for "Oneway livecenter 2064"
@@ronaldkanne Thanks so much Ronald.
Super, dass es als Audio übersetzt wurde, die Übersetzung ist zwar auch nicht besser als die schriftliche, aber man kann sich voll auf das Video konzentrieren, und muss nicht ständig die Untertitel lesen, was dazu führt, dass man einiges übersieht.
Einziger Nachteil: Der Charme und der Witz deiner Stimme geht verloren!😁🤣
Qualität der Darbietung: Super, wie immer - Danke!
Great video! Definitely trying this one 😊
Also What lathe do you have?
@@Asafzarbiv this is a Robust American Beauty...
Robust Dutch Beauty....
@@NBCRGraphicDesign that's me... 🤣🤣🤣
Danke Ronald für das schöne Video und Tolle Projekt wie würdest du eine Kette oder Lederband befestigen
Grüße Herbert
Kleine Ebenholz kugel drauf mit ein Loch drin... und das soll noch vor Weinachten passieren! 😆
@ Dankeschön wünsche dir und deiner Familie ein schönes Weihnachtsfest
@piccoloswoodwork5640 gleichweiss!
Die ga ik ook een keer proberen, duidelijke uitleg. Heb alleen een vraagje, waar kan ik bv olijfhout kopen ? woon zelf in zuidholland maar kan hier in de omgeving niets vinden
Bij mij! 🤣 www.dehoutdraaierij.nl/shop/venetiaans-olijfhout-481#attr=3295
Maar je kan ook een andere houtsoort pakken hoor! Als het maar dicht en hard is. Haagbeuk of taxus zou het ook kunnen doen...
@@ronaldkanne Oehhh , die zag ik niet aankomen. Ga even op je site rondneuzen
👏👏👏👏👏👏
How much for that drilling machine?☺
it is priceless...
@ronaldkanne 🤭
🤘🤘👍
Er zit een kerstengeltje in
@@lydiarol7892 dat is, denk ik, een paashaas...🙂
@ronaldkanne lekker op tijd.
And you please tell her cuckoo clock to be quiet, 🤫 😂
nope... :-)
Ai die vallende sleutel..🙈
ja... iets hou je altijd... :-)
В конце поржал. Деньги не нужны - только время. И токарный станок, и патрон, и резцы - хурма какая. Да у меня есть все и это весьма не дешево.
Hahaha... yes, you are completely right...