I am so glad you did this video. It really confirms I am on the right track. I picked up a used ShoreLand'r jetski trailer this week and I was looking on TH-cam to see if anyone else modified one to fit a small pontoon boat. I purchased a Field & Stream Angler 10. I didn't want to put it on a flat bed utility trailer and then have to unload it off the trailer and then drag it into the water. That sort of defeats the purpose of having a boat trailer. I am glad you pointed out why you would want a boat trailer vs a utility trailer. Great video! Thanks!
Jim, I've been reviewing boat mods on the tube and keep coming back to yours. Very well though out. I just bought a Bass Raider 10E and plan on making similar additions to my boat and trailer. Look forward to future videos.
I've got a jet ski trailer I've yet to modify, but this gives me some good ideas. I'll have to grind my brackets off and reweld, but shouldn't be too bad. Already thought about extending tongue. You're right about it being too short. Where did you buy your brackets? I'll need those bigger ones for sure.
If the wood goes and it is time to replace it, try engineered decking boards. I used 2 of those in mine. No carpet needed. No waterproofing or painting needed. Easy to slide things on them too.
I’ve got a 14 ft long jet ski trailer I’m fixing up like yours. I cannot find a bunk bracket anywhere, like the one you used on the 2x8s. Can you tell me where you found those? Thanks!
Hi Ryan, I live on a 64 acre lake, so I just back down the boat ramp & launch, so I don't use a transom saver. But if you're going to be trailering on the road, I would always use a transom saver!
I watched this video like 20 times. A easier way would be to get: (8) 12 “ Galvanized Swivel Bunk Bracket Kit instead of drilling holes into the trailer frame with L brackets ( he used 4x for this build) Here he uses 4x 5 inch L brackets & 4x 8 inch swivel brackets The 12 inch galvanized swivel bunk brackets are cheaper when you buy them in a quantity of eight and you also have the vertical clearance for your center pontoons
Super Nice video, Thank You. I will do it for my trailer.
Take all that contraption off and lay a sheet of plywood down. Then use the stake pockets as for uprights and 2x4 for rails. Done.
I am so glad you did this video. It really confirms I am on the right track. I picked up a used ShoreLand'r jetski trailer this week and I was looking on TH-cam to see if anyone else modified one to fit a small pontoon boat. I purchased a Field & Stream Angler 10. I didn't want to put it on a flat bed utility trailer and then have to unload it off the trailer and then drag it into the water. That sort of defeats the purpose of having a boat trailer. I am glad you pointed out why you would want a boat trailer vs a utility trailer. Great video! Thanks!
turned out good thanks for sharing man
Nice job on the under carriage! I would like to see your stop on the front. The wench setup.
Thanks
I really like your idea on centering boat up with balster brackets and 2x4s.
Looks good Jim. I’m looking into getting a jet ski trailer and convert it. This video will help thanks!
Same here! Just picked one up, this video gave me great insight!
Steve Riggs I bought one yesterday morning lol
Steve Riggs I built a deck for my bass Raider also if you want to check it out on my channel
DRock Fishing will do! Thank you sir!
Steve Riggs Thanks Steve!
Jim, I've been reviewing boat mods on the tube and keep coming back to yours. Very well though out. I just bought a Bass Raider 10E and plan on making similar additions to my boat and trailer. Look forward to future videos.
Where can I find the 5 inch bunk brackets
Thanks for sharing.
great idea
I've got a jet ski trailer I've yet to modify, but this gives me some good ideas. I'll have to grind my brackets off and reweld, but shouldn't be too bad. Already thought about extending tongue. You're right about it being too short. Where did you buy your brackets? I'll need those bigger ones for sure.
Hi Zack,
Got everything from Boat Trailer Parts, 10808 US Hwy 92, Tampa, Fla. 33610:
5.5" Bunk Brackets $6.85 Ea.
8" C-Channel Bunk Bracket Kit 8" for 1.5x3" XMEM $35.50. Good luck!
If the wood goes and it is time to replace it, try engineered decking boards. I used 2 of those in mine. No carpet needed. No waterproofing or painting needed. Easy to slide things on them too.
I’ve got a 14 ft long jet ski trailer I’m fixing up like yours. I cannot find a bunk bracket anywhere, like the one you used on the 2x8s. Can you tell me where you found those? Thanks!
Bought them from "Boat Trailer Parts", 10808 US Hwy 92, Tampa, Fla. 33610. $27.40 for 4
Can you show us how you strap down the bass raider ? Can’t just be just the strap on the front right ?
I just attached an eyebolt on the left/right sides of the trailer. I use a ratchet strap across the rear deck to each eyebolt. That holds it great.
Do you transport the boat with the motor on. If so do you use any type of transit saver?
Hi Ryan, I live on a 64 acre lake, so I just back down the boat ramp & launch, so I don't use a transom saver. But if you're going to be trailering on the road, I would always use a transom saver!
I watched this video like 20 times. A easier way would be to get:
(8) 12 “ Galvanized Swivel Bunk Bracket Kit instead of drilling holes into the trailer frame with L brackets ( he used 4x for this build)
Here he uses 4x 5 inch L brackets & 4x 8 inch swivel brackets
The 12 inch galvanized swivel bunk brackets are cheaper when you buy them in a quantity of eight and you also have the vertical clearance for your center pontoons