I couldn’t wait to get home from work and watch this. The drag scene is getting hot and you struck while the iron was Brother. Those runs were super clean. You found the 2s sweet spot.
To get better times you're going to have to try to keep the front wheels on the ground. Adjust your wheelie bar accordingly. And then practice your 60 ft. If you can keep the front end down you got it made plus traction of course. Good luck bud I'll keep watching....👍👍👍
Weight on the front end = 75+ I'd bet. the green body is by far my favorite, it's so hard to resist the urge to pick one up lol. excited to see more from this car. thanks!
Nice video!! Really like that body! That rig has some speed. Once you master that launch that time will drop a lot more. Thanks for showing that there are options when it comes to buying a drag car. Most expensive doesn't always mean its the best.
You are so right! Power is nothing without control! Some people also think Power it is the most important point for Speedruns, but in my opinion is this is wrong. Efficency and Aerodynamic are very important things! Also for Drag Racing a truck body is not the best choice😉
Wow that thing is fast good work fella and keep the awesome videos coming 🚗 I have just got back into RC cars myself after 25 years after finding my old tamaya car I built over 25 years ago the old electrics went up in smoke but what do you expect after all that time lol will have to wait t get some new ones as I was made redundant from my job due to covid but your videos keep me going thanks again 👍👍👍
Ok ok thank you for the great videos!!!! I'm a rock crawler, with that said im looking into the no prep drag racing, an this video really helped!!!!!! Thank you sir !!!!!!!!....
I tossed in a dumbo Gyro keep me straight wide open, 120amp esc and 3650 9000kv in a bezgar 1 hm101. Snow here so just been sending it through the powder but should be a drag beast. It has a late model Chevy styled body too..I plan on getting a bangood version to make 2wd
The G force was so powerful it ripped the shell clean off and the flaking on the the bumpers is from the re entry like a space shuttle 😂 quality vid as usual 👍👍👍👍
Looks like you’ve lost some weight, I was going to say looking good but I just wanted to make sure you were doing ok and the weight loss wasn’t due to illness. Also have liked the last few videos. I loved this one. I’m gonna try to get a dragster like this.
I am getting really close to pull the trigger on one of these especially now a dragbug body is on the way, I may have to investigate your man doing the painting ,would be awesome to have a few run what you brung meets somewhere imo
On 3s you do need a longer and adjustable wheelie bar stiffen the preload on the rear shocks one or two clicks, change your pinion up two teeth or more? Depending. Seems like the traction is on that surface. But on others you may have to resort to a tire prep solution like for example pimp juice. On 3s your motor torque is almost double. All those tweaks will help manage that. But there no replacement for testing and gaining experience. Also log all of your data. Either by sensor’s or benchmarks. Have fun! Hopefully get to see ya on a no prep race someday 😃
Hey, I love C-10 bodies as you can tell from my profile pic. For day everyone running 2s battery but with a 1500 mil amp that's a powerful battery it's running pretty quick. Just wanted to tell you that.
Can you move the Esc forward to help keep the front down more or just add a coin or two to the front axel to help the front stay lower to give some steering input during the first 60 feet. Its clear its getting PLENTY of traction with those power wheelies! Looks fun I think I'm gonna get one soon, My local track is redoing there parking lot and I think drag racing may soon be a thing at my lhs!
I like how rc drag racing is becoming popular as I love doing it except in full scale 😁. I definitely wanna get 1 but I wanna do some research to see if I can convert it into a 'gasser' style as those are my favorite to see and watch
Yeah they def are. There's a local small airport by me and they shit down 1 runway and do a 50's/60's nite and it all vintage dragsters with good food,haha. Def a cool and fun event. Only downside is no video taking or photos due to security reasons for the airport. Locals are cool and respect it,it, not so much.. but it's all good
Put a lil weight on the front, tune that left rear shock, maybe a bit of expo on your throttle and that lil lady will be screamin’ !! Great video brother as always👍
Dang TomleyRC that is a pretty cool dragster for out of the box 📦 I can’t wait to have more toys hahaha so far this Granite I have is awesome for all around where I live but she doesn’t like driving straight out the box. I’ll get a dragster so if you still move to Canada 🇨🇦 we can drag. Time for real set lights and everything now Tom ! Great video as always
If you set it up to where you can push the suspension. Down to where the wheelie bar touches it will go a lot straighter and if you give it too much throttle it will spend instead of wheelie and going hard one way
Skyrc toro ts150 pro aluminum has turbo timing an all I got one for 125.67 cad and then get the program card aswell it's a great esc at quarter the price of the other ones on the market too, I picked up a mamba X extreme 6s for 240cad and im liking the sky rc ts150
Looks like you need to get one of those RC corner balance weight sets (made by the same people who make your speed meter). Needs more weight on the nose infront of the front wheels as it has the power, you just need to keep the nose down. Be interesting to see if the stock body makes a difference to the run times, alot of wind resistance on that c10 body. Would switching to velcro be the way to go to hold the body on ????
If you buy a blue tooth module u can actually mess with sensorless timing for the sw4. Its a better esc then the vxl esc haha. The mamba x you can get all the goods for tuning though. I have both amd love them for bashing. Tekin is my racing go to
Try lowering your wheelie bar down a lil bit. Push the rear end of the truck down and let it return to ride height, measure the space below the bottom of the wheel and set it to 10mm. You may need some shock tuning as well a a diff fluid change. Looks like a good surface so 500k should work good. Then you should be able to handle those full throttle snaps. 🍻
This is the way! Even if it costs more than the 500$ of a Drag Slash I would much rather spend that 500 towards actual tunable electronics and parts. Any decent remote can setup a " trans Brake" that's nothing new. Just set a custom button for a brake & done. Just my personal thoughts on it.
I think I'll have to get a drag car! DR10 roller or RTR. The roller is probably the way to go as I'd change everything eventually anyway but then the RTR gives a out of the box bench mark, and all the spar parts will get used somewhere... 🤔
Yes...tough choice. You get quite a bit extra with the RTR for not a massive difference in price. I’d go for an RTR and sell off the bits you don’t need 😎👌
Now here,s an off road drag racing, remember you heard it from me first, bro 🤔,,that rival looks so nice😅😅,,and them castles motors I seen on youtube catch on fire,,seems to be a problem, 🤔fast car though bro,,nice flip😅
@@TomleyRC so what about off road drag racing car reckon you could make one,,,I got the idea you got the skills to build,,first test in my garden, 🤔 a many a good thing has come from just idea,s,,,bro🤔
I watched 1320 video on TH-cam about a cash day with a massive pot. Is there the same sort of thing in the UK for drag racing RC cars would be good to set something up.
Get a tekin RS pro 2 pole setup with a 2 pole motor for a fast 2s setup. At least a 4.5t motor starter then move to a 3.5t or 2.0t. 2 pole are faster on 2s rather then 4 pole setup.
500k - 1mil dif fluid.. dont lock it. 60wt rear shock oil. 50wt front. Adjust rear shocks more vertical. Gear for 55 mph @132'. Get Proline reaction tires. Carpet burnout. 2s only. No gyro. Adust for straight launch by adjusting rear preload..(more on side which it veers) Adjust for any veer on the "settle" by front shock preload tuning. Same as rear. Ur gonna get bit by the drag 🐛.. haha Congrats mate!
So, basically you put a 2x faster motor in it, and so of course it's faster. But in a pro stock class you can't run that motor, and in outlaw it's too slow (no sensor or boost/timing) so basically it's a fast parking lot racer, and you could try to race in outlaw.
A little late on commenting but have u tried tuning or reprogramming the ESC using the B-Link that castle offers or the Field Link programming card they offer ? Definitely can get more out of it with timing start up power and much more
I really hope this style of RC meet up takes off in UK. Those guys in the states are having all the fun. I could so get into drag racing.
I hope so too... it’s good fun!
Man ! That c10 looks great poppin’ wheelies. I love drag cars i cant wait to get one
I used to think that drag racing was all about power with little skill involved - till I tried to do it.
Yes 😅
How much are they in the UK please
I couldn’t wait to get home from work and watch this. The drag scene is getting hot and you struck while the iron was Brother. Those runs were super clean. You found the 2s sweet spot.
Yes... a bit more tweaking to go!
To get better times you're going to have to try to keep the front wheels on the ground. Adjust your wheelie bar accordingly. And then practice your 60 ft. If you can keep the front end down you got it made plus traction of course. Good luck bud I'll keep watching....👍👍👍
Weight on the front end = 75+ I'd bet. the green body is by far my favorite, it's so hard to resist the urge to pick one up lol. excited to see more from this car. thanks!
I’m aiming for 2.5s from this 😎👌
Another great video with the RIVAL MT still sitting pritty you will soon be on 50k buddy love watching your channel grow
Thanks Si
Another great video! Thanks for always entertaining me at coffee time. One of the best RC channels in my opinion.
Keep it up!
Coffee time... now we are taking 😎👌
I love the orange. Cool rig. Shoutout from Canada
Cheers dude
Great work on the runs with the different cameras!
Thanks mate
Really thank you !!!!! The DR10 is gonna be my choice!...thank you...again...
In the 2seconds is really good mate , mine uses a Losi 3.5t motor and hobbywing esc
Nice video!! Really like that body! That rig has some speed. Once you master that launch that time will drop a lot more. Thanks for showing that there are options when it comes to buying a drag car. Most expensive doesn't always mean its the best.
I’d like to see how close I can get to 2.5s
Isn’t that a drag slash body?
You are so right! Power is nothing without control! Some people also think Power it is the most important point for Speedruns, but in my opinion is this is wrong. Efficency and Aerodynamic are very important things! Also for Drag Racing a truck body is not the best choice😉
Wow that thing is fast good work fella and keep the awesome videos coming 🚗 I have just got back into RC cars myself after 25 years after finding my old tamaya car I built over 25 years ago the old electrics went up in smoke but what do you expect after all that time lol will have to wait t get some new ones as I was made redundant from my job due to covid but your videos keep me going thanks again 👍👍👍
Appreciate the support mate. Good luck on the job hunting 👍
@@TomleyRC thanks mate appreciate it
@@TomleyRC thanks mate appreciate it
Pretty fantastic work, Tomley! 😃
Amazing how fast it turned out!
Stay safe there with your family! 🖖😊
Thanks mate. 😎👍
Ok ok thank you for the great videos!!!! I'm a rock crawler, with that said im looking into the no prep drag racing, an this video really helped!!!!!! Thank you sir !!!!!!!!....
Drag baby. Looks bloody awesome. Very nice setup
Yes... C10 body is nice. Needs wider rears
I tossed in a dumbo Gyro keep me straight wide open, 120amp esc and 3650 9000kv in a bezgar 1 hm101. Snow here so just been sending it through the powder but should be a drag beast. It has a late model Chevy styled body too..I plan on getting a bangood version to make 2wd
I really love your rig you make me want to get started in the no prep drag race game
Cheers dude
I been wanting to get one, so many other things need to be finished 1st though. Thanks!
Are you having any problems with the rear tires rubbing on the body and removing paint?
Great video good to see better options then the high priced Traxxas
Thanks mate. You can take about £50 off for the body & paint... not really needed. So even cheaper to go faster
The G force was so powerful it ripped the shell clean off and the flaking on the the bumpers is from the re entry like a space shuttle 😂 quality vid as usual 👍👍👍👍
Do you have a video of painting the body? Thanks.
Looks like you’ve lost some weight, I was going to say looking good but I just wanted to make sure you were doing ok and the weight loss wasn’t due to illness. Also have liked the last few videos. I loved this one. I’m gonna try to get a dragster like this.
That's a beast and looks brilliant great videos keep them up going to have a look at one of them now 👍
Cheers John
that Rival mt10 looking pretty sweet!
Yes 😎👌
I am getting really close to pull the trigger on one of these especially now a dragbug body is on the way, I may have to investigate your man doing the painting ,would be awesome to have a few run what you brung meets somewhere imo
Yeah, would love to get a No Prep drag race set up on the UK 😎👌
@@TomleyRC especially if it could be like Midnight Club on the playstation haha ,all need is a pop up timing setup
On 3s you do need a longer and adjustable wheelie bar stiffen the preload on the rear shocks one or two clicks, change your pinion up two teeth or more? Depending. Seems like the traction is on that surface. But on others you may have to resort to a tire prep solution like for example pimp juice. On 3s your motor torque is almost double. All those tweaks will help manage that. But there no replacement for testing and gaining experience. Also log all of your data. Either by sensor’s or benchmarks. Have fun! Hopefully get to see ya on a no prep race someday 😃
Hey, I love C-10 bodies as you can tell from my profile pic. For day everyone running 2s battery but with a 1500 mil amp that's a powerful battery it's running pretty quick. Just wanted to tell you that.
Gorgeous rc, well done
Can you move the Esc forward to help keep the front down more or just add a coin or two to the front axel to help the front stay lower to give some steering input during the first 60 feet. Its clear its getting PLENTY of traction with those power wheelies! Looks fun I think I'm gonna get one soon, My local track is redoing there parking lot and I think drag racing may soon be a thing at my lhs!
Yes... a bit of tweaking etc.. that’s half the fun 😎
I like how rc drag racing is becoming popular as I love doing it except in full scale 😁. I definitely wanna get 1 but I wanna do some research to see if I can convert it into a 'gasser' style as those are my favorite to see and watch
Gassers are awesome!
Yeah they def are. There's a local small airport by me and they shit down 1 runway and do a 50's/60's nite and it all vintage dragsters with good food,haha. Def a cool and fun event. Only downside is no video taking or photos due to security reasons for the airport. Locals are cool and respect it,it, not so much.. but it's all good
Put a lil weight on the front, tune that left rear shock, maybe a bit of expo on your throttle and that lil lady will be screamin’ !! Great video brother as always👍
Yes... good shout. Cheers dude
looks great with that body bud :) cringing watching it fly off though . Good video 😃👍
Haha
Tint the windows mate with some tamiya smoke will look 👍👍
Golly! That truck is really aerodynamic! 🤪
Yes haha
I'm not that bothered with RC drag cars, but I still smash that notification for a Tomley video :D
Legend
Dang TomleyRC that is a pretty cool dragster for out of the box 📦 I can’t wait to have more toys hahaha so far this Granite I have is awesome for all around where I live but she doesn’t like driving straight out the box. I’ll get a dragster so if you still move to Canada 🇨🇦 we can drag.
Time for real set lights and everything now Tom ! Great video as always
It’s on....
Awesome!! Love thar car!! This hobby is getting more and more expensive!! 🤣👍🏻
Haha
I envy that dry street and beauty of a truck
Did you say with the stock gearing ? I believe your battery is loosing power, that the drop on them numbers
If you set it up to where you can push the suspension. Down to where the wheelie bar touches it will go a lot straighter and if you give it too much throttle it will spend instead of wheelie and going hard one way
Yes... a lot to learn
Nice work man...love the colour...
Cheers dude
I would look into getting an Exotek wheelie bar
Love my dr10. Good effort dude
Thanks mate
@@TomleyRC great little cars ain't they. Love how well built it all feels
I love the wheelies! It's cool!
"I Do Not Like It"
"I LOVE IT" 😂🤣😂🤣😂
😎👌
Now this is something I wanna get into ....and that my friend looks sic !!!
Thanks dude
How much does the car weight and tires 🤔
You need to adjust your wedge. Notice you always kick left on launch, add preload to one side to equal it out.
Awesome video tomley I really like that body 2. You should do a drift video when it rains?
Yeah that would be cool
I was wondering what speed tester you use I’m trying to get one for under £50
Skyrc toro ts150 pro aluminum has turbo timing an all I got one for 125.67 cad and then get the program card aswell it's a great esc at quarter the price of the other ones on the market too, I picked up a mamba X extreme 6s for 240cad and im liking the sky rc ts150
140 likes no dislikes in one hour, that's your channel 👍👌
You jinxed it haha... I think I managed 300 likes with 0 dislikes on the last video! I was in shock!
And as of right now it looks like 3 little piggies afraid of the big bad wolf.
@@SPEXWISE they probably just bought the drag slash
I would put the esc in the middle of the battery tray and buy a shorty battery and use the foam block in between them.
Body looks cool 👍 simple tip it seems to go left just tweak the wheelie bar a bit it works with the real thing might help you.
Yes.... or stiffen the shock a little
@@TomleyRC ye keep at it though I'm sure you will have it flying as straight as a arrow 👍
Looks like you need to get one of those RC corner balance weight sets (made by the same people who make your speed meter).
Needs more weight on the nose infront of the front wheels as it has the power, you just need to keep the nose down.
Be interesting to see if the stock body makes a difference to the run times, alot of wind resistance on that c10 body.
Would switching to velcro be the way to go to hold the body on ????
Bit of suspension tweaking reduce some twist off the line get you tracking straighter.
Yes agree 👌
You Make really good vids , I cannot believe you aren’t on 500,000 subs
Thanks mate. Appreciate the support
Try adding ballast up $onto to keep the nose down
I wish that drag racing didn’t just get super popular and then fade out… it’s still super fun in my opinion
With tuning and stock motor/esc a drag slash will run 2.7s
We've got stock vxl into the 2.5s now
Rival looks fun.
I really Love Car. Really Cool And Fast. I enjoy Your Video! Thanks! 😍😍😍
Thanks dude
Could you do a parts expose on this car? Love it!
Great video very helpful as been looking at one of them 👍🏼
That's really cool truck 💯👍
If you buy a blue tooth module u can actually mess with sensorless timing for the sw4. Its a better esc then the vxl esc haha. The mamba x you can get all the goods for tuning though. I have both amd love them for bashing. Tekin is my racing go to
Cheers for the info dude 👌
@@TomleyRC any time my friend!!😁
Looks like you need to stiffen the left rear shock as it’s always pulling left on launch.....
Yes... agree 👍
zippy.. What are the diffs tunes like for drag?
I think they need to be pretty stiff. This one could do with a bit of work
Thank you sir
Love the vid. Was this cheaper with the motor and esc upgrade or stock.
Yes... cheaper with the upgrades
Try lowering your wheelie bar down a lil bit. Push the rear end of the truck down and let it return to ride height, measure the space below the bottom of the wheel and set it to 10mm. You may need some shock tuning as well a a diff fluid change. Looks like a good surface so 500k should work good. Then you should be able to handle those full throttle snaps. 🍻
You were only supposed to blow the bloody doors off!! 🤣🤣. Looks good fun.
🤣🤣🤣🤣
This is the way! Even if it costs more than the 500$ of a Drag Slash I would much rather spend that 500 towards actual tunable electronics and parts. Any decent remote can setup a " trans Brake" that's nothing new. Just set a custom button for a brake & done. Just my personal thoughts on it.
I think I'll have to get a drag car! DR10 roller or RTR. The roller is probably the way to go as I'd change everything eventually anyway but then the RTR gives a out of the box bench mark, and all the spar parts will get used somewhere... 🤔
Yes...tough choice. You get quite a bit extra with the RTR for not a massive difference in price. I’d go for an RTR and sell off the bits you don’t need 😎👌
@@TomleyRC I like your thinking! Its a plan.
Now here,s an off road drag racing, remember you heard it from me first, bro 🤔,,that rival looks so nice😅😅,,and them castles motors I seen on youtube catch on fire,,seems to be a problem, 🤔fast car though bro,,nice flip😅
These smaller ones seem to be fine
@@TomleyRC so what about off road drag racing car reckon you could make one,,,I got the idea you got the skills to build,,first test in my garden, 🤔 a many a good thing has come from just idea,s,,,bro🤔
I watched 1320 video on TH-cam about a cash day with a massive pot. Is there the same sort of thing in the UK for drag racing RC cars would be good to set something up.
I got the losi drag car .this looks nice .
Love the look of the Losi
Great video.
nice! love the body on it, looks sweet
Do people have c10 trucks there?
No... not many about
🇮🇩 i like your video friend 🏎💨💨🏁🏁🏁🏁🏁
By any chance are you going to check out the new Losi drag car?
Yes... not coming to the UK at the moment though
Another great car love the new body on it. Do you plan on racing it?
If it gets popular over here I’ll certainly want to give it a go
Would be good to watch better to join in though 🤔. Keep up the great videos!
How much for this model & where do I get 1?
Links in the description
That is fast bro
Get a tekin RS pro 2 pole setup with a 2 pole motor for a fast 2s setup. At least a 4.5t motor starter then move to a 3.5t or 2.0t. 2 pole are faster on 2s rather then 4 pole setup.
Cheers for the tips dude
First thing I’d do is add a diff locker and if that doesn’t make it pull straight then stiffen the shock on the side that it pulls to.
Yes agree
500k - 1mil dif fluid..
dont lock it.
60wt rear shock oil.
50wt front.
Adjust rear shocks more vertical.
Gear for 55 mph @132'.
Get Proline reaction tires.
Carpet burnout.
2s only.
No gyro.
Adust for straight launch by adjusting rear preload..(more on side which it veers)
Adjust for any veer on the "settle" by front shock preload tuning. Same as rear.
Ur gonna get bit by the drag 🐛.. haha
Congrats mate!
Looks nice, can I recommend window tint? 🚗💨💨💨
Yes... I was going to, but the paint went super thin on the edges so the tint spray would have bled through
Thanks for explanation and its nice to know you had the same styling ideas. 👍
What are you using for telemetry?
cant it go 3s or was it realy on 2s not 3s
No Prep rules are limited to 2s usually
@@TomleyRC what does prep mean
@@maximumrc5466 no prep means that the rc drag strip isn’t treated with special road coatings for traction, so it is solely the drivers skill and car
I want one :)
cool little car...nice vid...
Thanks dude
Did you say that was stock gearing? 👍🏾
Yes... stock
So, basically you put a 2x faster motor in it, and so of course it's faster. But in a pro stock class you can't run that motor, and in outlaw it's too slow (no sensor or boost/timing) so basically it's a fast parking lot racer, and you could try to race in outlaw.
A little late on commenting but have u tried tuning or reprogramming the ESC using the B-Link that castle offers or the Field Link programming card they offer ? Definitely can get more out of it with timing start up power and much more
What spur and pinion gear are you running? Straight stock or changed over to something else?
What is your gearing?
2.9 with 2s?