Awesome video!! Your play field looks better/sharper...Dis you upgrade it? If so what display did you use? As I am looking to change mine to something a little better.
I guess im asking the wrong place but does someone know of a tool to log back into an Instagram account..? I was dumb lost the account password. I would love any help you can offer me
I know it's been years since this video was put out, but I just wanted to say thank you @cooltoy for leading me down the modding TH-cam rabbit hole. Just finished my arcade 1up mod and through your channel I have made a beast of a pinball machine. Again thank you so much for this channel.
Thanks for the feedback. I’ll try to circle back with more details or a livestream workshop that’s longer. I just always get self conscious about regurgitating info that others have done in similar videos.
@@cooltoy I see what you mean. However, I think in this case it be great to have everything in one video. I looked at the videos you provided and not to be mean, but you explain things better, lol. Thanks for all the great videos you do! I can't wait for the software set up video, once that's up I'll begin my journey into modding my cabinet.
Let a longer video roll for mods like this. This will be a reference for people doing these mods. Even if it is soldering the diode. Easier to follow one video than hitting multiple ones. To be honest, I'd probably watch a video of you describing paint drying.
I’m was contemplating doing a “workshop” type of livestream in the future to possibly go over and show more of the nitty gritty details on both the pc side as well as demoing the wiring. It’s just hard to know how much demand for this type of thing there will be and how many people will want or need that info.
@@cooltoy You went over everything very well, but like me and I am sure others, it would be great to see a workshop video to do a little more "hand holding" for people not used to messing with wiring etc. I think your video would be THE definitive video to follow along to create an awesome modded a1up pinball, sort of like how ETA prime has 1 mill+ hits on his 1up cabinet mod.
It’s a very cool experience to hear things from the back of the table, and then the sound move forward toward me. Obviously it would be even greater if the machine was longer as the sound would travel more, but I enjoy the smaller footprint of this machine in my house vs a full scale pinball unit
nice work Doug!! And thanks for the shout out, lol, I probably didn't give the best "how-to" but definitely showed what NOT to do with the Diodes. i haven't done SSF yet great to see ur setup. curious to look at ur DOFlinx file too. thanks!
Wow. Great job on that. The wiring doesn't look too difficult after you understand what goes where. Software I'm guessing isn't that bad either. Will attempt this once I get bored with stock tables. Thanks!
Yet another fine video @CoolToy, you definitely have the knack for this. One note, I don't think a 30 minute video is an issue. If you're really worried about it put links in the description to jump to select parts.
Great work! I did a pinball mod with FX3. Going to add the SSF. A simple video on adding some other tables, VPX or virtual pinball would be great. Terry Redd does great stuff but it’s not COOLTOY!!
Thank you Doug! - I was waiting for this video, and it was awesome. I really want to add haptics to my vpin, and you and BeeKong are making me feel like I CAN actually do it now. The vpin was such a daunting build, that I gave up on haptics when I built it. Now I can finally plan it out and add it. BTW - the sound does translate in the video, I'm sure it is more impressive in person, but I definitely could tell the difference.
I have been waiting to see how this turned out. This looks amazing. Please do more in-depth videos on the pc setup. It also would be really cool for you and Kongs-R-Us to do a live stream together.
Thanks, it’s always hard to gauge how much is too much information and how much isn’t enough sometimes since I never really know who the audience will be
Great tutorial! You’ve convinced me to mod my Marvel 1up. I’m doing the full deal, perhaps overkill as I intend on adding a shaker and gear motor. So far I’ve added the 22” back glass monitor, expanded my DMD with a 3d print overlay, installed 4 transducers, and an 8” sub. Working on de-casing a 32” LG IPS 2k 180hz monitor. I’ve added 6 additional buttons as well. The part I need to figure out is programming my KL25z board. I have a zero delay controller board as well which is pretty straightforward. Any pointers on the kl25z would be appreciated.
Very cool videos - definitely interested in how to tie the tables into a slick front end to "hide" the pc aspects as much as possible! Also an overview of the tables like, are these FX3 only or do you have others included...that's where things get confusing for me, Visual Pinball, PinMame, VPX. I know that's a lot to cover but "bite size" videos on how to add or incorporate would be cool too. Thanks!
Awesome! Well done! Looking forward to your baller installer video. I installed on my vpin and can't figure out how to exit out of an fx3 table back to the pinup popper menu. Hope you can go over that in your video!
Nicely done! Just a slight difference in sound jk. The fact that there is that big of a difference on my phone, I'm sure in person the sound/feel is drastic.
I'm noticing that the external sound card you are using has a volume setting. Do you need the separate amps? If you were to connect the exciters to the USB sound card directly (soldering speaker wire to 3.5mm adapters) does the USB sound card have enough power to drive the exciters?
Really appreciate your take on the mods you have done! Especially on the arcade 1-up pinball tables. Personally have utilized some of these mods myself. Keep up the awesome work and looking forward to your next mod. How can we improve the the tilt feature?
this is the recommended PC specs Zen suggests for FX3. Visual Pinball is much of the same assuming you don't wish to run higher resolution screens such as 4k. OS: Windows 10 Processor: Intel i5-4590 or AMD equivalent Memory: 8 GB RAM Graphics: NVIDIA GTX 970 / AMD 290X
@@cooltoy Thanks COOLTOY, my intention is to have a dedicated plug and play gaming pc primarily for OTG with Legends Pinball so I don't need more than 1080p. Just got mine last Tuesday so still haven't even scratched the surface with the built-in Gottlieb and Zaccaria packs to keep me busy for now. Thanks for the reply, I greatly appreciate it!
Thanks for the vid. I've been meaning to do the exciter (and solenoid) mod ever since I saw your video 2 years ago. Now that I've wired everything up, I'm having a heck of a time getting the SSF to work. I'm wondering if I need an amp for the back box original speaker b/c I can't hear them when I test the 7.1 configuration. And I have no idea how to get doflinks started for FX3, despite having watched the video in the description.
Thanks for a great mod, just finished installing solenoids and configuring the ini's and more with the DOFL config tool and following your files. Does FX3 animated back glass work on Pinball Popper? Thanks!
Looks Great CoolToy. I wouldnt be able to do that. you must be playing the Visual Pinball X tables. I would like to get a AtGames or Arcade1Up machine. but will wait it out to see if both companies come out with some upgrades. they can do alot better with their machine. I would like to see a bigger dmd screen like some of the new stern pinballs. it's a 15.6" screen. and bigger playfield screen.. they should come out with differnt models with differnt price points. I would spend more for one
Man I wish I was smarter with all this. I’d love to do it. Hoping Arcade1up makes gen 2 of their pinball machines with WiFi access and the ability to just buy all the zen tables.
Doug I'd love a workshop livestream where you can go into full details for everything step by step. Your project looks amazing so far! Where did you get the Mario Backglass?
Thanks again for this tutorial! 2 Questions: 1) What type of wires did you use to connect to the diodes, and from the terminal board to the sainsmart? Would standard button wires work for that? 2) Are you using the default power plug that came with the A1U pinball or from another A1U cab? Do you recall the specs on it (12v 3a I think?) Thx
Any pointers on get DOF to recognize the SainSmart? I have everything installed (hardware and software) DOFLinx log states that there are no output devices found. Did you run into anything similar? Thanks and keep producing your great content!
Really slick work here. I like how you used the common-rail approach to wire up all the power. It's just like I see in the bottom of my actual Gottlieb System 80 machine. The electrical tape made me shudder a bit but if it works that's all you need. Are you going to tidy up all the amps hanging off the back and install those inside at some point?
I soldered and crimped my diode connections and then put electrical tape over it all as an overkill precaution. Don’t worry it wasn’t just taped together, and yes I’ll be cleaning up the back end wiring as well. I left it all on the outside so I could easily show the connections in this video
Have you tried to use external computer speakers with the stock setup? I’m trying to use the cheap Logitech system everyone uses for arcade 1up stuff but getting choppy feedback whether I use a spitter and use the stock speakers with the logi sub or use all the logi speakers
I set my cabinet exactly like yours 32” screen and all. Thought I saw your dfconfig file before but don’t see it now. Wondering if you would be willing to share. Been tweaking mine but can’t seem to get the plunger and nudge to work as well as I would like. SSF is awesome.
@cooltoy First of all I have to say your work is awesome and has actually been so easy to follow I’m going to try to do the A1U mods you’ve shown. I apologize if I’ve overlooked it here, but can you share any links for the components you used in this mod? Exciters, amps, sound, card, solenoids, etc
How do you use the stock volume control to control the volume? I got the stock power switch working but I'll be damned if I can figure out how to get the volume controller to do it's job
Your mod videos for this machine are awesome. I most definitely want to get one in the future. One question I'd love to know is what your into the machine for with all the mods? Even a ballpark figure would be awesome. I'm in Canada and the pricing would be different but I would be very interested to kmow a general idea as to what it costs to replicate a table like yours . Thank you
Doug, quick question. I am not in any way an electrical engineer nor electronics expert. But, wouldn't there be a voltage drop at the end of the line depending on how many devices you are powering with the 12volt supply without using a voltage regulator making some things not work efficiently?
It would depend on the type of devices one chooses to utilize with the set up. The Arcade1Up solenoids and the SainSmart usb relay were designed with 12v power in mind so they won’t have an issue. In theory I could add 4 more 12v solenoids to this set up and shouldn’t have a big drop in voltage since the solenoids all fire independently of one another in quick succession. If they all fired at the same time then yes, I suspect there would be a voltage drop, but without testing it I wouldn’t know how big or small that number would be. I’m not an electrical expert by any means either. I know enough to be dangerous and had to take some circuit analysis courses in college as part of my media degree for some strange reason. Oddly enough that circuit analysis knowledge I learned is what I use more than anything these days with modding lol.
@@cooltoy Doug, thank you so much for your detailed answer. I loved the part where you said you know enough to be dangerous......I had to laugh because that's exactly what I say about myself. Lol. Thanks again for all your work!
Working on the 1up mod for the 4 solenoids as we speak. Just finished addition the diodes. I am wondering if there are specific terminals to hook specific solenoids up to (in a certain order) I am thinking ahead and maybe the coding expects the left flipper to be solenoid 1, and so on... but not sure how this matches up with the software since I am not there until later today.
Are you running your tables at 4k? Looks like you are. I'm having a heck of a time getting pinup popper to play vpx games at 4k. They play 4k if I play through vpx directly. Play on popper they go back down to 4k. FX3 plays at 4k for me through popper. When you set up baller installer, did you choose 1080 playfield or 4k? I wonder if this is my problem. I just dont want to lose all the work I did on it, so afraid to go back to baller installer. Anyway, thanks for your vids. My 1up is looking pretty badace right now.
@@cooltoy Actually you can take advantage of 4k, if your GPU can handle it, by using DSR 4.00x Resolution in nvidia control panel. AMD might have a similar setting. Then go to your emulators and change screen resolution to 4k. Problem is popper doesnt launch vpx in 4k but I can launch it in 4k in vpx. FX3 does fine. I figured out a workaround in the popper launch scripts but it doesn't load the vpx games seamlessly, does some weird graphical buggy stuff until completely launched. I might try going back and reinstalling popper using the 4k playfield settings but if I remember correctly it made the playfield too big. So not sure now lol Anyway, thats why I asked.
@@cooltoy I figured out how to get vpx in popper to run 4k on the 1up without the force windo thing. If your GPU can handle 4k. I can help you out. The tables look so real in 4k absolutely no pixelization on the wireframes and flippers. looks surreal.
Good morning Doug. I have another question about the exciters. What exactly do you call that connecter that is on the end of the speaker wire connecting to the exciter? Looks like some form of wire connector. If you had a link to that piece also. Thanks brother.
They are called Female Crimp Connectors or Female Wire Terminal connectors. You can find a miscellaneous box of them in any hardware store, Walmart, target, etc. I use them when I’m too lazy to solder my connections
Question for you. I have all the exciters set up for 7.1 via vpx sound options. Not getting any mechanical sounds. Exciters are working because I tested them via Windows 7.1 setup. Do I need to use doflinx with this also to get them to work? Thanks Doug.
Doug I was wondering how many exciters you added? And where you placed them. Also are you using only the stock speakers that came with the cab besides the exciters? Thanks in advance.
added 4 exciters, where I installed them is shown in this video. 2 up front, 2 in the back, Using the stock speakers that came installed in the back box.
Question-how are your running the audio out of the stock speakers in the cabinet? Did you reconnect them with a third amplifier? Leaving them set up as they were, it creates two separate connections on the computer, with the stock speakers running through HDMI audio. How did you resolve that to get all 6 speakers working together?
Hello sir, I just subscribed. Could you please let me know how you set up the pinscape board? I just ordered a Star Wars from Walmart on sale and that is the part I’m worried about. It looks like you installed pins
Hey Doug, Any tips on getting the sainsmart working with VPX? Every time I try to load up TNG, the DOF plugin gives me an error about trying to initialize LEDs. My setup is basically the same as yours, so not sure why it's throwing up that error. Appreciate if you have any thoughts. thx
check your DOF config file, if you find anything in it that refers to the LEDs you can either remove that text or put a # at the beginning of the text and it will turn off that command.
I followed this video and have everything hooked up but can’t seem to get DOFLynx to work with the relay. Any chance you’re going to make a more in-depth tutorial about how you got it going?
Thanks for the reply. I have tried to watch that video but it is very long winded. I like your straight to the point approach. I don’t know how but after I posted, I went upstairs and DOFLynx suddenly worked.
Wow, I like how far you've taken this project. Question: Are you using two Arcade1UP power supplies to power all the accessories? I'm a bit nervous about drilling the additional holes for the nudge buttons, but I will do it. On a slightly bummer note, the backglass monitor was shipped and supposed to arrive this week, but I got a notice from Amazon that it was lost and couldn't get a hold of the seller to see if I can order another one. I'll have to do some research hopefully I can find a monitor that fits.
Yes, I’m using the stock power supply with a splitter to power the scoring LCD and my playfield monitor. Then I’m using a spare 12volt power supply I had lying around (basically the same thing Arcade1Up uses) to power the usb relay/power bricks for my solenoid connections. Sorry to hear about Amazon losing your package. It’s happened to me on more than one occasion before
@@cooltoy 4th attempt I finally got my monitor and I'm at the stage of doing the solenoid mod. I've got the plunger recognized in Windows but its not functioning in game yet. I'm also using the PinUp Baller installet front end.
Man when I get enough money to do all these mods with a pc. One day. For the time being, would I be able to at least connect 4 exciters with 2 amps while using the original a1up pcb? I bought 4 of them for my AFM hoping they give off a decent effect even though there wont be surround sound settings from a pc. Thinking I'd also connect a small subwoofer to the stock speakers too. Besides the exciters amps and splitters etc is there anything else you think i would need to get this to work nicely with the a1up pcb audio input? Thank you!
Hi Doug, Would you be comfortable sharing your DOF /config folder? No matter what I do, I can't get VPX to fire off the solenoids. Works in FX3. I even made sure the plugin was activated with b2s server and did the whole dof config tool thing. Nadda. Thx
@@cooltoy so do you just convert the DVI and display port to HDMI? My display on my Star Wars cabinet just when bad and I’ve been wanting to do a mod so I figure why not go for it.
Can this kind of setup work with Pinball FX3 and/or Pinball Arcade... from Steam? Dumb question, but what is purpose of the solenoids? are those like the exciters in an AtGames pinball machine?
Exciters and solenoids are two completely different forms of haptic feedback. I’ve showed several times in videos you’ve already commented on that I’m running FX3 via steam on this machine, so yes, it’s doable.
@@cooltoy so is it doable with Pinball Arcade also? Can you give a basic definition of what the exciter does, and what the solenoids do....in a pinball game? I did see this mjrnet.org/pinscape/BuildGuideV2/BuildGuide.php?sid=contactors ... "reproducing that tactile solenoid effect in a virtual cab " The most effective way to reproduce the sensory effects of a pinball solenoid is to use some of kind of solenoid. In a real pinball machine, they have to use a specific mechanism for each job, because each mechanism has to do the actual work of propelling the ball (or whatever it's meant to do). In a virtual cab, we don't have that constraint. Our devices don't have to actually do anything physical in the game; they just have to produce the right sensory impression
@@cooltoy Terse. Concise. I appreciate that. :) But.. could you tell me/us who are new to the digital pinball universe where and how to get these non-Pinball FX tables? Thanks.
Awesome! But there is no such thing as a Ground or Positive wire... The ports decide which is what, color coding is just for at a glance notification and for ease of installation in maintaining continum.
Correct, I’m just simplifying the concept for the audience who may not already know these things. I try to speak in concepts as to make the principles of why we do things easier to understand and easier to translate to other types of projects without being insulting to someone’s intelligence.
@@cooltoy Ahh ok... But to make myself clear I wasn't in anyway knocking you or your video.. I say that in case I may have caused and sort of negative perception or response from you... And I am going above and beyond to apologize because I do appreciate You, Your Content and the level of Quality it's in. ✌️
For anyone wondering the same thing, I had to move the control board off the cabinet floor and onto to a 1.5 inch foam cushion. Now it all works normally without lowering the g-meter sensitivity.
This is the stock monitor running 1080p. The only thing preventing the stock arcade1up games from running at 1080p was their pcb being hard coded to only output 720p.
Could you please tell me how you got the screen portion to "lift up" ? I removed my plexi, metal rails etc but I just cant lift it up to get to the under screen area? Do i need to remove something else or hold a lever? ( i have the marvel)
I’m using the stock speakers. I have them connected to that usb sound card I showed. I just used a 3.5mm extension cable to make the stock speaker cable reach down to my usb sound card
@@cooltoy sweet! Do a direct comparison to the Atgames Pinball and if you can did you pod that for a bigger back glass? Thanks bro hope the family is doing well
I don't understand why you are nodding the A1up because you might as well just built your own. The ALP is where the real modding is at. By the way with FX3 the plunger does work out of the box so don't use joy2key.
I want to add that with these Arcade !up tables currently going for under $500 US it enables me to get a pretty sweet Vpinball setup on a budget. I am grateful for @COOLTOY doing these video tutorials.
I just finished adding the solenoids with your help, the diagram was great with the links! Working on the Doflinx config tonight. I've added extra buttons and will be upgrading the play field to 32" and will end with Baller Installer. Thanks for all the help!!
What other mods or things would you like me to cover on this Arcade1Up Pinball Mod project? Let me know in the comments below!
Great video and very helpful! Do you have any plans to hook up an LEDWIZ and get led lights/toys working in your setup?
Awesome video!! Your play field looks better/sharper...Dis you upgrade it? If so what display did you use? As I am looking to change mine to something a little better.
What about adding Kinect + BAM ?
Requesting some more live chat with a little longer game play on Jurassic park and T2 tables please! Or even a quick video
I guess im asking the wrong place but does someone know of a tool to log back into an Instagram account..?
I was dumb lost the account password. I would love any help you can offer me
Dude! You are awesome! I can’t believe what I’m seeing and I’m totally going to give this a try. Very nice! Thank you so much!
Glad you like it 👍
I know it's been years since this video was put out, but I just wanted to say thank you @cooltoy for leading me down the modding TH-cam rabbit hole. Just finished my arcade 1up mod and through your channel I have made a beast of a pinball machine. Again thank you so much for this channel.
Glad I could help 👍
I would very much be interested in the longer tutorial videos. Maybe after you make the short versions you can create the long version as well?
Thanks for the feedback. I’ll try to circle back with more details or a livestream workshop that’s longer. I just always get self conscious about regurgitating info that others have done in similar videos.
@@cooltoy I see what you mean. However, I think in this case it be great to have everything in one video. I looked at the videos you provided and not to be mean, but you explain things better, lol. Thanks for all the great videos you do! I can't wait for the software set up video, once that's up I'll begin my journey into modding my cabinet.
longer videos would be absolutely fine. I would never worry about that. There is never too much information when doing more complex things.
@@cooltoy I agree with browncoat. The cooltoy version, I presume, would be be a better explanation and shot and edited better as well.
This.is.awesome. Was waiting for this video! :)
Glad you liked it 👍
I’m about $150 away from completing this setup to my DIY pinball. Thank you for showing your setup.
Happy it helped 👍
Epic Ghost Beach shirt. Gave me Goosebumps
Never cease to impress my friend.
Thank you kindly
Let a longer video roll for mods like this. This will be a reference for people doing these mods. Even if it is soldering the diode. Easier to follow one video than hitting multiple ones.
To be honest, I'd probably watch a video of you describing paint drying.
I’m was contemplating doing a “workshop” type of livestream in the future to possibly go over and show more of the nitty gritty details on both the pc side as well as demoing the wiring. It’s just hard to know how much demand for this type of thing there will be and how many people will want or need that info.
@@cooltoy You went over everything very well, but like me and I am sure others, it would be great to see a workshop video to do a little more "hand holding" for people not used to messing with wiring etc. I think your video would be THE definitive video to follow along to create an awesome modded a1up pinball, sort of like how ETA prime has 1 mill+ hits on his 1up cabinet mod.
Awwww that Mario Pinball at the intro was so sick, awesome stuff as usual!
It’s a very fun game to play
You had me at 3D spacial audio! Very nice
It’s a very cool experience to hear things from the back of the table, and then the sound move forward toward me. Obviously it would be even greater if the machine was longer as the sound would travel more, but I enjoy the smaller footprint of this machine in my house vs a full scale pinball unit
nice work Doug!! And thanks for the shout out, lol, I probably didn't give the best "how-to" but definitely showed what NOT to do with the Diodes. i haven't done SSF yet great to see ur setup. curious to look at ur DOFlinx file too. thanks!
Anytime man
Wow. Great job on that. The wiring doesn't look too difficult after you understand what goes where. Software I'm guessing isn't that bad either. Will attempt this once I get bored with stock tables. Thanks!
Software isn’t too bad, it’s like the wiring it looks scary until you understand the concepts and understand how things are labeled.
cooltoy, you the man. I need to do something similar for legends to make sure it sounds great and gets all the tables
Yet another fine video @CoolToy, you definitely have the knack for this.
One note, I don't think a 30 minute video is an issue. If you're really worried about it put links in the description to jump to select parts.
Thanks for the Mod tips and specific vid!! I'm installing solenoids now.
Great work! I did a pinball mod with FX3. Going to add the SSF. A simple video on adding some other tables, VPX or virtual pinball would be great. Terry Redd does great stuff but it’s not COOLTOY!!
Thank you Doug! - I was waiting for this video, and it was awesome. I really want to add haptics to my vpin, and you and BeeKong are making me feel like I CAN actually do it now. The vpin was such a daunting build, that I gave up on haptics when I built it. Now I can finally plan it out and add it.
BTW - the sound does translate in the video, I'm sure it is more impressive in person, but I definitely could tell the difference.
I would
Literally pay up to $2500 for that PF table you have... totally awesome.
I have been waiting to see how this turned out. This looks amazing. Please do more in-depth videos on the pc setup. It also would be really cool for you and Kongs-R-Us to do a live stream together.
oh man... so looking forward to starting this project.
Great explanation of the wiring!
Thanks, it’s always hard to gauge how much is too much information and how much isn’t enough sometimes since I never really know who the audience will be
Watching this video reminded me I need to re pin the board connectors on my Simpsons Pinball Party...lol
Great tutorial! You’ve convinced me to mod my Marvel 1up. I’m doing the full deal, perhaps overkill as I intend on adding a shaker and gear motor.
So far I’ve added the 22” back glass monitor, expanded my DMD with a 3d print overlay, installed 4 transducers, and an 8” sub. Working on de-casing a 32” LG IPS 2k 180hz monitor. I’ve added 6 additional buttons as well.
The part I need to figure out is programming my KL25z board. I have a zero delay controller board as well which is pretty straightforward. Any pointers on the kl25z would be appreciated.
Very cool videos - definitely interested in how to tie the tables into a slick front end to "hide" the pc aspects as much as possible! Also an overview of the tables like, are these FX3 only or do you have others included...that's where things get confusing for me, Visual Pinball, PinMame, VPX. I know that's a lot to cover but "bite size" videos on how to add or incorporate would be cool too. Thanks!
Awesome! Well done! Looking forward to your baller installer video. I installed on my vpin and can't figure out how to exit out of an fx3 table back to the pinup popper menu. Hope you can go over that in your video!
Nicely done! Just a slight difference in sound jk. The fact that there is that big of a difference on my phone, I'm sure in person the sound/feel is drastic.
It’s a night and day improvement!
Thank you for this!!!
You’re welcome 👍
I see you used my selenoid link resolution I posted in your last video ;) That guy is the only one in history to figure it out before you
I'm noticing that the external sound card you are using has a volume setting. Do you need the separate amps? If you were to connect the exciters to the USB sound card directly (soldering speaker wire to 3.5mm adapters) does the USB sound card have enough power to drive the exciters?
Really awesome video! Thanks for sharing... I'd love to see a tutorial on siderail addressable LEDs////
I gave this machine away a long time ago, sorry
Really appreciate your take on the mods you have done! Especially on the arcade 1-up pinball tables. Personally have utilized some of these mods myself. Keep up the awesome work and looking forward to your next mod. How can we improve the the tilt feature?
Incredible, COOLTOY! Awesome job! Can you go over PC Specs needed to run all these tables in a future video or reply here? Thanks as always!
this is the recommended PC specs Zen suggests for FX3. Visual Pinball is much of the same assuming you don't wish to run higher resolution screens such as 4k.
OS: Windows 10
Processor: Intel i5-4590 or AMD equivalent
Memory: 8 GB RAM
Graphics: NVIDIA GTX 970 / AMD 290X
@@cooltoy Thanks COOLTOY, my intention is to have a dedicated plug and play gaming pc primarily for OTG with Legends Pinball so I don't need more than 1080p. Just got mine last Tuesday so still haven't even scratched the surface with the built-in Gottlieb and Zaccaria packs to keep me busy for now. Thanks for the reply, I greatly appreciate it!
Thanks for the vid. I've been meaning to do the exciter (and solenoid) mod ever since I saw your video 2 years ago. Now that I've wired everything up, I'm having a heck of a time getting the SSF to work. I'm wondering if I need an amp for the back box original speaker b/c I can't hear them when I test the 7.1 configuration. And I have no idea how to get doflinks started for FX3, despite having watched the video in the description.
Thanks for a great mod, just finished installing solenoids and configuring the ini's and more with the DOFL config tool and following your files. Does FX3 animated back glass work on Pinball Popper? Thanks!
yes, you'll need to set up the animated backglass feature with DOF as well though
@@cooltoy Thanks again! About to order the 32" screen and tempered glass
Looks Great CoolToy. I wouldnt be able to do that. you must be playing the Visual Pinball X tables. I would like to get a AtGames or Arcade1Up machine. but will wait it out to see if both companies come out with some upgrades. they can do alot better with their machine. I would like to see a bigger dmd screen like some of the new stern pinballs. it's a 15.6" screen. and bigger playfield screen.. they should come out with differnt models with differnt price points. I would spend more for one
I'm also hoping that either company releases a "pro" version of their machine with more upgrades and features.
Man I wish I was smarter with all this. I’d love to do it. Hoping Arcade1up makes gen 2 of their pinball machines with WiFi access and the ability to just buy all the zen tables.
It really baffles me that they didn’t do that out of the gate.
It's because they want to sell more cabinets, that is their business model.
@@adonisminus20 yeah but they aren’t going to make another Star Wars or marvel one so why not load them up.
@@Jpansta You watch, I can see them releasing the super duper limited elite etc. editions with tables they didn't include in these initial versions.
@@Jpansta Remember this is the same company that has released a dozen different Pacman cabs.
Doug I'd love a workshop livestream where you can go into full details for everything step by step. Your project looks amazing so far! Where did you get the Mario Backglass?
That's a monitor
Thanks again for this tutorial!
2 Questions:
1) What type of wires did you use to connect to the diodes, and from the terminal board to the sainsmart? Would standard button wires work for that?
2) Are you using the default power plug that came with the A1U pinball or from another A1U cab? Do you recall the specs on it (12v 3a I think?)
Thx
Any pointers on get DOF to recognize the SainSmart? I have everything installed (hardware and software) DOFLinx log states that there are no output devices found. Did you run into anything similar? Thanks and keep producing your great content!
Really slick work here. I like how you used the common-rail approach to wire up all the power. It's just like I see in the bottom of my actual Gottlieb System 80 machine.
The electrical tape made me shudder a bit but if it works that's all you need.
Are you going to tidy up all the amps hanging off the back and install those inside at some point?
I soldered and crimped my diode connections and then put electrical tape over it all as an overkill precaution. Don’t worry it wasn’t just taped together, and yes I’ll be cleaning up the back end wiring as well. I left it all on the outside so I could easily show the connections in this video
Would a base shaker be overkill for this setup? Your cab looks and sounds amazing. Thanks for the video.
Have you tried to use external computer speakers with the stock setup? I’m trying to use the cheap Logitech system everyone uses for arcade 1up stuff but getting choppy feedback whether I use a spitter and use the stock speakers with the logi sub or use all the logi speakers
I set my cabinet exactly like yours 32” screen and all. Thought I saw your dfconfig file before but don’t see it now. Wondering if you would be willing to share. Been tweaking mine but can’t seem to get the plunger and nudge to work as well as I would like. SSF is awesome.
@cooltoy First of all I have to say your work is awesome and has actually been so easy to follow I’m going to try to do the A1U mods you’ve shown. I apologize if I’ve overlooked it here, but can you share any links for the components you used in this mod? Exciters, amps, sound, card, solenoids, etc
Again, apologies if I overlooked it.
links to all the components I've used are in the video description box
Thanks. I appreciate the reply.
How do you use the stock volume control to control the volume? I got the stock power switch working but I'll be damned if I can figure out how to get the volume controller to do it's job
Your mod videos for this machine are awesome. I most definitely want to get one in the future. One question I'd love to know is what your into the machine for with all the mods? Even a ballpark figure would be awesome. I'm in Canada and the pricing would be different but I would be very interested to kmow a general idea as to what it costs to replicate a table like yours . Thank you
Any idea what could cause my relay board to disconnect all the time while the relays are firing? Have used the diodes as shown. Thanks
Doug, quick question. I am not in any way an electrical engineer nor electronics expert. But, wouldn't there be a voltage drop at the end of the line depending on how many devices you are powering with the 12volt supply without using a voltage regulator making some things not work efficiently?
It would depend on the type of devices one chooses to utilize with the set up. The Arcade1Up solenoids and the SainSmart usb relay were designed with 12v power in mind so they won’t have an issue. In theory I could add 4 more 12v solenoids to this set up and shouldn’t have a big drop in voltage since the solenoids all fire independently of one another in quick succession. If they all fired at the same time then yes, I suspect there would be a voltage drop, but without testing it I wouldn’t know how big or small that number would be.
I’m not an electrical expert by any means either. I know enough to be dangerous and had to take some circuit analysis courses in college as part of my media degree for some strange reason. Oddly enough that circuit analysis knowledge I learned is what I use more than anything these days with modding lol.
@@cooltoy Doug, thank you so much for your detailed answer. I loved the part where you said you know enough to be dangerous......I had to laugh because that's exactly what I say about myself. Lol. Thanks again for all your work!
Working on the 1up mod for the 4 solenoids as we speak. Just finished addition the diodes. I am wondering if there are specific terminals to hook specific solenoids up to (in a certain order) I am thinking ahead and maybe the coding expects the left flipper to be solenoid 1, and so on... but not sure how this matches up with the software since I am not there until later today.
Are you running your tables at 4k? Looks like you are. I'm having a heck of a time getting pinup popper to play vpx games at 4k. They play 4k if I play through vpx directly. Play on popper they go back down to 4k. FX3 plays at 4k for me through popper. When you set up baller installer, did you choose 1080 playfield or 4k? I wonder if this is my problem. I just dont want to lose all the work I did on it, so afraid to go back to baller installer. Anyway, thanks for your vids. My 1up is looking pretty badace right now.
nope, just running them at 1080p as that is all that the stock Arcade1Up monitor is capable of.
@@cooltoy Actually you can take advantage of 4k, if your GPU can handle it, by using DSR 4.00x Resolution in nvidia control panel. AMD might have a similar setting. Then go to your emulators and change screen resolution to 4k. Problem is popper doesnt launch vpx in 4k but I can launch it in 4k in vpx. FX3 does fine. I figured out a workaround in the popper launch scripts but it doesn't load the vpx games seamlessly, does some weird graphical buggy stuff until completely launched. I might try going back and reinstalling popper using the 4k playfield settings but if I remember correctly it made the playfield too big. So not sure now lol Anyway, thats why I asked.
@@cooltoy I figured out how to get vpx in popper to run 4k on the 1up without the force windo thing. If your GPU can handle 4k. I can help you out. The tables look so real in 4k absolutely no pixelization on the wireframes and flippers. looks surreal.
Good morning Doug. I have another question about the exciters. What exactly do you call that connecter that is on the end of the speaker wire connecting to the exciter? Looks like some form of wire connector. If you had a link to that piece also. Thanks brother.
They are called Female Crimp Connectors or Female Wire Terminal connectors. You can find a miscellaneous box of them in any hardware store, Walmart, target, etc.
I use them when I’m too lazy to solder my connections
@@cooltoy awesome. Thanks Doug
Question for you. I have all the exciters set up for 7.1 via vpx sound options. Not getting any mechanical sounds. Exciters are working because I tested them via Windows 7.1 setup. Do I need to use doflinx with this also to get them to work? Thanks Doug.
Doug I was wondering how many exciters you added? And where you placed them. Also are you using only the stock speakers that came with the cab besides the exciters? Thanks in advance.
added 4 exciters, where I installed them is shown in this video. 2 up front, 2 in the back, Using the stock speakers that came installed in the back box.
@@cooltoy thanks Doug. Have a good weekend brother.
Question-how are your running the audio out of the stock speakers in the cabinet? Did you reconnect them with a third amplifier? Leaving them set up as they were, it creates two separate connections on the computer, with the stock speakers running through HDMI audio. How did you resolve that to get all 6 speakers working together?
stock speakers are connected to the USB sound card via an extended 3.5mm audio cable in the 2.1 channel port.
@@cooltoy Thanks!
Hello sir, I just subscribed. Could you please let me know how you set up the pinscape board? I just ordered a Star Wars from Walmart on sale and that is the part I’m worried about. It looks like you installed pins
Hey Doug,
Any tips on getting the sainsmart working with VPX? Every time I try to load up TNG, the DOF plugin gives me an error about trying to initialize LEDs. My setup is basically the same as yours, so not sure why it's throwing up that error. Appreciate if you have any thoughts. thx
check your DOF config file, if you find anything in it that refers to the LEDs you can either remove that text or put a # at the beginning of the text and it will turn off that command.
I like it.
Thank you!
Hey doug, do you know when the Mars attacks pinball table will be available?
I followed this video and have everything hooked up but can’t seem to get DOFLynx to work with the relay. Any chance you’re going to make a more in-depth tutorial about how you got it going?
did you use the DOF Config tool for creating you file to communicate to the relay? th-cam.com/video/y3DdNzrrmQ8/w-d-xo.html
Thanks for the reply. I have tried to watch that video but it is very long winded. I like your straight to the point approach. I don’t know how but after I posted, I went upstairs and DOFLynx suddenly worked.
Wow, I like how far you've taken this project. Question: Are you using two Arcade1UP power supplies to power all the accessories? I'm a bit nervous about drilling the additional holes for the nudge buttons, but I will do it. On a slightly bummer note, the backglass monitor was shipped and supposed to arrive this week, but I got a notice from Amazon that it was lost and couldn't get a hold of the seller to see if I can order another one. I'll have to do some research hopefully I can find a monitor that fits.
Yes, I’m using the stock power supply with a splitter to power the scoring LCD and my playfield monitor. Then I’m using a spare 12volt power supply I had lying around (basically the same thing Arcade1Up uses) to power the usb relay/power bricks for my solenoid connections.
Sorry to hear about Amazon losing your package. It’s happened to me on more than one occasion before
@@cooltoy 4th attempt I finally got my monitor and I'm at the stage of doing the solenoid mod. I've got the plunger recognized in Windows but its not functioning in game yet. I'm also using the PinUp Baller installet front end.
Man when I get enough money to do all these mods with a pc. One day. For the time being, would I be able to at least connect 4 exciters with 2 amps while using the original a1up pcb?
I bought 4 of them for my AFM hoping they give off a decent effect even though there wont be surround sound settings from a pc. Thinking I'd also connect a small subwoofer to the stock speakers too. Besides the exciters amps and splitters etc is there anything else you think i would need to get this to work nicely with the a1up pcb audio input? Thank you!
Very cool! Looks like fun to try :) Looks like some custom art on the sides of the cabinet - did you get this printed somewhere?
Nope, it’s the stock Arcade1Up art
Hi Doug,
Would you be comfortable sharing your DOF /config folder? No matter what I do, I can't get VPX to fire off the solenoids. Works in FX3. I even made sure the plugin was activated with b2s server and did the whole dof config tool thing. Nadda.
Thx
sure thing, send me a DM on facebook or email me so I can send you my folder
Can you recommend a computer to use? Thanks! Love the videos.
This is what I used. PC: amzn.to/38RoEAu
Graphic Card: amzn.to/3GQcbJZ
@@cooltoy so do you just convert the DVI and display port to HDMI? My display on my Star Wars cabinet just when bad and I’ve been wanting to do a mod so I figure why not go for it.
Can this kind of setup work with Pinball FX3 and/or Pinball Arcade... from Steam? Dumb question, but what is purpose of the solenoids? are those like the exciters in an AtGames pinball machine?
Exciters and solenoids are two completely different forms of haptic feedback. I’ve showed several times in videos you’ve already commented on that I’m running FX3 via steam on this machine, so yes, it’s doable.
@@cooltoy so is it doable with Pinball Arcade also? Can you give a basic definition of what the exciter does, and what the solenoids do....in a pinball game? I did see this
mjrnet.org/pinscape/BuildGuideV2/BuildGuide.php?sid=contactors ... "reproducing that tactile solenoid effect in a virtual cab "
The most effective way to reproduce the sensory effects of a pinball solenoid is to use some of kind of solenoid.
In a real pinball machine, they have to use a specific mechanism for each job, because each mechanism has to do the actual work of propelling the ball (or whatever it's meant to do). In a virtual cab, we don't have that constraint. Our devices don't have to actually do anything physical in the game; they just have to produce the right sensory impression
Are all the tables shown in the video from Pinball FX3?
No
@@cooltoy Terse. Concise. I appreciate that. :) But.. could you tell me/us who are new to the digital pinball universe where and how to get these non-Pinball FX tables? Thanks.
This is no longer an Arcade1Up machine. Lol
I got one coming, not even gonna plug it in until I stripped it and did this stuff to it. hahaha
I want to learn how you get a lot of pinball tables
Add a PC first and foremost
Awesome! But there is no such thing as a Ground or Positive wire... The ports decide which is what, color coding is just for at a glance notification and for ease of installation in maintaining continum.
Correct, I’m just simplifying the concept for the audience who may not already know these things. I try to speak in concepts as to make the principles of why we do things easier to understand and easier to translate to other types of projects without being insulting to someone’s intelligence.
@@cooltoy
Ahh ok... But to make myself clear I wasn't in anyway knocking you or your video.. I say that in case I may have caused and sort of negative perception or response from you... And I am going above and beyond to apologize because I do appreciate You, Your Content and the level of Quality it's in. ✌️
@@cMARVEL360 no worries I didn’t take your comment negatively at all.
Hey Bud ,,,Whats the easiest way to install Pinup Popper Baller install im going to the link but having a hell of a time installing it
I was able to get DOFLinx working but my two bumper solenoids are setting off my nudge function. Any Ideas?
For anyone wondering the same thing, I had to move the control board off the cabinet floor and onto to a 1.5 inch foam cushion. Now it all works normally without lowering the g-meter sensitivity.
I know you did the 32” then went back to stock size. This is running 1080p isn’t it? Did you swap it with another 24” monitor?
This is the stock monitor running 1080p. The only thing preventing the stock arcade1up games from running at 1080p was their pcb being hard coded to only output 720p.
@@cooltoy I have a lvds to hdmi adaptor board coming today in the mail. That all I need for it?
Could you please tell me how you got the screen portion to "lift up" ? I
removed my plexi, metal rails etc but I just cant lift it up to get to
the under screen area? Do i need to remove something else or hold a
lever? ( i have the marvel)
There are 4 screws that hold the mounting bracket down that you need to remove to be able to lift the monitor up
did you/will you explain the software used to make all this work together? If so, I will watch that video too.
Fx3 via steam, and visual pinball x are the two programs that are running, and then I’m using the front end Pinup Popper by Nailbuster
@@cooltoy thxs for info. How does Pinball FX3 know how to use/when to engage the solenoids and fire off the sounds in your surround sound system?
if you are using the arcade1up power supply for this, how do you power the dmd? trying to figure that part out, thanks
using a Y splitter cable
@@cooltoy thank you!
How are the main pinball speakers hooked up? And are the stock?
I’m using the stock speakers. I have them connected to that usb sound card I showed. I just used a 3.5mm extension cable to make the stock speaker cable reach down to my usb sound card
My soldering skills are terrible, would crimps get the job done?
Yes, though not ideal. Crimp or twist on connectors would also work as a substitute
Yea bro how you hooked back glass up and what you used
I went over that in my Part 2 video already posted on the channel
@@cooltoy sweet! Do a direct comparison to the Atgames Pinball and if you can did you pod that for a bigger back glass? Thanks bro hope the family is doing well
I don't understand why you are nodding the A1up because you might as well just built your own. The ALP is where the real modding is at. By the way with FX3 the plunger does work out of the box so don't use joy2key.
I’ve already explained why I’m doing this in detail in other videos. I also already have shown how to mod the ALP.
I want to add that with these Arcade !up tables currently going for under $500 US it enables me to get a pretty sweet Vpinball setup on a budget. I am grateful for @COOLTOY doing these video tutorials.
Can you still play hot seat/multiplayer on FX3 games with Baller Installer?
Baller installer is just a visual front end, all the same features of fx3 are still accessible
@@cooltoy Great to hear, thanks for the tips!!
I just finished adding the solenoids with your help, the diagram was great with the links! Working on the Doflinx config tonight. I've added extra buttons and will be upgrading the play field to 32" and will end with Baller Installer. Thanks for all the help!!
What is the Zedboard for ?
The board he has controls nudge and acts as the button encoder. Check out the part 2 mod video.
@@MrEd20901 thanks ed. Do you have to use a zedboard? it just looked like a really complex encoder. Is it the only type that has nudge?
If you don't care about analog nudging then you can use just about any encoder you wish.