How to upgrade your bike. Replacing the drivetrain of a bicycle
ฝัง
- เผยแพร่เมื่อ 15 พ.ค. 2024
- Hello all cyclists. This video tutorial is about how to upgrade your favorite bike.
A cool bike was brought to our bicycle workshop. The owner loves his bike very much. He wanted to update the bicycle drivetrain.
The bicycle drivetrain will be replaced with a similar one.
I'll show you how to change the chain, cassette, bike cranks and cable on a bicycle.
At the end of the video, the bike will be like new! The owner of the bike was satisfied!)
00:00 Upgrade your favorite bike.
00:30 Why my bike became faulty.
00:46 How to remove the rear derailleur of a bicycle.
01:02 How to replace a bicycle cassette.
01:59 How to replace bike cranks.
05:17 How to lubricate the front derailleur of a bicycle.
06:19 How to install a bicycle rear derailleur.
06:45 How to quickly install a new chain on a bicycle.
07:01 How to replace the gear shift cable on a bicycle.
08:32 Bicycle rear derailleur setting.
10:43 Testing bicycle gear shifts.
If you liked my videos ❤️,
support the channel financially 💰🙏.
Use the "Membership" / "Sponsor" function on TH-cam ✊😘 - วิทยาศาสตร์และเทคโนโลยี
Again, an excellent video. Concise and straight forward to the point. You show the correct tools for doing the job. Thanks and look forward to next video.
glad to be of service! thanks for your feedback 😘
Aaaaaand the cat is back 😊😊😄😉 thank you for the vid!
Kitty says hello to you😻
The cat is the boss. 👍 😊
superb video si bine facut si service sat
Grazie per il tuo commento! 😍
se ti è piaciuto questo video,
condividi questo video con i tuoi amici ❤️
aiuterà lo sviluppo del canale! 📈
good job
Thank you for your feedback! 😘
Nice vid my guy. Got the grease you use and i can see why you like it. Sticks to bearings quite nicely and is eaay to apply with a srynge. I only have one question. Since im unfortunate to still have cup and cone bottom bracket, idk how much i should apply. Im worried if i put too much and its just a waste of grease or if i put too little if dust will get into the bearings. Please i really want help with that. It could also make for a good vid ig.
Thank you for your comment and watching. I think you need to apply grease about the same amount as in a hub with cones and balls, a medium amount. If the frame allows it, it's better to replace it with a closed cartridge type bottom bracket and not suffer in the future.
ça a l'air trop facile... je ne suis pas doué niveau mécanique et encore moins patient...
merci pour les vidéos que tu nos proposes.
continue stp !!! 🚴 🦾
Merci pour votre commentaire ! 😍
si vous avez aimé cette vidéo,
partagez cette vidéo avec vos amis ❤️
cela aidera au développement de la chaîne ! 📈
Please someone help me.. I have 28 hole 9 speed HG hub and now I want to use 7 speed 14t - 34t freewheel instead of HG cassette... So how it possible without changing the hub? Or should I change the hub to normal single speed hub ... Is the freewheel compatible with SRAM XD driver... ?
You can't put a freewheel on a HD hub, and you can't put a single-speed hub on a freewheel either. You can find a 7-speed cassette and put it with a spacer ring on your freehub. Sram's XD freehub is smaller in diameter, it's designed for a 12-speed cassette, also by Sram
@@NiceBikeService thank you so much for replying.... Actually it's because I wanted to try Shimano mega Range with 2/3 x 7 speed setup...
Mantep 👍
😺
Que vídeo top
¡Gracias por tu comentario! 😍
si te ha gustado este video
comparte este video con tus amigos ❤️
¡ayudará al desarrollo del canal! 📈
Excelente serviço. E sempre espero pelo gato ajudante 🐈😻
Muito obrigado. A Kitty envia-lhe o seu amor😺
👍👍
🐱
Лайк за котика.
😺
Frist comment bro 🥰❤️
😘❤️❤️❤️💨🚴♂️
🚴👍👍👍
👍😽👋
А для чого шатуни міняли? Вони ж однакові
новий ланцюг вже міг не зайти, а кліент дуже захотів все оновити.
гроші на кишеню тиснули 😁
change the pedals man ^^
8:11 why is the crank dirty? You switched it before 🤔
These are the wonders of video editing😉