I know how hard I struggled back in 2020 when I started learning to do cosmetic mocks & this thread made me go nuts. Not a single tutorial I found was helpful at that time. I am glad you uploaded this so that the people who starting to learn blender today will find it extremely helpful.
@@WenboZhao You have amazing content. I just turned notifications for your chancel & will recommend to others also. You covered so many topics none of the other TH-camrs from blender community covered. Thanks a lot hope your channel grows. :)
Nice work mate. Clear and concise. Around the 4:10 mark, instead of manually going around selecting each face around the screw, you can go to face mode on edit mode (3 on the keyboard) and click while holding alt on a vertical edge between the loopcuts you created before. This will automatically select each connected face around the screw. But yes, nice one!
Dear Wenbo, Thanks a lot for your perfect tutorial! I'm a complete beginner in Blender and I was trying to create a lamp which I used your tutorial for the screw part. I'm gonna dig into your channel and watch as much tutorials as I can! Thanks again!
Thank you for this I needed this ♥, one thing, at 4:40 when you scale up after pressing "S" to scale like that you have to press Shift + Z to mute /stop scaling along the Z axis because the first screw and third one if you see them at 4:49 they are deformed up and down too much (check both sides).
A really easy way to get screw shapes is a default add-on called "Bolt Factory" with lets you make nearly any screw. After sizing it you can use the Boolean modifier and apply the screw shape another object, then you have an object with a screw feature
Thanks for the video! I like to learn numerous ways to model the same thing and this was an interesting way to achieve this shape. I do believe that if you add a weld modifier and then apply screw and weld that should remove the issue of the overlapping vertices as merging by distance after doing so resulted in 0 vertices merged. Hope this may help.
Love your work! Can you also show how you did the other parts of the model (the lid and the container) please? Beginner here and want to learn aggressively! Thanks!
Amazing and awsome tutorial . one of the best channel thanks sharing for sharing. But I faced a problem when I want to insert the first face i hitted I then B but it doesnt give me the same result you have done kindly what can I do please??
at 7:09, When I push I to insert and then B for the boundry, my boundry box is positioned at the top insead of the side like yours. How do i switch it?
Hello ! I really love your chanel ! Many clever and usefull tips ! And it's very valuable to see someone speaking about lighting in Blender, who actually have a knowledge about lighting in the real world as a photograoher. Thanks a lot for sharing !
nice i like this approach because unless im in a hurry with pressured deadlines, I prefer to roll the sleeves up and get into modeling and try out ideas, experiement and find and discover techniques and approaches. So this tutorial was great to see thanks for putting it together!
i saw another tutorial , he did with another method... but that method was to remember but you presented a conceptual way of doing it and is best.... thanks
I know how hard I struggled back in 2020 when I started learning to do cosmetic mocks & this thread made me go nuts. Not a single tutorial I found was helpful at that time. I am glad you uploaded this so that the people who starting to learn blender today will find it extremely helpful.
Glad to see you here mate🤓 more useful tutorials coming up, stay tuned 💪
@@WenboZhao You have amazing content. I just turned notifications for your chancel & will recommend to others also. You covered so many topics none of the other TH-camrs from blender community covered. Thanks a lot hope your channel grows. :)
Nice work mate. Clear and concise. Around the 4:10 mark, instead of manually going around selecting each face around the screw, you can go to face mode on edit mode (3 on the keyboard) and click while holding alt on a vertical edge between the loopcuts you created before. This will automatically select each connected face around the screw. But yes, nice one!
Great tip mate! Thanks a lot!
You just made my life so easier, i was stressing about the skrew part of the product model for 2 days straight untill i found this video. Thanks man
Dear Wenbo, Thanks a lot for your perfect tutorial! I'm a complete beginner in Blender and I was trying to create a lamp which I used your tutorial for the screw part. I'm gonna dig into your channel and watch as much tutorials as I can! Thanks again!
Welcome here my friend 🥰
Thank you for talking slow and going step by step with us. The pros forget that this is all new to us and typically go super fast….
I'm new to blender, I'm coming over from 3DS Max. This was easy to follow. Thanks for explaining this whole process clearly. Great tutorial!
You’re welcome mate🤓
Tutorial came in clutch! Thanks for sharing.
u the goat of blender tutorials
Haha thanks a lot mate
brilliant tutorial
Thanks buddy 🤓
you have best detailed tutorials! You earned a subscriber 😍
thank you 😁
Thank you for this I needed this ♥, one thing, at 4:40 when you scale up after pressing "S" to scale like that you have to press Shift + Z to mute /stop scaling along the Z axis because the first screw and third one if you see them at 4:49 they are deformed up and down too much (check both sides).
Thanks for noticing
Thank you so much! 🙏 Now we can save it to assets and use forever 😄
exactly🤓
Thank you! This was the only tutorial that made sense to me.
You’re welcome ☺️
Amazing! Finally! Great tutorial and great channel
Thank you 😊
Thanks...Very helpful content
Very clever way of resolving that shape and great explanation of how to make it with correct topology!
Thank you buddy 🥰
Awesome.. really wanted to learn how to do it. Thank you very much Zhao 🙏
No problem mate, happy to help 🥰
i really like your channel there is nothing like your video
thanks a lot mate🥰
This really helped me a lot.
thank you countless times.
You’re so welcome mate 🤓
C’est le meilleur tutoriel pour ce type de forme
Thank You:)
This is gold !! Thanks Bro !!
You’re so welcome
As always Wenbo, very useful and helpful! Thanks!
Thanks Jojo
love this tutorial bro, love you
thanks mate🤓
Thanks for always great tips!
Thank you ! Your methods helped me a lot, In fact these are handy when dealing with spirals in general!
Great tutorial mate, cheers
Thanks mate 🤓
yeah youre clearly right that why i am watching this tutorial
lol🤓 i got you 😉
A really easy way to get screw shapes is a default add-on called "Bolt Factory" with lets you make nearly any screw. After sizing it you can use the Boolean modifier and apply the screw shape another object, then you have an object with a screw feature
Great tip！ thanks for sharing！
NIIIIIIIIIIIIIIIIIIIIIICE!
Thank you so much!
Keep going with tutorials about that!
Thank you for your support
extremely useful! thank you!
You’re so welcome 😉
best tutorial for this!
Glad it was helpful!
Thanks for sharing this knowledge!
You’re welcome ☺️
WOW!!! very helpful video!!!
subscribed! Thx!!!
Amazing work man thank you
Thank your support mate🥰
Thanks for the video! I like to learn numerous ways to model the same thing and this was an interesting way to achieve this shape. I do believe that if you add a weld modifier and then apply screw and weld that should remove the issue of the overlapping vertices as merging by distance after doing so resulted in 0 vertices merged. Hope this may help.
Great thinking my friend, all roads lead to Rome, thank you for sharing this, I will try it myself🥰
Very very good!!
Thanks 😊
the best video...congrats.
Thanks mate🤓
Thank you, this is a great solution!
You’re welcome ☺️
i am learning topology from you.... from 1 year i am trying but fianlly i get the channel to learn topology
Earned my subscription
💪
Thank you! It's helped me a lot 🙏🙏🙏
you are so welcome😁
Thanks a lot, really nice video !
You’re welcome mate
Love your work! Can you also show how you did the other parts of the model (the lid and the container) please? Beginner here and want to learn aggressively! Thanks!
Check out my case study videos on TH-cam, you will know how to do it
You explained this very well.
thank you mate
Very helpful bro, make of like these thanks ❤❤
thanks mate
Very useful tutorial. Thanks
thank you mate😁
Thank You
Awesome tutorial, Thanks for sharing.
Thank you! Cheers!
This is really owsm
Thank you 😊
amazing, thanks for sharing.
You’re welcome ☺️
Fantastic work...谢谢师父
Lol 😂 thanks buddy
Excellent! thanks
You’re welcome ☺️
@@WenboZhao I send You a cookie ;) Best regards
Thank you! I wish you prosperity 😊
thank you so much🥰
Thank you so much for this
You’re welcome ☺️
Thank you 🙏😊 Sir for share your knowledge
thanks,,,, the tutorial is very good ,I can learn much about that
Amazing and awsome tutorial . one of the best channel thanks sharing for sharing. But I faced a problem when I want to insert the first face i hitted I then B but it doesnt give me the same result you have done kindly what can I do please??
Watch carefully, make sure your don’t miss any steps when you build the mesh, you will get the same result💪
thank uuu!
Nice
Hello Wenbo,
Great video. Do you have any tutorials to show how to create the rest of the bottle?
Nope, I have a course to teach people to do this
Awesome, thanks 🙏🏽
Thank you for our support:)
i cant get mine to look like this, every time i add modifier it lookjs like a solid staircase
You can also subdivide and add more loops if you need more than the face count he intended but overall great tutorial
👏👏👏👏👏
🥰
from 5:50, i dont know what these shortcuts are standing for to make it same lv
, i pressed the button but they didnt work. Please help me! Thank you
Are you using a Mac or a pc
@@WenboZhao I am using PC
@@WenboZhao using PC too, cant see the keys on the screen bcouse something is hiding it. can explain here? thanks alot!!
at 7:09, When I push I to insert and then B for the boundry, my boundry box is positioned at the top insead of the side like yours. How do i switch it?
Make sure you have the proper support loop
6:06 short cut please.❤️
G+Z and drag down
wenbo 你好，请问我在merge distance 的时候出现只是remove 1 vertices instead of 17 vertices, 这样的结果是没有跟到你步骤。 我发现后面adding loop cuts 出现问题。请问要怎样处理。
this happen because the plane size must be set to 1m
THX
Thank you
This was brilliant - so clear and didn't miss any vital steps out!
thanks for your support🥰
thank you
You’re welcome ☺️
Thank u
thanks! but how do I create suitable lid?
I just discovered your channel today. I'm learning a lot! Your videos and your whole channel are amazing! Thank You so much!
no problem mate🥰 welcome here！
good job , and ty for the tuto !
Hello ! I really love your chanel ! Many clever and usefull tips ! And it's very valuable to see someone speaking about lighting in Blender, who actually have a knowledge about lighting in the real world as a photograoher. Thanks a lot for sharing !
Thank you so much for your message Nicolas🥰 you made my day!
at 4:20 you select two consequent faces and just press and hold (CTRL SHIFT and + ) and it will repeat the process. btw great tutorial. Keep it up!
thanks
nice i like this approach because unless im in a hurry with pressured deadlines, I prefer to roll the sleeves up and get into modeling and try out ideas, experiement and find and discover techniques and approaches. So this tutorial was great to see thanks for putting it together!
You’re so welcome 😉
Thank you very much for this tutorial! It's very useful for beginners.
You're very welcome!
How to add shortcut svur? In my blender isnt available. Thanks
my bad, it is a free open sources addon, you can download it here: github.com/jayanam/shortcut_VUr
very elegant solution and clear explanation: Thank you so much. :)
You’re welcome ☺️
That's was so specific And so so so helpful!!
Glad to know! 🤓
What an amazing channel, i learned a lot, thank You!
Awesome, thank you!
i saw another tutorial , he did with another method... but that method was to remember but you presented a conceptual way of doing it and is best.... thanks
Thank you, this was very helpful
You’re welcome ☺️
thank you! This helped me so much.
No problem 😉
you are awesome, thanks!!
You’re welcome ☺️
Awesome thanks!
You’re welcome ☺️
Thank you for the video, I'm going to start to watch every tutorial of you
`Thank you
You’re welcome ☺️
Thank you!!!
You’re welcome ☺️
Thank you
You’re welcome ☺️
Amasing. Can you do a video how to do this screw inside the cap? Thanks
thanks for your support
Thank you sir!
what if theres a single thread how can i do that?
Same step, one less step on screw modifier
@@WenboZhao I tried it but my thread was blocky and it didn't looked good 😅 gotta try something else
❤️❤️❤️
🥰🥰🥰
can anyone help me that when following the step in 6:42, the inset is not in proportion. thank you!!
Try control + A to apply scale
Please could you show how to get the show keys thingy
What do you mean?
@@WenboZhao the addon where it show like when you left click or press a key or middle click stuff like that