3D Printing Filament! Best? Worst? Cosplay? Lets talk! - Live
ฝัง
- เผยแพร่เมื่อ 7 พ.ย. 2020
- -------------------------------------------------------------------------------------------------------------------------------------
~~~Things of Interest!~~~
~Join my Discord!~
Chat all things 3D Printing, Cosplay, Nerd and More!
Free for everyone! A Great place to learn and grow!
/ discord
~Sign up for my Patreon!~
Want more interaction? Behind the Scenes? Special Contests and Prizes?
Check out my Patreon and help support my builds!
/ franklybuilt
~Check out my other Social Media!~
Instagram (Quickest way to talk):
/ b9bccrvhdqs
Twitter (I share all things Nerd):
/ frankly_built
Facebook (Tons of photos and Albums) :
/ franklybuilt
Reddit (Just have to see for yourself!):
/ njtricker609
~STL Files and 3D Models~
Want AWESOME 3D Models and Files?
How about a Discount code for 20% off everything!
DO3D Forum: tiny.cc/f3g0pz
Use Code "FBT20" at checkout!
~~My recommended 3D Printers~
Creality Official Website:
www.creality3dofficial.com?sca_ref=206063.FX8wJeSQM4 - บันเทิง
![[UNCUT] รัฐสั่งหยุดปล่อยคลื่น! แต่หยุดพลังปะทุ “น้องหญิง” ไม่ได้ I คนดังนั่งเคลียร์](http://i.ytimg.com/vi/RmQh47eIiV0/mqdefault.jpg)
Dude. I’ve been wanting to get into 3D printing for a while now, and on Christmas Day, Amazon had the ender 3 pro for $160 USD. It comes in today, and since ordering it, this glorious algorithm put your videos in my radar. You are incredibly open and helpful in a space where people could EASILY gatekeep! Thank you so much!!!
Thanks a lot for the raw authentic energy, me and my son love watching you
Bro.....seriously appreciate your work saw your insta page........Idk why your chanell is so underrated......You definately deserve much more bud.....keep it up😁😁
You have great advice. I have been printing for 3 months solid and the best way to learn is just Print... Hair spray is still my go-to adhesion solution. Treseme #4 hold
Just watched, and actually stayed for the whole vid. Thanks man. Appreciate all the info.
Your Videos and Instruction are excellent. Thank you.
All people have to do you watch your 3d printing video an go from there. Like I said you saved my printers from going in the trash. I used what I learned from your video's to print my stuff right. Atomic filament is good too, it runs though my printers so smooth, amazon was ruining my printing heads.
This was incredibly helpful! Really appreciate it!
15:52 it’s so funny how we have the exact same name and same idea, in a way
i have tried PLA+ from inland and my first spooless roll i tried had a lot of tangles. it printed good but i had to untangle alot of it. many failed prints
I picked up the 20w with filters and the honey comb base
Hi, I recently purchased the sunlu petg that you used and I haven't been able to get it to work, it usually doesn't extrude and it can barely print a benchy, I was wondering what you had used for your settings like print speed and temp for it?
Thank you for your service!!!
Hey Frank... I heard you mention flexible PLA? Is it easier to finish than TPU? More durable? Less durable? Is it still PLA? In other words... I found 3DGloop to be the BEST way to finish PLA and bind parts together. I am wondering if it will still do well on flexible PLA since it works at the molecular level to bind the parts.
You were up and running good clear as a bell
Maybe I missed the filament thickness, but what would you recommend? I’m running an SV01 just getting started after watching your white ranger video.
Gargoyle might be good as well for last item if you need general defense+shield
I am going to start my iron man mk5 suit soon .Just waiting on my printers.
I live in sa diego California and I order Esun and sunlu pla plus all the time on problem.
Get your ultra bed on Amazon that’s where I got mine.
I will be using hot rod candy red for my Iron Man suit
I bought the clearity ender 3 s1 pro Edit diet after to print
Purchased SUNLU PLA+ 3D .75mm, 1.75 PLA Plus, Grey, everyone recommends a hardend nozzle. I am using a stock CR-10s Pro V2, what nozzle to you recommend? It appears to be propriety.
I use a stock nozzle
One Of These Days Im Gonna Catch Your Stream Live 😂
I just bought DURAMIC 3D PLA Plus (PLA+) Filament 1.75mm White 1kg
I want to use it for printing armor... any thoughts? Is it good?
im gonna print a din djarin mandalorian armor, i hope im not gonna mess it up, bc i live in switzerland and filament is quite expensive and im on a budged
Yes... Yes Sunlu is just GREAT PLA
Hey-
So I got the Ender 5 plus and had some good test prints with no problem so, but then upgraded the Capricorn Tube and extruder after a clogged nozel(moved the printer and didn’t re level...my fault) First print after upgrade was with Sunlu PLA+ and the third layer of the raft would not lay down right after multiple attempts. The layers are separating and lifting. I releveled and got same result on the 3rd layer. Tried regular Sunlu PVA and same thing. I was using .3 layer height and 70mm speed. Dropped to 80% during print and seems to be better as it does the 4th layer. I am at 210 degrees and 60 bed temp. Anything else it could be other than speed?
That honestly still sounds like a temp issue. I run 100mms average with no issues.
@@FranklyBuilt
I am running standard PLA at 210. How high should I go? I got the PLA+ to work well at 240 but was hard to get the supports off. Not sure if that is related or not. I have .6 nozzles coming as I know you said you use those.
Try 215-220
what filament you use?
Think I got luck with Petg so far iv managed to print a full helmet with 0 issues and used the cheapest Chinese filament they have on Amazon 👍
Which would you buy if you had to choose one.. Creality CR-10S Pro V2 (300x300x400mm) or Creality Ender 5 Plus (350x350x400mm)? both are the same price right now. so what would you or anyone who might know suggest?
I would do the 5 plus
What are the paint références you used for red and gold please ?
Rustoleum gold and red
@@FranklyBuilt thank you so much
thank god for that off handed comment about printing with black sunlu pla
That it runs hotter?
@@FranklyBuilt yea I got some today and I was having problems with under extension but now it’s fixed. So thank you
Hey I think your DO3D form link in the description is broken it takes you to a weird website
you said bondo is a waste of time -- since you print your helmet upside down you're going to end up with a gaps on the sphere. that's a LOT of wood filler to fix that - or do you not get gaps in your spheres?
I don’t get gaps. I know what you mean. Trust me. But typically that type of stuff falls into print quality. If you’re getting those rings then it can be a sign of poor support and or adhesion at the bottom few layers.
@@FranklyBuilt interesting I'll have to try on a small scale to get rid of them. I did high resolution prints and was still getting them, but I'm not sure on my support structures then. Thanks
Black absorbs heat so it makes sense to print hotter.
Not entirely true. Black only absorbs more heat from light. It has no effect on heat from other sources.
I didn't see iSANMATE's matte filament, I think it's incredible, I think iSANMATE's matte filament should be better than any filament you are comparing now
Thoughts on ASA filament ?
Never heard of it
I'm Japanese, so I'm not good at listening to English, so I'd like to know. Which filament is recommended, PLA or ABS? Dog cute
PLA+ or PETG
i got some sunlu pla filament but don’t know if it was pla plus or not, anyway when i printed with it is came out great... except for the retractions, they were really bad and there was a lot of stringing. do you have any fixes for that? also do you think i should just get esun instead? or monoprice
Stringing could be a temp and humidity issue. Just gotta do more testing
what percent of infill do you use?
5-10% usually
With this video being a year old and moving back to America. Have you switched filament brands or changed your opinion on them?
Honestly nah! I still use the same ones haha
@@FranklyBuilt okay thanks, is this the best way to ask questions or do you prefer other social media platforms?
Why PLA+ over PLA +?
If I have 3 printers in a room will I need an air purifier
Delays pretty bad... took me 3yrs to hear this lol
Any TL;DR?
Summary??
pla prices is so overpriced lately while petg is going for $13 to $16 a kg
Weird huh? Haha
is that dog alive ?
My Sib Husky Nanook is featured in almost all my content!
Let ppl have their fireworks.. this about filament.. and u somehow telling ppl about fireworks at one point like 😭