LIEBHERR LTM1750 - 9.1 with 56m Luffing Jib Setup | Part Two
ฝัง
- เผยแพร่เมื่อ 3 พ.ย. 2023
- Here is the LIEBHERR LTM1750 - 9.1 from Peck Tiong Choon being rigged with 56m of Luffing Jib on a closed road of Singapore. It's being used for the dismantling of a tower crane.
CAMERA GEARS I USED:
=================================================
CAMERA:
Canon EOS R50 - amzn.to/3KWhgn3
Canon RF 24 - 105 f/4L - amzn.to/47J8IK9
Mic:
RODE VideoMicro - amzn.to/3OYxqNU
=================================================
Like my video? Please give a like and subscribe to my channel!
/ sgheavyvehicles
To see more photos of such heavy cranes in action, please visit my good friend’s page on Flickr too!
flickr.com/photos/30298424@N0...
-Find Me On-
Tiktok: www.tiktok.com/@sgheavyvehicles
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product with the links that I provided, I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel!
#mobilecrane #crane - ยานยนต์และพาหนะ
![[TH] 2024 PMSL SEA W2D5 | Summer | วันอาทิตย์ จะขิตหรือจะรอด!](http://i.ytimg.com/vi/-4JLNwQRK-Y/mqdefault.jpg)
I never get tired of watching these incredible heavy machines in action. It's like poetry in motion!
Couldn't agree more!
This is the type and length of video I've been hoping Liebherr would produce. Thank you for your attention to detail and great camera angles. Very much appreciated.
Glad you liked it!
Operating cranes is one of the most satisfying jobs in the world. I have run cranes for the past twenty-six years and can truly say that once people get a job doing this, they will not want to do anything else except maybe rigging, which is equally important.
I have only operated a Tadano 25 ton RT twice when the drivers let me have a go (Asia).
We were lifting concrete in a hopper and its very careful work in case the hopper swings out too far and takes the crane outside of its limit. And I drove one around the site on another day, first gear so low but when that second gear comes in the surge forward with the torque is like WoW unexpected.
Overall its a job with constant danger and not for the faint hearted!
Yes this is True
@xraylife
You are absolutely correct there about the dangers that can occur unless the operator has been properly trained and schooled before there is time spent in the seat. One never learns too much and they should never think that they've got it under control, because thinking so can come back to haunt them in the end. I learn new things every single day and listen to reason when others try and tell me things that could lead to unsafe situations.
A truly magnificent beast of a crane! 💪 Stong and yet delicate 🕸️! A very complicated machine! Excellent Video 👍👍👍Great work!!!
Thank you! 👍
how smoothly they work , it is very interesting to observe such processes in general😊😊
Thanks for making this professional video! You put a lot of effort into it and I enjoyed the video!
Glad you enjoyed it!
6
thank you for part 2 i have been looking forward to this for so long
Hope you enjoyed it!
good job to all involved,thanks for sharing
For my saturday night. Thank you!!
This is so fascinating to watch.
Great video! I love your content, thanks for sharing.
Thanks for watching!
Great video. Greetings from Dundalk, Ireland.
Thanks for watching!
Nice video from start to end.. love it .
Thank you
Saya juga bekerja di perusahaan swasta yang menyewakan tower crane,tapi jenisnya adalah comansa,LCL 500 di indonesia.
Sungguh sangat luar biasa alat yang satu ini.
After all that steel, it’s just a bunch of pins holding it all together. 😂
EXELENT VIDIO.THANK YOU
I want to know plz how is the boom angle when machine working I mean main boom angle and telescopic boom length?
That is an epic crane.
You should see the really big cranes! Mammoet has built some ring cranes taller than this one which can lift hundreds of tons. The technology has advanced tremendously over the last 40 years. The use of counterweights is now standard, and luffing jibs are seen everywhere.
Mammoet’s Ring cranes can lift in the thousands, not hundreds 😂 Unfortunately that was never seen here in my country
I would have thought that THIS crane was an example of advances in technology over the last 40 years. Yes, the Mammoet cranes are extraordinary but, if I recall, they are designed for use in VERY highly specialised circumstances. By comparison this crane is adaptable to many situations.
@@Tedinoz It’s a very different kind of crane for a different purpose. It’s designed to be very mobile and versatile, but at that expense comes the lack of capacity compared with those heavy cranes.
You can not set up a ring crane in the middle of a city
But was a fantastic opportunity to watch
The company I worked for has streamlined this process we pick and pin boom sections straight from the truck during assembly and use the outriggers to tilt the carrier and extend the crane boom to keep tip and the sections as close to the ground as possible , we can do in minutes what's taking these guys hours
You got me trying to figure out how you guys tilt using the outriggers 😅😅
Mantap bosku
Bel video. 👍👍
Irgendwie habe ich das Gefühl, dass dieses Männer diesen Kranaufbau noch nicht allzuoft gemacht haben !!! Und ich habe auch noch nie gesehen, dass die Kontergewichte ungleichmäßig verteilt werden.
Somehow I have the feeling that these men haven't done this crane construction too often !!! And I have never seen the counterweights distributed unevenly.
did you video the process of the tower crane disassembly?
Unfortunately no.
The wind mills use some really tall ones
Alat yang sangat canggih.
THOSE ARE SOME LONG CABLES
Monster crane
One of my relatives work at this company
Hadir dari indonesia
Did i remember to put that clevis pin in ?🤔🤔
Lukkingh from Tamil Nadu india 🇮🇳 n. Mobil Crane Operator. ABDUL JALEEL SHAFI
Two many cooks spoil the broth
محل اجرای طرح را اعلام کنید
Stone crushers, classified as heavy machines, play a crucial role in minimizing environmental impact by efficiently repurposing extracted rock into valuable materials for construction.
This crane definitely does not need a rock crusher to assemble it or do its work.
A crane, to assemble a crane, to disassemble a crane. 🤔
So they use a small crane to assemble a bigger crane…then the bigger crane goes and disassembles an even bigger crane…😁😁😁
LiEBHERR LTM.10100.ton.52.meetar
11:51
All this just to lift a Playstation 5 to the 400th floor.
why not chinese made crane?
because germany made crane is better
Why does the country of origin matter? Are you that fragile and narrow minded?
Where is this?
Its in Singapore!
Could you crawl under the power pack next time and get more detailed shots while the weight cradle is being lifted up into place?
😂😂
I can try
@@SGHeavyVehicles I was joking - but yes more safe shots would be great!
@@xraylife Haha i see what i can do!
This is what happens when you give your kids an erector set for Christmas when they are about 5 years old they don't grow up they just get bigger toys .
Thats right! True passion never die 😁
My dad gave me a Meccano crane set for Christmas when I was about 12. It was not much different from this crane ☝🏻
So....a crane put together a crane that took apart another crane!
Can't watch, that background noise is terrible
What background noise?
European technology. Go away
Made in china
Sorry Charlie, made in Germany
It's a German made crane working in Singapore. How did you come up with China?
在新加坡……
Singapore
I saw the assembly of these as a replica with workers and small tools. 🏗 🚧 👷