Great video. What type of wrench/socket did you use to remove the 10mm bolt from the oil lube system in-between the turbo and the exhaust housing? Cannot fit a regular wrench or socket in the space and not enough room to turn it. Any special trick Or special tool???
Watching from hongkong po.Saludo po ako sa mga katulad nyo pong tatay na masipag.
Grabi c tay jb, daming alam na trabaho all in one ka po tay, 🧡🧡
ang galing naman po ninyo mag mekaniko replacement of turbo charger po ingat po kayo
ayos idol ang galing at napaayos mo yung ganyang klasing makina
Galing naman po tatay jb sa simula parang ang hirap po nyan at sa huli ok na po cya
Graveh effort sir ang hirap po nyan magiingat po kyo. Pahinga pahinga din pag may time.
ang galing mo talaga idol jb at pati makina kaya mong ayusin
thank you for sharing ur ideas abt engine sir. kahit komplikado gawin parang ang saya matuto
galling mo talaga idol kahit saan all around ka talaga mapa sa isda or makina
ayos po yan sir jb atleast magaling at marunong kayo sa ganyan hindi napo kayo tatawag pa ng technician.
Looks difficult, but you did it well. Now the new turbo charger will be the great replacement
muka pong mahirap.. ang galing nyo po.. and saludo po sa inyo sir..
Galing naman tatay jb namin. Sipag mo po tay, walang oras na nababakante ka po.. Ingat PO kau lagi dyan ni ta cath🧡
ingat po sir laban lang maaayos din po yan
Naku sir jb ang hirap po nyan baklas tapos kabit, magiingat po kayo.
Keep safe po kuya ang galing nio po
Obvious tlga professional na kayo sa inyo trbho.
you did it so easily. not everyone can do it. kudos
ang galing naman po ninyo mag mekaniko turbo charger po pinalitan nyo po ingat po kayo
Watching now po tay jb..
You are an expert. Great job.
Ganyan po pala sir.Thumbs up po
Ang galing naman ni tatay JB
salamat po sa pag bagagi sir sa amin
Watching from hk
you are the best
Helow po galing u naman po ngayon bago na siya
Thanks for the additionql information about turbo charger
Galing nyu naman po, keep uploading videos po and mag iingat po kayo palagi
this is realy great always do your job well and good
galing nyu naman po tay memorize nyu na po kung paano busisiin yung makina
galing naman ni sir sana matutunan ko din ung ganyan skills godbless po
Idol parang ang hirap gawin nyan at my mga pinalitan po pala kayo para gumana po ulit cya galing po
Ingat lagi dyan kabayan #teamjulia
Good morning to u idol amping
Good afternoon, I have the same problem bravo three did you manage to remove yours, do you have a solution?
Yes it shows on the video remove and install
Great video. What type of wrench/socket did you use to remove the 10mm bolt from the oil lube system in-between the turbo and the exhaust housing? Cannot fit a regular wrench or socket in the space and not enough room to turn it. Any special trick Or special tool???
Size 17mm but this is fabricated heat it up with acetylene then make it like a u shape
On the tube lube is 10mm with 1/4 drive extension and unversal joint
Galing mo lahat!! Di Lang dart player o fisherman pang heavy duty mechanic pa!...
Maraming salamat sir sa pag pasyal sa aking bakuran malaking karangalan ko sa iyong dalaw po salamat dalaw din ako sa iyo
Yanmar turbo charger removal ganyan din work ng kapatid ko about sa mga machine
great job! not everyone can do this.
Yanmar engine turbo charger removal ganyan po pala ginagawa mo dyan
Hard but it will works well
Turbo charger removal in yanmar engine ganyan po pala yan ginagawa
parang napaka simpl nalang talaga sa inyo na gawin yung mga troubleshoot sir ..
parang napaka hirap Yan idol gawin pero para sayu Ang Dali lang po no?
Hi po
parang Ang hirap gawin niyan tatay Lodi,pero parang yakang yaka mo lang po Yan,
Parqng qng hirap gawin daddy pero nagawa at natapos nyo po wala po kaai akung alam bout po jan daddy
galing nyu naman po tatay napaka active pa po memory nyu
Galeng naman po sir ang hirap po nyang ginagawa nyo ang magayos nyan. Ingatz po
basta makina ay interesso ako ng grabe
Salute ako sayo master galing
Sending support from madina KSA
Grabe effort sir galing nio po ingat po plgi
this is a hard job pero nice nice po sa inyo saludo ako
Nice galing nmn sana all mgaling magkalikot.
wala po talaga akong alam sa makina na yan tay galing nyu po mag english ..
Napaka technical naman po nian lods
Galing nio po kuya ingat po tau plgi
Madali lang yan palit lang pala Sir
Siman ka pala sir parang sa barko ata yan..
Woow full sopport
hr9mx
vum.fyi
Ano yung trabahu mga ganyan idol?
thank you for that superb information sir ..