ฝัง
- เผยแพร่เมื่อ 23 ธ.ค. 2019
- How to make homemade Slow Flyer RC Plane DIY step by step tutorial video
Large very slow flying RC plane lightweight electric motor glider for beginners
Wingspan: 1,8m (70")
Flying Weight: 142g (5 oz)
Materials: 3mm Axton XPS foam (density 22 kg/m3)
Motor: 1304 3000kv (9g)
Propeller: 6030
Receiver: FlySky FS2A 4CH (2g)
ESC: 12A (6g)
Servos: 3.7g x 2
LiPo battery: 350mah 7.4V (20g)
glue Titan Wild or UHU Por
Download RC plane plans: numavig.com/plans/Slow-Flyer/ - แนวปฏิบัติและการใช้ชีวิต
What is the glue?🙄
10:19
I had that question too. And you must be an American because the Titan Wild is not available here and in fact the Titan Wild he is using is contact cement and I can only find Titan Glue for concrete blocks on the internet.
I use Foam Tac from Beacon on my work with sheet foam.
I think UHU Por is much easier to find
In fact it is. And on this side of the pond, it is considered to be the go-to glue for all kinds of foam (and foam-anything else combinations).
@@NumaVIG Весь самолет на Титане склеен? А то, там другой флакончик, перелит просто?
Thank you for no music, great lighting and no focus hunting. The perfection in everything is just amazing. Everything so neat and xlean. Amazing. I usually play most long build video like this at low volume and 1.25 speed. But with yours I had the volume on and normal speed. The experience is immersive. Thank you for making this into an art.
Amazing!! I like the silence of creativity (no silly music in the background) just tools at work. Well done!!
I also hate background music😤
I'm an RC'r that has been building plans for 40 years, I really loved watching you do this, very cool well done
You are my ❤️😊
I love the wing hold down straps. You get an A+ for that one.
Pure craftsmanship. Not just in the building of the plane, but also in the way you showed how to do it.
That was one of the most satisfying videos I’ve watched. Nicely done, you’re a very talented builder.
I love your hand made clamps.
I've been in need of some like that from time to time.
I will try to build this with a few mods... Thank you for the plans 👍
this was a pure joy to watch. it really shows, that as much work and dedication went into the vodeo, as tha plane itself.
Hi NumaVig, simply said...Excellent work!! You are a true craftsman. Thank you for all the good tips.
I've actually built an RC airplane once back in the 80's using the paper plans from a Do it yourself kit everything was a pattern in the same dimensions, I went to a hobby shop and bought a bunch of balsa wood using sharp razors and hacksaw Blades. I was able to build and lay out every part it was a lot of fun, it flew just like the one in the kit ,I'm going to do it again
Greetings from over here in the states love your video I'm actually starting to build my own airplane from junk around me even made my own propellers, one with wood and one with aluminum they work great, taking motors from a DVD playerI certainly will find a RC car or something to scavenge the electronics here's a tip I have for all involved from my model rocket program days when gluing use a dab of Super Glue on both ends it will act as a clamp.
The 260° jig alone was worth the price of admission! Well done!
Stimmt, die Idee mit dieser "Kreisbogen"- Säge hat auch mich begeister
Fantastic work. Instead of using sandbags, in the 'old' days when we built balsa wood models, we used pins to hold pieces together while the glue dried. When dry, you just pull out the pins and there's only a little hole left which gets filled when you paint the model or cover it with a film. You can make all sorts of odd shapes hold together that way and if you need more strength, just use more pins. If the parts want to pull apart, just put the pins in at an angle.
okay. and, i will just ignore the MAJOR splitting of balsa components !!!! doh
This video is awsome and your building skills are inspiration .
Thank you for sharing
The best video ever seen in my life
Great job bro....
And thanks....
Brilliant techniques!! I like the sand bag "clamps" that conform to the shape of the wings.
Really carefully built and neat,lots of good tips in the video,thank you.
Very nice! I'm converting a cheap handthrown polystyrene glider into a brushless powered RC model at the moment. I'm using a 4 channel kit that I took out of a Tiger Moth park flyer. The Moth looks beautiful but doesn't fly too great and I don't want to damage it. Hope to get some flying fun out of this little project. Wish me luck!
I wacthed this vid more than 20 times already! The amount of expertise and satisfaction makes my day every time. Good job.
very nice and clean construction, and woodworking too, thanks for sharing
I see a lot of attention to keeping the build very lightweight even though it is also fragile. The fact it will only fly slow with the small motor should help prevent over stressing the airframe. I like watching slow and graceful fliers, even if the only days they can fly are very calm and breeze limited.
a slow-flyer does Not have to be ultra-light. fyi
th-cam.com/video/lZ1vUKcktVk/w-d-xo.html
Exactly correct. Some limits are there......
GREAT SLOW FLYER!!! Thanks for sharing!!!!!
Are you actually kidding. Some of the sanding and cutting made my teeth go on edge. But I don't think I've ever watched a video so intensely in all my life. You sir are a genius. I've got and fly many radio controlled planes and I love large slow flying planes. I would love one the same as yours. I consider myself to be pretty good when it comes to DIY and this sort of thing and I've built many radio controlled planes from kits. But I'm amazed at how you made that look so easy. Lol. I'm gobsmacked. I've subscribed 👍
A very filigran work! Sometimes i wish, we have here a "Leroy-Merlin" too! There you can get all, i think.
Incredible craftsmanship!
Beautiful no-compromise work. And under 250g, so won't have to registered here in Australia, when they bring in registration in 2022.
Very nice and precise work. The last time I saw such a thing was 36 years ago at school when a friend was making aircraft models.
Unbelievable the last post was three years ago. I’m behind. Awesome build man, as all of your builds. I’m currently building the Hydro version now, trying to make sense of the plans and combining aspects of both. It’s a fun project to build and I’m looking forward to flying it. It’s so slow and peaceful. Thank you for sharing
What I love about your videos is that you play crappy background music like everyone else on TH-cam. And your builds are great.
Beautiful work, dude! Fantastic airplane! 😃
the key tothe build is the aerofoil. everything else is standard plane building. good job no doubt, but the motor and prop, combined with the shape of the foil gives it the slow speed. i love slow flyers..thought the tail assembly was a little too complex. couldve just glued it to the top surface.
Flight test should see this. Very good use of cutting and jigs and templates. Love the way you formed the aerofoil wing
Yep
Love the use of DIY tools
13:45 If I see correctly, you have to make the polyhedral part's root about 1cm wider. So when you sand it to the right angle, it will fit perfectly with the middle section wing part.
Very high quality craftsmenship. Big salute to you Bro. Love watching your videos always. Keep posting. God bless.
craftsmanship
I picked up a couple of good tips here thank you. One thing I would have done is make support for the push rods to prevent flex. Will d/l the plans as it looks like fun.
agree. but, usually, wood/bamboo is sufficiently stiff; to a length of about one foot, or so. then, a single Guide, at the pushrod midpoint, would do the job.
Love the wing straps. Great idea!
By 'wing straps' do you mean the elastic to secure the wing to fuselage, if so that method has been in use since time began.
This is first class work! I'll have to find that orange foam
Back in the 60's, the AMA had the "builder of the model" rule. You had to prove you had built from a kit or plans to compete. These days, attaching wings and tail just does not mean building to me. Glad to see someone who truly builds a model.
What a treat!!! to watch you work.
Excellent stuff. Just the video I have been waiting for. I will have a bash at one of these. Cheers for taking the time to make the video.
really enjoyed watching that apart from the sharp knife in very close proximity to your hand at times. I have nicked myself a few times doing that!!!
I envy people that can be this patient. It must be a real pleasure...
Great workmanship.Thank-you for making plans available.
I would like to build this plane also, can you tell me where I can find the plans.
Hi sir i have a 2pcs 48000 rpm brushless motor do you think it will fly? And what gram of rc would it take?
Best tutorial video I have ever seen nicely done and a cleverly engineered model.
Great work! Amazing craftsmanship 😊
Your skills are far above mine , thanks for sharing.
Very impressive skills, not just building, but the videography is excellent, too.
Amazing job, truly a fantastic build. I haven't seen a better and more entertaining build 👌🏻👍🏻
alternative to Axton XPS foam ? in America?
that is a clean aircraft. And great tutorial.
J'adore ce genre de tuto. Facile à réaliser. Merci à toi..
Very nice model and very well made. However it was a lot of work to make the wing, and most of us don't have that sort of machinery. Nice way to do hinges, I'll try that. Thanks for posting.
Thank thank thank thank yoouuu for not having really loud annoying music in the background
good job hinge section is very interesting
where have you been all this time!, this was a beautiful build, instant subscribe
Love to think to empty the sand bags with a spoon too after each build too! :)
Great plane!
I would like to make my own. What is the angle of the wingtips up?
Beautifull plane, efficient tool for airfoil shaping!!!
leonardop51d N m
Well done. I also make compress styrofoam aircraft. The current one is a tailess swept wing design for high speed chase. Therefore only 2 servos required. The weight will be below 250gm and powered by 3S at 10amps max power. Cruising current around 7amps . Still under construction. 80 percent completed the wing and airframe.
Now THAT'S my kind of plane...
Makes a Radian look like a racer. :) Nice! Been waiting for something like this. :)
great work.. beautiful plane.. however being a slow flyer the buzzing noise of the tiny motor is somewhat of a problem.. remenbering indoor slow flyier or old rubber motor.. how about a bigger prop and a slow motor..!
Thank you for plans! Благодаря за чертежите :)
Simply great!
The KIT / plane I made years ago was all constructed of Balsa wood and a typ of paper that shrunk tight skin ,. This DO YOUR SELF IS GREAT IDEA ,. VERY GOOD JOB MAKING AND DESIGN
would love to build this one, where can I get the plans
Very interesting but the construction method is slightly complicated for a beginner.
Those who want to simplify it with a very little penalty in performance, could use the wing section with flat bottom (eventualy the upper surface of trailing edge overhangs for 2 cm) and reinforce structural critical points, for example the internal white sheet of fuselage and the upper surface of fuselage to to be extended 5 cm further the trailing edge (in opposit direction) to avoid the abrupt interruption of the structure (+2 g? but much better).
A true professional, very nice work, thanks for sharing.🤓
Interesting , is there any shop to buy all these Accessoires packet, to assemble at home? Please suggest
Congratulations! A lot of very good ideas.
Hello sir, I will be very grateful to you sir, please tell me what is the full name of this glue depron sheet you are pasting and also give its purchasing link Sir
Great build. You have amazing skill's.
Amazing Build and Craftsmanship!
Subscribed!!!
Thanks, best gift for my birthday! 😁🎁🎉
Очень аккуратная работа, было приятно смотреть, особенно, учитывая отсутствие музыки! Сам я начинал делать Цессну из потолочки, но что-то так и не завершил, забил на это хобби. Теперь постоянно руки чешутся взяться снова...
Самоль прекрасен . Делается за один вечер. Только крыло с первого раза скорее всего не получиться, запаситесь листами.
@@pavelgurenchuk2225 а что за клей используете?
@@pavelgurenchuk2225 и белый что за материал?
@@apodgrebelny Скорее всего обычнай потолочка. Кстати сегодня запускал самольёт. Летит и правла не обычно медленно. Надо сразу выставлять расходы на минимум. Я новичек поэтому ручку дергаю сильно. Нос задирается и скорость падает.
What size drill bit do you use for the motor mount?
Can I use normal car remote control?
Can i get remote control for this plane under 10$
At that speed and with those kinds of thrust i think you might get more bang for your buck on the lift department if you made the aerofoil more top chambered. I have no idea if it would cause other issues though.
Very nice build! Thank you for sharing.
Glues from poland are very good...
building houses with those
Sanding foam looks like ASMR
I like your videos, you spent a lot of time in the production. Step by step explained and you building is great! It's motivating me to try out ;-)
What keeps the wing foam sheeting to maintain its airfoil shape if the "ribs" run longwise and are not true ribs with the airfoil shape from LE to TE?
glue
Amazing build...
Just wondering? Do you have a link to that receiver you're using?
Have you try building with dollar tree foam? I have built some wings... And removed the paper covering of the foam.... Works great and they are cheap... ✌
How does it stay in the air if its so slow?
The sound is king……subbed
Hocam merhaba, kaliplari nerden bulabiliriz? Kalipsiz mumkun degil yapmak.
Can u tell me which wing airfoil profile do u use and your attack angle?
I do not know this airfoil name, I drew it myself . Angle can be measured in the plans
Great work, nice plane Nice to the point video showing build tips as you go
That fuselage is similar to one I'm building .You have given !e some ideas thanks.
I fly that way, thank you
Those cutting are so satisfying..❤️
Thanks for the reply on the glue. Excellent video by the way. I use Foam Tac from Beacon and for foam Adams 5mm sheet foam. The only Titan Wild I can see on internet is for concrete and I suspect that the kind of glue you are using is contact cement and not concrete glue.
( I've subscribed to your channel and passed on this link. )
Im lucky I can still get BAZIC brand at different dallor stores..they're $1.50
p/sheet thou...but they're pre color....It's better quality than Adams.
I dont see any depron at my local home depot
There's less rigs..ect. I can build 45" WS CUBs..but it's 800-825 gram AUW.
It just depends how in a hurry i get...I use tac glue ( liter but takes longer to dry)
a 2212 ( $5) 930 KV 10x5 on 2200mah 3s 40amp esc can fly it for 10 plus mins.
I actaully dont mind the model being heaver..so it wont get toss around in 5-10 wind....
It can do loops, rolls....Not super slow..but it'll float like a trainer.
The 2212 is actaully under size for that size model...but it's the wing loading
that's helping it...
I might be able to get away building a 60"...if I use 2217 850kv on a 12" prop
but I'll have to use 3000mah...use some thermal to help.
Im still in search of a smaller model so I can fly at a local park
I have a 30" on 2208 1400 kv on 8x5..it's too fast..there's too many trees.
it's 325-350 gram AUW
dedication at its best!
Can I use 1400kv motor to make it
Nice to meet you.I'm here to cheer you on!!
Thank you for the good video. I'm taking a video, too. Let's cheer for us and exchange information. I wish you all the best in the New Year!
what's the material of the wing? i always feel struggled making the wings with airfoil section😭