I cringe when I see videos of poor scratchbuilt RC planes. That happens too often. But watching your videos is a pleasure for the eyes and a deep satisfaction as admiring the engineering, the care and the precision. Many thanks for your so instructive videos.
I really loved the way you preciously craft the parts and they fit real good, You have patients to wait to glue every parts as it takes time to dry. :)
The way you stiffend up the Vertical Stab with carbon fiber strip was so simple yet genius..... I'm going to remember that trick for future building. You should be doing this work with balsa and end up with a REAL plane! Sorry, I just am a balsa/ plywood purist. My first airplane was a Carl Goldberg Eagle, and I STILL have it, ready to fly anytime. That was 24 years ago. No Foamy is going to be usable after that amount of time. Still flies straight and true, though it's a little heavier from the bracing and epoxy used after it's 2 crashes. Anyway, your video gave me some good ideas on building, as I've taken a few years, (Read MANY) break in building/ flying only to see that I can now make everything FPV if I want to. And I'm about to build and modify a Great Planes Spirit 2M Glider, and electrify the nose with a pretty hefty motor and use it for long distance FPV. Thanks for your posting this video!
You’re evidently quite experienced in working within depron, small tricks like taping the end of the blade and using the full length to slice can only come from experience. Very nice design very well made thank you.
И наглядно, и красиво, и забавно местами, и компоненты расписаны, и схемы выложены, и никто не балаболит, и музыки дурацкой нет. Но почему нет ляма подписчиков? Хотя х5 за год - тоже хорошо.
Congratulations, what a fantastic job you do; I really appreciate it a lot and I would like to know where you got the set of very efficient manual drills that are very practical for making airplanes. Best regards.
Great design! I've been trying to print out your mustang and make it, sadly it's in JPEG (I think) format and I can't use normal A4 printer to print it out. If you would import plans in PDF in vectorized graphics it would be very easy to scale them up without quality loss and to print them home printer via Adobe Acrobat reader printer menu
Please please please can you make an airplane with a detachable wing design, i.e., both the wing halves can detach with screws or something, for easy storage of these models??🙏🙏🙏 Regards from india 😁🙏🙏
What glue are you using? All the glues I can get my hands on just melt my depron PS: if you know about any specific ones that are easily available in Europe/ Germany, that would be even better
Добрый день. У меня есть пригоршня мелких моторов 1811-2900KV с тягой в 140-150г. Как думаете, потянет такой движок этот глайдер или хиловат? Не знаю куда их применить уже такие немощные
центровка вещь индивидуальная (задирает нос значит сдвинуть аккумулятор вперед и наоборот) я летал с такой th-cam.com/video/0a2lfjS3jgA/w-d-xo.html . Рудер тут огромная лопата да еще в струе от пропеллера, рулится прекрасно и по крену в том числе
It's used in underfloor heating and is similar to Depron. In the UK B&Q sell 3,6 and 9mm sheets under their Diall brand www.diy.com/search?term=Diall+Polystyrene+Insulation+board
My scratch foam aircraft construction starts out good but I am no where near the neatness of @NumaVIG - put me in the jealous category. I'm finding it hard to get a good glue other than hot glue gun and epoxy and I don't have patients for UHU glue.
@@MarkPrimavera you don't have to be "patient" for polymer glue (UHU is polymer glue as well). You simply put parts together and use masking tape so they'll dry in the position you want them to. If you don't like waiting you just got for another part of the plane and prepare it. Hot glue is nowhere as precise as polymer and is way lighter. However, hot glue is very useful when gluing firewall and landing gear since it's a bit flexible and will allow a little movement without breaking off
@@szajba8106 Thank you for the comment and I have started using UHU, you are right, while it is drying work on another part of the plane or what I sometimes do is clean up the workshop :)
@@MarkPrimavera exactly. In the beginning I wasn't very happy with long drying glue but unlike hot glue it lets you adjust parts together. If you make a mistake with hot glue you can't fix it
i have a random question (new to rc here), what is it with you rc guys and the messed up units. for example you say 2000mm, who even does that, it's 2 meters yo, if you like so many zeros why not 2000000um?? same thing with the batteries, i see 50000mAh, yo, that's 50Ah what is with the units that rc people use i just don't get it.
I started construction today on this glider, and so far so good but still not as neat and tidy as NumaVIG's work. We don't have this 5mm XPS foam underlay in our area so I used my table top foam cutter to make 5mm sheets from pink XPS foam, works very well. To see the foam cutter go to th-cam.com/video/WdFkp5-aSOY/w-d-xo.html - it really works great!
I cringe when I see videos of poor scratchbuilt RC planes. That happens too often.
But watching your videos is a pleasure for the eyes and a deep satisfaction as admiring the engineering, the care and the precision. Many thanks for your so instructive videos.
The poorly built ones are to show beginners that it doesn’t have to be perfect and they don’t have to stress
You are a true craftsman! I love your home-built tools to assist your precision construction. Thank you for this wonderful service to our hobby.
Reminds me of my first RC plane: A Gentle Lady 40 years ago
I recently bought the sophisticate lady, I believe that came after the gentle lady.
Still have your 049 engines?
No, I actually moved continents since then. I do have fun memories of my Cox buzzing...
I built one too!
I like that you included a thrust test of the motor and prop, very useful info. Great work
real nice editing! would love to see more build videos in a quality like this! thanks for your work!
Very creative foam cutting tools !
I knew I’d never see the appeal of foam building….until now. I’m so glad I was wrong :) Also, your directing and editing skills are amazing
I really loved the way you preciously craft the parts and they fit real good,
You have patients to wait to glue every parts as it takes time to dry. :)
Moet beautiful and detailed rc aircraft construction I've come across. No music is a bonus. Thank you.
The way you stiffend up the Vertical Stab with carbon fiber strip was so simple yet genius..... I'm going to remember that trick for future building. You should be doing this work with balsa and end up with a REAL plane! Sorry, I just am a balsa/ plywood purist. My first airplane was a Carl Goldberg Eagle, and I STILL have it, ready to fly anytime. That was 24 years ago. No Foamy is going to be usable after that amount of time. Still flies straight and true, though it's a little heavier from the bracing and epoxy used after it's 2 crashes. Anyway, your video gave me some good ideas on building, as I've taken a few years, (Read MANY) break in building/ flying only to see that I can now make everything FPV if I want to. And I'm about to build and modify a Great Planes Spirit 2M Glider, and electrify the nose with a pretty hefty motor and use it for long distance FPV. Thanks for your posting this video!
Ну Вы заморочились. Браво!!!
You’re evidently quite experienced in working within depron, small tricks like taping the end of the blade and using the full length to slice can only come from experience. Very nice design very well made thank you.
8:17 what is the distance between 1 and 2
And what should be the distance between 3 and 4 for making the wing
Is it 50 CM ?
yes, 50+50+50+50=200
Thank you so much
Просто шикарно. Технопорно прямо-таки)
Как всегдап у автора красивая работа. СПАСИБО.
Отличное видео. Давненько ничего не было. Спасибо большое.
И наглядно, и красиво, и забавно местами, и компоненты расписаны, и схемы выложены, и никто не балаболит, и музыки дурацкой нет. Но почему нет ляма подписчиков? Хотя х5 за год - тоже хорошо.
very good ideas 👍and plans from NumaVig, but plz, where to buy "Titan Wild "glue ? I did 'nt find in France
Use UHU Por
Another great build! Bravo! 👏
Why is it that super skilled people meet everything look super simple and easy? Awesome work
Great video !! I fall asleept during watch this video. Its so relaxing 😴
Realy nice build ! I‘ve got just one question… the wing should i make it whit 3mm or 6mm depron ?
9:21
@@NumaVIG aaaah ok Thanks i haven’t seen that you mesure the foam thickness
@@lulufpv you can measure everything yourself after you print the plans
@@NumaVIG ok
True Artisan. Learned some things watching. Lots of patience too. Peace ☮️ Wheelchairjohn in Idaho USA 😎
Absolutely brilliant job Sir! I will watch the video over and over again. Well done 👏
Do I see this right? All parts use 5mm foam, except the outer part of the wings which are 3mm? NumaVIG your build videos are so classy.
Very good scratch built !
All your videos are a pleasure to watch, excellently designed plane. Keep up the good work! 👍🏻
Very gifted in original creations!
great techniques, good learning. thanks for the generosity to share
Unmatched skills, Excellent, love to watch your videos, neat and clean
Another great build. Well done. I've subscribed. Look forward to more.
Great work!
Great job ! So light !
Your build is satisfying ❤️😀❤️
hey! It would be very interesting if you build a f5j 2.6 at 4 meter. 12g x dm2 fai !
Блин, как же круто! Очень интересно выполнен "механизм" соединения законцовок крыла.
А где вы покупали цветной скотч?
в интернете
Цветной скотч тоже начал искать после этих видео и нашёл целую кучу в обычных канцтоварах и строительных магазинах.
Excellent work!! May I know the maximum take-off weight?
Hey, what's the position of COG on the wing with respect to leading-edge? By the way, the build was awesome👏👏👏
th-cam.com/video/0a2lfjS3jgA/w-d-xo.html
Truly professional 👍
Fine glider! You used 3 or 5mm depron to make wings?
3 mm skin
@@NumaVIGThanks
Very nice video, thank you for posting and the work that went into it's making
Absolute great design- thanks. Would it be possible to also upload A4 format drawings?
th-cam.com/video/Okvc5qxZsiA/w-d-xo.html
Superb building sir.
Congratulations, what a fantastic job you do; I really appreciate it a lot and I would like to know where you got the set of very efficient manual drills that are very practical for making airplanes. Best regards.
go to webpage with plans (link in description)
Really a nice glider. Could you tell me where is the CG exactly? Thanks.
th-cam.com/video/0a2lfjS3jgA/w-d-xo.html
How to curve the wing?
Please make a RC sky arrow plane
EXCELLENT VIDEO. I LEARNED A LOT FROM IT. CONGTATS
carlos
Great design! I've been trying to print out your mustang and make it, sadly it's in JPEG (I think) format and I can't use normal A4 printer to print it out. If you would import plans in PDF in vectorized graphics it would be very easy to scale them up without quality loss and to print them home printer via Adobe Acrobat reader printer menu
use any JPEG graphics editor or software of you printer to print A3 in two A4 th-cam.com/video/Okvc5qxZsiA/w-d-xo.html
Salut
Merci pour le partage du plan
Ou ce trouve le centre de gravité CG ?
Merci
th-cam.com/video/0a2lfjS3jgA/w-d-xo.html
Please please please can you make an airplane with a detachable wing design, i.e., both the wing halves can detach with screws or something, for easy storage of these models??🙏🙏🙏
Regards from india 😁🙏🙏
Bonjour merci pour vos montages , mais en France impossible de trouver de la Colle TITAN Wild comment faire pour m'en procurer Merci
En France la colle universelle de la marque Tesa fera l'affaire.
fantastic video
What glue are you using?
All the glues I can get my hands on just melt my depron
PS: if you know about any specific ones that are easily available in Europe/ Germany, that would be even better
UHU Por
Well done sir! Where did you get rotary tool??
go to webpage with plans
Está muy bien hecho, eres un artesano.
🇯🇪
Добрый день. У меня есть пригоршня мелких моторов 1811-2900KV с тягой в 140-150г. Как думаете, потянет такой движок этот глайдер или хиловат? Не знаю куда их применить уже такие немощные
с руки запросто, ему много и не надо
May have to make this one...
What brand of knife do you use, it's so sharp
OLFA Black Max
Hello this plane is it made for beginners in modeling please.
Great videos man. Reminds me of my Olympic 650 I had a a kid 👍
Какая центровка у этой модели ? ( если можно то в мм от передней кромки) сделал как у автора и не летит(не управляется совсем по рудеру)
центровка вещь индивидуальная (задирает нос значит сдвинуть аккумулятор вперед и наоборот) я летал с такой th-cam.com/video/0a2lfjS3jgA/w-d-xo.html . Рудер тут огромная лопата да еще в струе от пропеллера, рулится прекрасно и по крену в том числе
Hello Friend. I would like to know what software you use to design your plants. Thanks!
Photoshop
Thx...good flights for you!
Very good work 😎
Наконец Вы применили нормальную технологию резки пенопласта.
Can I use 2400kv motor for fast fly
I have similar method at making wing joiner from wood, but now I have 3d printer I just print it, sub
Hi. I've got AEO 1304 3000KV. Can I use it on this plane? Thanks
yes
@@NumaVIG Thanks
Great job as usual...
What is the material??
XPS foam
It's used in underfloor heating and is similar to Depron. In the UK B&Q sell 3,6 and 9mm sheets under their Diall brand www.diy.com/search?term=Diall+Polystyrene+Insulation+board
Пожалуйста, скажи в каком Леруа ты покупаешь подложку под ламинат (белую).
в Максидоме, но там не всегда белая
@@NumaVIG спасибо
I am new to this hobby, please give me this plan pdf for free .. would be greatful 😊
You can find his plans on his website, the link is in the description of the video
15:23
0.05g of leftover plastic
NumaVig: and i took that personally
Bonjour. Comment impression le plan Svp merci
And where do you get the XPS underlay?
1. Leroy Merlin - hardware(or DIY) store. (in this video)
2. Google + xps underlay for laminate
try asking on your local aircraft model forum
where can I get the plans for this glider ?
in description below video
I’m so confused where do you get those patterns…?
he creates them
Link is in description :)
Hi wehere i can get plans
in description
Show meu amigo... parabéns.
geldi gönlümün efendisi
Thank you so match ❤️😘
Cool brother
I can only imagine the few dislikes coming from from truly jealous souls.
My scratch foam aircraft construction starts out good but I am no where near the neatness of @NumaVIG - put me in the jealous category. I'm finding it hard to get a good glue other than hot glue gun and epoxy and I don't have patients for UHU glue.
@@MarkPrimavera you don't have to be "patient" for polymer glue (UHU is polymer glue as well). You simply put parts together and use masking tape so they'll dry in the position you want them to. If you don't like waiting you just got for another part of the plane and prepare it. Hot glue is nowhere as precise as polymer and is way lighter. However, hot glue is very useful when gluing firewall and landing gear since it's a bit flexible and will allow a little movement without breaking off
@@szajba8106 Thank you for the comment and I have started using UHU, you are right, while it is drying work on another part of the plane or what I sometimes do is clean up the workshop :)
@@MarkPrimavera exactly. In the beginning I wasn't very happy with long drying glue but unlike hot glue it lets you adjust parts together. If you make a mistake with hot glue you can't fix it
Where can I get plans Many thanks
link in description
Класс! А как чертёж скачать?
Правой кнопкой мыши - сохранить как..
@@АлександрИванович-з7ы спасибо. Не додумался
This is asmr for plane guys... Sadly I can't find this type of xps at my hardware store :/
Its ASMR
Очень круто!
i have a random question (new to rc here), what is it with you rc guys and the messed up units. for example you say 2000mm, who even does that, it's 2 meters yo, if you like so many zeros why not 2000000um?? same thing with the batteries, i see 50000mAh, yo, that's 50Ah what is with the units that rc people use i just don't get it.
you live in Russia in my city fortitude Leroy Merlin does not sell depron
Hi! He is using undarlay for laminate flooring. Look for XPS sheets (Extruded Polystyrene Foam)
Я тоже живу в России и в моём маленьком городе такое не продаётся.
Try - google + "xps underlay for laminate", or "XPS foam"
The foam is also used in underfloor heating so worth checking companies who sell those products
Genial
I started construction today on this glider, and so far so good but still not as neat and tidy as NumaVIG's work. We don't have this 5mm XPS foam underlay in our area so I used my table top foam cutter to make 5mm sheets from pink XPS foam, works very well. To see the foam cutter go to th-cam.com/video/WdFkp5-aSOY/w-d-xo.html - it really works great!
👍🇧🇷🇧🇷🇧🇷
Subscriber
You should add background music.
no
@@NumaVIG why man
@@sajalacharjee7008 ASMR! :)
It's one thing I like about his videos, I agree no music.
I agree, in this case, no music allows us to focus on the details of the outstanding videography and workmanship.