Nice install with the limited space that the C-HR has. I planned to install on my sister car this weekend. But don't want to mess too much with the electrical or void any warranty. Will power the amp from the cigarette lighter socket, as the amp is using 5 amps for the subwoofer. Hopefully the right rear speaker that you tapped into will provide the mono input that the amplifier needs.
@psychedelic4215 - Purchase a cigarette lighter extension cable 10 ft long, cut off the end that you don't need and connect the wiring to the power connection of your powered subwoofer amplifier connection.
Thanks so much for making this video!About to add a powered sub to my daughter’s C-HR and could not find wire colors for a 2021. Found a 2020 which are the same but didn’t know that until I found your video.
I believe that with a Multi-Meter, the Speaker negative should have almost zero resistance with the non-painted part of the car frame (A bolt holding down the car seat). I haven't check to verify, but you can check.
Nice install with the limited space that the C-HR has. I planned to install on my sister car this weekend. But don't want to mess too much with the electrical or void any warranty. Will power the amp from the cigarette lighter socket, as the amp is using 5 amps for the subwoofer. Hopefully the right rear speaker that you tapped into will provide the mono input that the amplifier needs.
Can you please help me, where i can find a subwoofer connected to the cigerett lighter?
@psychedelic4215 - Purchase a cigarette lighter extension cable 10 ft long, cut off the end that you don't need and connect the wiring to the power connection of your powered subwoofer amplifier connection.
Thanks so much for making this video!About to add a powered sub to my daughter’s C-HR and could not find wire colors for a 2021. Found a 2020 which are the same but didn’t know that until I found your video.
Wow that looks tough! Solid work!
Where did you tap the remote wire to?
Great video! Was going to install an amp in my CHR in a few weeks. How did you remove the middle lower pillar where the seat belt goes through?
Its been a minute since i did that but i think it just pulls out ....in there with clips.
How do you work out which is the positive and negative factory speaker wire?
I believe that with a Multi-Meter, the Speaker negative should have almost zero resistance with the non-painted part of the car frame (A bolt holding down the car seat). I haven't check to verify, but you can check.
Wiring digram shows red is pos on passenger side and black on the driver side.