I just want to state I have the RP-8000F and just want to say I tested my speakers at 1m like he did and it showed the same hole he showed. I then tested the speakers at 3m which is my listening distance in my home theatre in all 3 front row seats and that same hole was gone. So if you do listen to these speakers at 1m then I agree there is an issue. I just don't want people that might use these at a greater distance to rule them out because of this video, because, in my opinion, they are great for home theatre use and don't need the "upgrade" at that distance.
Thank you for the clarification! I was freaking out from this video, because I just bought them with my hard earned money, but now I calmed down a bit.
@@tonezou3918 Did you like the sound before watching this video? If yes you shouldn't even worry about it. Remember these speakers are for you to enjoy!
I just completed the upgrade kit for my Klipsch RP 8000F's and am blown away by the difference it made! I already thought they sounded good but decided after watching this channel for a while to take the dive and do the upgrade! Danny makes the kit really easy to DYI! So for all the nay sayers and anyone who is skeptical about if parts matter, i am here to tell you that it makes a Huge difference! I can't believe these are even the same speakers! Keep up the good work Danny and thanks for getting everything shipped out quickly!
Update on the upgrade, i am about 40 hours in and everything is really starting to smooth out! The tweeters were a little on the bright side at first but now blend nicely and these speakers have been taken to the next level with this upgrade! I listen to a lot of different music but mostly am a metalhead, especially Thrash Metal! The guitars really pop now! As i said before if you are skeptical don't be! Danny knows what he is talking about! My equipment is as follows, Audio Technica LP 140 XP with an Ortofon 2m Black LVB 250, Project Tube Box Phono Stage with Gold Lion Tubes, Cambridge AXR 100, Audioquest Cables and for digital i use a Brennan B2 run through the built in Dac on the AXR! Thanks again to GR Reseach for the great customer service!
I just completed this upgrade on my 280fs after thinking about it for some time. As mentioned before, it shares the same OEM crossover as the 8000F. This kit is a good amount of work and you will need to give yourself some time, but it rewards you greatly in the end. Good for us hobbyists. It WILL make this a better tower speaker. If you are an audioholic, the difference is big. It brings out the mids, takes the uncomfortable peak off the tweeter, especially when you turn things up, but it does not take away from the detail or clarity of it. Instead it tames it. Holding my ear up to the two woofers I can tell that the bottom woofer now only plays the lows and the top woofer plays mid range. If you bought this tower and it did not sound as good as you thought it would, this fixes that feeling. You will hear instruments, voices, and other significant details in your music that were left out before. Very pleased with this upgrade.
Did you notice a loss in sparkle from cymbals before the upgrade? And if so did they come back? To me it seems that part of the range is muted slightly as the graph shows. What size board for the crossover? Thanks.
I've got to wonder about the 1m measurement also. I doubt many designs (especially horn loaded designs) would have proper driver integration at such a close distance. I've got JBL K2 S9900's and I sit about 9 ft away, and feel like I could be farther, as if it's the first point that they integrate well, but I've got a small house so that's all my room will allow. I'd bet the 1m measurement shows issues, that wouldn't be issues at normal listening distances. I get your points about not measuring the room response though as well, and why you keep the mic close. Also, I've watched several movies on an RP-8000F Atmos system, that was rebuilt with your crossovers and it did sound great, so I'm not knocking your design, just interested in the effects that the close mic placement might be having on your measurements. Incidentally, I have stood in the Klipsch anechoic chamber with it sealed up. I could hear people talking outside the room, so the door seal wasn't exactly perfect. I also think that Klipsch purposefully designs a dip sometimes between drivers to make them sound more "Detailed". I believe they actually told me that. So take that for what it's worth. I'm a midrange guy, so I don't want any dips in my mids.
I used to own a pair of RF62. A similar model. Never measured anything but I liked the way they sounded. One really wants to follow positioning recommendations like putting them away 0.8 m from side and rear wall and turn em in a little to listener's chair.
Boy. Ive been in a lot of fancy houses with professional systems many times more extensive than my 2500 dollar klipsch setup and id say mine sounds every bit as good for any normal person. Now i will say that im sure there IS a scientific sweer spot or correct sound that can be achievee but I really like the way a klipsch sounds out of the box.
Yeah and an EQ will help compensate for any midrange drop. I’ve certainly never noticed it when listening. If anything they seem to have a bump to my ears but everybody hears differently.
That response chart looks like how I set my EQ, scooping out the mids a bit. Mine sound great. But, to be honest, I would actually like to pull down a wider Q around that point.
Never let a graph tell you what you enjoy. Home theater is meant yo be fun. I bet of this guy’s customers never even knew they didn’t like their speakers until they saw this.
Like I said in another comment: I want an EQ, so I can scoop out the mids even more. When I was 16, my car EQ had the slides in the classic V pattern. For the last 40 years, I have found that my EQs have started flat, but by a month later, that EQ looks like a V. It is just what I prefer, even when trying to stay flat. So, to say this about my RP8000Fs, I'd have to agree with Klipsch's design. But I love knowledge, and I appreciate the commentary, regardless. Edit: This isn't what Klipsch's specs look like. However, I acknowledge that marketing can make anything look good by adjusting chart detail.
I really like your business model, offering well designed kits to improve speakers we already own. Interesting to listen to you as well. It probably would help your sales to have a web page with a list of all the speakers you have designed with the kit price listed and being able to add that to a cart and order it right on the site. I am also curious to know if you have any recommendations of great value for the money speakers that sound great with your upgrades.
The business model is genius. He "upgrades" the most commonly bought brand in the US, in the most common price range that would include consumers that would likely purchase the kit. He clearly knows what hes talking about and displays the information clearly. The flip side to this is that after watching 100s of videos and reviews about certain Klipsch speakers that would give them a "worth buying" rating, this man can make me change my opinion on buying entirely. Its frusterating to be honest. He presents the data and there is no arguing about it. He is correct. Without any context on cost or comparisons to other speakers in the same range, by the end of the video your left with the idea that the speaker is shit UNLESS you pay an additional 350 for kit. In which case, then you would be in an entirely different price category. Overall i appreciate the info. BUT I am not buying the 8000s and the overwhelming factor being this video. In turn i will not be buying a kit from you either. I dont expect you to lie about the numbers but i suggest you find another sub $1000 tower or $300 bookshelf and pick it apart just the same and i that point, I a consumer, can look at both and make a purchase I feel good about and THEN i can go "Maybe now lets see what the kit can do?" OR lets see what he says about the $1350 step up and maybe i just buy that?
If there is an audible improvement I would go for it. I wish I could find reviews about this mod. Until then I remain skeptical. I see the gap in the middle range but I'm not sure how it translates into the listening experience. I've ordered these speakers and hopefully they will arrive in a week.
@@hahdanghongha7810 They sound about as clear as my old B&W 805s but bigger, more spacious. It still needs some more time to break in. At this point I'm 90% sure that I'll keep them. I have a subwoofer but I don't feel the need to use it with these speakers. However I'm not a huge fan of how they look.
@@gejdfr05 I have a set and they sound wonderful to me....I don't think they were design to be flat, they have color like all Klip's...it about the music not the freq, respond at X range, they have the classic Big Klips sound
@@level600a Utimately, it ends up being about personal preference. I'm looking for speakers with a flat responce. I think Klipsch look ugly (those copper colored cones) and sound shouty and boomy. No doubt some are 'better' than others but I've yet to hear any I liked.
That 'before' response curve would make Klipsch's spec sheet a total lie by a very large margin. Kinda hard to believe but not impossible I suppose. Just seems extraordinary that they would let them go like that.
With this big of a waveguide for the tweeter, they should have designed it with a d'appolito arrangement. That way the accoustic center would be much more manageable.
@@dannyrichie9743 Danny, I'm someone who has replaced stock crossover parts on Magnepans and know the amazing improvement just doing that can bring about. I don't doubt your mod can have a positive impact on the 8000 SQ. However, to gain credibility it's not enough that you talk about what other people say to you privately. Those folks should be able to share their stories with the rest of us who contemplate an improvement. Maybe I've missed some reading, but people who feel good about something are typically very eager to share their experience directly.
I've read another review on the 8000f from audioholics who did frequency response testing. Their charts show the speakers to be almost completely neutral throughout the entire range. Very different than this measurement with such a massive dip in the midrange. Just curious to understand how they can have such different results?
I saw that one also, because I have the older model RP 280f's. Very disappointed in your measurements compared to Audioholics measurements on RP8000f. Why such a difference in measurements ?
The reviewer at Audioholics confirmed that he was able to get the same measurements as well, but they choose not to publish them showing the dipped area.
@@dannyrichie9743 I figure you can make any speaker show a different frequency response depending on the room and equipment it's tested with. The audioholics guys show their test was done outdoors to eliminate echo since they don't have an anechoic room. I guess my main point is how do we know who's right, and whether or not these modifications will actually work for us?
@@richelh First of all, my measurements use a gated time window. So there are no room reflections or echo in the response. And the reviewer reported (on the discussion here on TH-cam) that he was able to get those same measurements. There is no he's right or I'm right. The measurements can both be an accurate representation from the point they were measured from. I could have moved out further away and below tweeter axis where the drivers time arrival was a little better, but to find an ideal response is not the point. It is to get an overview of the response on axis and off axis as to have a better idea of what the room response will be, how the time arrival of the drivers are, and how that will effect the imagining and sound stage. And in this case the drivers were not reaching one another in range or phase. And they had an uneven response on and off axis. There is no debate of that. It's a fact. And the modifications are a HUGE improvement. Not only are all of those areas addressed and significantly improved, but the quality of the parts is a HUGE improvement as well. The performance jump across the board takes them WAY beyond where they were from the factory, and those that have already implemented the upgrade confirm that as well.
Hello GR-Research, your video had me curious as i was on the fence of buying these speakers a while ago. Since I'm not an audio expert, i figured the best way to validate your claims about the flaws of this speaker would be to reach out to Klipsch's support and allow them to counter your arguments. Finally, one month later i receive a reply and guess what the say? "I suggest disregarding that video. The RP-8000F are great speakers!" ...
No. Klipsch will defend their under-engineered mid-fi products. Never go by a manufacturers claims. I've modded Klipsch for 20 years with Bob Crites and later GR research methods. The mods radically improved the speakers in a quantifiable, measurable way. DO NOT let anyone tell you factory klipsch are perfect as is. They are mid-fi....period.
A simple survey by Danny of the satisfaction of his customers with the mod would give us valuable information. If I was Danny, that's what I would do. Saying A LOT means nothing.
Everyone on the klipsch Facebook page hates you for this, im trying to explain to them that you do a good service and weren't bashing klipsch and that you know what you are talking about but I am not articulate enough to defend you, can you make a a video explaining how you started and how you are helping the average consumer. Please I love your video and I want to stand up for you!
Picked up a pair of these for $600 in 2024. I listen at 3 meters. Even on my 30 watt Eico tubes amps, they have something missing in the mid range. Is this the fix?
Thanks for the work and dedication,sir. I did kind of solve this problem otherwise… I did split behind the speaker that crossover bridge and connected two inputs on two outputs of my receiver. Now crossover should be kind of disabled?! I did measure with audyssey and middle drop is mostly gone but it is still there in 1-2db variation. The question would be: is it a very bad idea to give this task to a receiver?
I got the rp 5000f , love them, But great stuff here. You don't deserve the bs people are giving here. Great idea you have looking at pre made speakers, and see how they can be improved. I am a bit pissed that klipsch has such a thing in there and it isn't fixed a bit more. But i am not a hardcore audiophile and love how they sound. Although i dont know muchh better, my previous ones where wharfedales. Hope klipsch will see this video and fix it to some extend. Keep doing what you are doing. Cheers.
curious about doing this to mine, but honestly they sound very good to me. I dont notice any dip or null in sound at all. But i also do a room correction and have subs. As a honest businessman, is this really worth it? Am i going to be "wowed"?? i was pretty wowed and still am listening to these speakers
I have read other reviews on this speaker and they rate it very well. I don't understand why your review is so much different. Thanks for a different point of view.
I can't speak for anyone else. I try to just shoot straight and tell it like it is. The response issues have been confirmed by others as well. There is certainly a hole in the response. There is a time domain issue there too. Cabinets are lightly made and need No Rez badly. The parts quality on them was very poor. They were kind of a disaster. I am not really sure how anyone else would thing otherwise.
One bad review based on measurements, not listening, and so many people are ready to crucify this speaker. If the measured hole was a problem, Best Buy would not be running out of the model nationally. Or is the fact that Best Buy sells it proof that the 8000 is not a serious audiophile speaker? There is no doubt that most speakers can be improved with better parts. Would the SQ difference be significant? Would we be willing to pay a higher price? I have no doubt Danny is honest in his assessment. I am an avid live concert goer and also have no doubt that what the RP-8000F offers is a pretty realistic presentation of well-recorded live performances.
I could have sworn Best Buy sells the Refernece line and not the Reference Premier line? I like the sound of my rp160s, they ain't half bad. I would love to hear one of Danny's designs in person!
I have a pair of RP-8000Fs and they are my first Klipsch speakers. I bought them mostly due to the mostly positive reviews on TH-cam and other sources. At first I was really impressed since I could hear sounds in songs I had never heard before. Then I started to notice that certain types of music sounds dramatically better than others. Classical, certain types of rock like Steely Dan, Pink Floyd etc sounded great. Then I started to notice that some types of music didn't sound very good at all like hard rock and heavy metal. There were guitar parts and some vocals that seem to be missing in certain ranges. If I wasn't very familiar with the music I may not have noticed but it started to bother me and I found myself only listening to music that sounded the best with the speakers. Then I watched this video a while ago and It seemed like he hit the nail on the head. I think that range where the drop off is is the range that is missing and bothers me. I am considering doing the upgrade but I just don't know about pulling apart my $ 1500 set of speakers and messing around with them. Especially if I mess them up my wife would never let me live it down.
I have a set of Ref. IV RF-82, RC-62, RS-52 and I love the towers for critical stereo listening and as well, movies.. but, my center seems to have a fault in the x-over. It rings ear-piercingly so at certain voice tones. I ordered a set of RP-504c II and RP-8000f II so I would like to entertain these fixes for my center, and might as well match the towers as well. I will try to upload some findings to my channel. Thanks for all the years of efforts Danny. I finally have a valid case to try this out.
IYO I have the RF-35 and RF-82II and they sound Muddy we all know about the tweeters to bright.Why did the smaller RF-42II Sound so good the the Bigger ones sound so Muddy?
First of all the drivers are 8" not 6.5". Secondly you measure at 1 meter. Nobody listens to music at 1 meter. Great range if one wants to measure sensitivity. Most people listen at 3 to 4 meters. At that distance their is no hole. I would kindly suggest you re-test at 3 meters (real world listening distance) and you will see)hear no hole. The speakers don't need any further upward tilt either. Toe in is dependent on distance as such this is variable.
Interesting....A LOT of reviews on this particular speaker are positive, including one from the guys at Audioholics. In fact, this is the first negative review I’ve seen on them. Who do I trust, the one guy who doesn’t even know the size of the woofers who says the design is broken and he “fixed” it or everyone else?
He's approaching it from an electrical engineer / audiophile perspective which may or may not be what everyone wants. All he was trying to do was to create a flat response output which is what audiophiles desire but may not sound the most pleasant depending on what type of music you listen to. Many "popular" speakers/headphones are focused on creating "happy face waveforms" where there is a peak on the bottom and high and drop in the mid which is EXACTLY what Klipsch did here because many people want lots of bass and treble but don't care as much on the mid. He's basically boosting the mid with his upgraded circuit which may not sound as pleasant DEPENDING on the music content. Probably sounds AMAZING for classical but maybe not so great for rock/hip-hop/electronic.
@@Jedi2155 you're completely right so not trying to bash. Just this speaker isn't anything close to the "happy face" this is just a completely wrong design from Klipsh. I've designed a few speakers myself and tried flat and smily responses en found I enjoy flat ish with a 1 to 2 dB drop from 200 orso Hz to the top end.
@@Jedi2155 You are 500 percent right.All Klipsch reference speakers Danny tests have the same response.Klipsch wants these speakers to sound like the bass and treble controls on the amplifier are turned up, and that sound is immensely popular as are the speakers.I used to up the same controls when I got into hi fi in the 1970's.Klipsch has killed two birds with one stone, got the sound they want while saving money on a lousy crossover.It is surprising how many self styled audiophile reviewers worship these speakers.Danny has done the right thing by flattening the frequency response, addressing the phase anomalies and improving the spectral plot.Now if one wants to alter the response to the bass up- treble up shape use an equaliser .I am sure details,imaging the soundstage will still be better thanbefore.
I just ordered 2 RP-280F front drivers as well as 1 RP-504C Center and 2 RP -502s Surrounds. They have not arrived yet, should be by Mon Nov 2 2020. Are there issues with these that you know of?
So i bought these 2 months ago and have them hooked up to a good receiver a nice dac nd a beautiful amp and i have the speakers about 2 feet from the wall and let me tell you nothing but perfection. The sound is great its everything i wanted without messing with anything. Just use some good front end components and you will not be disappointed. If you use poor components then you'll get poor sound. But for me no problems and too buy anything else would be a waste of my money.
I'm beginning to wonder if Klipsch is on to something here. Seems that a lot of their speakers that Danny look at have the V shape dip in response curve. I don't know about you, but ever since I was a kid whenever I get my hands on a stereo that has an equalizer I always set the EQ to look just like a V curve, we love to turn up the bass and treble and tune down the mids.
If it was intentional then we would just see it as an amplitude variation. Unfortunately it was caused from drivers not being in phase as well. No one does that on purpose.
I have the RP-5000f and they sound Amazing, I bet your sound Amazing to. so you can leave it there. The stock Klipsch are still Really Good speakers and the Cross over are still Very good and better than most speakers out there. the Tweeter are Amazing (I still turn down the treble a lot) and they look Amazing and they Rock out. (stock) But all speaker can be improved and if you go into Danny level than your in the Big leagues and he will rip a part any speakers & He also can take your speakers into another level. it appears that the farther away the lower woofer is from the tweether the bigger the gap is. And all the RP- have this gap between the woofer and tweeter, including mine I measured it.
They use the exact same factory crossover from the factory. The only difference between the RP-280F and the RP-8000F other than cosmetic is the 8000F tweeter is vented but still very similar to the 280F tweeter.
Danny, thanks so much for this. Yes, you really can’t sensibly do a 2 Way tweeter/woofer/woofer. Only woofer/tweeter/woofer for coincident sound. Curious to know if you found any breakup modes on the midwoofer. Metal cones love to ring don’t they. I see you didn’t implement an LCR notch filter like you did for rp600m stand mounted. What crossover freq are you using in kit and what are slopes? Thanks, keep up the great work.
Yes, those woofers have a hell of a peak up top that rings like a bell. They needed an aggressive notch filter on them to kill it. See measured responses: gr-research.com/Klipsch/klipsch%20RP-8000%20crossover.jpg
It seems like he's just trying to sell kits that you don't even need. The only guy that actually bought it and installed the x over said it barely made an improvement
If you own these speakers you NEED this upgrade. Without it they are a disaster. And I actually I get reports from our customers regarding this upgrade that are overwhelming positive and they are very grateful.
@@dannyrichie9743 Is there any way to read their reviews? I could find only two. One said the difference is huge' the other said there is no noticeable difference. I'm really interested.
@@elduderino1329 Anyone that said there was no noticeable difference didn't implement this upgrade. And you can find feedback in our forum at the Audio Circle.
@@dannyrichie9743 Characterizing a device as a disaster is name calling and strong evidence that the allegation is not true. No "disaster" is as popular among both reviewers and customers as the RP-8000F. Measurements, like statistics, can be manipulated. As such a very popular speaker, it is a prime target for seeds that it can be improved. It may very well have that potential but all the evidence requested by commenters here that would make the claim credible has not been forthcoming.
@@armandorancano6415 Measurement have not been manipulated and they match measurements taken by many others. And drivers out of phase in the crossover region, a deep hole in the response, a tweeter playing louder than the other drivers, further cancellation in the vertical off axis, and significant cabinet wall resonances certainly add up to a disaster in my book. Add in bottom of the barrel parts quality, wiring, and connectors and it is about as bad as it gets. And the upgrade has been reviewed in various places all over the Internet resulting in a lot of orders and very happen customers.
Anything for the rf72 11 and rc 64 11...they are a tad bit fatiguing. Love the sound but have to us eq in my marantz pre/pro to tame them down...very informative videos and I definitely enjoy each and every one ..I thank you for your time👍
I don't know whether such a modification is desirable. A B&W speaker had such a dip, but a reviewer in Audioholic said he could not hear the dip. Correcting the dip in that B&W speaker to a flat curve in one type of measurement will result in emphasized mid in real world domestic listening.
First rule of audio, you can't hear what isn't there. 😉 B&W is known for their odd frequency response, it helps them sell, but it's not uncommon for people to remodel the crossover for day to day listening. 🙂
@@PSA78 There are many ways to scientifically talk about "what isn't there" and "what is there." We cannot say that one type of measurement to be the perfect, absolute, and universal representation of the reality. Big companies like Dynauio, B&W, and Focal have better measuring tools and environments than a youtuber, even if the youtuber is quite special to own an expensive(expensive to a person, but cheap to a big speaker company) Klippel system.
@@azzinny It's not that complicated to measure a frequency response, and if the changes shows up as well as can be heard it's pretty clear. The problem is at low frequencies. B&W is known to have a very forward presence usually, but with some tweaks they do sound good. It comes down to what the purpose of the speakers are and to a degree how they will be placed, and naturally personal preferences.
@@PSA78 The dip in the measured curve and the inaudibility of the dip is not completely within the B&W house sound you mention. You seem to be one of those who convince themselves after looing at a graph. You reject the Audioholic reviewer by your belief that one frequency response curve says all about the speaker: anyone who says differently from your belief from the curve (not from your listening - you will never need listening as you just see a curve) is a fool or a crook. There are people who think differently from you.
Just my 2cents, you should throw a link up to this kit you mention, also it would be nice to see how you installed the new kit. I want to buy the piano black version the last thing I want to do is ruin the finish. It would also help a novice like me understand how big the lift is on your 400.00 kit.
I owe Danny an apology; after he did this review I got a bad case of "don't bash my speaker" and disagreed with him. Sometime after that, I came to realize that my RP-8000s sounded terrible for music, and ended up going to Emotiva. I moved the 8000s to my shop where they sat for quite awhile, then I bought Danny's kit, built the crossovers and did the modifications. The result is a wonderfully balances speaker that I love listening to. Is it for everyone? Probably not, most people probably don't have the skills to build the crossover and do the mods. And frankly, they might be better off to just sell the speakers and buy some that don't suck. But me being the tinkerer I am, I did the mods, and I'm thrilled with how these speakers I once hated now sound.
I have this dip on my rp6000f's. I thought the 8000 had 8" drivers. I hope someone sends in my model. Shipping is a fortune. I wish I found this information sooner. I would've went with the open baffle flat packs for the static x and x voce. I just ordered the rp504c upgrade. Thats a great speaker, but I need to get the mains done...somehow, some way
So, if you don’t already own these speakers, is money better spent somewhere else when factoring their cost and this upgrade? ($1300 or so for a pair including this upgrade.)
Because of these videos, I'm not even going to look at these towers anymore! I had rf82II's and sold them for some usedForte's and did the same with some other towers for some used Heresy speakers. I think these older models get around the issues he's talking about by having a three-way design which makes the acoustic center much much closer. The woofer crosses around 700hz. Now, I'm looking at the RP600m with his upgrades as I think that would be a much better economical choice. I run all my speakers with a sub anyway so don't need the extra bass from the larger cabinet and woofer (which it sounds like do more harm in these models than good).
@@mwahlert Because of their rave review? Notice there aren't any measurements. Also the more you get into this the more you realize you hear the room more than any speaker. With this knowledge, you can treat the crap out of your room and optimize positioning (in most cases most people can't treat an entire room and only have so many options for placement.) Or you can buy speakers with the best response you can find, really concentrating on the off-axis response because your untreated room is going to have a lot of reflections. You'd be better off with those reflections sounding as much like the original source as possible. But, Alas, I am a novice and the more I learn the more I realize I have NO CLUE!
Looks like I missed the second page which has some measurements. Perhaps it's the 1/12 smoothing (I'm not sure how GR smooths his graphs). Here's a discussion about this very topic with some measurements confirming GR research measurements. www.audiosciencereview.com/forum/index.php?threads/video-speaker-measurements-by-danny-richie.8840/page-2
Would you ever test out any _full-range_ speaker drivers? With "whizzer cone" or without, i do not really mind, although I do have a pair of 12" (yes twelve inches) full-rangers from commonsenseaudio which _do_ have whizzer cones. I suspect they are hand-picked parts from a chinese manufacturer. Apart from not going above 18 kHz, they are more than decent. I always thought of the whizzer cone as a kind of _mechanical_ crossover, does that make sense?
Have a pair of Danny's X-LS Encore's to replace a set of Klipsch RP-150M and Canton's (...both I like very much). The X-LS, after kit completion with all the cap upgrades sound phenomenal.
I purchased this RP-8000F kit for my pair of RP-280Fs. The Klipsch crossover is the same for these as well as the RP-8060FA as all three are nearly identical acoustically (the upfiring height speaker on top of the 8060 has its own crossover). There is a slight difference in the tweeter between the 280 and the others as the two newer models have a vented tweeter. Other than that, the woofer drivers and cabinet are the same except for a few mostly cosmetic details on the cabinets. So I finished one speaker and then did side-by-side comparisons between the stock 280F and modified 280F. The difference is not subtle. I would go so far as to say the modded RP-280F sounds less like a Klipsch speaker now! In all loving kindness and respect to Paul W Klipsch, sometimes Klipsch speakers are just unbearably bright. This upgrade tones down that fatiguing glare significantly and adds balance to the tweeter output with no loss of detail. The bass is tighter and the upper midrange is smoother especially on female vocals. Just seems to be overall a less "shouty" speaker and somewhat subdued, in a good way. It sounds like a much more expensive speaker now - does that make sense? I am rather pleased with the new sound and starting to take apart the other speaker to finish this project. I am taking my time and care with this while still "working" from home and it took me several days to do the first speaker. Everything you need is included except for mdf board. It helped me to watch the RP-600 crossover upgrade videos as you can see the entire process demoed and explained. The only instructions provided with the kit was a simple schematic so you are on your own. Take your time scraping out all the fiberfill glued to the inside walls but save it to stuff back in after norez is installed. The crossover part quality is top notch. I mounted the new crossover mdf board onto the vertical braces with screws and hot glue. This board is heavy with several pounds of copper from three large inductors. The original crossover was simply screwed on to the back of the small speaker terminal post insert under the port. Two things I did differently, although the impact is probably minimal and maybe insignificant. I carefully added little pieces of dynamat extreme to only cover the outside of the upper woofer basket spokes as these are stamped steel frames that can ring a bit. Also, I bi-amped with an extra pair of tube connectors simply because there were two extra unused amp channels on the 7.1 receiver for this 5.1 system. I think removing the inductive circuit of the woofers from the output stage of the amp in the receiver driving the tweeter is a good thing and having extra copper (two pair of speaker cables and tube connectors) between the amp and the speakers can't hurt. This will not give any more loudness or power but *maybe* a bit more clarity although I did not test that independently. Your mileage may vary and most experts say this is a waste of time on a speaker like this. So call me a rebel...
Do you brace the cabinet and treat with no-res before measuring the speaker and redesigning the crossover? Or is the no-res and bracing another step to be done that's somewhat independent of the crossover upgrade?
I noticed when too close to the speakers, there is no mid. After setting the speakers up correctly, with enough distance to the speakers, midrange is there. It's just where the high and bass find each other. That is not on 1 meter from the speaker.
The 1 meter measurements and vertical off axis measurements are made to see what the speaker is actually doing and in this case it shows obvious problems. And there is a time domain issue here. However, if instead of fixing the speakers you would rather fix the listener, then please listen with your ear at the floor level. At that level the time arrival of the tweeter verses the woofers will be closer to being in phase and the hole caused by the out of phase cancellation will be nearly gone.
@@joeydelmarsjr.646 there is no doubting.. its a fact. R-280F isn't even in the Referance Premier line.. its just a regular Referance, discontinued at that.. the RP-8000F is Klipsch flagship Referance Premier speaker.. then it goes up to the RF7iii, then Heritage and Pro
How do I fix this problem ,I bought them because everyone said they are good and easy to drive,I have vintage jamo 707 and they sound very good but they need 250 RMS per channel at least I'm going to leave them for music with a basx A2 on another zone,let's hope these 8000 are as good as I heard
@@dannyrichie9743 They share the almost same cabinet, same woofers and crossover as far as I know. Specs same too. Only difference is the RP-280F not having a vented tweeter.
I can't measure that far away without it becoming a room measurement and not a speaker measurement. If I could (like back when I had an anechoic chamber, I had one at our old location) then the phase shift between the drivers would be lessoned slightly and it would look very slightly better.
Hi Danny I’ve only just stumbled onto this clip. So basically all I need to do is buy a seperate law pass filter for the bottom woofer. If I was to do that I’d probably just buy new crossovers for all 3. What would you recommend the ranges to be re frequencies. Awesome work
While this sounds legit, and this guy clearly knows a lot, I just cant hear this. I just demo'd B&W 603 vs Klipsch rf8000 and I liked the Klipsch better in virtually all aspects. Great value in my opinion. I was at 2.5 meters. Can we see the data from a trusted source that is NOT selling a product?
Yes, check out th-cam.com/video/4FmAmlsAa-o/w-d-xo.html This is Audioholics review of several tower speakers. Their measurements of the Klipsch are at 30:25 mark. They have the same shape as the curve Danny is showing, but the 10 dB swing at 1,70 Hz does not occur until about 30 deg off-axis, while I think Danny is saying his measurement was that large on-axis.
mines really loud at 1.5 to 2 khz its a klipsch rp 280fa doby atos to i need it less whiney sounding my backs sound fine live in a small apartment and i just want 1.5 through 2k in the tweeter reduced to where it matches what quality capacitor and resistor coil do i kneed to reduce 1.5 throgh 2k
Why is GR-research having to fix these speakers, it should be the manufacture doing this? What’s wrong with this picture? Selling speakers that can be fix to sound right is not the costumers responsibility. We are not Klipsch’s R&D team or their beta testing monkeys. Apparently the person who is supposed to be listening to the speakers before sales at Klipsch is not doing their job.
@@everss02 What´s your point? They are made in China, after they have been designed in USA by Klipsch. The Chinese factory will make them as Klipsch will tell them to.
They are built to a pricepoint, if they shipped with all the upgrades in them they wouldn't be the price they would be more expensive. Now Klipsch could have designed a crossover with more flat response, but that ain't their style.
@@MTBD80 This is garbage. You can still use the cheap parts with correct values that will give you a similar response to GR Research design at no extra cost. This is poor design. Plain and simple.
This is just almost unbelievable that Klipsh failed so miserably im their design. We might have expectations from Radio Shack, but typically their speakers sound much better this. Disappointing to hear. I think this speaker should have been designed a MTM configuration. Always appreciate Danny's remediations and taking time to explain in details...
I know some ppl say they get better highs or bass or too much highs or not enough bass with the speaker wires they use. Could the hole in the frequency response be fixed with better speaker cables or an Audio Equalizer?
@@dannyrichie9743 what is a time domain issue? OK, I thought the EQ could raise the freq of the "hole" so as to make it match the rest of the other frequencies that is higher... I thought EQ were meant for that. I'm just learning
@@pagepro211 The time domain issue means the waves are arriving out of phase. So they don't sum. So just turning them up in that area doesn't solve the problem.
I tried prototyping this crossover and wasn't that impressed with the results (I managed to find the schematic from pictures posted on the internet). I just did one speaker and put side by side with the original playing a mono track. Using the balance control I could easily switch between the two speakers and the GR-Research one lost its life and energy. It didn't sound like a Klipsch speaker to my ears,. it sounded like just another tower - you pick the brand. I remember when I bought the Klipsch from the dealer they had all the Klipsch range lined up with a B&W tower thrown in . Using remote switching you could switch between speakers and when the B&W was selected you could hear the difference. The B&W sounded lifeless, less engaging in comparison. The GR-Research modified Klipsch reminded me of the B&W! As mentioned by other comments that dip goes once you get to 2 metres or more away from the speaker. I did measure the GR-Research speaker and the frequency response was pretty flat at 1 meter as shown in the video. But these speakers are not designed for near field listening, they are designed for large rooms for 2 metres or more and in that environment they already sound pretty good as is. One thing that GR-Research doesn't mention in his videos is the distortion. These speakers measure very well in their original form. But I doubt if they will measure so well with this revised crossover as the tweeter slope drops from a 24dB 4th order to 6dB Ist order in the new design. That means at lower frequency levels a lot more power is going to the tweeter increasing distortion levels as the crossover frequency is quite low @ 1.5Khz. Crank up the volume to really high levels and the tweeters might give up the ghost as a result! Personally I wouldn't touch it. Yes there are significant improvements to be had by improving the cabinet resonances and using better quality caps and inductors on the crossover (I have done it) but don't use the Gr-Research design. Oh and if the brightness is the thing that annoys you most just increase the tweeter resistor to 4.5 - 5 ohms. An easy change. You don't need to spend 500 bucks to achieve that!
How to improve your listening experience with klipsch: Sell them and get better speakers. I am done with those tinnitus-factory horns. What they have in transient attack is lost in detail /nuance and dimension. They are mid-fi speakers ok for HT. They don't "reveal" they exaggerate. I sold off my Klipsch reference and am never looking back. FWIW: I did the GR research mods. The mods greatly improved on the crappy factory crossover and poor engineering. Still, the speakers have that nasty titanium tweeter. Ever use Klipsch nearfield? It's painful.
I totally agree with you on that. I also chose the German Canton Vento 896DC, which are much more balanced, especially when listening to classical music.
How does one know if their speakers have this issue? I have a pair of RP-250f and would like to know if they have this issue. Are you supposed to be able to hear it?
I used to have a set of RF-83's... same two way design but w/ 3 8" woofers and a 1.75" diaphragm tweeter. My question is about the acoustic center you mentioned. It would seem as though that problem would be even worse with the 83's w/ the center of the 3 woofers being lower than the center of the 2 woofers in the 8000f's.... Is that true, or am I confused? weird if that is the case because the rf-83's were incredible sounding speakers. Spent the last year looking for a decent used set... now considering rf-7 III's or La Scala's as well. Appreciate info or help! Best Regards
I just want to state I have the RP-8000F and just want to say I tested my speakers at 1m like he did and it showed the same hole he showed. I then tested the speakers at 3m which is my listening distance in my home theatre in all 3 front row seats and that same hole was gone. So if you do listen to these speakers at 1m then I agree there is an issue. I just don't want people that might use these at a greater distance to rule them out because of this video, because, in my opinion, they are great for home theatre use and don't need the "upgrade" at that distance.
Thank you for the clarification! I was freaking out from this video, because I just bought them with my hard earned money, but now I calmed down a bit.
@@tonezou3918 Did you like the sound before watching this video? If yes you shouldn't even worry about it. Remember these speakers are for you to enjoy!
@@W4YN0T Yes, I did like it. Sound stage and warmness could be slightly more perfect, but they sound great to me!
@@tonezou3918 There you go, that's all that matters :)
@@tonezou3918 hope you didnt buy them brand new…
I just completed the upgrade kit for my Klipsch RP 8000F's and am blown away by the difference it made! I already thought they sounded good but decided after watching this channel for a while to take the dive and do the upgrade! Danny makes the kit really easy to DYI! So for all the nay sayers and anyone who is skeptical about if parts matter, i am here to tell you that it makes a Huge difference! I can't believe these are even the same speakers! Keep up the good work Danny and thanks for getting everything shipped out quickly!
Update on the upgrade, i am about 40 hours in and everything is really starting to smooth out! The tweeters were a little on the bright side at first but now blend nicely and these speakers have been taken to the next level with this upgrade! I listen to a lot of different music but mostly am a metalhead, especially Thrash Metal! The guitars really pop now! As i said before if you are skeptical don't be! Danny knows what he is talking about! My equipment is as follows, Audio Technica LP 140 XP with an Ortofon 2m Black LVB 250, Project Tube Box Phono Stage with Gold Lion Tubes, Cambridge AXR 100, Audioquest Cables and for digital i use a Brennan B2 run through the built in Dac on the AXR! Thanks again to GR Reseach for the great customer service!
Think it will help my rp8060fa ?
Did you record your upgrade procedures? We want to watch it very much. Or anyone could. Thanks!
I just completed this upgrade on my 280fs after thinking about it for some time. As mentioned before, it shares the same OEM crossover as the 8000F.
This kit is a good amount of work and you will need to give yourself some time, but it rewards you greatly in the end. Good for us hobbyists. It WILL make this a better tower speaker. If you are an audioholic, the difference is big. It brings out the mids, takes the uncomfortable peak off the tweeter, especially when you turn things up, but it does not take away from the detail or clarity of it. Instead it tames it. Holding my ear up to the two woofers I can tell that the bottom woofer now only plays the lows and the top woofer plays mid range.
If you bought this tower and it did not sound as good as you thought it would, this fixes that feeling. You will hear instruments, voices, and other significant details in your music that were left out before. Very pleased with this upgrade.
Did you notice a loss in sparkle from cymbals before the upgrade? And if so did they come back? To me it seems that part of the range is muted slightly as the graph shows. What size board for the crossover? Thanks.
It has two 8 inch woofers.
Measure them...
@@barryr.3541 Idiotic comment. Look up the specs on Klipsch's site. They are the RP8000Fs and I have them and yes, they are 8" dual woofer/midranges
They measure 7"
@@quantumdecoherence1289 They measure 7"
@@mcplutt 7" is the cone and surround size, the frame is 8"
I've got to wonder about the 1m measurement also. I doubt many designs (especially horn loaded designs) would have proper driver integration at such a close distance. I've got JBL K2 S9900's and I sit about 9 ft away, and feel like I could be farther, as if it's the first point that they integrate well, but I've got a small house so that's all my room will allow. I'd bet the 1m measurement shows issues, that wouldn't be issues at normal listening distances. I get your points about not measuring the room response though as well, and why you keep the mic close. Also, I've watched several movies on an RP-8000F Atmos system, that was rebuilt with your crossovers and it did sound great, so I'm not knocking your design, just interested in the effects that the close mic placement might be having on your measurements. Incidentally, I have stood in the Klipsch anechoic chamber with it sealed up. I could hear people talking outside the room, so the door seal wasn't exactly perfect. I also think that Klipsch purposefully designs a dip sometimes between drivers to make them sound more "Detailed". I believe they actually told me that. So take that for what it's worth. I'm a midrange guy, so I don't want any dips in my mids.
I used to own a pair of RF62. A similar model. Never measured anything but I liked the way they sounded. One really wants to follow positioning recommendations like putting them away 0.8 m from side and rear wall and turn em in a little to listener's chair.
I just finish to fix my Klipsch rp280 with your upgrade n I'm very very satisfied the result is so good thank you very much Gene
did you upgrade with this kit for the 8000F ? Cause I am looking for an upgrade for the RP-280F that I have but its not on their website!
Boy. Ive been in a lot of fancy houses with professional systems many times more extensive than my 2500 dollar klipsch setup and id say mine sounds every bit as good for any normal person. Now i will say that im sure there IS a scientific sweer spot or correct sound that can be achievee but I really like the way a klipsch sounds out of the box.
I also have the run of the mill, less expensive r820fs with rp bookshelfs and center and spl120 sub.
Yeah and an EQ will help compensate for any midrange drop. I’ve certainly never noticed it when listening. If anything they seem to have a bump to my ears but everybody hears differently.
That response chart looks like how I set my EQ, scooping out the mids a bit. Mine sound great. But, to be honest, I would actually like to pull down a wider Q around that point.
Never let a graph tell you what you enjoy. Home theater is meant yo be fun. I bet of this guy’s customers never even knew they didn’t like their speakers until they saw this.
Not true. I found this video while googling Klipsch rp8000f dip in upper midrange
Like I said in another comment: I want an EQ, so I can scoop out the mids even more. When I was 16, my car EQ had the slides in the classic V pattern. For the last 40 years, I have found that my EQs have started flat, but by a month later, that EQ looks like a V. It is just what I prefer, even when trying to stay flat. So, to say this about my RP8000Fs, I'd have to agree with Klipsch's design. But I love knowledge, and I appreciate the commentary, regardless.
Edit: This isn't what Klipsch's specs look like. However, I acknowledge that marketing can make anything look good by adjusting chart detail.
I really like your business model, offering well designed kits to improve speakers we already own. Interesting to listen to you as well. It probably would help your sales to have a web page with a list of all the speakers you have designed with the kit price listed and being able to add that to a cart and order it right on the site. I am also curious to know if you have any recommendations of great value for the money speakers that sound great with your upgrades.
The business model is genius. He "upgrades" the most commonly bought brand in the US, in the most common price range that would include consumers that would likely purchase the kit. He clearly knows what hes talking about and displays the information clearly.
The flip side to this is that after watching 100s of videos and reviews about certain Klipsch speakers that would give them a "worth buying" rating, this man can make me change my opinion on buying entirely. Its frusterating to be honest. He presents the data and there is no arguing about it. He is correct. Without any context on cost or comparisons to other speakers in the same range, by the end of the video your left with the idea that the speaker is shit UNLESS you pay an additional 350 for kit. In which case, then you would be in an entirely different price category.
Overall i appreciate the info. BUT I am not buying the 8000s and the overwhelming factor being this video. In turn i will not be buying a kit from you either.
I dont expect you to lie about the numbers but i suggest you find another sub $1000 tower or $300 bookshelf and pick it apart just the same and i that point, I a consumer, can look at both and make a purchase I feel good about and THEN i can go "Maybe now lets see what the kit can do?" OR lets see what he says about the $1350 step up and maybe i just buy that?
R may have spoken woofer size being incorrect but he knows speaker technology and his systems sing well above their cost.
Yeah I agree not talking bad about this guy very intelligent knows what he's doing but the RP 8000 f they have 8 in drivers. ✌️
If there is an audible improvement I would go for it. I wish I could find reviews about this mod. Until then I remain skeptical. I see the gap in the middle range but I'm not sure how it translates into the listening experience. I've ordered these speakers and hopefully they will arrive in a week.
how is it now?
is it great?
@@hahdanghongha7810 They sound about as clear as my old B&W 805s but bigger, more spacious. It still needs some more time to break in. At this point I'm 90% sure that I'll keep them. I have a subwoofer but I don't feel the need to use it with these speakers. However I'm not a huge fan of how they look.
@@elduderino1329 I'm considering the same speakers. Any update yet? Is the hole in the middle frequencies disturbing when listening to music?
@@gejdfr05 I have a set and they sound wonderful to me....I don't think they were design to be flat, they have color like all Klip's...it about the music not the freq, respond at X range, they have the classic Big Klips sound
@@level600a Utimately, it ends up being about personal preference. I'm looking for speakers with a flat responce. I think Klipsch look ugly (those copper colored cones) and sound shouty and boomy. No doubt some are 'better' than others but I've yet to hear any I liked.
That 'before' response curve would make Klipsch's spec sheet a total lie by a very large margin. Kinda hard to believe but not impossible I suppose. Just seems extraordinary that they would let them go like that.
With this big of a waveguide for the tweeter, they should have designed it with a d'appolito arrangement. That way the accoustic center would be much more manageable.
Does it bother anyone else that this guys doesn't know the RP-8000F has 8 inch woofers?
I'm not that bothered by it. Half the time I call my kids by the wrong name.
What is interesting is not hearing from more people who have done the modification on their speakers and want to tell about their experience with it.
@@armandorancano6415 I hear from them every day.
@@dannyrichie9743 Danny, I'm someone who has replaced stock crossover parts on Magnepans and know the amazing improvement just doing that can bring about. I don't doubt your mod can have a positive impact on the 8000 SQ.
However, to gain credibility it's not enough that you talk about what other people say to you privately. Those folks should be able to share their stories with the rest of us who contemplate an improvement. Maybe I've missed some reading, but people who feel good about something are typically very eager to share their experience directly.
Exactly!
I've read another review on the 8000f from audioholics who did frequency response testing. Their charts show the speakers to be almost completely neutral throughout the entire range. Very different than this measurement with such a massive dip in the midrange. Just curious to understand how they can have such different results?
I saw that one also, because I have the older model RP 280f's. Very disappointed in your measurements compared to Audioholics measurements on RP8000f. Why such a difference in measurements ?
The reviewer at Audioholics confirmed that he was able to get the same measurements as well, but they choose not to publish them showing the dipped area.
@@dannyrichie9743 I figure you can make any speaker show a different frequency response depending on the room and equipment it's tested with. The audioholics guys show their test was done outdoors to eliminate echo since they don't have an anechoic room. I guess my main point is how do we know who's right, and whether or not these modifications will actually work for us?
@@richelh First of all, my measurements use a gated time window. So there are no room reflections or echo in the response. And the reviewer reported (on the discussion here on TH-cam) that he was able to get those same measurements. There is no he's right or I'm right. The measurements can both be an accurate representation from the point they were measured from. I could have moved out further away and below tweeter axis where the drivers time arrival was a little better, but to find an ideal response is not the point. It is to get an overview of the response on axis and off axis as to have a better idea of what the room response will be, how the time arrival of the drivers are, and how that will effect the imagining and sound stage. And in this case the drivers were not reaching one another in range or phase. And they had an uneven response on and off axis. There is no debate of that. It's a fact. And the modifications are a HUGE improvement. Not only are all of those areas addressed and significantly improved, but the quality of the parts is a HUGE improvement as well. The performance jump across the board takes them WAY beyond where they were from the factory, and those that have already implemented the upgrade confirm that as well.
Thanks for making the kit available. Your kit improved my RP8000F's so much!
Hello GR-Research, your video had me curious as i was on the fence of buying these speakers a while ago. Since I'm not an audio expert, i figured the best way to validate your claims about the flaws of this speaker would be to reach out to Klipsch's support and allow them to counter your arguments. Finally, one month later i receive a reply and guess what the say?
"I suggest disregarding that video. The RP-8000F are great speakers!" ...
No. Klipsch will defend their under-engineered mid-fi products. Never go by a manufacturers claims. I've modded Klipsch for 20 years with Bob Crites and later GR research methods. The mods radically improved the speakers in a quantifiable, measurable way. DO NOT let anyone tell you factory klipsch are perfect as is. They are mid-fi....period.
They sound very convincing. Ha, ha, ha...
@Losttouchjs You want the fix for free?
I haven’t seen that speaker measure that bad anywhere else
I have had a LOT of people confirm the same measurements. So I did not get an odd one.
Well if you measure the speaker, then zoom out the flawed part, then it will also look really bad.
I can show you the measurements from a German audio magazine. The results are nearly the same.
@@vincentobrien5939 Link please.
A simple survey by Danny of the satisfaction of his customers with the mod would give us valuable information. If I was Danny, that's what I would do. Saying A LOT means nothing.
Everyone on the klipsch Facebook page hates you for this, im trying to explain to them that you do a good service and weren't bashing klipsch and that you know what you are talking about but I am not articulate enough to defend you, can you make a a video explaining how you started and how you are helping the average consumer. Please I love your video and I want to stand up for you!
Thank you.
Is the price for each speaker or for the pair?
Picked up a pair of these for $600 in 2024. I listen at 3 meters. Even on my 30 watt Eico tubes amps, they have something missing in the mid range. Is this the fix?
I just ordered the kit. I hear (or actually don't hear) the hole. It's real. I want more mids.
Thanks for the work and dedication,sir.
I did kind of solve this problem otherwise…
I did split behind the speaker that crossover bridge and connected two inputs on two outputs of my receiver. Now crossover should be kind of disabled?! I did measure with audyssey and middle drop is mostly gone but it is still there in 1-2db variation.
The question would be: is it a very bad idea to give this task to a receiver?
Is there a simple list on your website of all the speakers you have upgraded?
I got the rp 5000f , love them, But great stuff here. You don't deserve the bs people are giving here.
Great idea you have looking at pre made speakers, and see how they can be improved.
I am a bit pissed that klipsch has such a thing in there and it isn't fixed a bit more.
But i am not a hardcore audiophile and love how they sound. Although i dont know muchh better, my previous ones where wharfedales.
Hope klipsch will see this video and fix it to some extend. Keep doing what you are doing. Cheers.
curious about doing this to mine, but honestly they sound very good to me. I dont notice any dip or null in sound at all. But i also do a room correction and have subs. As a honest businessman, is this really worth it? Am i going to be "wowed"?? i was pretty wowed and still am listening to these speakers
I have read other reviews on this speaker and they rate it very well. I don't understand why your review is so much different. Thanks for a different point of view.
I can't speak for anyone else. I try to just shoot straight and tell it like it is. The response issues have been confirmed by others as well. There is certainly a hole in the response. There is a time domain issue there too. Cabinets are lightly made and need No Rez badly. The parts quality on them was very poor. They were kind of a disaster. I am not really sure how anyone else would thing otherwise.
One bad review based on measurements, not listening, and so many people are ready to crucify this speaker. If the measured hole was a problem, Best Buy would not be running out of the model nationally. Or is the fact that Best Buy sells it proof that the 8000 is not a serious audiophile speaker?
There is no doubt that most speakers can be improved with better parts. Would the SQ difference be significant? Would we be willing to pay a higher price?
I have no doubt Danny is honest in his assessment. I am an avid live concert goer and also have no doubt that what the RP-8000F offers is a pretty realistic presentation of well-recorded live performances.
I could have sworn Best Buy sells the Refernece line and not the Reference Premier line? I like the sound of my rp160s, they ain't half bad. I would love to hear one of Danny's designs in person!
Plus I have to ask how did he measure these? What method was used.
I have a pair of RP-8000Fs and they are my first Klipsch speakers. I bought them mostly due to the mostly positive reviews on TH-cam and other sources. At first I was really impressed since I could hear sounds in songs I had never heard before. Then I started to notice that certain types of music sounds dramatically better than others. Classical, certain types of rock like Steely Dan, Pink Floyd etc sounded great. Then I started to notice that some types of music didn't sound very good at all like hard rock and heavy metal. There were guitar parts and some vocals that seem to be missing in certain ranges. If I wasn't very familiar with the music I may not have noticed but it started to bother me and I found myself only listening to music that sounded the best with the speakers. Then I watched this video a while ago and It seemed like he hit the nail on the head. I think that range where the drop off is is the range that is missing and bothers me. I am considering doing the upgrade but I just don't know about pulling apart my $ 1500 set of speakers and messing around with them. Especially if I mess them up my wife would never let me live it down.
Damn $1500 speakers with the same weakness, what a shame.
You could do it. Perhaps build the crossovers first, then that "hard part" is done.
I have a set of Ref. IV RF-82, RC-62, RS-52 and I love the towers for critical stereo listening and as well, movies.. but, my center seems to have a fault in the x-over. It rings ear-piercingly so at certain voice tones.
I ordered a set of RP-504c II and RP-8000f II so I would like to entertain these fixes for my center, and might as well match the towers as well.
I will try to upload some findings to my channel. Thanks for all the years of efforts Danny. I finally have a valid case to try this out.
i just ordered these friday. i seen many reviews from audiophiles that had positive reviews, the only gripes is, large and heavy.
Can you let me know that is improving on rp-8000f ?
@@lamluu6822 hi, i didnt have those mods done to mine, they are factory stock n sound great
So you don’t have as your own, how can you know that sound great ? Please help me an ideal ! Thank you very much and have a good weekend
And how can I order that kit ?
@@lamluu6822 go to the webshop
Curious, how is power handling effected and a video showing the install would be helpful... Thanks
Power handling is not effected. I did do a step by step on the RP600M. The steps are all the same, just the circuit is different.
I was going to ask if ended up with a 2.5 way so thanks for answering that in the first 5 minutes
Any kit for Klipsch R 820F ?
IYO I have the RF-35 and RF-82II and they sound Muddy we all know about the tweeters to bright.Why did the smaller RF-42II Sound so good the the Bigger ones sound so Muddy?
I haven't worked on those models.
Yeah, just for the higher quality parts alone. I'm probably going to do this upgrade. Thinks gr, research,
First of all the drivers are 8" not 6.5". Secondly you measure at 1 meter. Nobody listens to music at 1 meter. Great range if one wants to measure sensitivity. Most people listen at 3 to 4 meters. At that distance their is no hole. I would kindly suggest you re-test at 3 meters (real world listening distance) and you will see)hear no hole. The speakers don't need any further upward tilt either. Toe in is dependent on distance as such this is variable.
Interesting....A LOT of reviews on this particular speaker are positive, including one from the guys at Audioholics. In fact, this is the first negative review I’ve seen on them. Who do I trust, the one guy who doesn’t even know the size of the woofers who says the design is broken and he “fixed” it or everyone else?
He's approaching it from an electrical engineer / audiophile perspective which may or may not be what everyone wants. All he was trying to do was to create a flat response output which is what audiophiles desire but may not sound the most pleasant depending on what type of music you listen to.
Many "popular" speakers/headphones are focused on creating "happy face waveforms" where there is a peak on the bottom and high and drop in the mid which is EXACTLY what Klipsch did here because many people want lots of bass and treble but don't care as much on the mid. He's basically boosting the mid with his upgraded circuit which may not sound as pleasant DEPENDING on the music content. Probably sounds AMAZING for classical but maybe not so great for rock/hip-hop/electronic.
@@Jedi2155 - Yup. Most folks have an EQ or some kind of room correction and you can adjust that if the sound is not to your liking.
@@Jedi2155 you're completely right so not trying to bash. Just this speaker isn't anything close to the "happy face" this is just a completely wrong design from Klipsh. I've designed a few speakers myself and tried flat and smily responses en found I enjoy flat ish with a 1 to 2 dB drop from 200 orso Hz to the top end.
@@Jedi2155 You are 500 percent right.All Klipsch reference speakers Danny tests have the same response.Klipsch wants these speakers to sound like the bass and treble controls on the amplifier are turned up, and that sound is immensely popular as are the speakers.I used to up the same controls when I got into hi fi in the 1970's.Klipsch has killed two birds with one stone, got the sound they want while saving money on a lousy crossover.It is surprising how many self styled audiophile reviewers worship these speakers.Danny has done the right thing by flattening the frequency response, addressing the phase anomalies and improving the spectral plot.Now if one wants to alter the response to the bass up- treble up shape use an equaliser .I am sure details,imaging the soundstage will still be better thanbefore.
What speakers 🔊 out of the box would you recommend for the best highs, mids, and lows? I want to make the purchase and never look back to regret it.
If he told you that, he couldn’t sell you an upgrade kit, with a bonus bottle of snake oil.
I just ordered 2 RP-280F front drivers as well as 1 RP-504C Center and 2 RP -502s Surrounds. They have not arrived yet, should be by Mon Nov 2 2020. Are there issues with these that you know of?
So i bought these 2 months ago and have them hooked up to a good receiver a nice dac nd a beautiful amp and i have the speakers about 2 feet from the wall and let me tell you nothing but perfection. The sound is great its everything i wanted without messing with anything. Just use some good front end components and you will not be disappointed. If you use poor components then you'll get poor sound. But for me no problems and too buy anything else would be a waste of my money.
If you are happy at level one then stay there.
One day you will wake up wondering if they actually could be improved :-)
@@dannyrichie9743 Wow. That was actually a dick thing to say.
I'm beginning to wonder if Klipsch is on to something here. Seems that a lot of their speakers that Danny look at have the V shape dip in response curve. I don't know about you, but ever since I was a kid whenever I get my hands on a stereo that has an equalizer I always set the EQ to look just like a V curve, we love to turn up the bass and treble and tune down the mids.
If it was intentional then we would just see it as an amplitude variation. Unfortunately it was caused from drivers not being in phase as well. No one does that on purpose.
A "BBC dip" is very different in shape as they are intentional.
The cymbals have no sparkle at all. Noticed it from the beginning. The rest of the spectrum sounds phenomenal though.
This is now a 4 year old video, is it safe to say the newer model RP-8000F II's they have improved this issue?
Are you talking about the RP6000f or RP8000f as Rp 8000f is 8”
RP8000F
I have a pair of the RP6000f. I personally think they sound good but this is my first set of floor standing speakers.
I have the RP-5000f and they sound Amazing, I bet your sound Amazing to. so you can leave it there. The stock Klipsch are still Really Good speakers and the Cross over are still Very good and better than most speakers out there. the Tweeter are Amazing (I still turn down the treble a lot) and they look Amazing and they Rock out. (stock)
But all speaker can be improved and if you go into Danny level than your in the Big leagues and he will rip a part any speakers & He also can take your speakers into another level. it appears that the farther away the lower woofer is from the tweether the bigger the gap is. And all the RP- have this gap between the woofer and tweeter, including mine I measured it.
I thought it was my imagination when it sounded like the music was softer in that exact region.
Can this be applied to RP-280FA? It is very much similar to the RP-8000F
They use the exact same factory crossover from the factory. The only difference between the RP-280F and the RP-8000F other than cosmetic is the 8000F tweeter is vented but still very similar to the 280F tweeter.
I have the RP-280F, even more similar.
I would totally get a kit like this for the RP 6000F's. Do you think this one would work for those?
No, that is a different model.
Someone needs to ship a RP-6000f or RP-260f (they use same crossover) to him. Maybe we can crowd fund one those to him!
@@zephxiii Someone did :-)
@@mcplutt aw snaps thanks! Finally!
Danny, thanks so much for this. Yes, you really can’t sensibly do a 2 Way tweeter/woofer/woofer. Only woofer/tweeter/woofer for coincident sound. Curious to know if you found any breakup modes on the midwoofer. Metal cones love to ring don’t they. I see you didn’t implement an LCR notch filter like you did for rp600m stand mounted. What crossover freq are you using in kit and what are slopes? Thanks, keep up the great work.
Yes, those woofers have a hell of a peak up top that rings like a bell. They needed an aggressive notch filter on them to kill it.
See measured responses: gr-research.com/Klipsch/klipsch%20RP-8000%20crossover.jpg
It seems like he's just trying to sell kits that you don't even need. The only guy that actually bought it and installed the x over said it barely made an improvement
If you own these speakers you NEED this upgrade. Without it they are a disaster. And I actually I get reports from our customers regarding this upgrade that are overwhelming positive and they are very grateful.
@@dannyrichie9743 Is there any way to read their reviews? I could find only two. One said the difference is huge' the other said there is no noticeable difference. I'm really interested.
@@elduderino1329 Anyone that said there was no noticeable difference didn't implement this upgrade. And you can find feedback in our forum at the Audio Circle.
@@dannyrichie9743 Characterizing a device as a disaster is name calling and strong evidence that the allegation is not true. No "disaster" is as popular among both reviewers and customers as the RP-8000F. Measurements, like statistics, can be manipulated. As such a very popular speaker, it is a prime target for seeds that it can be improved. It may very well have that potential but all the evidence requested by commenters here that would make the claim credible has not been forthcoming.
@@armandorancano6415 Measurement have not been manipulated and they match measurements taken by many others. And drivers out of phase in the crossover region, a deep hole in the response, a tweeter playing louder than the other drivers, further cancellation in the vertical off axis, and significant cabinet wall resonances certainly add up to a disaster in my book. Add in bottom of the barrel parts quality, wiring, and connectors and it is about as bad as it gets. And the upgrade has been reviewed in various places all over the Internet resulting in a lot of orders and very happen customers.
Anything for the rf72 11 and rc 64 11...they are a tad bit fatiguing. Love the sound but have to us eq in my marantz pre/pro to tame them down...very informative videos and I definitely enjoy each and every one ..I thank you for your time👍
Are you still making this kit. Please give me a way to contact you. Thanks
very very educational material right there ...thank you
I don't know whether such a modification is desirable. A B&W speaker had such a dip, but a reviewer in Audioholic said he could not hear the dip. Correcting the dip in that B&W speaker to a flat curve in one type of measurement will result in emphasized mid in real world domestic listening.
First rule of audio, you can't hear what isn't there. 😉
B&W is known for their odd frequency response, it helps them sell, but it's not uncommon for people to remodel the crossover for day to day listening. 🙂
@@PSA78 I think the reviewer at Audioholic has much experience with non-B&W speakers and live music.
@@PSA78 There are many ways to scientifically talk about "what isn't there" and "what is there." We cannot say that one type of measurement to be the perfect, absolute, and universal representation of the reality. Big companies like Dynauio, B&W, and Focal have better measuring tools and environments than a youtuber, even if the youtuber is quite special to own an expensive(expensive to a person, but cheap to a big speaker company) Klippel system.
@@azzinny It's not that complicated to measure a frequency response, and if the changes shows up as well as can be heard it's pretty clear. The problem is at low frequencies.
B&W is known to have a very forward presence usually, but with some tweaks they do sound good. It comes down to what the purpose of the speakers are and to a degree how they will be placed, and naturally personal preferences.
@@PSA78 The dip in the measured curve and the inaudibility of the dip is not completely within the B&W house sound you mention. You seem to be one of those who convince themselves after looing at a graph. You reject the Audioholic reviewer by your belief that one frequency response curve says all about the speaker: anyone who says differently from your belief from the curve (not from your listening - you will never need listening as you just see a curve) is a fool or a crook. There are people who think differently from you.
Just my 2cents, you should throw a link up to this kit you mention, also it would be nice to see how you installed the new kit. I want to buy the piano black version the last thing I want to do is ruin the finish. It would also help a novice like me understand how big the lift is on your 400.00 kit.
Great information as always Danny and thanks!
I owe Danny an apology; after he did this review I got a bad case of "don't bash my speaker" and disagreed with him. Sometime after that, I came to realize that my RP-8000s sounded terrible for music, and ended up going to Emotiva. I moved the 8000s to my shop where they sat for quite awhile, then I bought Danny's kit, built the crossovers and did the modifications. The result is a wonderfully balances speaker that I love listening to. Is it for everyone? Probably not, most people probably don't have the skills to build the crossover and do the mods. And frankly, they might be better off to just sell the speakers and buy some that don't suck. But me being the tinkerer I am, I did the mods, and I'm thrilled with how these speakers I once hated now sound.
What environment did you measure the speakers in?
I am measuring with a gated time window. So there is no other environmental impact.
I have this dip on my rp6000f's. I thought the 8000 had 8" drivers.
I hope someone sends in my model. Shipping is a fortune. I wish I found this information sooner. I would've went with the open baffle flat packs for the static x and x voce.
I just ordered the rp504c upgrade. Thats a great speaker, but I need to get the mains done...somehow, some way
The 8000f does have dual 8" drivers. He was just mistaken, from memory
Would love to see before and after schematics…
How good is the upgrade iz there a sound test out there
What are the crossover points for the new 2.5 way crossover? 500 & 1,500hz?
So, if you don’t already own these speakers, is money better spent somewhere else when factoring their cost and this upgrade? ($1300 or so for a pair including this upgrade.)
Because of these videos, I'm not even going to look at these towers anymore! I had rf82II's and sold them for some usedForte's and did the same with some other towers for some used Heresy speakers. I think these older models get around the issues he's talking about by having a three-way design which makes the acoustic center much much closer. The woofer crosses around 700hz. Now, I'm looking at the RP600m with his upgrades as I think that would be a much better economical choice. I run all my speakers with a sub anyway so don't need the extra bass from the larger cabinet and woofer (which it sounds like do more harm in these models than good).
@@NakeanWickliff I’m perplexed, because www.audioholics.com/tower-speaker-reviews/klipsch-rp-8000f
@@mwahlert Because of their rave review? Notice there aren't any measurements.
Also the more you get into this the more you realize you hear the room more than any speaker. With this knowledge, you can treat the crap out of your room and optimize positioning (in most cases most people can't treat an entire room and only have so many options for placement.) Or you can buy speakers with the best response you can find, really concentrating on the off-axis response because your untreated room is going to have a lot of reflections. You'd be better off with those reflections sounding as much like the original source as possible. But, Alas, I am a novice and the more I learn the more I realize I have NO CLUE!
Looks like I missed the second page which has some measurements. Perhaps it's the 1/12 smoothing (I'm not sure how GR smooths his graphs).
Here's a discussion about this very topic with some measurements confirming GR research measurements.
www.audiosciencereview.com/forum/index.php?threads/video-speaker-measurements-by-danny-richie.8840/page-2
Are there any drawbacks to your improvements?
It will be great to do a sound demo before and after the upgrade.
Ron Brenay did that with the RP-600M model.
Impressive work, thanks! :)
Have you tested and built a kit for the RP-6000F?
I have not.
How hard is this to install? Is soldering required?
Thanks, Bob
So will this help with all around or are we just talking surround sound applications only. New to this, but I'd like to have the best sound.
Would you ever test out any _full-range_ speaker drivers? With "whizzer cone" or without, i do not really mind, although I do have a pair of 12" (yes twelve inches) full-rangers from commonsenseaudio which _do_ have whizzer cones. I suspect they are hand-picked parts from a chinese manufacturer. Apart from not going above 18 kHz, they are more than decent. I always thought of the whizzer cone as a kind of _mechanical_ crossover, does that make sense?
Have a pair of Danny's X-LS Encore's to replace a set of Klipsch RP-150M and Canton's (...both I like very much). The X-LS, after kit completion with all the cap upgrades sound phenomenal.
Will this work on the older Klipsch RP280f speakers and what does this kit cost.
I purchased this RP-8000F kit for my pair of RP-280Fs. The Klipsch crossover is the same for these as well as the RP-8060FA as all three are nearly identical acoustically (the upfiring height speaker on top of the 8060 has its own crossover). There is a slight difference in the tweeter between the 280 and the others as the two newer models have a vented tweeter. Other than that, the woofer drivers and cabinet are the same except for a few mostly cosmetic details on the cabinets.
So I finished one speaker and then did side-by-side comparisons between the stock 280F and modified 280F. The difference is not subtle. I would go so far as to say the modded RP-280F sounds less like a Klipsch speaker now! In all loving kindness and respect to Paul W Klipsch, sometimes Klipsch speakers are just unbearably bright. This upgrade tones down that fatiguing glare significantly and adds balance to the tweeter output with no loss of detail. The bass is tighter and the upper midrange is smoother especially on female vocals. Just seems to be overall a less "shouty" speaker and somewhat subdued, in a good way. It sounds like a much more expensive speaker now - does that make sense? I am rather pleased with the new sound and starting to take apart the other speaker to finish this project. I am taking my time and care with this while still "working" from home and it took me several days to do the first speaker. Everything you need is included except for mdf board. It helped me to watch the RP-600 crossover upgrade videos as you can see the entire process demoed and explained. The only instructions provided with the kit was a simple schematic so you are on your own. Take your time scraping out all the fiberfill glued to the inside walls but save it to stuff back in after norez is installed. The crossover part quality is top notch. I mounted the new crossover mdf board onto the vertical braces with screws and hot glue. This board is heavy with several pounds of copper from three large inductors. The original crossover was simply screwed on to the back of the small speaker terminal post insert under the port.
Two things I did differently, although the impact is probably minimal and maybe insignificant. I carefully added little pieces of dynamat extreme to only cover the outside of the upper woofer basket spokes as these are stamped steel frames that can ring a bit. Also, I bi-amped with an extra pair of tube connectors simply because there were two extra unused amp channels on the 7.1 receiver for this 5.1 system. I think removing the inductive circuit of the woofers from the output stage of the amp in the receiver driving the tweeter is a good thing and having extra copper (two pair of speaker cables and tube connectors) between the amp and the speakers can't hurt. This will not give any more loudness or power but *maybe* a bit more clarity although I did not test that independently. Your mileage may vary and most experts say this is a waste of time on a speaker like this. So call me a rebel...
@@easyrider2020 My plan is to use acrylic sheet for the boards. I have the RP-280F's too.
Do you brace the cabinet and treat with no-res before measuring the speaker and redesigning the crossover? Or is the no-res and bracing another step to be done that's somewhat independent of the crossover upgrade?
No Rez or bracing can be done independently of the crossover upgrade.
I noticed when too close to the speakers, there is no mid. After setting the speakers up correctly, with enough distance to the speakers, midrange is there. It's just where the high and bass find each other. That is not on 1 meter from the speaker.
The 1 meter measurements and vertical off axis measurements are made to see what the speaker is actually doing and in this case it shows obvious problems. And there is a time domain issue here. However, if instead of fixing the speakers you would rather fix the listener, then please listen with your ear at the floor level. At that level the time arrival of the tweeter verses the woofers will be closer to being in phase and the hole caused by the out of phase cancellation will be nearly gone.
how much better is the r-280f vs the rp8000f?
The RP-8000 is much better than the 280's
@@BonnevilleNut i doubt that. Most ppl i spoke with say rp8000f is a step down
@@joeydelmarsjr.646 there is no doubting.. its a fact. R-280F isn't even in the Referance Premier line.. its just a regular Referance, discontinued at that.. the RP-8000F is Klipsch flagship Referance Premier speaker.. then it goes up to the RF7iii, then Heritage and Pro
@@BonnevilleNut woops sorry i meant rp280f
@@joeydelmarsjr.646 oh gotcha.. the RP-8000F uses the new ported tweeter that is superior to the tweeter on the RP-280F
How do I fix this problem ,I bought them because everyone said they are good and easy to drive,I have vintage jamo 707 and they sound very good but they need 250 RMS per channel at least I'm going to leave them for music with a basx A2 on another zone,let's hope these 8000 are as good as I heard
Would this be applicable to the RP-280F as well?
I don't know. I have not measured and tested that model.
@@dannyrichie9743 apparently they share the same crossover.
The RP8000F has a vented tweeter the RP280F does not have a vented tweeter.
@@dannyrichie9743 They share the almost same cabinet, same woofers and crossover as far as I know. Specs same too. Only difference is the RP-280F not having a vented tweeter.
Do the kit come with detailed instructions on how to upgrade the crossover and install it?
It comes with everything you need minus a small board to mount it all on.
I own a pair of Klipsch RP-280FA. Do you believe same sound curve dip problem present with them? Would this mod help improve the sound?
If you do measurements not at 1m but at listening position, say at 3m, how the measurements will appear using the stock crossover?
I can't measure that far away without it becoming a room measurement and not a speaker measurement. If I could (like back when I had an anechoic chamber, I had one at our old location) then the phase shift between the drivers would be lessoned slightly and it would look very slightly better.
Does this kit work with RP-6000F?
What's an affordable speaker that you've tested and found it needed little to any adjustment?
See what we offer on our website.
Hi Danny I’ve only just stumbled onto this clip. So basically all I need to do is buy a seperate law pass filter for the bottom woofer. If I was to do that I’d probably just buy new crossovers for all 3. What would you recommend the ranges to be re frequencies. Awesome work
You'll need more than a new bottom woofer network. I've made this one as easy as I can. Just buy the upgrade kit.
Thanks for these very informative videos. I don't understand why there is so much hate in the comments.
Any chance you will be reviewing the RP-6000F? Do you have a crossover available for the RP-6000F?
I have not worked on that model.
While this sounds legit, and this guy clearly knows a lot, I just cant hear this. I just demo'd B&W 603 vs Klipsch rf8000 and I liked the Klipsch better in virtually all aspects. Great value in my opinion. I was at 2.5 meters. Can we see the data from a trusted source that is NOT selling a product?
Yes, check out th-cam.com/video/4FmAmlsAa-o/w-d-xo.html
This is Audioholics review of several tower speakers. Their measurements of the Klipsch are at 30:25 mark. They have the same shape as the curve Danny is showing, but the 10 dB swing at 1,70 Hz does not occur until about 30 deg off-axis, while I think Danny is saying his measurement was that large on-axis.
mines really loud at 1.5 to 2 khz its a klipsch rp 280fa doby atos to i need it less whiney sounding my backs sound fine live in a small apartment and i just want 1.5 through 2k in the tweeter reduced to where it matches what quality capacitor and resistor coil do i kneed to reduce 1.5 throgh 2k
can you make one for me is a dip at them why those frequencys sound loud too me because its loud at them not quiet i thought dip makes them quieter
Have you evaluated the SVS Prime Pinnacle yet? Just ran across your site, nice job and would appreciate your thoughts on the SVS Prime Pinnacles.
I am working on some of their Ultra models now.
Hi,do you have a kit for Polk audio RTI A9, thanks from Australia
What are you using to measure the levels across the frequencies? I’d like to test my speakers. Thanks!
Why is GR-research having to fix these speakers, it should be the manufacture doing this? What’s wrong with this picture? Selling speakers that can be fix to sound right is not the costumers responsibility. We are not Klipsch’s R&D team or their beta testing monkeys. Apparently the person who is supposed to be listening to the speakers before sales at Klipsch is not doing their job.
these are the made in china grade Klipsch
@@everss02 What´s your point? They are made in China, after they have been designed in USA by Klipsch. The Chinese factory will make them as Klipsch will tell them to.
They are built to a pricepoint, if they shipped with all the upgrades in them they wouldn't be the price they would be more expensive. Now Klipsch could have designed a crossover with more flat response, but that ain't their style.
@@MTBD80 This is garbage. You can still use the cheap parts with correct values that will give you a similar response to GR Research design at no extra cost. This is poor design. Plain and simple.
@@everss02 so is an iphone. Or certain boeing composite wing components. This is a design problem, not a manufacturing problem.
This is just almost unbelievable that Klipsh failed so miserably im their design. We might have expectations from Radio Shack, but typically their speakers sound much better this. Disappointing to hear. I think this speaker should have been designed a MTM configuration. Always appreciate Danny's remediations and taking time to explain in details...
I know some ppl say they get better highs or bass or too much highs or not enough bass with the speaker wires they use. Could the hole in the frequency response be fixed with better speaker cables or an Audio Equalizer?
No, you can't fix a time domain issue with cables or an EQ.
@@dannyrichie9743 what is a time domain issue? OK, I thought the EQ could raise the freq of the "hole" so as to make it match the rest of the other frequencies that is higher... I thought EQ were meant for that. I'm just learning
@@pagepro211 The time domain issue means the waves are arriving out of phase. So they don't sum. So just turning them up in that area doesn't solve the problem.
@@pagepro211 expensive speakers cable is a scam 90% of the time.
Just throwing this out there, but I can't be the only one that sees the resemblance between the model number and "ripoff"
does this apply to the rp8000?
I tried prototyping this crossover and wasn't that impressed with the results (I managed to find the schematic from pictures posted on the internet).
I just did one speaker and put side by side with the original playing a mono track. Using the balance control I could easily switch between the two speakers and the GR-Research one lost its life and energy. It didn't sound like a Klipsch speaker to my ears,. it sounded like just another tower - you pick the brand. I remember when I bought the Klipsch from the dealer they had all the Klipsch range lined up with a B&W tower thrown in . Using remote switching you could switch between speakers and when the B&W was selected you could hear the difference. The B&W sounded lifeless, less engaging in comparison. The GR-Research modified Klipsch reminded me of the B&W!
As mentioned by other comments that dip goes once you get to 2 metres or more away from the speaker. I did measure the GR-Research speaker and the frequency response was pretty flat at 1 meter as shown in the video. But these speakers are not designed for near field listening, they are designed for large rooms for 2 metres or more and in that environment they already sound pretty good as is.
One thing that GR-Research doesn't mention in his videos is the distortion. These speakers measure very well in their original form. But I doubt if they will measure so well with this revised crossover as the tweeter slope drops from a 24dB 4th order to 6dB Ist order in the new design. That means at lower frequency levels a lot more power is going to the tweeter increasing distortion levels as the crossover frequency is quite low @ 1.5Khz. Crank up the volume to really high levels and the tweeters might give up the ghost as a result!
Personally I wouldn't touch it. Yes there are significant improvements to be had by improving the cabinet resonances and using better quality caps and inductors on the crossover (I have done it) but don't use the Gr-Research design. Oh and if the brightness is the thing that annoys you most just increase the tweeter resistor to 4.5 - 5 ohms. An easy change. You don't need to spend 500 bucks to achieve that!
The RP-8000F's have 8" woofers, the RP-6000F's have 6.5"s... just saying. Did you measure at 1 meter? Very interesting video.
How to improve your listening experience with klipsch: Sell them and get better speakers. I am done with those tinnitus-factory horns. What they have in transient attack is lost in detail /nuance and dimension. They are mid-fi speakers ok for HT. They don't "reveal" they exaggerate. I sold off my Klipsch reference and am never looking back. FWIW: I did the GR research mods. The mods greatly improved on the crappy factory crossover and poor engineering. Still, the speakers have that nasty titanium tweeter. Ever use Klipsch nearfield? It's painful.
I totally agree with you on that. I also chose the German Canton Vento 896DC, which are much more balanced, especially when listening to classical music.
How does one know if their speakers have this issue? I have a pair of RP-250f and would like to know if they have this issue. Are you supposed to be able to hear it?
Issues as bad as what was present in this model can be heard pretty easily. I don't know how bad off the 250 model is.
I used to have a set of RF-83's... same two way design but w/ 3 8" woofers and a 1.75" diaphragm tweeter. My question is about the acoustic center you mentioned. It would seem as though that problem would be even worse with the 83's w/ the center of the 3 woofers being lower than the center of the 2 woofers in the 8000f's.... Is that true, or am I confused? weird if that is the case because the rf-83's were incredible sounding speakers. Spent the last year looking for a decent used set... now considering rf-7 III's or La Scala's as well. Appreciate info or help! Best Regards