Okay please some one comment back. I bought my ps1 a year ago and haven’t played for about 6 months until yesterday. Bought new games that are probably used but no scratched Almost brand new. My ps1 was working fine last night until today. I booted up my game and after the first logo it took a while (a few extra seconds not long) and then it took me ti the main menu. I can hear the disc moving but it has that weird buggy sound I hear it spin but a glitchy sound I hear spin for about ten seconds and then it stop… and then again. And then it stops again and again. What wrong ? Can someone please tell me
This is not a really a dev console but a Net Yaruze which is a consumer development console. But you need the special memory card to acually get anything running on that
Personally, I think you should of taken the board out to do the work, rather than working in a confined space and angle. You can get a nasty shock from capacitors on power supplies, which can hold a charge after the machine has been on. At one point your solder is resting on the power supply. When doing a tutorial you should let the viewers, who may be attempting repairs for the first time, know of any dangers to health. Even if you think that the risk is minimal. There is a reason that those 'danger of shock' labels on the case. Please be careful people when working on any electronics.
While watching it I was designing a thin silicon cover that can go over various transformers and psu, while working on a device. Tho I agree, since it was a client board I felt he had to many risk points of failure, Should have removed the psu at least and further disassembled.
Okay please some one comment back. I bought my ps1 a year ago and haven’t played for about 6 months until yesterday. Bought new games that are probably used but no scratched Almost brand new. My ps1 was working fine last night until today. I booted up my game and after the first logo it took a while (a few extra seconds not long) and then it took me ti the main menu. I can hear the disc moving but it has that weird buggy sound I hear it spin but a glitchy sound I hear spin for about ten seconds and then it stop… and then again. And then it stops again and again. What wrong ? Can someone please tell me
Is that a Net Yaroze model? Those are very hard to find. Props for working with such a small area. I usually strip the console down to the board only so that I have more room to work with.
Okay please some one comment back. I bought my ps1 a year ago and haven’t played for about 6 months until yesterday. Bought new games that are probably used but no scratched Almost brand new. My ps1 was working fine last night until today. I booted up my game and after the first logo it took a while (a few extra seconds not long) and then it took me ti the main menu. I can hear the disc moving but it has that weird buggy sound I hear it spin but a glitchy sound I hear spin for about ten seconds and then it stop… and then again. And then it stops again and again. What wrong ? Can someone please tell me
same thing happened to my playstation and I just got it it plays but in certain level the Lents just stops so what should I do I don't have the welding tools either
The wobble is intentional. Believe it or not, PS1 discs are imperfect and the console looks for wobbles on purpose to detect that its a legit PS1 game, otherwise it won't boot.
@@SpiritOfHalloween31 In the video you can see the orange rubber band where a piece of the hold down is missing and the disk seems to wobble excessivly. If you look for the video "Making a PlayStation 1 modchip" you find out how a legit game was detected (unless the video is wrong). Do you have a video title, or article explaining the intentional wobble ? Thanks for sharing.
@@BrainHurricanes Huh, I thought there was one. There was a video awhile back explaining the wobble, maybe I misunderstood it. th-cam.com/video/XUwSOfQ1D3c/w-d-xo.htmlfeature=shared
I have a ps1 and it won't starting reading disc until I push more the small piece or pressing more the PS disc cover ! Any idea why it does that? It was like before fine !! Idk what happened!!!
Okay please some one comment back. I bought my ps1 a year ago and haven’t played for about 6 months until yesterday. Bought new games that are probably used but no scratched Almost brand new. My ps1 was working fine last night until today. I booted up my game and after the first logo it took a while (a few extra seconds not long) and then it took me ti the main menu. I can hear the disc moving but it has that weird buggy sound I hear it spin but a glitchy sound I hear spin for about ten seconds and then it stop… and then again. And then it stops again and again. What wrong ? Can someone please tell me
I'm no expert, but at 11:11 into the video, he pushes down a spring north east of the disc, that is pushed down when the lid is closed. The spring could either be worn out or whatever mechanism the spring is sitting on is at fault... or it could be both.
Hey @DV Game repair could you please help me with my pal region ps1 everytime i load up an disc it i din't load and instead it would boot up to the main menu i tried talking off the console to see if there's sour dust but non of it is there so can you help me plz Daniel schellingerhout ❤
Really didn't like the way his hand was flirting around the caps on the power supply when the unit was turned off and then when it was turned on as well.
Okay please some one comment back. I bought my ps1 a year ago and haven’t played for about 6 months until yesterday. Bought new games that are probably used but no scratched Almost brand new. My ps1 was working fine last night until today. I booted up my game and after the first logo it took a while (a few extra seconds not long) and then it took me ti the main menu. I can hear the disc moving but it has that weird buggy sound I hear it spin but a glitchy sound I hear spin for about ten seconds and then it stop… and then again. And then it stops again and again. What wrong ? Can someone please tell me The sound sounds more like a laser ish is that the problem ? What do I do ?
I am no expert and you clearly know your stuff. But I suffered watching every single second of this video, 'cause working on it in a cramped space and a weird angle without even removing the metal plate and the disc reader covering the mobo was just the worst decision. Expecially for the viewer
Woah. That's a Net Yaroze PS1. Those are not common at all. Hats off to you for fixing it. You definitely knew what you were doing as well.
Okay please some one comment back. I bought my ps1 a year ago and haven’t played for about 6 months until yesterday. Bought new games that are probably used but no scratched Almost brand new. My ps1 was working fine last night until today.
I booted up my game and after the first logo it took a while (a few extra seconds not long) and then it took me ti the main menu. I can hear the disc moving but it has that weird buggy sound
I hear it spin but a glitchy sound
I hear spin for about ten seconds and then it stop… and then again. And then it stops again and again. What wrong ? Can someone please tell me
@@jonnashernandez6695 That sounds like either a dirty laser or a worn out motor.
@@1980sGamer thank you for relaying back I’ll check on it thanks
@@jonnashernandez6695 No problem. :)
Did you fix it? @@jonnashernandez6695
This is not a really a dev console but a Net Yaruze which is a consumer development console.
But you need the special memory card to acually get anything running on that
That Net Yaroze model is truly a beautiful PS1 console, love the colour ❤
Personally, I think you should of taken the board out to do the work, rather than working in a confined space and angle. You can get a nasty shock from capacitors on power supplies, which can hold a charge after the machine has been on. At one point your solder is resting on the power supply. When doing a tutorial you should let the viewers, who may be attempting repairs for the first time, know of any dangers to health. Even if you think that the risk is minimal. There is a reason that those 'danger of shock' labels on the case. Please be careful people when working on any electronics.
While watching it I was designing a thin silicon cover that can go over various transformers and psu, while working on a device. Tho I agree, since it was a client board I felt he had to many risk points of failure, Should have removed the psu at least and further disassembled.
Okay please some one comment back. I bought my ps1 a year ago and haven’t played for about 6 months until yesterday. Bought new games that are probably used but no scratched Almost brand new. My ps1 was working fine last night until today.
I booted up my game and after the first logo it took a while (a few extra seconds not long) and then it took me ti the main menu. I can hear the disc moving but it has that weird buggy sound
I hear it spin but a glitchy sound
I hear spin for about ten seconds and then it stop… and then again. And then it stops again and again. What wrong ? Can someone please tell me
Is that a Net Yaroze model? Those are very hard to find. Props for working with such a small area. I usually strip the console down to the board only so that I have more room to work with.
Okay please some one comment back. I bought my ps1 a year ago and haven’t played for about 6 months until yesterday. Bought new games that are probably used but no scratched Almost brand new. My ps1 was working fine last night until today.
I booted up my game and after the first logo it took a while (a few extra seconds not long) and then it took me ti the main menu. I can hear the disc moving but it has that weird buggy sound
I hear it spin but a glitchy sound
I hear spin for about ten seconds and then it stop… and then again. And then it stops again and again. What wrong ? Can someone please tell me
what’s an IPA you mentioned? Also how did you decrease the speed and what is ohm?
How do you decrease the resistence
That's what I am wondering as well. How do you decrease the resistance?
The pot is located right on the ribbon cable near the laser.
The pot??
Screw @@beasycruz7516
I am sure that this has been asked before, but could you please tell about your video setup------camera, lens, Microscope? etx. Thanks Much!!!!
same thing happened to my playstation and I just got it it plays but in certain level the Lents just stops so what should I do I don't have the welding tools either
Well that was a weird problems 😅.
Nice job, you're save a good old PlayStation 👍
Man you got some skills i would have had to take it apart to work
The disk hold down looks to be broken also, making the disk wobble.
The wobble is intentional. Believe it or not, PS1 discs are imperfect and the console looks for wobbles on purpose to detect that its a legit PS1 game, otherwise it won't boot.
@@SpiritOfHalloween31 In the video you can see the orange rubber band where a piece of the hold down is missing and the disk seems to wobble excessivly. If you look for the video "Making a PlayStation 1 modchip" you find out how a legit game was detected (unless the video is wrong). Do you have a video title, or article explaining the intentional wobble ? Thanks for sharing.
@@BrainHurricanes Huh, I thought there was one. There was a video awhile back explaining the wobble, maybe I misunderstood it. th-cam.com/video/XUwSOfQ1D3c/w-d-xo.htmlfeature=shared
I have a ps1 and it won't starting reading disc until I push more the small piece or pressing more the PS disc cover ! Any idea why it does that? It was like before fine !! Idk what happened!!!
Okay please some one comment back. I bought my ps1 a year ago and haven’t played for about 6 months until yesterday. Bought new games that are probably used but no scratched Almost brand new. My ps1 was working fine last night until today.
I booted up my game and after the first logo it took a while (a few extra seconds not long) and then it took me ti the main menu. I can hear the disc moving but it has that weird buggy sound
I hear it spin but a glitchy sound
I hear spin for about ten seconds and then it stop… and then again. And then it stops again and again. What wrong ? Can someone please tell me
Haven’t been answered yet ?
Hey TH-camr help ?!
I'm no expert, but at 11:11 into the video, he pushes down a spring north east of the disc, that is pushed down when the lid is closed. The spring could either be worn out or whatever mechanism the spring is sitting on is at fault... or it could be both.
Quick fix could be to add some blue tack to the small piece on the lid you mentioned.
@grima using a toothpick to hold cover up and push down on that spring button. When the top cover is on of course, wormtongue2014
Hey @DV Game repair could you please help me with my pal region ps1 everytime i load up an disc it i din't load and instead it would boot up to the main menu i tried talking off the console to see if there's sour dust but non of it is there so can you help me plz
Daniel schellingerhout ❤
Really didn't like the way his hand was flirting around the caps on the power supply when the unit was turned off and then when it was turned on as well.
Have you done a review of how you set up your camera for the overhead shots? Looks sweet bro!
Okay please some one comment back. I bought my ps1 a year ago and haven’t played for about 6 months until yesterday. Bought new games that are probably used but no scratched Almost brand new. My ps1 was working fine last night until today.
I booted up my game and after the first logo it took a while (a few extra seconds not long) and then it took me ti the main menu. I can hear the disc moving but it has that weird buggy sound
I hear it spin but a glitchy sound
I hear spin for about ten seconds and then it stop… and then again. And then it stops again and again. What wrong ? Can someone please tell me
The sound sounds more like a laser ish is that the problem ? What do I do ?
Try to modify the potentiometer in the back of the laser
@@firasbesbes2036 thank you I’ve fixed it a while 💯👍
I am no expert and you clearly know your stuff. But I suffered watching every single second of this video, 'cause working on it in a cramped space and a weird angle without even removing the metal plate and the disc reader covering the mobo was just the worst decision. Expecially for the viewer
Bro just tap the black plastic near the lens give it a tap maybe 3-5times 100% worked on 4 ps1 tested
Plz help what do you mean what plastic
@@10alexir i dont know how to explain but the black plastic holding the lens, give a tap to a whole of that.. update me if it works fine with you :)
It's works I just tapped the shit out of it. It's the loose black plastic, not the len's square plastic.