Really helpful video, thanks. You asked about the screw-in fixings, if there was another way - there's a lot of that in jewellery-making, where you have to join 2 or even many more metal loops (known as jump rings) together, usually with 2 pairs of needle-nose pliers. It's been established that rather than pull loops wide open, then try to crimp back together again (which damages the structural integrity & risks that it never again becomes completely round), it is better to hold the loop horizontally between 2 pairs of pliers, with the join facing upwards & just lightly twist the hands (1 forward & 1 backward) so the ends of the jump ring move in opposite direction from each other. The ends remain aligned while appearing to be a row apart, leaving a gap for parts to be added on. Once assembly is complete, we twist in the opposite direction, returning the ends to their original position & the circle shape is restored, undamaged. Hope this helps.
Was SO excited when I saw this video pop up in my feed! Been wanting to build this style of shutter for a while, but didn’t know where to start. After watching this I now feel confident about going to the store and buying them premade.😂
I'm always impressed by the way you make complex projects look so simple. Straight to the point and precisely detailed 👌. Building the thing is one side of the work, teaching to average woodworkers on cam is the other part that takes a lot of communication skills you master as well. Thank you very much Marc for all the effort you put in each video.
I remember See Jane Drill had a good video on this a couple years ago, I think, and she called it a ticking stick. A great tool, as you show so well 😀 well done! They look awesome.
I spent part of my youth on the shores (and water) of the Chesapeake. Not a whole lot of shipwrights and boatbuilders, but a few. They all called it a tick stick. Might be a regional thing, like hoagies vs. grinders vs. subs.
As an experienced woodworker I have been putting off this project of shutters Rockler is my go to place for 20 plus years mine will only be traditional no arches but I am totally impressed with your plan of action, remember those who fail to plan plan to fail!
Hi from Easton Maryland! No matter if is the first time you make this shutters,you show your master and thank you for share. God bless you and your family. Stay safe.
Marc, that was nothing short of genius! I'd probably still be scratching my head trying to figure out how to work with the curves. I don't see shutters in my future, but it was very interesting to see the process. Thanks for another great video.
Thanks Marc, and thanks to Rockler! Well planned project ... logical operations order ... and a nicely completed project. It's great to see a technique (in this case the Spiling Stick ... er Spag-Stick) used in a different environment to simplify the task at hand. Keep up the good work! Regards, R
Highly skilled workmanship along with great planning makes you an exceptional craftsman Mark. You are too modest but just as capable. Very nice heirloom piece that will adore that space
I've said it already, but this is just a fantastic project and the ONLY solution I've ever seen that looks really good and performs well for those odd windows that seem to be in so many houses.
A whole new variation of a story board. Very well done. I made a shutter for a more typical window about 40 years ago. I used ash for the frame and basswood for the shutters. A very tough project but the wife was happy. I’m sure yours was too.
Nice job. I'm a big fan of shutters generally. I've made plenty, but not the louvred variety. I did modify some once and swore I'd never go near them again! But that Rockler calculator has made me think again. Thanks for sharing.
That radius router bit looks like it would be great for a fretboard shaping. What an amazing project! I may have to do this one here on a curved kitchen window that gets sunset glare in summer months.
Great info, very helpful and awesome end result (like it would end any other way). As for the "stick" problem you "quickly" mentioned....they have pills to help with that now a days. 🙃 I REALLY DO enjoy laughing while learning and your sense of humor is without equal (in the youtube woodworking community). Thanks yet again for all you (and your small crew) do for all of us! 😄👍
Lovely bit of work there man. I LOVE THIS TYPE OF WORK. It's never easy and takes a bit of time but once u get the hang of doing it u find it easier every time. U should do more of this work man. U made a beautiful job if those shutters,
Awesome video Marc! The “Spag Stick” is something I don’t think I’d ever use a lot but definitely cool knowledge to have in my back pocket in case I need it. Thank you for the info!
Marc, this was an amazing video! Such a great design, the shutters look amazing and you really made me believe I could do this in the square windows in my home. What a wonderful video and upgrade idea for any home! Top notch content, presentation, and woodworking as always!
As a high end trim carpenter for 25 years, some things are fun to do once for the experience of it and to say you did it, but never want to do again. Lol This was awesome by the way.
Hey Marc. I’ve been watching your videos pretty much since day one. I just wanted to let you know that the feel and quality of this latest video was amazing. The live narrative that over flows b-roll was pro. Great energy through the whole video. Loved it.
What a great topic and video! I really feel like I can do this project with your explanation and tutorial. Thank you for your graceful style of teaching and all that you (& Nicole) do.
I sell custom Shutters for a living, and I spend a vast amount of time dealing with design: Rockler has taken a great deal of the pain away from this project, but I fully appreciate the pig of a job you took on: well done for an excellent finish! Good call not shaping the louvers, but rather squaring of the ends as they are indeed a nightmare to finish well
Nice video. I’ve priced these for a circle top for my home. After watching the process, I see why they’re so pricey. However, you present this project in a manageable way. Thanks!
For me I think it would be easier just to get some giant paper and tape it together and trace. LOL You have way more patience than I ever could... Nice video
Nautical trivia of the week: Joggle Stick, used for fitting bulkheads (walls) inside boats hull. Exactly what you did in a way. A Spilling "Batten" used for sizing and fitting planks to side of hull.
Shapin' it old school with a story (spag) stick. That's the way my Grandpa did it back in the day. Restoring his planes and saws is what got me started. I absolutely love using his tools. :)
Wow… just awesome… I feel i can actually make this wrong only once or twice now before getting it right!!! Where before this, I would NEVER have even attempted this project…. FANTASTIC video
I've loved watching your videos and this one is no exception. The only comment I would make, coming from a chainmail maker point-of-view, is that when you open up the screw eye on your next project, consider opening the screw eye side to side (i.e., move the cut end to the side) rather than as you did. This will insure that you don't deform the circle of the screw eye when you close the screw eye again.
Thanks for this vedio. You really did break all the steps down nicely. The nice thing is that you can apply this method to vertical or horizontal slats.
well done mate. Very nice project. Now since watching this I am going to order the rockler system and make shutters for my whole house and save 5 or 6 thousand $.
What a fantastic build!! I've been following along on Instagram but I'm still super impressed with how the video came together. Super neat stuff from Rockler to make this much more approachable.
Hey Marc, there are many woodworkers out there that look up to you the same way you look up to David Marks. Im one of them. I’m thankful for your work and knowledge. Happy New Year to you and yours. Can’t wait to see what’s in store.
Good video as always Marc. I always heard of that as a ticking stick. But I have heard it called different things in different parts of the country. I used to always do taped together paper templates...
Stunning results. Perfect fit and very nice look and function!!! I am surprised you didn't use a centering jig for drilling into end grain? Bits wander off in end grain and I can see it has on several pieces though it appears the degree of offset hasn't had a bad impact. All the detailed work and then hand drilling without a jig caused my eye to start twitching!!! Come on Mr Spag!!!
Haha thanks Brian. One of the keys to woodworking is knowing the actual impact of any particular action you take. If you go through extra steps that have zero impact on the end result, you are either inexperienced or retired. 😉
Interesting issue came up when I installed premade shutters as bifold doors on a closet. With outside shutters, the closed slats should face down on the outside so water runs off. In your case you have an obvious inside/outside. When both sides are inside, what to do? We experimented and the consensus (Nicole rule) was that closing down looked most natural (pretend the room is the outside). Thanks for the video.
Spagstick! I can’t wait to try this out on my next project. The Rockler kit looks very helpful. One thought on a way to improve the accuracy of the slag stick…. Drive a small nail into the base of the stick so just “the tip” is protruding. I think using this as a witness mark will help when it comes to replicating the points on your ply. Just a thought. Been a fan for over a decade I’m guessing and appreciate all that you do Mark.
Great built, Marc! I actually just discovered the shutter building systems in the latest Rockler catalog and started putting info into the online design wizard on their web site for some larger windows in my living room that have been needing shutters since we moved in 3 years ago and I’ve been wondering “could I do it?”. You made it look doable and I will surely look into a little more seriously after seeing your inspiring video. But, if you have some extra time on your hands, I’m out in SE Aurora so probably not too far from you if you want to help. All windows are rectangular so won’t even need the Spag-stick!
The spiling stick is also called a tick stick or a ticking stick. There are a number of great videos on tick sticking on TH-cam. It's a fantastic trick for cutting awkwardly shaped flooring when you're dealing with tiles, stairs, trying to get around an odd corner, etc.
I've been fitting curved parts longer than most of your viewers have been alive, and I don't know how I didn't know about this. Thanks so much. Seriously. And I will pass it on. Anyone that learns this from me will call it a #spagstick.
Excellent build. I don’t think I would have glued both ends. If any of your plastic pins need replacement you need one end dry fit with screws only to secure the slates in order to disassemble to facilitate repairs.
Those look great, Marc. Seems like most of our woodworking goes towards keeping our better half happy (lol). I guess that's the most important thing. Bill
0:00 - Ad
0:16 - Intro
1:27 - Copy the Shape with a Spiling Stick
8:09 - The Design
11:37 - The Wood
12:37 - Pin Holes
15:09 - Top Rail
16:05 - Rabbets
18:36 - Bead Detail
22:41 - Mortise & Tenon
23:00 - Cutting the Curve
24:02 - Sanding & Pre-Finishing
24:39 - Louvers
27:12 - Control Arm
29:00 - Mouse Hole
29:40 - Screw Eyes & Assembly
How many hours did this project take?
Really not sure. I don't track my time. It's polluted by having to document the process anyway. :)
@@woodwhisperer was it as long as your spagstick
The small success you didn't discuss: nice job matching the finish and wood already around that window. :)
Really helpful video, thanks. You asked about the screw-in fixings, if there was another way - there's a lot of that in jewellery-making, where you have to join 2 or even many more metal loops (known as jump rings) together, usually with 2 pairs of needle-nose pliers. It's been established that rather than pull loops wide open, then try to crimp back together again (which damages the structural integrity & risks that it never again becomes completely round), it is better to hold the loop horizontally between 2 pairs of pliers, with the join facing upwards & just lightly twist the hands (1 forward & 1 backward) so the ends of the jump ring move in opposite direction from each other. The ends remain aligned while appearing to be a row apart, leaving a gap for parts to be added on. Once assembly is complete, we twist in the opposite direction, returning the ends to their original position & the circle shape is restored, undamaged. Hope this helps.
Was SO excited when I saw this video pop up in my feed! Been wanting to build this style of shutter for a while, but didn’t know where to start. After watching this I now feel confident about going to the store and buying them premade.😂
Glad I could help! :)
LMAO!!! Same here.
You are a genius at script writing and explaining complicated subjects!
Well, I'm a carpenter ( alot of trim). That looks really good. Hardest part is matching old with new. You nail it. Nice work!!
That's what impressed me the most. Matching existing wood and stain is a pain!
I'm always impressed by the way you make complex projects look so simple. Straight to the point and precisely detailed 👌. Building the thing is one side of the work, teaching to average woodworkers on cam is the other part that takes a lot of communication skills you master as well. Thank you very much Marc for all the effort you put in each video.
Thanks Denis. Really appreciate that, man!
Great job! I think I will stick with square and rectangular windows and buy pre-made plantation shutters. 😎🤙
I remember See Jane Drill had a good video on this a couple years ago, I think, and she called it a ticking stick. A great tool, as you show so well 😀 well done! They look awesome.
I spent part of my youth on the shores (and water) of the Chesapeake. Not a whole lot of shipwrights and boatbuilders, but a few.
They all called it a tick stick. Might be a regional thing, like hoagies vs. grinders vs. subs.
I've heard it called a story pole. Might be a different beast.
As an experienced woodworker I have been putting off this project of shutters Rockler is my go to place for 20 plus years mine will only be traditional no arches but I am totally impressed with your plan of action, remember those who fail to plan plan to fail!
I have a similar situation in my living room. Your video will solve the problem. Thank you for sharing. Have a great day and stay safe.
Hi from Easton Maryland! No matter if is the first time you make this shutters,you show your master and thank you for share. God bless you and your family. Stay safe.
Marc, that was nothing short of genius! I'd probably still be scratching my head trying to figure out how to work with the curves. I don't see shutters in my future, but it was very interesting to see the process. Thanks for another great video.
Great video. For odd rhombus shapes I’ve found a band clamp to help where a normal clamp can’t be put on the curve. Thanks again Marc
Thanks Marc, and thanks to Rockler!
Well planned project ... logical operations order ... and a nicely completed project.
It's great to see a technique (in this case the Spiling Stick ... er Spag-Stick) used in a different environment to simplify the task at hand.
Keep up the good work!
Regards,
R
Highly skilled workmanship along with great planning makes you an exceptional craftsman Mark. You are too modest but just as capable. Very nice heirloom piece that will adore that space
I've said it already, but this is just a fantastic project and the ONLY solution I've ever seen that looks really good and performs well for those odd windows that seem to be in so many houses.
Thanks Vic!! REALLY appreciate the compliment!
A whole new variation of a story board. Very well done. I made a shutter for a more typical window about 40 years ago. I used ash for the frame and basswood for the shutters. A very tough project but the wife was happy. I’m sure yours was too.
Nice job. I'm a big fan of shutters generally. I've made plenty, but not the louvred variety. I did modify some once and swore I'd never go near them again! But that Rockler calculator has made me think again. Thanks for sharing.
That radius router bit looks like it would be great for a fretboard shaping. What an amazing project! I may have to do this one here on a curved kitchen window that gets sunset glare in summer months.
Great info, very helpful and awesome end result (like it would end any other way).
As for the "stick" problem you "quickly" mentioned....they have pills to help with that now a days. 🙃
I REALLY DO enjoy laughing while learning and your sense of humor is without equal (in the youtube woodworking community).
Thanks yet again for all you (and your small crew) do for all of us! 😄👍
You always make me happy watching your videos :) self taught woodworker here and just like you it seems i constantly doubt my ability!
Love these longer format project videos. Not quite as comprehensive as a guild video, but perfect for lunch break entertainment. Good work!
Glad you like them!
Lovely bit of work there man. I LOVE THIS TYPE OF WORK.
It's never easy and takes a bit of time but once u get the hang of doing it u find it easier every time. U should do more of this work man. U made a beautiful job if those shutters,
Wow, great video - it’s like a 34 minute guild build ! Thanks !
The best video for plantation shutters I have watched so far. Great work! You helped me a lot for my project.
Awesome video Marc! The “Spag Stick” is something I don’t think I’d ever use a lot but definitely cool knowledge to have in my back pocket in case I need it. Thank you for the info!
I declare. You rock at everything you do. Thank you!
LOL! Spagstick sounds like an insult for someone. "Don't be such a spagstick!"
Those turned out excellent! I was laughing about the adjustability of the louvers. Ours are closed 90% of the time too!
Marc, this was an amazing video! Such a great design, the shutters look amazing and you really made me believe I could do this in the square windows in my home. What a wonderful video and upgrade idea for any home! Top notch content, presentation, and woodworking as always!
I'm glad that health and safety seems to be a big thing in this shop. I don't know how many channels I've seen don't have proper PPE if any at all.
Respect! That was quite a build. And it came out great.
As a high end trim carpenter for 25 years, some things are fun to do once for the experience of it and to say you did it, but never want to do again. Lol This was awesome by the way.
Hey Marc.
I’ve been watching your videos pretty much since day one. I just wanted to let you know that the feel and quality of this latest video was amazing. The live narrative that over flows b-roll was pro. Great energy through the whole video. Loved it.
I appreciate that! Thank you Dave.
The end result looks amazing! The curve and steps make it more eye catching in my opinion. Awesome craftsmanship.
What a great topic and video! I really feel like I can do this project with your explanation and tutorial. Thank you for your graceful style of teaching and all that you (& Nicole) do.
Thanks for the video...totally awesome! Great tips on building to an irregular shape & definitely helps making shutters less intimidating. Nice job!
Dang Mark, you ought to consider woodworking for a profession!!! Just Kidding. This project has your signature quality on it. Great Job!!!
I would never build this but still learned some interesting techniques. Thanks for sharing these unique projects!
I sell custom Shutters for a living, and I spend a vast amount of time dealing with design: Rockler has taken a great deal of the pain away from this project, but I fully appreciate the pig of a job you took on: well done for an excellent finish!
Good call not shaping the louvers, but rather squaring of the ends as they are indeed a nightmare to finish well
Nice video. I’ve priced these for a circle top for my home. After watching the process, I see why they’re so pricey. However, you present this project in a manageable way. Thanks!
Not sure how I’d missed your channel. Been listening to the pod for a while. Thanks for this awesome content.
Spags.... this video was the over the top. The stick was legit. Tom Silva is proud of you.
Felicidades ...te quedo genial..desde hace tiempo buscaba algo asi, para mi ventana de arco..gracias por compartir
Lovely job. Really enjoyed it. Always wanted to have a go at shutters.
The stick thing is the first time I saw. I knew I could learn something new every day. Thank you.
For me I think it would be easier just to get some giant paper and tape it together and trace. LOL You have way more patience than I ever could... Nice video
Nautical trivia of the week: Joggle Stick, used for fitting bulkheads (walls) inside boats hull. Exactly what you did in a way. A Spilling "Batten" used for sizing and fitting planks to side of hull.
Shapin' it old school with a story (spag) stick. That's the way my Grandpa did it back in the day. Restoring his planes and saws is what got me started. I absolutely love using his tools. :)
Wow… just awesome… I feel i can actually make this wrong only once or twice now before getting it right!!! Where before this, I would NEVER have even attempted this project…. FANTASTIC video
I've loved watching your videos and this one is no exception. The only comment I would make, coming from a chainmail maker point-of-view, is that when you open up the screw eye on your next project, consider opening the screw eye side to side (i.e., move the cut end to the side) rather than as you did. This will insure that you don't deform the circle of the screw eye when you close the screw eye again.
Thanks for this vedio. You really did break all the steps down nicely. The nice thing is that you can apply this method to vertical or horizontal slats.
Love your work. I am also very impressed with your shop. It must make working on projects such a joy.
Great project Marc. The end result looks like it came with the house!!
wow...incredible work. that gives me nightmares just thinking about tackeling a project like that. you nailed it! strong work
well done mate. Very nice project. Now since watching this I am going to order the rockler system and make shutters for my whole house and save 5 or 6 thousand $.
What a fantastic build!! I've been following along on Instagram but I'm still super impressed with how the video came together. Super neat stuff from Rockler to make this much more approachable.
Excellent video explaining something a tad tricky and making it seem reasonably easy. Thank you 😊
Glad to hear some curb your enthusiasm transition
The color match is great.
I was literally searching for tips on how to build these the moment this video went up. Was in a bind, and Wood Whisperer to the rescue!
Hey Marc, there are many woodworkers out there that look up to you the same way you look up to David Marks. Im one of them. I’m thankful for your work and knowledge. Happy New Year to you and yours. Can’t wait to see what’s in store.
Good video as always Marc.
I always heard of that as a ticking stick. But I have heard it called different things in different parts of the country. I used to always do taped together paper templates...
I will be using that idea to start on the curved shutters on the two palladium windows I have... Thanks!
What an amazing result dude! Talk about wood crafting! Great job! 👊💪
Nicely done. Great info on fitting that curve, I never knew how to get that right.
Beautiful work, Mark. I love it. Great presentation and instruction.
Stunning results. Perfect fit and very nice look and function!!! I am surprised you didn't use a centering jig for drilling into end grain? Bits wander off in end grain and I can see it has on several pieces though it appears the degree of offset hasn't had a bad impact. All the detailed work and then hand drilling without a jig caused my eye to start twitching!!! Come on Mr Spag!!!
Haha thanks Brian. One of the keys to woodworking is knowing the actual impact of any particular action you take. If you go through extra steps that have zero impact on the end result, you are either inexperienced or retired. 😉
Interesting issue came up when I installed premade shutters as bifold doors on a closet. With outside shutters, the closed slats should face down on the outside so water runs off. In your case you have an obvious inside/outside. When both sides are inside, what to do? We experimented and the consensus (Nicole rule) was that closing down looked most natural (pretend the room is the outside). Thanks for the video.
Those really came out nice. Incredibly complicated but you made it look easy.
Spagstick! I can’t wait to try this out on my next project. The Rockler kit looks very helpful. One thought on a way to improve the accuracy of the slag stick…. Drive a small nail into the base of the stick so just “the tip” is protruding. I think using this as a witness mark will help when it comes to replicating the points on your ply. Just a thought. Been a fan for over a decade I’m guessing and appreciate all that you do Mark.
That sounds like a good idea. Maybe even two nails so it prevents rotating too.
Very good job. Well done. Plenty of helpful info.
Great built, Marc! I actually just discovered the shutter building systems in the latest Rockler catalog and started putting info into the online design wizard on their web site for some larger windows in my living room that have been needing shutters since we moved in 3 years ago and I’ve been wondering “could I do it?”. You made it look doable and I will surely look into a little more seriously after seeing your inspiring video. But, if you have some extra time on your hands, I’m out in SE Aurora so probably not too far from you if you want to help. All windows are rectangular so won’t even need the Spag-stick!
The spiling stick is also called a tick stick or a ticking stick. There are a number of great videos on tick sticking on TH-cam. It's a fantastic trick for cutting awkwardly shaped flooring when you're dealing with tiles, stairs, trying to get around an odd corner, etc.
Great tutorial! BTW, you can use a ratchet strap around the edges to clamp the curved top.
Your spag-stick saved the day. Thanks!
Very cool. You make it look easy, even though I know it isn't. A lot of things to think through.
That turned out better than pretty good. Very, very nice. 👊🤘👍
Well done sir ! You made it look very easy and simplictic, I know it's not ! Looking forward to making a few sets !
I've seen those sticks called "tick sticks" which makes sense considering how hard it was to say spilling.
That was really cool. Very inspiring. I was thinking about trying that out for my own house. Thanks for sharing
Lovely job. Good tip with the stick!
Beautiful work, Marc.
Very Nice Spag. Well done, looks great!!
Damn clever - and useful. I've never seen this before and a bit THANK YOU.
They came out great, I'm fixing to start building my shutters here after the new year.
Great build Marc
I've been fitting curved parts longer than most of your viewers have been alive, and I don't know how I didn't know about this. Thanks so much. Seriously. And I will pass it on. Anyone that learns this from me will call it a #spagstick.
Awesome project and something I'd love to do for my home. I've seen the kit they had for doing the shutters.
Excellent build. I don’t think I would have glued both ends. If any of your plastic pins need replacement you need one end dry fit with screws only to secure the slates in order to disassemble to facilitate repairs.
Absolutely beautiful custom job
little window tint would block even more. Beautiful work as always!
Already tinted. 🤷🏻♂️
Loving the way they turned out and your vid is much simpler I think
Thanks for the video. Now I may make some plantation shutters next year. It is such a shame Rockler don't have a metric version.
Great job. The shutters look fantastic.
Those look great, Marc. Seems like most of our woodworking goes towards keeping our better half happy (lol). I guess that's the most important thing.
Bill
You are a braver man than I Marc.....
Nice Charleston Shutters!
Spiling is used quite often in wooden boat building. You always have to match the curve of the previous board and spiling is just the way to do that.