Strong BUY. Still early innings. NVIDIA is the dominant leader in AI and the preferred technology partner globally. Even w new competition on the horizon, NVIDIA is far ahead of the competition. 85% market share. 76% margin. Unrivaled demand for new Blackwell chip. Demand far exceeds production for Blackwell through to 2025 and beyond. No competitor has anything close to Blackwell. And forward P/E is about 33 (cheap for a high growth stock). Buy this stock and wait. You will be rewarded.
When it comes to investment, diversification is key. That is why I have my interests set on key sectors based on performance and projected growth. They range from the EV sector, renewable energy, Tech and Health (AMD) alongside coins, and gold. I'm also working on an investment plan with my Fin. Advisor that includes AI looking into Nvidia, MSFT, Alphabet stocks among others. I've been utilising a financial advisor for more than 15 months now, and I've made over $800,000
Hi Keith, are they the clicky ones or tighten up with a black knob, if clicky, a bit of silicon spray along the runner and then go very slow up just past the click and they should hold. If a knob type and broken it will need replacing. 👍
@@juliewebber5791 prima leisure do the soft rubber trims, these are easier to change than the hard plastic, it's just a case of working away slowly, if you spray some soapy water on the edge and on the trim this should help to start from the widest point and slide them on if possible, the only other way is to remove the bumper but that can be a nightmare. 👍
@@thecaravanplace thanks Mark, we have the rubber trim but up to now we’ve not been able to able to get it fixed on, I will try what you have said, wish me luck 🤞🤞
@@juliewebber5791 they can be a real pain, it's very tight between the body and bumper, but the bumper should have a bit of flex, which should give more room.
I had a problem with windows dropping off a Trigano Rubis at quite a shallow angle. Cured it by gently peening over the top part of two of the hinges with a small hammer.
Hi Mark, would you have any tips on how to remove a dometic rms8551 fridge push button to access the rod inside without removing the inner fridge door skin? Thank you for your help
Hi mark I watch nearly all your videos for the tips and know how,my daughter has just bought a compass rallye 490/4L 2001 with some issues, I need to do a repair to the front quarter as there was a leak I’ve been looking on the internet for the wall boarding for the colour and where to get the sheet , can you give me any advice as to the colour and where’s best to get the board Thanks keep up the good work
Possibly better to use a matching wood colour, the original boards won't be available and any copies will be out on colour. Some vans also used a fabric covered board in the 2 front corners, so if re doing curtains or upholstery, then matching corner panels in the same material would look good. A Google search for caravan wall boards, ebay etc it's normally the postage that's expensive, so maybe asking a local dealer what wall board they can get. Hope this helps 👍
Hi just looking for some advice usually in the winter I put the heating on in the caravan I store it at the back of the house I use a 19 kg bottle of propane can I use a 47 kg bottle too save running Back an forward from gas dealer
@@StuartLaw-q5o Cris can supply you with the stencil and the pen to add the Cris number if required. Most new vans only have a few windows etched now, so not every one has to be done.
Strong BUY. Still early innings. NVIDIA is the dominant leader in AI and the preferred technology partner globally. Even w new competition on the horizon, NVIDIA is far ahead of the competition. 85% market share. 76% margin. Unrivaled demand for new Blackwell chip. Demand far exceeds production for Blackwell through to 2025 and beyond. No competitor has anything close to Blackwell. And forward P/E is about 33 (cheap for a high growth stock). Buy this stock and wait. You will be rewarded.
When it comes to investment, diversification is key. That is why I have my interests set on key sectors based on performance and projected growth. They range from the EV sector, renewable energy, Tech and Health (AMD) alongside coins, and gold. I'm also working on an investment plan with my Fin. Advisor that includes AI looking into Nvidia, MSFT, Alphabet stocks among others. I've been utilising a financial advisor for more than 15 months now, and I've made over $800,000
Ryan Thomas Kelly is the licensed fiduciary I use. Just research the name
He's mostly on Telegrams, using the user name
@Tryankelly
Ryan Thomas Kelly is the licensed fiduciary I use. Just research the name.
Great tip on the window replacement. I had to replace the front middle on my old Lunar Clubman. It cost me £50 to get a guy to fit it.
Where did you get the replacement from please
@@paulbevan808 I bought it from a scrap yard in Essex. Ironically enough I had the old one removed and fixed it so now I’ve got two!
Hi Mark where did u get your new window from please I need a front left 1 for my 2007 lunar clubman thanks
Try ECCO Windows in Halifax, you may have to send them the old window for them to make the exact mould.
Nice to see an Elddis on the Pitch there is a lot that is good with Elddis Caravans compared to certain other brands.
any advice on how to fix window stays that don't lock in position to hold the window open? thx, new to caravanning and love the channel
Hi Keith, are they the clicky ones or tighten up with a black knob, if clicky, a bit of silicon spray along the runner and then go very slow up just past the click and they should hold. If a knob type and broken it will need replacing. 👍
Thank you for the reply and tip. They are the ones you open the window and at the moment, hope they stay there :)
Mark do you have any tips on changing the white rubber trims on the back and front of the Bailey unicorns series 3 please, as on the Córdoba.
@@juliewebber5791 prima leisure do the soft rubber trims, these are easier to change than the hard plastic, it's just a case of working away slowly, if you spray some soapy water on the edge and on the trim this should help to start from the widest point and slide them on if possible, the only other way is to remove the bumper but that can be a nightmare. 👍
@@thecaravanplace thanks Mark, we have the rubber trim but up to now we’ve not been able to able to get it fixed on, I will try what you have said, wish me luck 🤞🤞
@@juliewebber5791 they can be a real pain, it's very tight between the body and bumper, but the bumper should have a bit of flex, which should give more room.
I had a problem with windows dropping off a Trigano Rubis at quite a shallow angle. Cured it by gently peening over the top part of two of the hinges with a small hammer.
Hi Mark, would you have any tips on how to remove a dometic rms8551 fridge push button to access the rod inside without removing the inner fridge door skin? Thank you for your help
@@TrevorBoakes I don't sorry, it's not one that I have done. Have you tried a Google search and them image search?
@thecaravanplace I've tried Google and TH-cam but no joy unfortunately. Thank you for your time anyway
@@TrevorBoakes
images.app.goo.gl/ZPuaXTcB9finmQyD7
@@TrevorBoakes if same button as on the link, it's a small flat head down the sides and it should pull up.
@thecaravanplace Thanks Mark, it is the same one, I'll give it a go with the screw drivers. Thank you
Hi mark
I watch nearly all your videos for the tips and know how,my daughter has just bought a compass rallye 490/4L 2001 with some issues, I need to do a repair to the front quarter as there was a leak I’ve been looking on the internet for the wall boarding for the colour and where to get the sheet , can you give me any advice as to the colour and where’s best to get the board
Thanks keep up the good work
Possibly better to use a matching wood colour, the original boards won't be available and any copies will be out on colour. Some vans also used a fabric covered board in the 2 front corners, so if re doing curtains or upholstery, then matching corner panels in the same material would look good. A Google search for caravan wall boards, ebay etc it's normally the postage that's expensive, so maybe asking a local dealer what wall board they can get. Hope this helps 👍
Thanks mark helpful as ever 👍
Hi,can you tell me the weight of the Elddis twin bedded on the vid
@@biker1packer 1450kg MTPLM 👍
Hi just looking for some advice usually in the winter I put the heating on in the caravan I store it at the back of the house I use a 19 kg bottle of propane can I use a 47 kg bottle too save running Back an forward from gas dealer
Yes that will work fine 👍
What about the cris number on the window ?
@@StuartLaw-q5o Cris can supply you with the stencil and the pen to add the Cris number if required. Most new vans only have a few windows etched now, so not every one has to be done.
windows dont come cheap!!
Definitely not 👍
I would be taking that poo emoji off know its meant to be humerous but its also not very nice nobody needs reminded what poo looks like lol