Lian Li Sup01 PC Case - Upright GPU Mount?!
ฝัง
- เผยแพร่เมื่อ 15 ก.ย. 2024
- Thanks for watching! Check out the links below for what I used in the build:
Case - Lian Li Sup01: amzn.to/3yajJXS
CPU - AMD 7700X: amzn.to/3Yk9fzR
GPU - PowerColor Hellbound RX7800XT: amzn.to/3YhILz0
Motherboard - GIGABYTE B650 AORUS Elite AX ICE: amzn.to/4fjWcVl
Storage - WD Black SN850X 2TB: amzn.to/4daEH7V
RAM - TEAMGROUP T-Cerate 32GB 6400MHZ: amzn.to/46iCOnq
AIO - GIGABYTE AORUS Waterforce II 360mm: amzn.to/3ye1dhp
PSU: NZXT C1200 White: nzxt.com/produ...
---------------------------------------------------------
💥 My Main PC and monitors 💥
Case: amzn.to/3jIYPbm
Motherboard: amzn.to/3fD1f5b
CPU: amzn.to/3SJNfsQ
CPU Cooler: amzn.to/3zUq1bc
GPU: amzn.to/3xeD71R
GPU Sag Bracket: amzn.to/44WBgh9
RAM: amzn.to/3ytFw87 ( x2 )
PSU: amzn.to/3DaR9V3
PSU Extensions: amzn.to/3sJnkpT
SSD: amzn.to/3jXAxds ( 2TB x2 )
Fans: amzn.to/3B8gwqZ ( x4 / 3-pack )
Thermal Paste: amzn.to/3yw0bsh
Thermal Paste Spreader: amzn.to/3f6sjL6 ( 3 Pack )
Ultrawide: amzn.to/3yx34dT
Top monitor: amzn.to/3SSjQ0f
Monitor stand: amzn.to/3L0rJyK
🔴 Desk Setup / Misc 🔴
Keyboard: amzn.to/3DaSWcJ
Mouse: amzn.to/3JeR3zR
Wrist Pad: amzn.to/3PIaIf7
Mouse Pad : amzn.to/3SNzGcw
Microphone: amzn.to/3ZlPaqI
Boom Arm: amzn.to/3PNBO4j
Headphones: amzn.to/3VbabBJ
Audio Interface: amzn.to/3fyhaBu
Speakers: amzn.to/3t2Pc7p
Speaker Stands: amzn.to/3XJQWSq
Foot Rests: amzn.to/3f467QH
Fake Vines: amzn.to/3mmXest
Chair: amzn.to/41P9br0
Lego Bonsai: amzn.to/44uKi4s
Alex Drawer Ogranizers: amzn.to/3XJVqIF
Desktop Spacers: amzn.to/43iumBA
Pixel Art Frame ~ Divoom: amzn.to/3D5l7Kj
😎 Recording 😎
Tri-Pod Camera: amzn.to/2UWRlFd
Gimbal Camera: amzn.to/3XJuoRB
Gimbal: amzn.to/43b6v6I
Remote for Camera: amzn.to/41R5X6r
Box Lights: amzn.to/3IU8Bj5
👍Amazon Affiliate Links 👍
( When you buy through an affiliate link, I may receive a commission on the sale - as an Amazon Associate, I earn from qualifying purchases. Prices of the products do not change because of the created link )
---------------------------------------------------------
Socials:
My Discord ~ / discord
TikTok ~ www.tiktok.com...
Twitch ~ / dankamyouknow
Instagram ~ / dan_kam_you_know
---------------------------------------------------------
Business Inquiries:
Dankamcontact@gmail.com
Thanks for watching! There is one thing that I forgot to mention: The grommet in the back of the case, is for your GPU monitor cables! You feed them through your grommet towards the front of the case, and then into your GPU. You have to take off the rear panel to connect them
Check out the links below for what I used in the build:
Case - Lian Li Sup01: amzn.to/3yajJXS
CPU - AMD 7700X: amzn.to/3Yk9fzR
GPU - PowerColor Hellbound RX7800XT: amzn.to/3YhILz0
Motherboard - GIGABYTE B650 Aorus Elite AX: amzn.to/4fjWcVl
Storage - WD Black SN850X 2TB: amzn.to/4daEH7V
RAM - TEAMGROUP T-Cerate 32GB 6400MHZ: amzn.to/46iCOnq
AIO - GIGABYTE AORUS Waterforce II 360mm: amzn.to/3ye1dhp
PSU: NZXT C1200 White: nzxt.com/product/c1200-gold-atx
Appreciate the support,
Danny
can i get a pc
@@X._edits.98 yeesh he is not that rich yet go beg linus or something
But you mentioned that😂😂😂
Hey dan is HP Omen Z590 good ? Becuz i found one for 30 euros
@@notcheeto_legit I mentioned it, but I didn't actually show the monitor cables going through the grommet and into the GPU
You started unscrewing half the case and my brain was just like: wait hold up huh wha wha no what hold up 🤯
I like this comment uts funny
This guy pumps out some of the best content ever for pc hardware.
Really appreciate you saying that ❤️❤️❤️❤️
I really like that style, the designer did a really good job.
The Rgb already preinstalled actually looks really good.
I agree, you can sync it to your motherboard as well so everything can match up!
this video made me appreciate non voiceover PC Building again, this is a real beauty you created here, that upright GPU looks AMAZING!
Love your videos Dan, keep doing what your doing ❤️
Thank you! Will do! Appreciate that ❤️
I think your style of filming the videos is very interesting and I mean that in a good way. It’s like a TikTok format with the dialogue but also a mix with just building. Really enjoyable!:) Great work
Thank you so much! Decided to bring my skit formula over to long form videos and I enjoy it way more =)
hey dan, i was just scrolling through your channel and finally decided to watch one of your videos, honestly i thought since these videos don't get many views compared to your shorts they must not be that good, but these videos are actually more interesting and more informational than most other tech youtubers videos. thanks for the amazing videos.
I thought a vertical mounted gpu was a more common thing. Maybe it's cause I've had mine like that for a few years. I wish i had the patience to do better cable management like you. Excellent video and build. Very informative, thank you!
Vertical is very common, I would call this an “upright” GPU mount, which isn’t nearly as common, especially mounted in the front as intake. Thanks for the nice words, appreciate it!
@@DanKamYouKnow One thing about upright GPU as intake is that you need to have the fans run all the time to get the MB components to get cool air while on.
@@Dragon6687 I've said it before, the negative pressure from 3 case fans on the back side do that. The front is purely for GPU intake, nothing more. It won't do much more than that.
Oh man that is so cool. I could have picked this up if I hadnt just finished my build
That's the best looker I've seen in a long time.
"So which case we looking at tod-"
"Get out"
-Kratos 2024 🔥🔥
GET OUT BOOOYYYYYY
sick build man. i wish i saw this before i bought my new pc case 😂
Thanks dude!
Literally put this build together a few days ago on parts picker for my first PC! I went with a micro atx motherboard and case though.
Great case, great use of space, good temps. Love mine.
love the overall quality of this whole video, especially the all white build
Thanks 🙏🏼
You made me change my mind from the h6 flow rgb to that case
i cheaped out on my case and regret it really really hard, this case is really interesting and awesome, I'm thinking of buying the black version of it
Without watching masterpiece 👀
👀👀👀
This was a pleasure to watch my dude. Very relaxing.
❤️❤️❤️
Such a piece of art!
You're getting fresh air at room temperature going straight to your gpu which is the main culprit for heat. This is going to help improve graphics performance. Or at least help the boost clocks stay at maximum.
Love the case i think im gonna have to buy it just because of that gpu getting fresh unheated air
Sickest cleanest build ive seen ...great job
you've got a new subscriber, great contents man
I like these guys they make a great team. Subscribed!!
This build is so clean
That thing looks so expensive. My lord. But it also looks cool. I'll never be able to afford anything like that, so I appreciate these videos that at least let me see it.
Nice amd Build very clean build as usual thx for entertaining us with your video ma boy
❤️❤️❤️❤️
always love these long form video
Thanks dude!
Looks cool with the gpu on the front!
YESSS DAN YOU ARE A GOAT KRATOS
Appreciate you my dude!
For some reason your videos have not been showing up in my feed. I assumed you were not uploading anymore.
So happy to learn you are. You're up to 340K followers! Congrats Dan. I was your 82nd subscriber if I remember correctly.
Hope you and your family are doing well.
What do you think of the ASUS ROG strix 4090 OC GPU? Just curious. Thank you.
Hey!!! Very long time! Of course, you were one of my earliest subs and members of the Discord. Is your son still enjoying his PC? The Strix 4090 is one of the best GPU’s out there, can’t go wrong with it. I run the 4080 Super version of that card and it’s fantastic.
I didn’t post for months but my socials really started to blow up when I started making short form skit content! Now I’m back in a groove and uploading more frequently, especially with the recent traction.
Good hearing from you!
"I am done with the build my boy!"
Me personally do not like installing a upright GPU mount but I do find it interesting. Also amazing vid keep up the good work!
Like Li Li said some day, life is enjoying what you do alone! or with some gooood duuude
Nice video love watching these
Appreciate your support as always! ❤️
i’m more than sure that at least one person has done a line from this mirror
man that gpu is rocking something
?!?!?!
Mantap 👍👍
feel like im watching a pc building in a wildwest, cowboy type of thing with this BGM🤣🤣
I thought it was a cool song for the build. Don’t know what BGM means
@@DanKamYouKnow nahh, that's fine don't worry✌️, banger video tho!!. also BGM just stand for background music
👍👍👍👍
I feel like I’m Walter make his greatest creation in the new underground lab.
Is there room for push pull set up ? On the aio of course lol . LOVE the content keep it up.
There is not enough room for a push pull, possibly with slim fans but it would be very close. Thank you!!
I was scrolling past the video, then read the title "Upright mount?" Then i saw the gpu in that weird position and i was just like "i HAVE to watch this"
🗿🗿🗿
Cool build, love your channel mate. This case looks like a MASSIVE dust trap .... O the joys ;-)
With negative pressure, it will generate a bit of dust but I always recommend an air purifier in the room your gaming in. Makes a massive difference.
@@DanKamYouKnow Awesome suggestion, Quick trip to Amazon today 👍👍👍
"umm well akshually, mounting a gpu and an aio upright is a cooling friendly decision" - 🤓
but anyway yet another great white build and with lian li, no less. W free stuff, cool music and nice careful placement of the gpu 👍
Appreciate your comment! Thanks!
@@DanKamYouKnow It's no problem, Pc master builder 👑
My only concern would motherboard and M.2 temps since there's nothing blowing air over the board. That's what that rear fan is supposed to be for, but I've seen a lot of people forego using it.
Great watch as always baby lfg
Thanks B-Doo
My guy i came to you cause i know you are the best, i have a budget of 2500$ for a hight performance pc,what do you recommend for the better?(i could even go like 200$ over but imm keeping more money for the setup for a nice mouse,mousepad,keyboard,minitor and microphone)
HMMM I FEEL 100% THE AESTHETICS DEPENDS ON WHCH GPU YOU USE.
I bet building a PC to this guy is like building Legos.
I can’t tell if this is a genuine comment or that 100’s of people were mad at the fact that I said “Legos”.
My brother, I bought a new gaming computer, everything is new, but the power supply and its fan are very loud. Is there a solution or should I buy another power supply, knowing that I have ( color Master 650w)
Looks like Lian Li is rebranding to Ug Li and the CEO is writing a book called Why Li Why
This looks super distinctive but the cables on the gpu riser look really messy and janky imho!
Cool!
😎😎😎😎
Man take my like for you job, as for this case dislike minecraft construction
Does the aio get enough air with it being behind the mother board?
actually the temparatuer is very good
looks super intersting when you remove all the panels
Love this so much! How do you get to the GPU ports? Do you access from the bottom with 90 degree Display Port cable? Sorry if I missed it in your video. TY.
There is a grommet at the back of the case, in which you feed it through, and plug it in from the bottom. You have to take off the back panel to do it.
Where does gpu's air come out from? It goes down and then... And then there's just enough space for the air to "reflect" from the bottom of the case (idk how air works) and then be exhausted by the triple fan on the back side?
i have 4 problems, 1 the cable of the ryzer cable that gets out of the case , 2 the front plate is mesh and can't be glass due to not having airflow, I'd really like to see my gpu, 3 it being negative pressure case and 4 the gpu being the only intake fans, if they were able to put fans on top and if there was a removable dust cover in the back where the aio would be, it would just be perfect, a bit too many fans , but still awesome design
The front is not intake for the case, it's for the gpu. It's a non issue. The negative pressure will draw air over the vrms ram etc. Temps are fine.
You're getting fresh air at room temperature going straight to your gpu which is the main culprit for heat. This is going to help improve graphics performance
@@weedless9531 i bought the case thanks
I know you dont do this but can you please make a good 1600$ gaming pc for me? Im looking into building my first one and this is probably the budget.
Segotep T1 Full-Tower
hey man I thought you gotta cross tiring those cpu cooler mount for even pressure, not sure if that's even matter on this platform lol
It’s just what you see on camera. I always cross tighten in person on every build. I couldn’t be bothered to edit it in the cross pattern method.
Idk how much I like the fact that the only air coming into the case mmediately gets heated and randomly dispersed through the chassis, besides, what if I want to run it at 0 rpm when not gaming?
That's not at all what happens. The GPU exhaust gets immediately exhasted especially if you're using a Founders Edition. None of the air in the case is hot /used air. You can go ahead and run the GPU at 0 RPM idling because the front is for the GPU not for the case.
@@insertnamehere4419 exhausted where lol? Air comes in from outside the case, through the gpu radiator fins and gets p[ushed out towards the glass and back panel inside the case, there's no other intake as he says, besides a founders edition of what? That's an AMD card in the video they don't really have "founders edition" Sapphire makes their base models. 90% of people don't own Nvidia FE cards..
@@ermutanda3802 What do you mean where? Outside. What do you think the 3 case cans RIGHT beside the GPU are doing? Whats the mesh on the side for? It aint for intake. The GPU is not case intake, I wish people would stop saying this. Negative pressure is the case air flow, the front is purely for the GPU. PS I'm not just a TH-cam comments hater, I actually own this case. Temps arent just OK they're fantastic.
Just subscribed to you ❤
the entire intake is from the exhause of the gpu is kinda bad personally. Those Intel newest gen would actually be mad. i would assume that this case is not for top end machine
Huh? The GPU gets fresh front intake, and the exhaust gets pulled out by the 3 fans on the side. It's not a bad design, quite the opposite. Great design for Founders Edition cards too.
Watch as that case become obsolete when the 5 slot cards come out.
Wait until the 10 slot GPU’s come out
@@DanKamYouKnow By then you need to house the GPU in its own case along with it's own PSU because 10 slot card won't fit.
@@insertnamehere4419 You didn't get the joke. GPUs have been getting wider and longer with each new series of GPU releases as the years go by. Meanwhile if you were using the other pci slots on your MB, you'll loose access to them because the GPU will cover them up. Some users had to replace their entire case just to fit the 3090s and 4090s in the case.
W video🔥🔥🔥
I didn't understand how you just simply put the motherboard into the case and it didn't fall off even though you hadn't screw it to the case before you released it. Motherboard just sticked to it. What
I have a question it’s abt booting up my pc. When i turn on my pc everything seems to be working just fine but on my motherboard i do get s white light where it days boot, and on top of that when my monitor turns on i get directed to my bios but am not able to move my mouse cursor. Do you maybe have any ideas as to why this happens?
Nice vid. Do you know how much input delay the riser cable adds by the way?
Zero delay.
lol zero. If it did no one would use them.
can you build with the jonsbo d41 :D
Hi
im trying to conected my second monitor but theres only 1 available output on my graphics card and is VGA, because the HDMI is already connected to the first monitor. And the inputs on the second monitor are HDMI, VGA, and DVI
Which cable/adapter should I buy, or what do you suggest? I would really appreciate it if you could help me. :')
Weird Case makes no sense, but I guess as long as the case is MESH they you can place fans only as exhaust.
Looks like a B650E mobo too me tho🤔
Correct, the GIGABYTE AORUS B650e AX ICE
Not sure if your gonna see this but I have a 3 month old 4070 ti that just started making a vacuum cleaner type noise on boot. Not sure what it is I don’t think it’s the fans. Temperatures are fine do you have a diagnosis on this? Been looking everywhere I can’t find out much. Thanks
With the computer off and you manually spin each fan, do any of them make noise? Does it only happen on boot and it goes away?
@@DanKamYouKnow hey so i bit the bullet and took out my gpu and the noise stopped. Also the noise went away at first now it prolongs until the pc is off. Its a gigabyte 4070 ti and its still under warranty so im sending it back to cali. Its a brand new gpu which is very frustrating. Thanks for your reply man love your content. Guess its integrated graphics for me until they send it back!
@@BuffGuy71 Hopefully it's a quick return for the new one! I had to RMA a GPU several years ago and got my new one within 5 days of shipping the old one!
@@DanKamYouKnow Hope so just dropped it off at UPS today had to pay $26 shipping ugh lol
Very nice! Just not a fan of white.
Bro I have a problem my mouse shutters and lag in game and also on fast camera moving in games. I have tried everything like get a new mouse , installing kernel os and etc. but it didn't fix . I have nvidia gt 610, 16 gb ram, ryzen 5 1600 six core processor processor. And I also disable mouse acceleration like I have done everything but it doesn't fix . I also changed my USB port. What should I do ? I also have good psu
How’s the temps on your VRM and ram?
Which one should I get a 4090 or 4080? Il only be playing in 1440p. Iv got the 3070 currently and just not satisfied with it.
is there a room for a hard drive?
I have a question is there a pc that has room for decor inside (like a funko pop) that could fit a 4090? And also could any motherboard fit in it?
I would say, look at the HYTE Y70.
Hello, I have a small problem on my new pc… I have upgraded the bios and now my pc is starting sooo slow…. Even the fast boot is enabled… anyone has any idea for me please? And thank you
Hi Dan my name is Aaron Ive been watching your for quite a while now and you have inspired me into building my own pc but now im struggling a bit because i dont know which gpu to get. My budget is around 320 just for the graphics card and Im trying to look for one which will serve me for gaming and for working in 3d renders, I you could help me out I would appreciate it very much.
For about $320, I’d probably go with a 7700XT. Thanks for your support on my videos!
Hello friend im here to just tell that you are absolutely amazing and i love your job im 22 and i really want to be like you (chill tech guy)
❤️❤️❤️
Do you know how can i fix high cpu usage low gpu usage
temp's will be extremely higher if you use this mount.
this case really doesnt look to good estedicly with the 24 pin and the pcie cable coming out the same place
Does it have space for an air cooler rather than an AIO?
Nope, only AIO
kind version of god of war
13:33 It's not bad, but it's not quite nice
How would did do with Nvidia reference cards like the 4080super or 4090?
It works great. Using a 4080 FE in it my self. ( same cooler as the 4090 FE). Btw, Founders Edition is not reference, a common misconception though.
@@insertnamehere4419 good to know, I have the 4080 super and want to transfer to this case from a y60 to save some desk space. For the record when I was typing my initial comment I literally blanked on the FE name so that’s why I called them reference lol
song name?
Bro i got an i5 9400 whats the best gpu for it and not very expensive
The best one you can afford that fits your desired performance.. It's not like theres a table for what CPU goes with what GPU. Your CPU is on the older side though for sure.
Aside from the GPU being that way it's not really that impressive of a case. It looks the same as all the most recent cases that have came out with glass and white lol
Temps? Can't be good on this case surely?
Covered at the end but the Ryzen 7700x hit about 82c during benchmark (with a slight curve offset adjustment to PBO which I do for all my Ryzen CPU’s) and 68c for the PowerColor RX7800XT. Honestly, MUCH better than I expected
A Lian Li case that's not a fish tank......................blashphamy
I think you mean HYTE.
👀👀👀👀
is it good looking ? I ve just seen the worst looking PC
K
Get your eyes checked. Much better looking than that dumb fish tank.