DIY Bluetooth Gamepad -
ฝัง
- เผยแพร่เมื่อ 24 ก.พ. 2015
- In this project we’re building a DIY gamepad using the Bluefruit EZ-Key module and a 3D printed case.
The Bluefruit EZ-Key HID keyboard controller is a bluetooth breakout design for making DIY keyboards and game pads. It’s requires no programing and works with just about any trigger or push button. It takes up to 12 inputs and can be powered with any 3-16 VDC.
Check out the full tutorial
learn.adafruit.com/diy-blueto...
Download STLs
www.thingiverse.com/thing:686275
www.youmagine.com/designs/diy...
cults3d.com/en/game/diy-bluet...
-----------------------------------------
Visit the Adafruit shop online - www.adafruit.com
Subscribe to Adafruit on TH-cam: adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: adafru.it/showtell
Watch our latest project videos: adafru.it/latest
New tutorials on the Adafruit Learning System: learn.adafruit.com/
Music by Noe Ruiz: / ecken
----------------------------------------- - วิทยาศาสตร์และเทคโนโลยี
![Use A Raspberry Pi Pico as a HID [Gamepad, Keyboard, Mouse, and Multimedia]](http://i.ytimg.com/vi/__QZQEOG6tA/mqdefault.jpg)
![🎮เกมยิงปืนใหม่ ภาพสวย และ สมจริงที่สุดในโลก [ BODYCAM ]](http://i.ytimg.com/vi/My3l1owRY9I/mqdefault.jpg)
*DIY Bluetooth Gamepad*
blog.adafruit.com/2015/02/26/diy-bluetooth-gamepad/
In this project we’re building a DIY gamepad using the Bluefruit EZ-Key module and a 3D printed case.
The Bluefruit EZ-Key HID keyboard controller is a bluetooth breakout design for making DIY keyboards and game pads. It’s requires no programing and works with just about any trigger or push button. It takes up to 12 inputs and can be powered with any 3-16 VDC.
The Perma-Proto comes in different sizes which is perfect for making all sorts of projects. The ½ sized Perma-Proto breadboard is like a business card and which makes it perfect for making a small game controller.
If I added 6 more buttons in a certain order could I make this a PS3 controller
Hey. One question , can you tell me stuff that joins wires without using solder. Please reply. Thank You.
I would like to make the exact same thing but with an analog stick instead
can you do a controller with LB,LT,RB and RT as well please
+Adafruit Industries
What was the game you played?
Okay. Speaking of which. What about ''Trog!'' controllers? Rex's buttons is red, Bloop's buttons is blue, Spike's buttons is yellow and Gwen's buttons is pink
Да
❤❤❤ I like this how you put the gamepad together.❤❤❤
This is way cool! I'm actually in the process of building a GB-Zero at the moment, but my next project will be an actual console build based around a Raspberry Pi 3 and I really wanted to go down the route of Bluetooth wireless controllers - thanks so much for this! :D
And I also liked how you tested the gamepad.
Admirable soldering skills there, Noe - this video is worth watching for that alone. 👍
I'm in the process of turning a nerf longshot into a virtual reality controller with a wii remote with motion plus for mouse controll and a nunchuck in the grip.
I have come to a conclusion that I've run out of keys with most games. And this is a perfect idea for me to incorporate more.
Why didn't I find this earlier!
please make tutorial like this again about Bluetooth portable speaker
I like your game pad that is so so sooo awesome. Very good.
Thats actually pretty badass..
Also the gamepad reminds me of the NES controller.
thank you
love the idea of this but setting up a floorguitar pedal with 12 inputs for things like iPad apps that use keyboard inputs, like Loopy HD
Would this be able to connect to an xbox one system? I would love to learn how to make them. I am loving all the videos here on the channel. Man if i learn coding and Adafruit electronics, I am going to start calling myself TheCreadax3D. LOL. awesome vid, i learn alot watching these. keep up the awesome work.
Really cool!
Hi, very good job, a question, what programs do you use to do the design in cad ?, greetings from Mexico and see you soon.
What a cool project! Thanks for sharing!
l could remake that into a mini fighting game controller. With 6 buttons on the right. And the Start/Select buttons would be on the top, just to avoid design complexity.
This is sick
I only wanna learn how to make so much DIY’s
Excellent!
It might work on iOS on icade compatible games if you follow icade standards. The icade just uses keyboard key presses for for button press button release. If you can program each button to be a key...
Thanks for the tip!
Wish I could like more then once!
Can you make a similar tutorial for this same controller, but using a Circuit Playground Bluefruit? Getting stuck on setting it up for this particular controller - thanks!
Love the project!! Would I need to change anything to add two buttons as LB and RB at the top? Aside from editing the stl of course.
Don't think so. Just connect the 2 extra buttons to ground and 2 free input pins and it should work fine
Great video Noe!
Thanks Nick!
That guitar one is cool.
Looks awesome man ! I stumbled upon your page and you are so cool. Keep it up !
superb kollo
Everything is so clean and perfect, like damn!
Is there any software involved with this? im a little confused how you program what the buttons do
You can press all the dpad buttons down at once, just wanted to point that out. I just made a snes controller last month, designed my dpad so i went through figuring that out.
Cool none the less. Mine i didnt store the arduino in the gamepad, it hooks into a bus im creating that you can plug in any old retro controller into and use as usb. Also working on making it able to plug into a nes, and possibly a snes.
ur genius,dude!!! liked, düster subscribed
shared*
So cool
Awesome Bro........
Very Nice Bro !!Like !!
I'd love to make this as long as it's not Bluetooth though because it lags like crazy but if it was USB I would be fine with.
Are there any new alternatives to the Bluefruit EZ-Key - 12 Input Bluetooth HID Keyboard Controller - v1.2 now it’s been discontinued?
It looks really nice but I am wondering how does the printing cost of the whole enclosure compare to buying a standard enclosure. I mean it makes sense to print it when you need a special shape but why would you print a brick-shaped enclosure when it is available off-the shelf?
Having a 3d printer is my dream :)
Excellent video as always Adafruit Industries ! At about 2:54 there is heat shrink applied like "tape" around the wire bundle. Care to share the secret here? :) Great work. Cheers
***** I meant more of how it is heat shrink tape instead of the standard tubing. Not an overly well known technique I'd bet. Could be wrong.
Eric William Sure, it's just a piece of large sized heat shrink tubing that I cut down the middle and wrapped it around the wires.
When's the new rev of the bluefruit ez key coming??
Adafruit Industries is there a way for me to buy one of these from you or the website? I don't have the ability to 3d print or soldering iron. Sorry if this question has already been asked before
Awesome tutorial where can I learn basics of electronics and working with breadboards for projects like this?
I just finished making it I just have a different dezign but it works
any lag?
brett keen no
Wait. What PLA cooler design do you use on the printer shown in the video?
Cool video ! Just wondering does it work with iOS ?
do you think I can make a receiver with a bluefruit, connect it on a raspberry and use 4 gamepad like this to play a game with my friend? or i need to use 4 receiver?
What if I wanted to add 2 analog sticks and an l1, l2, r1, r2 buttons and an a,b,x,y set of buttons?
What game did you played in the video?
I'm curious how this trigger game on the phone. I know it connect using Bluetooth but I mean the smartphone's game is onscreen touch so how does it know what button is pressed? Is it something programmed for specific game not any game can use this controller??
is there a way to add 2 more buttons? Its because I want it to play SNES
Cant find anyone asked for it, so here goes.. What game is that? Looks lovely, especially with that 3D printed controller which looks awesome!
Super Mega Worm!
Adafruit Industries Sweet, thanks! =)
Darude-Sandstorm
i think its nubs world
I noticed that there are only 12 inputs allowed on this device. Is there a way to mimic say a gamecube controller over a bluetooth board. It would need 2 joysticks a d-pad and 8 buttons?
yeah but you need a bigger bourd
Could u make this in altoids if’s tin with a teensy
What kind of analog stick can be used? I'd like to make my own ps-inspired controller. Thanks.
I want to make a wired (usb) version of this with Arduino pro micro. Any ideas or suggestions?
Brother this video is super video😎😎😎😀🤗
How about the feeling?
How does the computer recognize the inputs from the controller? How are they mapped?
I'm gonna make a phone case out of this :^)
Can I just buy the power parts and use an old wii pro controller?
Can I have a link of your blue prints for the 3D printer?
Very clear guide!
do you have a telescopic controller project like this (nintendo switch controller type)?
It will be cool in nintendo switch design :D
Is there a way to make this a wires USB controller instead of bluetooth
Can I make the same thing but with 2 joysticks and abxy buttons ?
very well
Do you know how to make one that has bumpers and more buttons
how do you connect a stick? why you only make one with 12 input, if i want tomake a 3DS emulator, ineed 14input, make one biger!! plz!!!
easy for you Bro...
can you make a controller and like mini tv consel out of them. ?
the Bluefruit EZ Key doesn't seem to exist anymore.. everywhere I've looked suggest it's discontinued.. anyone know any alternatives?
Cool tutorial...just wondering can I build 2 of these to work with my raspberry pi 2??
if so how??
It might work with a USB bluetooth module, but that may require quite a bit of setup.
How do you make a wired controller wireless? I want to get a USB sega genesis controller, but I hate wires.
Check these videos out by Evan Kale
th-cam.com/video/mt8uF9IblUU/w-d-xo.html
th-cam.com/video/H0JaLWahDC0/w-d-xo.html
Thanks. Do you know if that will work with any controller? I'm not working with a PS2 controller. I'm using a sega genesis controller
Have a look at this, he made this to turn USB mice and keyboards to Bluetooth, I don't know if it will work with a controller
TheMasonGamer And ParkerPro Sorry, I didn't post the link, here it is
th-cam.com/video/UJaqHnPR-XE/w-d-xo.html
@@amirsamir302 Links dont work you idiot!!!
Can I make something with analogue sticks or the sliders (like on the 3ds) and more buttons so I can have a full controller instead of a NES layout?
+Jeff Wenz yep you could but you would have to do the wireing and make a new case
I would love to see a Bluetooth Snes controller
Then make one this vid tells you how to do it
Total newbie to the world of micro processors here. Is there any way to program this EZ-key to transmit MIDI messages, instead of just keyboard keys? thanks to anyone.
subscribed!
I'd love to make a little arcade mount for my android tablet with this, like the one shown to the right at 0:53! It'd be awesome to hook it up to MAME and configure it to play the games. Is there by chance a tutorial on how you built that one?
hi all together can someone tell me where to buy the module ( Bluefruit EZ-Key module ) thanks for Help
Can this be used to connect to a Pi via USB. I want to make my own conrroller for a Retropie console.
I want to build a Gun Gamecontroler with my friend. Its ment to be suportable for vr. and as cheap as possible.
Is the bluefruit module capable of handling joysticks (C-sticks)? Or is it only capable of digital inputs?
Yah, it works with joysticks that use micro switches.
bro what about l1 and l2 buttons.
cool
Thumbs Up! Shared! Noe rocks!
tu trabajo es muy bueno, la verdad me gusto mucho sigue asi!!!
could i have a tutorial in how to set the keys up?
(like that start button is foe example the x on the keyboard)
theares a way to make this bus using an arduino and a bluetooth module?
does this work withraspberry pi B2 and the IOS arcadepi
tutorial in reprogramming a controller? please....
is it compatible with the latest Android, as of now.
Hi man. Can u make a video on how to turn redgear elite gamepad to bluetooth gamepad. I will really appreciate ur help.Thanks man
super dope channel!!!
Looks like Bluefruit EZ Key is pretty much not being made anymore, so I was thinking of making this with the Feather 32u4. Are there any tutorials as good as this one for making it work as a bt controller?
nah
Mom yes FAMICOM.
can you make two bt controllet for me and brother to play game
Does this work with raspberry Pi on retropie
Is it possible to make a game pad that could connect and play on the ps4