Just take all the brakes off and put your feet down to stop. Can probably get rid of those handlebars and put on a pair of vice grips. Also skip breakfast.
@ejrperformance. Must say love the way the bike turned out in its final videos but had a question about the brocks performance strap. My question is if i go with a single side rotar and remove my brake caliper like in this video... are you using a spacer from the brocks strap bracket mounting to where the brake caliper went?
i removed all of the rotors and gutted the supension on my gsxr and went from 187 to 189 top speed. i cant track it without brakes but it works for the interstate.
Good video. What I hate is the placement of the muffler can. Why not somehow find a aftermarket system that has the the muffler poking out between the rear wheel and the swing arm axle. Definitely makes the bike look more tight and not so moonshine still looks.
Why did you take off 1 rotor in the front and the rear one as well? Sorry if this is a stupid question but that fast of a bike and only one rotor, doesn't make sense to me but I am still a new rider.
@@MrGrey-pq6hp I know it’s for weight savings but it just doesn’t make sense to me because it feels like it’s not that much weight on the bike, And I rather have that stopping power. If he is really worried about weight savings, maybe it’s better to loose a lot of body fat 🤣
Hey I'm putting an s1 sc project exhaust on the same bike. Looked for a power commander to remap the ecu with no luck. What do you suggest??? I just want to unlock this bikes full potential but nothing crazy. Thanks!!
brianmathew09 did u notice the tiny rear sprocket he had on there? Ask how many teeth he is running on both front n rear as That will solve your problem
What purpose does the rear break serve for straight line racing? Absolutely non except maybe wheelie control but other than that the rear break serves no purpose for these guy.
@@moondoggy-24-7 hey bro im not saying removing the rear break is a smart move im just saying that it serves these guys no purpose keeping the rear break intact and only adds a tiny bit extra weight. im no weight weenie so i couldnt care less about removing every little bit of weight to improve my times but i do understand why these guys do it. to each their own. btw the zx10 in that video might have clocked better times without a rear brake, but i guess we'll never know lol
It really depends on what type of mods you're considering and what your wallet can withstand honestly... You can upgrade it to be faster than the newer bikes, just going to cost you.
First time seeing this guys video but looks like this guys doing a drag build cause of the brakes being removed and plans for a swingarm stretch for what he is doing its a good plan but man removing brakes is scary af not something you should ever do if you ride on the street or track
Dont knock it till u try it. A single 330mm rotor with a set of good pads will make this bike do a front flip if u try. I promise its still an insane amount of stopping power. Every single person has been amazed how their single front rotor with good pads stops better than 2 front rotors and stock pads.
@@EJR-Performance but you forget that you 've got only one set of discs and pads to fade, on constant abuse, like on track day.. Question is not "will it happen" it is "when" 😕
Just take all the brakes off and put your feet down to stop. Can probably get rid of those handlebars and put on a pair of vice grips. Also skip breakfast.
😂😂
Bro Fr😂
The burst of laugh right now is due to YOU 😂😂😂 you’re inSANE 😭😭😭
Beautiful bike man. I havent really been much of a fan of most of the newer designs but I have to admit this bike is a beauty forsure
Let us know when you post the race against the BMW....
I wonder how the ride quality is on public roads with it being lowered so much.
I would like to know how you went about mounting your phone in such a convenient way along with the gpr.. Can you provide a few details?
Can i run single brake rotor with the ABS brakes system on my 2019 zx10r?
What mount are you using to hold your phone on the bike? That's dope
Velcro tape
that bike is very sharp looking.. i like
@ejrperformance. Must say love the way the bike turned out in its final videos but had a question about the brocks performance strap. My question is if i go with a single side rotar and remove my brake caliper like in this video... are you using a spacer from the brocks strap bracket mounting to where the brake caliper went?
i removed all of the rotors and gutted the supension on my gsxr and went from 187 to 189 top speed. i cant track it without brakes but it works for the interstate.
3:07 thank me later
without a rear brake, if you have to stop fast, wouldn't that flip you over the front?
The legend is making a beast out of this bike hell yah!!!!!🏍
Is your phone on with velcro?
Is that A full exhaust system?
Where can I find that air inlet tube? Bike looking badass btw!
Is there a phone mount for your phone to sit on your tank there or is like a magnetic case ? I was looking online but couldn’t find one .
Good video. What I hate is the placement of the muffler can. Why not somehow find a aftermarket system that has the the muffler poking out between the rear wheel and the swing arm axle. Definitely makes the bike look more tight and not so moonshine still looks.
rises the center of gravity too high. under seat mufflers are only for style, not for function.
Why did you take off 1 rotor in the front and the rear one as well? Sorry if this is a stupid question but that fast of a bike and only one rotor, doesn't make sense to me but I am still a new rider.
He did it for weight saving. Rotating mass i guess. I seen moore mafia does this on his bikes. Idk if its a good idea for street applications though 🤔
@@MrGrey-pq6hp I know it’s for weight savings but it just doesn’t make sense to me because it feels like it’s not that much weight on the bike, And I rather have that stopping power. If he is really worried about weight savings, maybe it’s better to loose a lot of body fat 🤣
What phone holder do you use?
What phone mount is that?
Hey evan,how much money did that guy spend on that bike for you to do all that work.
Is this on pump 93?
is this with stock gearing?
Hey I'm putting an s1 sc project exhaust on the same bike. Looked for a power commander to remap the ecu with no luck. What do you suggest??? I just want to unlock this bikes full potential but nothing crazy. Thanks!!
Just seen ,no bar ends? Wind resistance?
Is removing the brakes just for weight saving really a good idea
Not unless u fully trynna roll race pointless
Does it affect the braking performance on only one rotor
Very fast!
What’s the 60-130 on S1000RR bikes?
Slower lol
What’s the color of the integrated tail light?
What was the number on the dyno?
Badass looking bike
Love that gray color
what's the helmet? it's so hard to find green ones now
Cool video .I'm assuming this bike is not seeing much or any track time.but it is a nice bike
if i wack my zx14 like that in 2nd...she shoots for the sky
brianmathew09 did u notice the tiny rear sprocket he had on there? Ask how many teeth he is running on both front n rear as That will solve your problem
Shit if I shoot my fz07 like that in 2nd she comes up like a stallion
thats because your bikes arent set up correctly for going fast
HEYY EJR bro what the Defferent of the ZX10R and ZX10R SE &ZX10RR / and what do you think about ZX10R SE
What do you think about the swingarm extensions blocks?
Where are y’all located?
How much weight can you possibly save taking out the rear brakes? Its not even worth the danger dummy
Lol, very common mod. Take your ignorance somewhere else
What purpose does the rear break serve for straight line racing? Absolutely non except maybe wheelie control but other than that the rear break serves no purpose for these guy.
@@moondoggy-24-7 hey bro im not saying removing the rear break is a smart move im just saying that it serves these guys no purpose keeping the rear break intact and only adds a tiny bit extra weight. im no weight weenie so i couldnt care less about removing every little bit of weight to improve my times but i do understand why these guys do it. to each their own. btw the zx10 in that video might have clocked better times without a rear brake, but i guess we'll never know lol
Can u adjust quick shifter if I already have a flash from some 1 else
5,3 can ride on it?
Where did you get your solid seat cowl from?
Just wondering why the Q3 on the front and not a Q4 like the rear?
They dont make a q4 120/60. Need the smaller tire profile
Have u changes radiator hose
How do you get your smart phone to sit on your tank like that?? Also where do you keep your tag holder??
The 10R has a recessed area when tucking, your chin should be in. And velcro or a magnetic strip to secure the phone.
my fan Zx10r.. very nice
Only one rotor?
Why 180 on the back? Where are the bar ends??
weight reduction
Bad positioning of Camera, Could not see acceleration !
Love what you do but can u mount the camera so we can see better plz n thank you! Love watching your channel
What gear are you starting in?
Pause the video. He is always in 2nd Gear, Traction Control off.
Hey did you lower it for aesthetics or personal preference?
I think he lowered it for performance. Lowered bikes are harder to wheelie meaning you can accelerate harder (which is what he's aiming for).
Dude that thing is bitching 🔥🔥🤘🤘
That looks dope bro
Ive got rotorbox wheels on my 14r
Soo awesome
I love your bike bro! More power to you! Your new Subscriber Ronald
What phone holder is that?
Velcro
we would see run against other bike, yamaha r1and bmw, not just alone launch.
GO KAWASAKI GOOO!!!
True
Question: I have a 2008 zx10r. Is it worth upgrading the bike or is it too slow to keep up with newer bikes even with mods? Thanks
Jonathan Pontel If your trying to keep up with these bikes it won’t be keeping up. It’s still a fast bike.
Same displacement just tune it and cut some Weight and rip these streets 🏍💨💨🤙🏾💪🏾
@anonMS dawg yes sir... Me and my Gen. 1 do work people say wasn't possible.
@anonMS dawg what bloodline is the terrier in your profile pick????
It really depends on what type of mods you're considering and what your wallet can withstand honestly... You can upgrade it to be faster than the newer bikes, just going to cost you.
First time seeing this guys video but looks like this guys doing a drag build cause of the brakes being removed and plans for a swingarm stretch for what he is doing its a good plan but man removing brakes is scary af not something you should ever do if you ride on the street or track
Dont knock it till u try it. A single 330mm rotor with a set of good pads will make this bike do a front flip if u try. I promise its still an insane amount of stopping power. Every single person has been amazed how their single front rotor with good pads stops better than 2 front rotors and stock pads.
@@EJR-Performance but you forget that you 've got only one set of discs and pads to fade, on constant abuse, like on track day.. Question is not "will it happen" it is "when" 😕
Nice what was the 100-150mph times?
racerxvids less than 5 seconds
What does taking all the brakes off do? Sounds unsafe, definitely the right name “Babayaga”
Would probably be quicker if you started in 1st, The new ZX10's are impressive
Fast bike for bolt ons and high 3s
Bobby for short?
It's pronounced 'Ya-ga', not 'Yega'. That's basically the boogeyman of Eastern Europe/Russia and it scared the shit out of me as a child.
Heretic Anthem it’s also John Wick 😆😵
Hope it runs better than bitch ninja after all the modification
Maybe you should build a TFT screen for Kawasaki. Come on it’s 2019. Fail on Kawasaki. Nice looking build though.
Maybe i will
why in the ever loving FUCK would you remove a brake rotor on a 200hp machine
Finally
180/55??? Noooo
Acabou com a moto.
tri state beast ya some haters
Kawi sucks now,the 06 -08 where the best
In which way
Uh the 2019 zx10r makes the most brake horsepower out of the other japanese bikes
the new kawasakis are the best by a long shot. this bike at like 60% throttle woild walk an older zx10r
Mike you are just a troll, nothing to justify your comment, just pure bullshit bro! I guess you just can't afford a new one!
Баба Яга