Nice job man. Whats it sound like? I have an AMR500 setup on an mx5 and its earsplittingly loud. Also what your pulley ratio and how much boost does it make?
Hi I'm thinking to do this to my 1.3 4g13 colt, did you not have to remap the ecu or give it a tune? How is the car running now since the superchather was installed? Trying to get as much info as possible to do this myself, cheers man thank you and what type of bhp Increase did you get if you know
Unfortunately there is not much room for it to go anywhere else ! I did experiment with it going behind the alternator but in the ned it was easier to remove the A/C system :-)
So did you get any gains from this ? Nice job by the way. I been planning out a amr500 build on a 100hp 1.9l hope to get around 5psi of boost out of it. Did you hook up a gauge yet. Any feedback ? Very interested. Thanks.
I know im randomly asking but does any of you know a tool to get back into an Instagram account..? I somehow lost the password. I would love any assistance you can offer me
@Harold Charlie i really appreciate your reply. I got to the site on google and Im waiting for the hacking stuff now. Seems to take a while so I will get back to you later with my results.
So underneet Supercharger is hole from where supercharger takes air and what is that on left and right? ...there is 2 holes what is that for 1 of them is for connecting supercharger to intake and other one? and do i need put hight oil presure so it gets oil ?
The AMR500 has one intake and one outlet depending on which way you mount it. If you mount it like I did with the drain plug facing down you will have intake on the bottom and the out on the top. These superchargers have there own oil reservoir built in which must be changed when you change your oil.
@@wildfrog5803 It is special oil, I personally use penrite 75w-85 as it is the same as your gearbox (If you have a manual) which works great, be very careful to not overfill it.
hiya mate the engine bay says 4G13 engine but the the certification says 1.5L engine so did you swapped the engine to a 4G15? was it difficult the certification paperwork?
The 4g13 and 4g15 are the exact same engine with the 15 being a larger bore and stroke. I bought the car with a 4G13 build plate but a 1.5L engine, certification was super easy.
![[SHORT FILM] 1997 Mitsubishi Mirage](http://i.ytimg.com/vi/vAEkROAM9-8/mqdefault.jpg)
Damn that's dope
Hey did you get a tune in the end? Or what did you do in doing a 1.8l lancer but was quoted 4k for a dyno tune needed a aftermarket computer
hope you have a part 2 soon!
Planning to this as a diy but im concerned do you install some belt tensioner? Cheers mate
listing of parts used supercharger fuel regulator new belt used etc???
How is the engine after one year of being supercharged? Is it worth it?. curious, thinking of puting a amr500 on my van.
I'm pretty impressed with this! do you figure you gained 25hp or more? thx
Hey im installing the same setup
The question is
Is this worth it?
Im mean boosting is good enough?
So how much did it increase the power, what kind of boost?
Been looking at them, ie cheap for a 2L engine...
You're better off with a 4g93 or 4g94
Nice job man. Whats it sound like? I have an AMR500 setup on an mx5 and its earsplittingly loud. Also what your pulley ratio and how much boost does it make?
Stock pulley 0.6bar.. what about urs??
0.6 bar on what engine ?
Hi I'm thinking to do this to my 1.3 4g13 colt, did you not have to remap the ecu or give it a tune? How is the car running now since the superchather was installed? Trying to get as much info as possible to do this myself, cheers man thank you and what type of bhp Increase did you get if you know
probably
Nice! I really want to make my mirage supercharged like this. What kind of supercharger that you use?
It is the commonly available AMR - 500 manufactured by Aisin :-)
@@outbackelectricalnz432 very interesting man. Btw, can I install this SC without removing the AC compressor? I want to keep the ac working.
Unfortunately there is not much room for it to go anywhere else ! I did experiment with it going behind the alternator but in the ned it was easier to remove the A/C system :-)
how is it holding up after all these years? assuming you still own the car
1.5??
Wassup man very interested on doing my fully built 4g93 can u please share the info of what I need
So did you get any gains from this ? Nice job by the way. I been planning out a amr500 build on a 100hp 1.9l hope to get around 5psi of boost out of it. Did you hook up a gauge yet. Any feedback ? Very interested. Thanks.
I know im randomly asking but does any of you know a tool to get back into an Instagram account..?
I somehow lost the password. I would love any assistance you can offer me
@Karsyn Avery Instablaster =)
@Harold Charlie i really appreciate your reply. I got to the site on google and Im waiting for the hacking stuff now.
Seems to take a while so I will get back to you later with my results.
@Harold Charlie it did the trick and I finally got access to my account again. I'm so happy:D
Thank you so much, you saved my ass :D
@Karsyn Avery no problem xD
So underneet Supercharger is hole from where supercharger takes air and what is that on left and right? ...there is 2 holes what is that for 1 of them is for connecting supercharger to intake and other one? and do i need put hight oil presure so it gets oil ?
The AMR500 has one intake and one outlet depending on which way you mount it. If you mount it like I did with the drain plug facing down you will have intake on the bottom and the out on the top.
These superchargers have there own oil reservoir built in which must be changed when you change your oil.
@@outbackelectricalnz432 thank you i figured out latter i was watchink wrong picture :)
is that special oil or same as i put in car?
@@wildfrog5803 It is special oil, I personally use penrite 75w-85 as it is the same as your gearbox (If you have a manual) which works great, be very careful to not overfill it.
hiya mate the engine bay says 4G13 engine but the the certification says 1.5L engine so did you swapped the engine to a 4G15? was it difficult the certification paperwork?
The 4g13 and 4g15 are the exact same engine with the 15 being a larger bore and stroke. I bought the car with a 4G13 build plate but a 1.5L engine, certification was super easy.
@@outbackelectricalnz432 Iv a 4g13 I want to do this too would u make all the stuff for me like this if I pay you an pay for shipping?
Can we do this without removing of A/C
I also want to know.. please help
Sohc or dohc engine
Nice work Dude, though not smart posting a video with your vin. Just like when you sell a car online you block out you license plate
I've never blocked out a Vin number or license plate number, it's just a car.
The pully is way to big on supercharger need to be two inch at least to build any usable boost.
False.