How To Make A Yellow Ranger Helmet! 3D Printed Power Ranger Helmet Tutorial
ฝัง
- เผยแพร่เมื่อ 10 พ.ย. 2024
- Its finally here! How to make a yellow ranger helmet! This is the last of the 3d printed power ranger helmets that i needed to finish my collection! I'm so pumped to finally have all the mighty morphin power ranger helmets done! Hopefully this tutorial helps you complete your set!
Thanks for following along and watching my other How to Make Power ranger videos!
Want to support the channel?
Amazon Wishlist:
www.amazon.com...
Patreon:
Patreon.com/Quest4nostalgia
Paypal Donation:
www.paypal.com...
Socials
Instagram: @SaturdayMorningProps
discord: / discord
Materials Used:
Faceshields: amzn.to/40kAJCR
WeldingMasks: amzn.to/3mIb2hS
clasps: amzn.to/41zSwa3
#3dprinted #3dprint #powerrangers
20% OFF ALL DO3D FILES! code: Q4N20 ALL MMPR have been updated with new features!
Are you all ready for the 30th anniversary special?!
Veryready. We are doing some labor work all day tomorrow . Hoping to celebrate with the Anniversary special after.
@@MotoZom-B can't wait! Hope you have a good time relaxing after
I am beyond excited and I can’t wait for them to release more Tommy stuff besides an action figure, like a Green Ranger helmet and a Master Morpher. Well I hope they release that.
@@Theguys1212 they definitely are doing the Morpher, they have to be releasing a green
Man that yellow looks like a perfect color! It really pops
Thanks! It was pretty tough figuring out what i liked, best some were too pale but kinda fit the early 90s washed out vhs look but i think this one turned out well
Cudos for pushing past that paint failure and completely restarting the sanding! That sounds like a project killer for sure. Looking forward to seeing the next projects 👍
Yeah i also printed a second kit just in case the sanding it down ended up still having a paint issue if any onld paint was left behind.
Can't wait to see what's next!!!!! Keep pushing.
Iron man suit!
Send it!!!!!!!
❤❤❤ loved how you made that helmet looks like it was from the set of the show wow my favorite episode was when tommy turned into the white ranger
Thank you so much for the kind words 🤘🏼🤍
Love the clean look. Came out great my man! Morphenomenal!
Thanks! Pretty happy with the end result
THANK YOU!! Because of you I finish mmpr and zeo now I'm working on turbo
So happy to help that's awesome
Just in time for the 30th Anniversary!!! GREAT JOB MY DUDE!
Thank you brotha, and yes right on time
Sooo good!
Thank you! 💛
Thank you for pointing that out. There aren't any pinstriping like people think
yes, I agree the original Japanese Sentai helmets looks so much better.
🤘🏼 there we go 💛
Your videos are amazing! Great work!
Thanks so much not sure how i missed this comment!
clean set up for sure !! amazing work bro !!
Thank you brotha
Thanks for putting up the video. Recently printed one (Nikko’s file) and looking forward to working on it. Another great vid!
Super happy to help! Feel free to ask any questions along the way
Great work man
Thanks you 🙏
Awesome video. Thanks bro!
Thanks for taking the time to comment!
Ready
here super early! thanks for the support!
Dude you are a true hero posting this info on getting these done properly...perhaps you could assist with a zeo ranger 5 visor. Seems to be kinda hard
Always happy to help, feel free to join the discord or Instagram to shoot some pics over and could give you ideas on how to do the visor 🤘🏼
Always like looking at a clone of my office it's nuts lol
Amazing
Thank you! 💛💛
Very nice! I like both looks but I favor the original with no lines aswell. Iron man is going to be crazy cool.
Started sanding it today 👍🏻
Great video brother.
If you ever need something just hit me up.
I just finished the Mark 7 and now working on the Mark 6 suit.
DEFINITELY! You're the best 🤘🏼
@@Budwin7 SOOO happy to drive traffic your way
I love the clean simple look, Panel lines to me just makes the helmet weaker. I built a full Halo suit with the original Master Chief helmet(just so I can wear it while riding my motorcycle) and left off the panel lines. FYI the entire suit is actually DOT approved and the helmet has a built in video recording system with full 360 degree recording capability
Lol I'm glad you through in the DOT part cause definitely didn't want people riding around in pla helmets
@@SaturdayMorningProps yea I had to make the entire suit out of carbon fiber. 6 months of testing just to get it approved by the DOT.
@@thomaswakefield6889 that's wicked
Amazing job! Thanks for all the tips! I had that mess up with my green ranger but it worked out in the end! I’m excited to see the armor build cause that’s what I want to do next 😅
Sanding as we speak 🤘🏼
Just got my first 3d printer and looking to make some helmets.
Where did you get the 3D files from?
You should always paint metallics over pink or yellow, it gives you a better look than black.
I've never heard that! Thanks for sharing a tip with the community
Did you use hinges for the top of the helmet to be able to open & close?
With this production quality I was like “ definitely 1 mio + subs “ then I took a look at your sub count and your channel is wildly underrated keep up the great work is there also a Deadpool mask video planned ?
That's a HUGE compliment! Yes there is definitely a Deadpool tutorial coming. Currently working hard on an iron man and a blue beetleborg in between 🤘🏼
@@SaturdayMorningProps alright sweet glad I activated the notification bell 🤟🏼can’t wait for your other projects 🔥
@@VicParkerOfficial you're the best!
What would you recommend for a quick visor for an spd red helmet? I have to make last minute adjustments to my helmet before a con this weekend, any advice would be extremely appreciated my ranger friend.
Type in face shields on Amazon because there are definitely some that are pretty large, you could try to find a big thin clear plastic storage bin but that is quite a huge visor 🤣 I don't envy that task
What 3D printer were you using to make the helmet?
I may need to try that 1k Clear Coat. I've been using that rustoleum silver on a few projects, but when I've put a clear over top of it, it loses all of it's luster and turns to a dull grey color.
the duplicolor 1k keeps it looking great for sure
Not sure if you're familiar with it. But what would you recommend for the eye visors for a Kamen Rider Geats helmet?
Often I feel like people usually print them and drill a punch of holes, have you ever looked up diy vacuum forming? Could print the eyes then vacuum form them
Have you ever had issues with the krylon paint before? Is it something that should be avoided or was it a bad reaction with the primer?
Hard to tell, kapturerealms on insta is doing a yellow Mando and said he had the same issue with sunbeam yellow
What 3D printer do you have to build these helmets?
Who did you say had the nice helmet files that you WOULD recommend? It was hard to understand the name in the video. I tried searching a bit. But I didn't find anything close to what I thought you said. Thanks in advance.
honestly i cant recommend them the files look to be stolen. Nikko has all the rangers, if you buy a quarterly membership with code Quest youll get the membership for 40 and get all his helmets or do3d just red did theirs if you used q4n20 you get 20% off
@@SaturdayMorningProps Thanks I will give them another search. All the best!
How much does it cost you to build a helmet start to finish?
Depends on the helmet really, if you have your own 3d printer it's not too bad also depends on what plastic you buy, this yellow ranger took almost a whole roll to print.
Sorry to bother you I just want to say that helmet looks awesome and also what type of spray booth it is that? It looks like a tanning booth.
Thanks you so much! It's a 5ft by 5ft grow tent from Amazon
Oooohhh
Thank you
@@otakugamer4387 of course here to help!
Hey! Do you sell it? If so, how can I buy it?
hey there do you know what kind of buckles i need for my ranger helmet?
@@wrenchgaming3703 I have a tutorial on my channel with them linked or you can got to my linktree and they are in my Amazon list for commonly used items
What was your process to sand it back to the start?
Go all the way back to 80, needed the harder grit to take off the cured paint
Do you put Guides in the Front and Back of the helmet so when you close it, it lines up perfectly? Or just The Latches outside and elastics inside?
I dont ever add any, some modelers have tabs on them some dont.
Okay cool, I have a Dino Fury Helmet Printing right now and it doesn't have any. Good to know I don't need any :)
@@GeekEasy207 you should be fine with just elastic and buckles
What printer do you use
The cr10 printers by creality
Im hére 🎉🎉🎉
How much to have you make one for me?
Currently way too busy with the iron man suit to do finished commissions, kits are $115 shipped U.S
looking for the yellow helmet so i can stream Live
Love 🐅🐅🐅🫶❣️❤️❤️
Thank you!
You need to update your channel banner now.
on it!
can i buy this yellow ranger helmet from you/?
unfortunately this helmet was a giveaway for 5k subscribers, if you message me on instagram we can talk about kits
Where can I get the files?
As I mentioned in the video this file isn't sold anywhere, if you want the do3d files you can get 20% off with code Q4N20 or you can get 20 dollars of a Nikko 3 month membership with code QUEST
The mold of this helm is off ... No offense to you or this work whoever you buy your files from isn't it..
Edit after watching the video you already explained why it looks off LMAO!!
Yeah if you watch my other videos I actually talk quite a lot about how I don't really enjoy do3d files the set of files was bought as a gift for me so I worked with what I had 🤣🤘🏼