How To Remove S550 Mustang Rear Bumper
ฝัง
- เผยแพร่เมื่อ 21 ต.ค. 2020
- As with all MustangsByMatt videos, my goal is to show the viewer that you don't need a million dollar shop and a massive cache of tools to work on your car.
In this video, Matt show's how to remove the rear bumper on the 2018 - 2020 S550 Mustang. It's not difficult but is time consuming. A clean work area is a must. - ยานยนต์และพาหนะ
Best video on youtube, excellent detail and quality.
Brings back memories of my 88 5.0, tear down and re-assembly, after my Brother painted it. As usual, good video!
Thank you my friend, was a big help.🍺
Thanks bro' great video. I have a 2019 Ecoboost that I need to remove the rear bumper cover from in order to have it repaired and re'painted. Removing it myself is gna save me about $1,000 according to my autobody tech.
Hey man thanks for posting this I appreciate you!
Great video, showed all steps thank you. Was looking for a video exactly like this when I remove mine
I was honestly shocked there wasn't already something out there about removing the bumper. I'm always looking for suggestions, so if you have any they are welcome.
Great video. That the MMD rear diffuser? Looks like it. I’m getting ready to install mine. I was looking for the instal video you said was coming. 🤷🏻♂️
Did you get the new bolt on version vs the 3M tape version? I got the bolt on. Thanks for this vid. It’s very helpful. 👌🏼
Helpful video, I needed access to the bash bar. I also noticed we in the UK don't have an emergency trunk release on the inside of the lid.
I’m glad you found it helpful. As tough as the Euro NCAP standards are, that’s strange to not have the release. Are you sure it isn’t tucked away behind the panel?
As ever you make it look easy Matt .... so there's a pretty big gap now around those 'single' tailpipes on each side :)
Better get some GT mufflers to fill em in. 😉
Thanks for the video and info. My rear bumper seem to have gaps so trying figure how to tighten it up a bit
Loosen the hardware around the taillights and around the left and right wheel wells. Tighten from the center out in equal steps. That *should help with the gaps.
@@MustangsbyMatt after watching yohr video I didn't notice the screws under the rear tails and seeing the others. I'll be checking it out this weekend
Hello, what part needs to be modified on the bumper supports? I have a 2017 mustang phase 1 and I am installing a rear bumper from mustang phase 2 2018-2022. on my 2017 mustang I don't have the fixing screws under the rear lights. Doesn't it matter for the assembly of the 2018 bumper that there are no retaining screws?
Mine on my 17 fell off i poped it back on but i do need to fix it
Nice video! I want to put the premium bumper cover on my 17 gt now!
It really does look better. There might be some small differences but overall it should be the same thing.
The license plate harness I only have the Left side one I can’t find the right wire harness help me plis!
Thanks for the video bro. Upgrading my 2016 base bumper to a 2018+
Let me know how it turns out.
@@MustangsbyMatt only difference is the 2018+ has two extra screws below taillights and the bracket underneath has to be changed to fit. All in all straight forward, video helped a tons. Thanks.
I was looking into doing a 2018+ conversion on my 2017 Mustang Gt. What bracket was needed and what screws were needed?
@@armandperez1787 you don’t need anything honestly. It’ll secure right in.
Ok Thanks Boss, I plan on doing it in about a week or so. Thank You 👍🏽
I've been looking and around and having trouble finding that rear valance with space for the quad tips?
It’s a factory GT part.
Bumper delete style
Are you recording with the laundry banging ? Lol
Clothes gotta get washed. Videos gotta get made.