How to Design a PCB easily with EasyEDA & JLCPCB - Complete Tutorial

JLCPCB Prototype for $2(Any Color): jlcpcb.com
Free Online PCB Making Software: easyeda.com/
Good News!
Now you can order me to design a custom PCB for you!
www.fiverr.com/users/easyhome...
Like Us On Facebook:
goo.gl/rUxA5C
SUBSCRIBE HERE:
goo.gl/2Epk4x

[@ashokbulbule680]

I am in search of PCB designing since long time.
Thanks!

[@YigalBZ]

Thank you for the good video. Please consider adding a video that explains how to select the mechanical sizes: of holes, capacitors, screw holes, and nets width, etc.

[@tanmoysarkar5848]

Finally an easy-to-understand and well-explained tutorial.Hats off to you!

[@MrThomBeck]

Great tutorial. Cheers from the USA.

[@beck3740]

Bro..thank you so much. You are really helpful. Cheers from Indonesia.

[@sanjitfranklin]

Thanks a lot for this clear tutorial. That website truly is amazing.

[@shakilahmed6870]

I was waiting for a detailed tutorial.Thanks sir

[@yousifalqallaf8095]

Before this video i was having many doubts, but after watching the video EVERYTHING cleared. Thanks so much SIR

[@boris5448]

One of the more useful jlcpcb tutorials thank you

[@jjoosshhb2193]

its cus hes indian

[@Arpit.Jacob_805]

Clearly explaind before this video i was having many doubts but after watching the video my all doubts cleared. Thanks so much

[@humbertini900]

this is an amazing insight into the build, i just subscribed i also have built a 50 watts, 75 watts panel and 2 wind turbines on my channel successfully

[@Delali]

I have the same video on my channel and i must say i love your delivery.

[@hiimanengineer9668]

Thank you! Your video was very informational and easy to understand.

[@paveltaufer1813]

Je to výborný seriál, zvláště pro začínají pracovníky

[@euphoriachemistryclasses1383]

Thanks for this video. please Make another video on how to place smd on both side of PCB.

[@tinker7722]

Thank you so much for that great tutorial

[@anilarkay]

Very useful.
Thanks a lot
Easy HomeMade Projects
!!

[@sachinbedekar8553]

मेरे दोस्त यह विडीओ हिंदी मे बना बहुत लोग देखेंगे और बहुत को फायदा भी होगा
जो इंग्लिश आछी तरह जानते है वहु एक तो खुद सिख लेते है या फिर विदेशी विडीओ हि देखते है
आपका नॉलेज excellent है पर हिंदी मे समजाव

[@anokhautomation4453]

Very very useful tutorial 👍 thanks for sharing.
Is it possible we can simulate circuit in easyeda software? Please reply me 🙏

[@vishnujayakumar1229]

Drawing of copper area for both layer is mandatory,for Fabrication??

[@republicoftutorials6068]

Such a great explanation thank you

[@1.21gw5]

Very cearly explained and thank you
keep up the good work.
May i know how much did they charge for the shipping of the boards

[@JORGE965100]

Hi, can you do a tutorial on how you did the bottle filling machine project, please.

[@jayarajk1118]

Awsome bro nice circuit design and software. I like it

[@AliRaza-un1ul]

Thanks bro for telling an easy way to prototype pcb😍😍😍

[@claudiocosta9296]

Many thanks ! Great vídeo !

[@shubhamgautam1734]

Can we able to draw a circuit diagram through observing the already made pcb??

[@chinmaykulkarni7835]

Really good video thanks for making it

[@aamiaudios2125]

Your projects are awsome..
But pls make single layer pcb layouts. Pcb making with copper clad is not possible in two layer pcb layouts,
Or please make a video about how to convert two layer pcb layout garber file to single layer using easy Eda software

[@VE3DAL]

Excellent!!! thank you.

[@chandrum599]

Very useful tutorial.. Good Explaination thanks for your vedio.. 👌👌

[@debabrataghosh7782]

Too GOOD and very much helpful

[@phinpheen5771]

Thanks for sharing your knowledge.

[@electronicseternity9210]

Excuse me for the blunt question, can I know why does EasyEDA does not automatically generate holes/pad for Vcc and GNB which can be used as power supply to the board.

[@MrJitendra007]

Actually u can go to the auto router and check (tick) only the bottom layer and run....boom, then u make ur tiny adjustments. I think auto router is the best....trust me i have done some its fantastic.

[@prashanpremaratneAU]

Great tutorial

[@anandakrdas918]

Can I use this software through mobile

[@electronic7979]

Helpful video 👍

[@m.tayyab3802]

Thanx for this video we want this video

[@vivekaher4131]

I want to use it for my4 band graphic equaliser can u guide me how to connect sliding potentiometer I didn't find it in component

[@MrJitendra007]

One more tips... in the schematics u can simply select the components and hit the spacebar to rotate really fast.....boom.

[@MyOwntuahur]

Awesome tutorial, thanks for this useful post..

[@alvin10388]

Thank you for the lesson. is it possible to convert png format circuit download from the Web?

[@MrJitendra007]

I have a question if u r using a top layer (red) then how can it be just under components how u gonna solder it?? for our small diy projects we have one side copper layer which is the bottom layer(blue), actually we are looking down from top to bottom and the layers help u to control. I dont think the top layer u r drawing make sense here what i mean is we cannot lift the component and solder underneath , looking from top.

[@aliksandarfordino5012]

Thx so much really helpful

[@naderhumood1199]

Great vedio Sir.......v informative..thanks v much.

[@UnimaxTechnology]

Thanks For Everything

[@zarkmuckerberg8341]

Great video, but I do not understand what you are doing at 13:05. Can you please explain?

[@sumbalzahraameen]

Thank you doen sharing and like🤩

[@adrianclark9581]

Fantastic explanation thankyou

[@lambertax]

How this app allow us to have components on both sides (especially SMD components) thanks

[@bobpaydar3210]

thanks very good tutorial

[@Bianchi77]

Nice info, well done, thanks for sharing it :)

[@mohsenr4434]

Thank you!

[@testchannel1834]

Great Video , Thank you 3 years later in July 2023

[@soundpark_]

Thanks!

[@Shubham-po2tp]

Please tell me another method of doing things
I changed pads of components, but after some time I found some corrections
I make them and
Import changes to pcb layout after this
All pad changed as they were very first pcb conversation
I stucked
If I change pads then I can't import changes,
If import changes then everytime I have to change all pads

[@Taher595]

Thank you dear friend I am Arabic follower on TH-cam

[@KheeRaiElectronics]

Thank you sir!

[@adamarzo559]

Can you eliminate a lot of the ground tracks via a ground plane?

[@gopakumarnair688]

Very good explanation

[@SashkoMelnyk]

Thank you very much 🙏

[@tothetech2003]

thank you for this video and i subscribed your channel..

[@drdronist]

i cant use bottom layer in eda. when i choose bottom layer and start to wiring, after touching pad automatically bottom layer selection is changed into top layer. any ideas for me?

[@lightnashadow7197]

what are the components to create a circuit for WIFI? or internet interface.

[@unexploredtour769]

Thank you so much

[@rohitkumar-jv9ym]

Bhai agr mota diode lgana ho to holes size kaise bdega

[@sivakumar.j7382]

Great thank you brother

[@jayarajk1118]

Bro please make audio amplifier

[@ErCanEverything]

`Thank you very much my Friend

[@AbdolazimHasseli]

Good job.

[@pllagunos]

Very nice tutorial. Is there a way to properly align components in the PCB design. Like, I know it doesn't affect performance, but for example those resistors are a bit misaligned

[@mandeep5993]

Yes, it can be done. Select the components (by pressing and holding the Ctrl key) and, go to the top menu -> Format, and select the desired alignment.

[@harishmacharla1863]

How do you do that routing

[@Harlequin43]

What does "unfinished net" mean?

[@Nimai_HiFi]

Thank you

[@Vipul-57]

How can i check my schematic is free from error.. And is ready to convert in pcb

[@Greenitcom]

thank you is very good

[@TheUnofficialMaker]

I have a box I purchased which has a 12 pb keypad, I want to take out the original pcb and create my own, repurposing the small enclosure. Is there a way to place pads on the board by using x y measurements so I can place the pushbuttons in the same location as the original board?

[@EasyHomeMadeProjects]

You can ask their support team.

[@TheUnofficialMaker]

@@EasyHomeMadeProjects good answer, I will give them an email.

[@amnlabz]

Nice information

[@amarnath7589]

How to take dc 15 voltage

[@salinrajkunnummal8018]

excellent...….

[@anillone5396]

sir, how can i get components pad layout print?

[@hendriagustian7082]

Hopefully the factory in China can handle files in pdf format

[@SreekanthKommula]

Hi
How to Add Interactive Html Bom to easyeda

[@nathanrichardson5223]

Please can someone help me out I just maked a schematics on easyeda but when I try to convert it to a pcb it dose nothing I have saved the schematic but it still won’t convert it to a pcb if someone no’s why or can you help please can you or can I email you with a pic to show what it’s doing

[@YuvaTamilTech]

how about shipping cost to India

[@balajik6606]

one video make how to use simulation.

[@sunilgupta-nx2mx]

Powder filling machine please

[@amiralilehri2642]

Camical ko kis chiz me dale

[@jayeshpatel-nb9cr]

Hello how much do you charge to make a gerber file for me ? I need to Oder some PCB thank you !

[@sudhiracharya1234]

How to design single layer pcb? how to apply setting in easyeda tool?

[@mohidkhan4637]

Sir please tell me how we find the circuit diagram

[@mayibongwedube2790]

Excellent...you cleared many doubts...

[@ranjikaarsakularathna7601]

WHAT IS THE OPTION TO CONVERT JLC PCB

[@vijaygajjar9482]

How to get this software?

[@SAI_LINGESH]

Brother can you please explain, if i want to take print out of the circuit which i made in easyeda, for pcb etching process. Which option should i need to select in easyeda software? So that I can take print out?

[@EasyHomeMadeProjects]

Watch complete video

[@SAI_LINGESH]

@@EasyHomeMadeProjects thanks i got the solution

[@-vava]

Sir mere liye pcb design ker sakte hai

[@Shubham-po2tp]

Please tell is it possible to change circuit connection in schematic diagram after 90% complition of PCB layout
I connected wrong connection in schematic
and found it after 90% of completion of PCB tracks layout
Please tell me easy way so my PCB layout struggle not go waste
Or I have to make whole PCB layout from scratch by stating by placing comments

[@EasyHomeMadeProjects]

Simply make changes in circuit diagram and then click on "update pcb" option under pcb design option menu.

[@electronicsuniversevvv9635]

How to download pdf home etching pcb

[@a.vkingsrajurkar2750]

but 2 line are connecting