Making Professional PCB at Home
ฝัง
- เผยแพร่เมื่อ 18 มี.ค. 2021
- In this video I tried to make a Professional Quality PCB at Home.
🔅Order your first PCB and get a $5 coupon - www.pcbway.com/
🔴 Get Altium free trial - www.altium.com/yt/ddelectrotech
❤️Subscribe My New Channel - th-cam.com/channels/.html
C_mi5ZthQaKdkXQm2bnyRDA
❤️Support us on Patreon -
/ ddelectrotech
Similar Videos -
Made My Own Tablet Computer - • How I Made My Own Tabl...
Made My Own Smart watch - • How I Made my own Smar...
Made My Own Smart Glass - • How I Made my own Smar...
------- Follow us on FaceBook ------- / ddelectrotech
------ Follow us on Twitter ------ / ddelectrotech
#PCb#HowToMakePCBatHome#DIYPCB#GlitterbombTrapCatchesPhoneScammer#Glitterbomb - แนวปฏิบัติและการใช้ชีวิต
I have to say ... this is VERY impressive! Sure it didn't turn out professional quality, but you still managed to etch a PCB using laser print quality and LIGHT as opposed to the toner transfer method which is just awful in my opinion. Very nice job and excellent video!
I only build my own boards to test a prototype for low cost. I know I'm going to upgrade the board, so it's not worth having it made until I work out the bugs. But I just "tin" my boards, but I'm aware of the risk of short circuits. I think this silkscreening method is PERFECT for prototypes!
Thank you for this video!
For solder mask, a UV cure solder mask is simpler and faster.
Screen print is for mass production. But if you need in quantity, just send out to
the PCB factory.
Hi
The issue is your exposure/shadow mask isn't opaque enough. Print it twice and stack them. This will make it impervious to light. I'd also use acetate and not paper+oil. Oil will lift the mask off the surface and you'll get light creep around the edges of a shadow mask.
can't you just print this on clear plastic?
At least he remembered that he has a youtube channel 😁😁
STFU he is a hardworking guy
True
Spammer!
Now a days he is remembering
Why does he forget it so much?
That’s pretty good! Thanks for sharing your process. Especially the solder mask and silk screen.
Your aim is 10million subscribers now.... Upload a bit more regularly... I literally wait for u dada
Ekdom thik bro..
hmm
Hmmm
I think your a bit high
@@mrduckical bruh look at T Series India there subscribers
Salute to this guy's patience.
I would've quit first time it didn't work. Respect
Brother this is amazing. So proud to see one of our own doing this kind of work and educating at the same time.
Thank you sir this is quite informative I'm 64 years of age a theoretical scientist and now I am on my next venture thank you so much this is quite informative.:-)
Thank you for putting up such an honest video out there. It is an expert show with all the usual shortcomings that usually happen in the workshop. Make it more real and valuable.
Funfact :- After long time he knows that he has a youtube channel 😂
No replies?! Lemme fix that
He knows everything better then you will ever know😂😂😂😂😂
?
He has lot sub than you😂😂
@@faizanalam2986ok
Few tips: clean the PCB before use (after cut). Just soap is sufficient. If you want to faster the process, just use ~50°C watter for the acid. And sharpen pen is also good for repairs of broken traces.
can we just appreciate him for his kind of hardwork
keep good work up!!
He again finally realised that he has a channel..🙏
Great video. Love how you kept attempting to get it the best outcome and showing the issues that will arise. Surely learnt a lot.
So much hardwork and dedication!!
Hats off brother!!
Your right. But pcb manufacturers that has all the top machines and can turn out hundreds an hour for such a small cost like $2 this is truly a waste of time
The one and only Successful Engineer TH-camr 😳👍🏻
Mark Rober??? Linus Tech Tips? Etc.?
Hacksmith: Am I a joke to you?
Don't forget ElectroBOOM
let's say the Indian engineer channel, so far I have not found another Indian channel like this
@@syedrayyan190 TECH BOY TOYS??? THE WRENCH???
dude the amount of work you are doing is hectic kudos to you
It's definitely worth it in the long run IF you are using the toner transfer method and tinning traces. Cost per project is ~2$ for single and double layer boards, and you have it ready in
Very nicely made!
This is truly inspiring!
And.. totally felt like worth my time watching
After a long time, I watched a quality video. Thanks, DD ElectroTEch You are appriciated.
Learn from mistakes. He is one perfect example!👏
Hello bro
I was browsing through TH-cam and a saw your videos . I'm a ECE graduate know many things but experimented very less your way of doing new R&D impressed me and motivated me to start thinking like this apart from my job I'm very excited ❤️.
Thanks bro
Awesome, informative and entertaining video. :D
Could you make a detailed video about the screen printing? I'm looking for something I can use for aluminium case marking.
Do they both work? Its cool to see you make the pcb that way and kept trying until you got better results. I have been using a milling machine to mill out the traces on FR1 boards. Personally I think if you want to iterate on your design quicker, its a good to know how to make pcbs at home and so you can test out your design more conveniently. Of course there are tradeoffs between cost, complexity and time to consider
I like the fact that he never gives up
The amount of patience you have is realy commendable brother .. Good job
Much respect to you sir for even wanting to attempt to do such a thing
He's back again damn I needed my favorite youtuber to upload a video 😊
Bro u have great talent and craz to do the things ...
Your way of understanding and doing the things are very professional 👌
Best of luck and keep going...
Thank you bro learnt a lot of new things form your video i have worked in a lot of electronics projects as well . You have managed to impress me by your hardwork and efforts
Bro we all love u. U r the best tech youtuber ever. Pls never leave the utube.
Great Video again man. Just love the channel😍
Great effort! I'm with you in that I'd get it professionally made if it's that easy to obtain quickly
You made that look pretty easy! I can barely solder/de solder pcbs. I'm still learning about all the devices that are used. Capacitors, resistors, inductors, transformers, diodes, bridge rectifiers and don't even get me started on Ics! Which are basically super small circuits completely integrated onto a microchip. I've been reading up on transistors,thyristors,mosfet,jfet ECT. Electrical engineering is fascinating but at the same time extremely Humbling! I'm an electrician and it's still rather difficult to understand everything. Great video.
He is real hardworking man
Salute for you 😁
Literally waiting for u sir!
Legend is back 👍
Great video mate, amazing to know the process and capability to do this at home !!
Hats off to your patience and dedication
Awesome 👍😊👌 bro keep it up and love from BANGLADESH 🇧🇩🇧🇩🇧🇩🇧🇩
You Learn Something Now Everyday. 🧠😄
That is a work of art. Thanks for sharing!
Man , you never give up. That D Scientist In You ! Hats Off ! World needs more Geniuses like U Bro !
Electronic legend is back 🔥🔥⚡⚡
This video has explained us that everything on the world we need requires some sort of unrelated science branch (like using Chemistry here)
Thanks for demonstrating the pcb making procedure ( latest) . tks sir.
I wish you all the very best... This is a very important lesson.
The person who give you best memories becomes a memory
finally. welcome back
This is amazing, Congrats!
Thank you so much sir for your talent... It is so enjoyable to watch your content. I am from the Philippines.
Good video. But I don't think your mesh count is fine enough. For those fine details required for a PCB, you'd want a mesh count closer to 300. Also, you can print the mask for the traces with the screen as well; no need for that photosensitive stuff.
Hey brilliant vid, really great, learnt a lot, can't wait to build one. You were a bit harsh in the comparison. Look forward to seeing one you make reeeeallly carefully...
Don't waste your time. At this point, making aboard is more an exercise in just doing it, not anything practical. Get the Chinese to do your boards. They do a GREAT job and charge far less than your time is worth. Trust me, I've done up boards for DECADES and can't stand the idea of doing up another one. There are far better ways to spend your time than doing that.
@@willmorrison1022 :(
I guess the person who asked this question they just go off order direct from PCBWay instead after watching this video process.... lolz
but i have to say that this guy is a legend to built a PCB manually with everything at home
This is very educational for people who are really curious how PCB are made
thanks for this video, you convinced me to just go with the pcb manufacturer XD
You know what a coincidence means
I've been strolling through you channel now
Started watching a video about the same time you made this video public
Looked the videos of your channel it wasn't updated
But got the notification
And i became the 1st to view this video
First comment love you sir from Himachal Pradesh. India
thank you for bring me to remember history with this video...
for learning purpose this is the best way you know every component at your project, about how it work and how it made.
but for project, please don't ever.. ever.. ever.. waste your time and keep productive.
i have done with that at school (just like a nightmare and i have lost a couple think: time and money), better to save your time and let professional do their job.
Stay health, GBU. :)
I thought that was a really great PCB. All the at-home methods including some of the $4,000 conductive ink PCB mill/printers produce something along the same quality. Great for testing a design before manufacture I guess. Nice video, good work.
you forgot to mention the shipping charges as usual just like any other youtuber. No one mentions the actual cost of getting the pcbs ,I suppose because they sponsor the video. Anyways was worth giving a shot type video, nice one.
Because every country has different shipping costs
@@Dragon-xd9em doesn't matter, you cannot list all as a creator unless you dig for all the info practically the norms change every now and then as per government intimations but here you are sharing your experience not the world's that is what is missing , not just in this video but almost all creators. Very few are left who share all data for complete transparency which is nowadays taken for granted while making videos. This results in more clutter on youtube as well as if practiced will reduce the same(clutter) and bring you content of a better quality. I do respect these creators but then feel sorry for others whose video production quality is nice but sponsored content is not handled well especially when you are looking for long term relationship with your viewers. Hope that solves all/any immediate queries about the context of my original comment. Objective was to compliment content while being honest about missing parts. But then who cares, 😂 in this whole youtube I am just another viewer writing stories in comments who nobody might pay attention to. Nevermind. Have a good day ahead! 👍
Sir plz Upload video Every Day..
Excellent video. Legendary effort. Thanks for the video👍
You make lot of efforts for a single video 👏👏👏
বাংলা চ্যানেল এর কথা ভুলে গেলেন নাকি?
বাংলায় আরও নতুন ভিডিও চাই।
Love from Bangladesh.
Yes! Excatly.. he is not uploading there because that channel did not reach 50K subs
Again, let's go for 3 months 😏
I wonder what he is making
3 months passed
Lazier than before
Hats off to your hardwork for such an informative video!!
With a small CNC you can skip all the manual steps except applying the mask resin (and that too becomes easier as you've just to apply an even layer, a second pass in the cnc will remove the excess resin above the pads).
Hello Sir, Vivek here I have also interest in technology and I am doing JEE preparing for computer Science. But sir I have to become like you, so sir which think I have to do? please sir can you tell me 🙏
He finally has his password back!!
Lol
Only some understood your comment
Lol
@@vsreddy4520 i subbed to u
@@vsreddy4520 umm
Hello vasu reddy
As u know golmaal mai
In the comment I meant that he had forgotten about his password of his Google account
And now he uploaded cuz he remembered his password
informative and honest with no bs..
He is the person who's English I can understand best.😎😀🔥👍
Made programming videos also if you know
Legends watching In 2023
Love the way he talks!!
I'm amazed seeing your patient...
Are you iitian?
I think
a suggestion, you can use a 50/50 mix of Vinegar and Hydrogen Peroxide with a small amount of salt to etch boards. It stays clear, works just as good as Ferric Chloride, and makes it far easier to monitor the board during the etching process.
You guys are doing great work
..
Excellent video. Thanks a lot. I learned a lot.
Nice. And appreciate at your effort of keep trying many times till It gets corrected. All the best for your ElectroFutureNics.👌👌👌
Please turn an cheap bm 800 mic circuit board to sound like professional
Love to see that you are doing this things ❤️❤️
Excellent. Much respect 👏🏾👏🏾
Excellent execution...And u have great Patience 👌👌
I really appreciate all your efforts... Nice video
Damn bro! That's lot of work. Thanks for making it.
thank you for putting this on youtube!!
Informative. Useful. Calming. Inspiring. Life-changing. Enjoyable. Heart-warming. Other.
Awesome da, though you give a long gap for each video but your videos are perfect !!!!!!!!😍😍😍👍👍👍
Your very hardworking guy God bless you
BRAVO. Thank you for sharing !
Your hardwork came to light.
you're the great person for nice and patience video making until the end 😊 edit= love from nepal ☺
itna information wala content youtube par hai hats off man
Persistent pays off......good job
this man is legend
Now that I see how soldermask is made, I have an idea on how to improve this idea: He's applying the silkscreen directly to the PCB. That's why the the open areas between traces have more ink than the places with lots of copper. This tells me that's the "spacing" that's the issue. The only way around this that I can see is to make a "reverse image" of the soldermask, apply it to a film and transfer it to the PCB. This way you can make smooth soldermask.
But once I work out the design, I'm buying from PCB Way! They're very cost-effective. The only drawback is the "shipping time". Even when we paid for the expedited building, it still takes a long time to get here from China.
Have you tried JLCPCB? Takes about a week once they manufacture. Shipping from ANYONE is a bit iffy, right now, but they have sent me 4 or 5 sets of boards that I was surprised came in so quickly. Killer quality and prices, too. Granted, they are the only folks I've had do up any boards for me, but I've been impressed every time. I HATE doing up boards, anymore. I'm in my 60's, and back in my early days, we had to make our own every time. I'm so sick of taking the time, I will send off for them every time, now.
awesome, love your content! make more1!!!!
Wow sir great work and knowledge👍
When The World Needed Him The Most He Appeared!!!!