I was debating on hanging my generator the same way you did. I opted for getting a 900 lb rated hitch installed instead and made a custom hitch-mounted generator carrier for my Yamaha 4500. I like the box idea for sure, mine is a tray style with a fitted tarp cover.
Great job! Really like this mod. I'd like to see a small door in the front of the box that allows the propane adapter to be connected to a tank sitting outside the box but still remain locked. Also a mount from the trailer hitch instead of the bumper.
I was just thinking about doing something similar to this and wanted to find something on TH-cam lol, well here we go! Nice work man 👊🏼 I’m totally taking this idea. Thanks for sharing!
This is great thanks! Was thinking of doing the same thing on my trailer but people say it affects the handling when you have weight on the rear, going to look at the stromberg tray
Great idea.... I'm curious how well the mounts and the bumper will hold up? Even though it's under 4 feet overhang you should still add some reflectors or reflectorized tape. just sayin.
Love the box. Can you share the basic building plans for it? I think I can make also by repurposing a swamp cooler unit? I like the opening makes the whole thing so clean and functional.
If you built and sold something like this, I would consider buying it. I'm not much of a welder myself. Even if you were just to sell the plans, I'd pay one of my friends to weld it.
Good job... I just came to look because your video showed up on my predator install video analytics saying it was being recommended to people watching your video.
nice job. I need to find out how much weight My Rv can carry back there before going ahead. In the past at hunt camp we always just made a box with 2 inch blue insulation and left the exhaust side open and that worked well. Was wondering if you considered insulating that box with a 1 inch foam inside.
Looks like you did a great job! The only worry I have is adding that much weight to the rear of my trailer, and attempting to keep 10 - 15% trailer weight on my tongue. I have a 3000 watt inverter generator, so it's small and quiet but still weighs @ 100 lbs.
@@pierreverdoni it will remove tongue weight however. For the 100 lbs you put at the very back of your trailer, the tongue weight diminishes by approximately the same. If your tongue weight becomes too light your trailer will begin to sway and can begin to have the tail wag the dog so to speak...
That reminded me of securing my 9 inch crt tv down in my sleeper when I was driving truck. There was a tv compartment in the sleeper and a strap similar to yours to secure the tv. Never the less I was going through Louisiana one time that was quite a bumpy experience on I 10. Somehow the tv got loose and crashed to the floor. Thankfully it still worked but when I got home I went to Academy and bought an orange kick ball which was about the size of a soccer ball and I also bought a hand held pump with one of those needles for inflating the kick ball. Next time I went out in the truck I deflated the kickball enough so it would sit on top of the tv and then inflated it enough to fit against the top of the enclosure which helped hold the tv snugly within the tv enclosure. I f you any problems with your generator getting loose I would consider getting a couple of solid rubber bungee cords in addition to that strap to help secure it and keep constant tension to hold it down. Just a suggestion for what its worth.
Hello, I see it's been almost 3 years now, so how well are your mounts holding up? I am pondering on how to mount my generator on my travel trailer. Thanks.
How did you assemble the box and where did you get the materials? Looking to make something similar so we can have the generator running and not worry about it getting stolen.
how big are the louvered vents like couldn't a scumbag just pry off the vent tin snip the hole a tad larger an run off w/ the genny? I'm planning a front mounted steel gen box w/ side vents but I need to pull start my yammie. good tip on the cord, but the scumbag will proballey cut it an run off w/ it.
Thank you sir , I have been searching for a video to teach me this. I want to run a generator while my Rv is moving to power the roof mounted A/C. Where did you buy the box! Thanks a million just subscribed.
Bob Earl there has been no bend or sag in the bumper. Since this setup doesn’t bounce or move like a bike rack would, it hasn’t caused any damage while towing down the road.
Ok... very nice... but what about the box itself? where did you get that from? You have a link for everything else but the box which is the main item....
Wayne Hurley I have never ran it at a campsite but I’ve been inside the camper while it has been running and never noticed any vibration, but I never really was at the rear of trailer while running. I typically run the generator while traveling down the road for my dogs.
Great job! I just purchased a 3500 watt inverter generator for my travel trailer. I have a 300 lb capacity hitch receiver. I think your design could be adapted.
I’m in florida what place can I go to so they can create this for me? I am a woman so I have no clue how to do this! Any suggestions as to where I would go to have this done for me?
Todd how can I get the schematics on this box? I'd live to build this. That's my exact generator too so I know it will work. Awesome build and thanks for sharing!!👍🏻
I really don't have any official schematics on it. It was just sketched out on paper. However, the dimensions are 27" wide x 25" deep x 22" tall. The lid is made 1/2" bigger. I used 16" x 16" HVAC vents for the sides.
Help me understand why you are running the generator while driving down the road? I’m a full timer with a 2018 Bighorn 5th wheel. I have a 5500 Onan Cummins LP and don’t need to run it while towing. Curious?
We have used the th-cam.com/users/postUgkxOTeIs0vv4_9B5hsmnLsk9r930uDQLu_Y for probably 30 hours with our camper and it’s been great! The noise level is really only noticeable when running the AC and other appliances like the microwave, hair dryer, or coffee pot. It’s not huge like other ones and it has wheels so even at 90lbs, I can move it!
Ronald Phillips it is an electric start. I only have to use the pull cord if the battery fails, which has never happened yet. The battery is located inside the generator itself by one of the side panels.
@@todd9241982 Todd, I really really like your box and video. Thanks. Todd, you did not include any links for where you bought the actual box. I have the exact same generator with remote control where I can turn it on / off from the 5th wheel without getting out. Looking to build something like yours but have been looking on the internet to find a similar box. It would be really great if you can post the link for the box.
Ellie Fuerst Thank you for the like! A friend of mine custom made that box for me. We both discussed the plans of what I would want & need, and he actually cut and welded it all for me. Like you, I struggled on finding a box that was affordable and available.
@@todd9241982 thanks again for the response. I am still in the planning stage. What I would like to do is to use the Champion Dual Fuel 3400 on propane ONLY. I have 2 30# propane bottle on my 5th wheel that are plenty to run a long time. Can you provide the dimensions of the box? I realize your friend built it. I have a machine shop here that is willing to do the same for $300 (materials included). I like the size of the box you have as it leaves some room. Thanks again,
Looks good now a little red and white safety reflective tape around the box and bing .....good to go also have you thought about the gas to LP conversion for your generator. I’m sub in right now
I like the reflective tape idea! I'm going to look into that. I did consider the LP conversion, but I wouldn't have had enough start up wattage that I needed. That's why I stuck with gas. Thanks for the idea.
Tree City Travelers any T/A would have the tape some Pilot Flying J may have it .I just thought of it because I’m just a trucker and I work too much 😄😄
You sir Should have started the generator so we could hear how loud it is in the box, it might need to be insulated with something to help with the noise but we wouldnt know that because you didn't start the generator
No vibration that I’m aware of. If it sat on a cargo carrier, you would naturally have some, but this is directly bolted to the arms. I’ve never had an issue with the generator running during transit. I also used a ratchet strap over top the generator to keep it from moving as well.
i would add some sort of vibration damper on the bottom of the box to help keep the vibrations modifying sound into the trailer. also the bottom of the generator too. every little bit helps.
@@todd9241982 I bought a 20 amp ac to dc transformer of eba y for 20 bucks and it runs the dual 10 inch 12 volt fans on my gen. box one blows in and one out the gen. does not rev from pluging in in so it does not use many amps.
Keith Burns very true, but Lippert Components told me that the bumper is rated to carry 200 lbs and I’ve never experienced trailer sway with this setup.
Every Generator BOX Must have an Exhaust fan To Move Hot 🔥 air out. It's a must
I was debating on hanging my generator the same way you did. I opted for getting a 900 lb rated hitch installed instead and made a custom hitch-mounted generator carrier for my Yamaha 4500. I like the box idea for sure, mine is a tray style with a fitted tarp cover.
Pretty cool man!!! I’m considering making one for front of my van. Trying to get generator farthest point from my camper and bed. Thanks for video
Great idea, just what I was looking for. thanks a bunch
Great job! Really like this mod. I'd like to see a small door in the front of the box that allows the propane adapter to be connected to a tank sitting outside the box but still remain locked. Also a mount from the trailer hitch instead of the bumper.
I was just thinking about doing something similar to this and wanted to find something on TH-cam lol, well here we go! Nice work man 👊🏼 I’m totally taking this idea. Thanks for sharing!
Great idea! Something to consider noise deadening material on inside flat panels and not sure if fan is water proof
Great info Todd!!! Thank you!!!
I was JUST thinking about this idea, wondering if it was possible... Lo and behold. Nice job man!
MaziesButt Thank you!!!
Great build
Great idea bud. Thanks for the video.
This is great thanks! Was thinking of doing the same thing on my trailer but people say it affects the handling when you have weight on the rear, going to look at the stromberg tray
Your a genius that is a nice setup
Very good job!
Great job!
Great video! I know what I will be doing in the near future! Thank you!
Great idea.... I'm curious how well the mounts and the bumper will hold up? Even though it's under 4 feet overhang you should still add some reflectors or reflectorized tape. just sayin.
Love the box. Can you share the basic building plans for it? I think I can make also by repurposing a swamp cooler unit? I like the opening makes the whole thing so clean and functional.
If you built and sold something like this, I would consider buying it. I'm not much of a welder myself.
Even if you were just to sell the plans, I'd pay one of my friends to weld it.
Tommy Etheredge send me your email where I can contact you.
@@todd9241982 tornadotom4201@aol.com works. Thanks!
Good sir, you are a genious!
That is a good looking job. I will be doing something like this in the near future form my generator.
Good job... I just came to look because your video showed up on my predator install video analytics saying it was being recommended to people watching your video.
We also have a FB group for TH-cam camping/adventure channels if you are interested
facebook.com/groups/1098080200390857/?ref=share
Thank you and thanks for sharing your FB group. I’m going to look it up today!
nice job. I need to find out how much weight My Rv can carry back there before going ahead. In the past at hunt camp we always just made a box with 2 inch blue insulation and left the exhaust side open and that worked well. Was wondering if you considered insulating that box with a 1 inch foam inside.
Line the inside with rock wool. It’s a fireproof insulation that absorbs sound really well.
I’ve never thought of that. I will definitely try that out. Thank you for the fantastic idea!
I like that, thanks for the idea!
Looks like you did a great job! The only worry I have is adding that much weight to the rear of my trailer, and attempting to keep 10 - 15% trailer weight on my tongue. I have a 3000 watt inverter generator, so it's small and quiet but still weighs @ 100 lbs.
100 pounds is less than a bike rack with. 2 bikes on it..... Won't notice a thing
The 100lbs is on the REAR bumper .......does not add tongue weight
@@pierreverdoni it will remove tongue weight however. For the 100 lbs you put at the very back of your trailer, the tongue weight diminishes by approximately the same. If your tongue weight becomes too light your trailer will begin to sway and can begin to have the tail wag the dog so to speak...
Nice job
That reminded me of securing my 9 inch crt tv down in my sleeper when I was driving truck. There was a tv compartment in the sleeper and a strap similar to yours to secure the tv. Never the less I was going through Louisiana one time that was quite a bumpy experience on I 10. Somehow the tv got loose and crashed to the floor. Thankfully it still worked but when I got home I went to Academy and bought an orange kick ball which was about the size of a soccer ball and I also bought a hand held pump with one of those needles for inflating the kick ball. Next time I went out in the truck I deflated the kickball enough so it would sit on top of the tv and then inflated it enough to fit against the top of the enclosure which helped hold the tv snugly within the tv enclosure. I f you any problems with your generator getting loose I would consider getting a couple of solid rubber bungee cords in addition to that strap to help secure it and keep constant tension to hold it down. Just a suggestion for what its worth.
Hello, I see it's been almost 3 years now, so how well are your mounts holding up? I am pondering on how to mount my generator on my travel trailer. Thanks.
I’m watching this real late after it was made but I’m curious how well the generator runs one ac
Ty sir
I like it. Have you thought about extending the exhaust so it goes directly outside the box?
I have thought of that but left it as is so it’s still portable. I take it in and out a lot still.
How did you assemble the box and where did you get the materials? Looking to make something similar so we can have the generator running and not worry about it getting stolen.
The box is made of galvanized steel and is welded together. Not sure where you can purchase it, mine was scraps from a shop.
how big are the louvered vents like couldn't a scumbag just pry off the vent tin snip the hole a tad larger an run off w/ the genny? I'm planning a front mounted steel gen box w/ side vents but I need to pull start my yammie. good tip on the cord, but the scumbag will proballey cut it an run off w/ it.
Nice I would like a video on how to retrofit a champion 8k generator in the factory location of my old MH generator
Damn, I was really hoping to find out where to get that box at but no link
does it bounce...the 4x4 tube twist if u push down on the box?
This is awesome! I’m going to have an aluminum box built to carry both of my predator 3500’s on the back of my Grand Design 5th wheel.
Please share once you have that done. I'd like to see it.
Thank you sir , I have been searching for a video to teach me this. I want to run a generator while my Rv is moving to power the roof mounted A/C. Where did you buy the box! Thanks a million just subscribed.
Sweet
Where did you the metal box?
Dope
Where did you get the box?
Did you make the actual box? We really want one for our generac iQ 3500. I can’t make the box. That is not in my w(eel house.
How is the rear bumper been holding up for your trailer beans the rear bumper so thin
Bob Earl there has been no bend or sag in the bumper. Since this setup doesn’t bounce or move like a bike rack would, it hasn’t caused any damage while towing down the road.
How do you maintenance it? Seems like a great idea, but a oil changes is a pain...
I just lift it out of the box. Pretty easy...
Ok... very nice... but what about the box itself? where did you get that from? You have a link for everything else but the box which is the main item....
He built the box from plate steel
Once you reach your campsite how is the vibration inside your rig
Wayne Hurley I have never ran it at a campsite but I’ve been inside the camper while it has been running and never noticed any vibration, but I never really was at the rear of trailer while running. I typically run the generator while traveling down the road for my dogs.
Is it loud
Where did you buy the box??
Great job! I just purchased a 3500 watt inverter generator for my travel trailer. I have a 300 lb capacity hitch receiver. I think your design could be adapted.
I don't know how to weld. Can you please make me one of these? Exact same generator.
Cosmik Princesz please email me at tcassis26@gmail.com
I’m in florida what place can I go to so they can create this for me? I am a woman so I have no clue how to do this! Any suggestions as to where I would go to have this done for me?
Todd how can I get the schematics on this box? I'd live to build this. That's my exact generator too so I know it will work. Awesome build and thanks for sharing!!👍🏻
I really don't have any official schematics on it. It was just sketched out on paper. However, the dimensions are 27" wide x 25" deep x 22" tall. The lid is made 1/2" bigger. I used 16" x 16" HVAC vents for the sides.
Can the a/c be operated continuesly with the generator
Jose Figueroa yes sir. Longest run for me continuously was 750 miles one way.
Help me understand why you are running the generator while driving down the road? I’m a full timer with a 2018 Bighorn 5th wheel. I have a 5500 Onan Cummins LP and don’t need to run it while towing. Curious?
Gary Gruenzner I run the A/C unit for my dogs. They ride in kennels inside the trailer because they don’t fit well inside my truck with the kids.
Thanks for the kennel reply!
We have used the th-cam.com/users/postUgkxOTeIs0vv4_9B5hsmnLsk9r930uDQLu_Y for probably 30 hours with our camper and it’s been great! The noise level is really only noticeable when running the AC and other appliances like the microwave, hair dryer, or coffee pot. It’s not huge like other ones and it has wheels so even at 90lbs, I can move it!
You should patent and sell these.
Is the generator electric start or cord pull. How do you access the pulling cord or where is the battery if electric start?
Ronald Phillips it is an electric start. I only have to use the pull cord if the battery fails, which has never happened yet. The battery is located inside the generator itself by one of the side panels.
@@todd9241982 Todd, I really really like your box and video. Thanks. Todd, you did not include any links for where you bought the actual box. I have the exact same generator with remote control where I can turn it on / off from the 5th wheel without getting out. Looking to build something like yours but have been looking on the internet to find a similar box. It would be really great if you can post the link for the box.
Ellie Fuerst Thank you for the like! A friend of mine custom made that box for me. We both discussed the plans of what I would want & need, and he actually cut and welded it all for me. Like you, I struggled on finding a box that was affordable and available.
@@todd9241982 thanks again for the response. I am still in the planning stage. What I would like to do is to use the Champion Dual Fuel 3400 on propane ONLY. I have 2 30# propane bottle on my 5th wheel that are plenty to run a long time. Can you provide the dimensions of the box? I realize your friend built it. I have a machine shop here that is willing to do the same for $300 (materials included). I like the size of the box you have as it leaves some room. Thanks again,
Ellie Fuerst the size is 25” long x 27” wide x 21” tall. The lid is slightly bigger so it overlaps that box.
Nice, where did you buy the box?
I came up with the concept and a friend helped me weld it. It's all custom made except for the bumper supports and generator box arms.
Doe it run your ac unit?
Yes, runs a 15K BTU A/C unit with no issues.
Looks good now a little red and white safety reflective tape around the box and bing .....good to go also have you thought about the gas to LP conversion for your generator. I’m sub in right now
I like the reflective tape idea! I'm going to look into that. I did consider the LP conversion, but I wouldn't have had enough start up wattage that I needed. That's why I stuck with gas. Thanks for the idea.
Tree City Travelers any T/A would have the tape some Pilot Flying J may have it .I just thought of it because I’m just a trucker and I work too much 😄😄
Just needs an exhaust pipe
CAN i get you to make me a box like that for my generator?
For some reason your links to amazon are all broken for me. I even tried a different browser because I thought it was Chrome.
Jim, thank you for letting me know. I’ll see if I can get them fixed this weekend!
You sir Should have started the generator so we could hear how loud it is in the box, it might need to be insulated with something to help with the noise but we wouldnt know that because you didn't start the generator
the generator was running at the end of the video.
Been thinking about doing the same.how is the vibration while travel?
No vibration that I’m aware of. If it sat on a cargo carrier, you would naturally have some, but this is directly bolted to the arms. I’ve never had an issue with the generator running during transit. I also used a ratchet strap over top the generator to keep it from moving as well.
i would add some sort of vibration damper on the bottom of the box to help keep the vibrations modifying sound into the trailer. also the bottom of the generator too. every little bit helps.
Get a 10 inch radiator fan
Can you power one of those through DC, or would it require AC?
@@todd9241982 I bought a 20 amp ac to dc transformer of eba y for 20 bucks and it runs the dual 10 inch 12 volt fans on my gen. box one blows in and one out the gen. does not rev from pluging in in so it does not use many amps.
I have a box truck with a built in gen. box home made and it runs a 14000 btu ac unit. Very nice!
Is this box home made or did you purchase the box and modify?
If box was purchased from where?
Great job.
schickmann the box is homemade. Thank you
Watch the video
Let me know where you travel so I can pick up your generator when it tears off the tinfoil bumper you mounted it to.
Wonder if you could still be insured with this mod for your rig
Make up kit and sell! LOT of rv owners out there build per order so not under stock load
2 to 3 K miles and he'll be looking for his gen.
Raymond Richard 2 years and still rolling strong 💪.
Extra weight on the rear of a trailer can cause sway.
Keith Burns very true, but Lippert Components told me that the bumper is rated to carry 200 lbs and I’ve never experienced trailer sway with this setup.
@@todd9241982 I wasn't criticizing todd just bringing the theory to your attention.
Keith Burns I didn’t take it that way. I appreciate your input. Thank you
Thats loud I bet.
And when you splice, is the reason RV Parks have regs on years on RVs, cause you rigged it...
The splicing has nothing to do with RV parks. This cord is only used for my generator. A 50 amp cord is used on shore power.