Thank you for your video on Generator Boxes Inc. Just received ours for our Westinghouse 4500DF. Fits like a glove. We had 2 champion 2000 portable units that I had to take of a rear rack of our 5th wheel every time I wanted connect them together. The only time I will need to touch the generator is to add gas. Thanks Bob T
Bob: you are very welcome I’m glad it worked out for you. That is what our community is all about. And as we continue to grow, comments like yours and any additional input you would like to give is what will make us the happiest. Thank you for watching.
Great video. Just what I am looking for for my Champion 4500. Question, do you have a link to that exhaust kit on there? I can't seem to find it on amazon
Hello Deborah: it is now called KSH Fuel Products. It is located in Lake Havasu. Thank you for watching our channel, and please let me know how this works out for you.
Hello: I will look for you and get back to you, however the most expensive part was the carbon fiber exhaust tube. The actual brass extension was not that expensive. I think all in it was about $100 but 90% of that was the tube. Thank you for watching our videos and I will respond with more information as soon as I can look it up.
GenExhaust for Champion 3500/3200W & 3100/2800W Inverter Generator 1" Silicon... www.amazon.com/dp/B07HBC6SVX/ref=cm_sw_r_sms_api_glc_fabc_h2JdGbKY05Q48 Please try this link from Amazon.
That’s a good design but I’m curious about how much weight you have hanging there. I want something similar to that so I can run my duel fuel champion back there instead of under my bed in the front
Hi Nathan: with box and my two champion inverters, and it comes in at about 200 pounds. The bumper is rated at 200 pounds of weight, and they did weld some bracing but I do not believe it’s welded to the frame at all. I have had no sagging, I know I have been using it for over a year. All seems to be doing well. I don’t put anything back there other than the two inverters.
Great design, instead of making removable access doors I would have tacked small hinges so they can be propped open at the bottom to keep the inside drier during rain storms
Hello there, I am putting together a box for my Champion 3100. I looked up the exhaust link that you posted, however I only see the flange and the silicone tube I would like to find the quick connect. Can you provide that info?
Hi Dave: check this out. GenExhaust for Champion 3500/3200W and 3100/2800W Inv... www.amazon.com/dp/B07HBCY3N3/ref=cm_sw_r_sms_awdb_imm_t1_G2WWR3JH8MQ13WJ53R68 Thank you for watching!
@@davebrown8282 Hi: that is standard automotive installation. We picked that up at AutoZone. We also use it inside the camper to provide black out for a couple of our windows. We just put it in behind the blinds.
The bumper is rated to hold 200 pounds. The box and two inverters weigh about 150 pounds. So no we did not reinforce it at all. Thank you for watching we appreciate your comment.
@@Foxboss9 That’s really good to know that the electric start weighs that much more. I didn’t even think about the possible difference in weight. I truly appreciate your comment and I know everyone on the channel will too. Thank you.
![[Gegagedigedagedago] NEW Help Gegagedigedagedago Nugget escape from Nikocado Avocado Challenge](http://i.ytimg.com/vi/hJWnwRC2Fz8/mqdefault.jpg)
Thank you for your video on Generator Boxes Inc. Just received ours for our Westinghouse 4500DF. Fits like a glove.
We had 2 champion 2000 portable units that I had to take of a rear rack of our 5th wheel every time I wanted connect them together.
The only time I will need to touch the generator is to add gas.
Thanks
Bob T
Bob: you are very welcome I’m glad it worked out for you. That is what our community is all about. And as we continue to grow, comments like yours and any additional input you would like to give is what will make us the happiest. Thank you for watching.
Mr. Bob what model generator box did you go with for the westinghouse 4500df, i have the same generator and am looking to mount it on the bumper.
Great video. Just what I am looking for for my Champion 4500. Question, do you have a link to that exhaust kit on there? I can't seem to find it on amazon
Hi Robin. Let me see if I can find that link. Thank you for watching.
GenExhaust Universal Generator 1" Silicone tubing Exhaust Extension 3 Foot Le... www.amazon.com/dp/B07HFHSD1T/ref=cm_sw_r_sms_api_i_6MEVFR3GCF9DRGFGHY0N
Is it loud inside the trailer? I would think the vibration would transfer to the trailer while running.
It wasn’t that bad. Not any worse than others I’ve had.
I have tried to find this company online or even search in Lake Havasu AZ and no luck. Can you provide the info about this company? Thanks
Hello Deborah: it is now called KSH Fuel Products. It is located in Lake Havasu. Thank you for watching our channel, and please let me know how this works out for you.
Nice job god bless
Thank you
How did you mount it?
Hi Dave: they mounted it to the frame with bolts. They also threw bolted on the bumper. It’s solid as a rock
Hi. Where did you buy the exhaust extension and how much? I can't find it on amazon. Thank you.
Hello: I will look for you and get back to you, however the most expensive part was the carbon fiber exhaust tube. The actual brass extension was not that expensive. I think all in it was about $100 but 90% of that was the tube. Thank you for watching our videos and I will respond with more information as soon as I can look it up.
GenExhaust for Champion 3500/3200W & 3100/2800W Inverter Generator 1" Silicon... www.amazon.com/dp/B07HBC6SVX/ref=cm_sw_r_sms_api_glc_fabc_h2JdGbKY05Q48
Please try this link from Amazon.
That’s a good design but I’m curious about how much weight you have hanging there. I want something similar to that so I can run my duel fuel champion back there instead of under my bed in the front
Hi Nathan: with box and my two champion inverters, and it comes in at about 200 pounds. The bumper is rated at 200 pounds of weight, and they did weld some bracing but I do not believe it’s welded to the frame at all. I have had no sagging, I know I have been using it for over a year. All seems to be doing well. I don’t put anything back there other than the two inverters.
Great design, instead of making removable access doors I would have tacked small hinges so they can be propped open at the bottom to keep the inside drier during rain storms
Hello there, I am putting together a box for my Champion 3100. I looked up the exhaust link that you posted, however I only see the flange and the silicone tube I would like to find the quick connect. Can you provide that info?
Hi Dave: check this out.
GenExhaust for Champion 3500/3200W and 3100/2800W Inv... www.amazon.com/dp/B07HBCY3N3/ref=cm_sw_r_sms_awdb_imm_t1_G2WWR3JH8MQ13WJ53R68
Thank you for watching!
@@ramblingonrv2252 Thank you. Happy safe travels!
Also wanted to ask about the insulation you used.
@@davebrown8282 Hi: that is standard automotive installation. We picked that up at AutoZone. We also use it inside the camper to provide black out for a couple of our windows. We just put it in behind the blinds.
Thank you. Safe travels to you as well. Thank you for watching.
Great review. Question, did you have to reinforced the rear bumper?
The bumper is rated to hold 200 pounds. The box and two inverters weigh about 150 pounds. So no we did not reinforce it at all. Thank you for watching we appreciate your comment.
Heads up... Just 1 Champion weighs in at 75(pull start) to 110lb(electric start)... Just be cautious.. 👍
@@Foxboss9 That’s really good to know that the electric start weighs that much more. I didn’t even think about the possible difference in weight. I truly appreciate your comment and I know everyone on the channel will too. Thank you.
Power!!!