Chrysler 300 air vent not the same temperature fix

Hi in this video I will show you how you can fix your air vent if one side is hot and one is cool,, this will work on any car with dual climbing control
www.ebay.com/itm/Dorman-604-0...

[@tyronecuffee3888]

Bro I just followed your video to the letter and u were exactly right!! I replaced the part and ran my 300 for 10 mins and turned the heat on and it was fixed 💯 thanks for the video man 👍🏽

[@nestorautorepair]

Thanks boss I'm so happy it work out for you thanks for your feedback

[@nevenkakuka5651]

Thank you for the video I had my 91/2 year old grandson replaced it on my 2005 Chrysler 300 so easy to fallow instructions !

[@nestorautorepair]

Hey thanks tell your grandson to keep it up, thanks for your feedback boss

[@carolynmattazaro6516]

Your video was so helpful. Liked that you showed how to remove the dash panels. Thank you

[@nestorautorepair]

You're welcome , thanks for your feedback

[@someonesboi6099]

Just did it! Thanks for the video. Those 3 screws were mission impossible tho, to remove and to put back.

[@nestorautorepair]

You're welcome boss thanks for your feedback

[@KeepinItReal138]

Bro fr shit was a pain in the ass especially the one in the back you can barely get to it bc the plastic near it

[@Zer0ctopus7]

GAH, THANK YOU so much. You answered all the questions that no one else seemed to in all the other videos I've watched so far. I'll be tackling this problem soon. Thanks again, man. Subbed.

[@nestorautorepair]

Thanks for your feedback boss

[@carlitostado2954]

I fixed my 2015 Charger Rallye(part number is different) and it cost less than going to the dealership. Thanks for the video!

[@nestorautorepair]

U welcome thanks for your feedback

[@imrankasen5872]

@Maxwell Onyx instablaster ;)

[@cobyj2563]

Thanks for the video helps a lot. Shops was gone charge me 150-200 dollars to install smh.

[@nestorautorepair]

You're welcome boss , thanks for your feedback

[@jaytee4460]

My car throws warm air through driver side and cold on passenger side. Thanks for the video on all the info !

[@nestorautorepair]

Yes sir your very welcome

[@gimmydurant6303]

Thank you. This will help me tremendously

[@nestorautorepair]

You're welcome boss , thanks for your feedback

[@DoronBond]

Spot on! Good video! Mine is not doing it but now I know how to repair.

[@nestorautorepair]

Thanks bro

[@DoronBond]

@@nestorautorepair quick question…how can I contact you? I have a question about my recirculation feature on my 06 Chrysler 300. The light is showing on but when I play the ac I can still smell fumes from other cars while I’m driving

[@nestorautorepair]

Oh you can call me there is my cell number on my info , sound like the door blender for the outside air is bad

[@DoronBond]

@@nestorautorepair I looked for your number…..but that door blender sounds about right …is it fairly easy to install?

[@nestorautorepair]

Yes it is easy
571 267 8581

[@bxpak1975]

Thanks for the video.. mine is blowing warm air in the rear.

[@Teddy_Stream]

Thank man , this video helped a lot

[@emmanueldavis2010]

Thank you.

[@nestorautorepair]

You're welcome

[@pierrepoitras1798]

Thanks dude! Exactly my issue today on my 08 300c

[@nestorautorepair]

You're welcome , thanks for your feedback

[@lololucero1]

I appreciate the video.. so I’m trying to get the passenger side to blow out cold air like the driver side. When I turn on the cold air the passenger side is blowing out hot 🥵 air. Is this the way I fix my problem?

[@seggy5564]

difference between 604_021 & 604_004? also have updated link that one doesn’t seem to work thanks for vid!

[@wizorm]

Will the part you used work on the 06 magnum with dual climate control ? Thanks for the video

[@nestorautorepair]

I think they are the same yes but at the auto parts they will tell you better

[@user-hq3sb9fp9m]

Good job

[@nestorautorepair]

Thanks 🙏🏻

[@stevewalls8172]

Thanks !

[@nestorautorepair]

You’re welcome

[@bernardo1969bs]

Thanks for video man. My car is not cooling on passenger side. Would you do the same procedure but under glove compartment?

[@nestorautorepair]

Yes sir same procedure, you're welcome , thanks for your feedback

[@magnum9015]

I have a Lancia Thema built in 2013, is it built in the same way? The heating on the driver's side stays cold

[@tomcraftdonkey2285]

I have temperature problems on both sides as well as mode changing problems. Does this mean that I should replace the 2 on the driver's and one on the passenger side? I have a 2011 chrysler 300c.

[@nestorautorepair]

More likely yes both are bad

[@jesusceja1056]

I had a hard time to change the actuator not much room you can use only one hand...but its easier if you remove the seat ..only 4 bolts 3 plugs and its easier 80% more..Chrysler 300C. 2006 actuator on driver side

[@nestorautorepair]

Nice!! Thanks for your feedback

[@rufusjackson4229]

Hi mines blowing cold on passenger hot on driving

[@vincentenk4449]

Thank you sir!

[@djortiz]

Yup! good job bro!! those small screws are a pain in the A$$!!

[@nestorautorepair]

Lol yes sir

[@jfowler53]

i will be trying this soon on my 2010

[@nestorautorepair]

Ok boss

[@Life_as_a_cute_girl]

i have a 2013 300 base, the back vents blows out warm the front blows out cool but not cold like it should i tried the freion and the was told by family i needed a blend door actuator, would this still fix the problem? how many actuators do i buy ?

[@Life_as_a_cute_girl]

do i buy one for the back or buy one for driver side and one for passanger side then the air sh0uld blow out strong nd cold thru out the car, right?

[@nestorautorepair]

Hi first have it recharge it can just be low on freon

[@JesusMartinez-fr6bo]

2014 chrysler 300 passenger side air is hot driver side and rear air is cold which accuator should i change?

[@nestorautorepair]

The one on the side that is not changing the temperature door blender

[@oofergang-6875]

I can’t reach the screws to unscrew the old part any tips?

[@sameerjawale8673]

Did you use a 604-004 HVAC Air Door Actuator? I saw one on Amazon.

[@nestorautorepair]

604_021 is the one I use

[@nestorautorepair]

www.ebay.com/itm/Dorman-604-021-AIR-DOOR-ACTUATOR-MODE-/333487992465?_trksid=p2349624.m46890.l49292

[@vracerv]

Difference between 004 and 021?

[@nestorautorepair]

I can't remember witch one I use

[@normski262]

Is this the same for the 2006/7 300c crd wagon 604-021

[@nestorautorepair]

If they looks the same yes

[@artart7943]

what year 300 is this, my part number seems to be different. I have 05 300c

[@tylermacnaught5565]

do you need to calibrate it after replacing it?

[@nestorautorepair]

No

[@kennethhoule5883]

when i have my ac on the left side blow cold but the right side blows hot, should i replace the side on the right

[@nestorautorepair]

Yes replace the side that is hot.
But first make sure you recharge the ac if is low it will also do this

[@barberking4920]

I also have the right side blowing warm air when ac is on. I just replaced the blend door actuator and still dose the same thing what should I do next?

[@nestorautorepair]

The question is if you change the correct one there are 3 of them

[@happytimeknowledge]

Plus if your compressor is low on refrigerant then it can also cause one side to blow warmer than the other side. At least in my srt8 it did that. I just went to local auto parts store and bought a can of 134 recharge and charged it myself. Both sides are now cold. Not saying that's your problem but it's just one thing I have ran into with my 300.

[@nestorautorepair]

Correct , thanks

[@YTNKos]

What is the part called ? I need one 2006 srt8 charger

[@YTNKos]

Also this is for the ac to right ? Not just the heater ? My issue is cold air comes out the driver side but not on the passenger side

[@bassinurfacerik2990]

Where is that part from autozone??

[@83wasagoodyear]

Have same problem but I don't have dual temp controls

[@nestorautorepair]

Same fix

[@michaelwashington2682]

my question is i just bought a chrysler300 2007 and heat comes through the vents when driving and all controls are off. and its causing the ac not to keep cool. do anyone have an idea? thank yall

[@nestorautorepair]

Sound like your main door blender is bad

[@michaelwashington2682]

@@nestorautorepair thank you! Never heard of that before but I will get it checked out because I don't know how to do it are where to begin looking for it LoL

[@nestorautorepair]

Ok no problem

[@nestorautorepair]

Here is one of my video link
th-cam.com/video/1caE4MN5BdU/w-d-xo.html

[@jmk_830yt6]

Will this work on a 2019 Chrysler

[@nestorautorepair]

Yes

[@sigtx8263]

I replaced that part, but still have the same problem; what else might cause this?

[@nestorautorepair]

Maybe when the old one when bad it burn the fuse ,, check all the fuse

[@thatdudeleo9068]

@sig tx did you ever find out the issue? I’m having the same problem on a 2006 charger R/T

[@nestorautorepair]

Ok

[@sigtx8263]

@@thatdudeleo9068 hey DudeLeo, no, I still have the problem. I opened up the servo that I replaced and It was actually still good. Only 2 wires, switched 12 volts between the 2 and the motor would run in either direction.. There’s a round knob that the servo is supposed to spin. I could spin that freely with my fingers, so that wasn’t buggered up either.

[@nestorautorepair]

Ok

[@xanris74dj]

Appreciate the video buddy

[@nestorautorepair]

You’re welcome boss

[@c_blam_em]

I replaced actuators and pumped freon, still won’t blow cold air

[@texasmarine56]

Same steps for a 2009 300?

[@nestorautorepair]

Yes I believe so

[@labinothoxha6128]

Für chrysler 300c 2008 ?
Ist gleich ?

[@RAGEGamingRevolution]

Ya das ist gute

[@nestorautorepair]

Ok

[@aurelmoumeni3246]

I have the same Problem now
Thank you
Awesome 🫡

[@gogafirenze9572]

👍✌💪💪👏👏

[@nestorautorepair]

Thanks

[@choloivan8334]

Yo bro what was the part called?

[@nestorautorepair]

Climate control

[@kymbass2057]

What is that part called exactly so I can call and get one it’s too hot in texas to not have ac

[@nestorautorepair]

Climate control

[@missyhothi7931]

🙏🙏🙏🙏🙏🙏

[@fbbc6495]

great thanks .dude

[@oaklandsportnewscom]

Thanks guy!

[@matthewerwin8613]

Sizes? Or just 🪛 needed