Awesome this is working on MiSTer now! To assign a controller to port 1 in any core, its quite simple. Just choose the "Reset player assignment" option in the OSD, just below the input binding options. The first controller you press a button on after that is assigned as player 1.
I don't know how you did that, I've spent weeks on it and it still doesn't work! My lightgun is on 1.9, joystick mode, it's detected when I launch the script Start Lightgun, even the camC is detected. Still, can't use the controls on the lightgun to navigate menus, and of course can't use it in any games using the NES_sinden core. The white border and crosshair appear fine, the input settings are all the same as in the video. I even removed my gamepad and relaunched the Mister to use the gun as first controller. Nothing works, I'm lost. Can someone help me please? :(
@@JoeHedrick Hello Joe, thanks for the proposal, I'd love that. I managed to set it up to access the menus but now the trigger doesn't work and the crosshair doesn't seem to move. I'm on Discord, I'll send it to you in PM
Love my sinden wish someome would release a huge build with everything on it. The sinden is held back cos of this and more people would jump on board. Yeah theres a few builds out there but nothing perfect and requires tinkering which most people cant or dont have the time.
I keep getting "read only" errors when it's trying to install the LIB files user /user/lib. I had to change the folder permissions using WINSCP on the folder and drag them in manually using FTP.
Works good for me... Duck Hunt crosshairs seem to be off a little, is there a way to calibrate the crosshairs to be in the centre of where the scope is aiming?
Mine arrived today. At best, my little crosshair basically skims along the top border in a very jerky fashion. That's in the NES core, which is as good as it gets. psx/gen just sit there in the middle. SNES seems to pull up a controller option screen and crazily rotate through l/r button assignments. Works on PC, just hates the mister.
Sinden guns are really too complicated :( I regreat my two guns. I never really succeed to use it correctly. Don't want to wast more hours in configuration.
And wifi for me. This is using an old version of MrFusion that's incompatible with the current MiSTer wifi and bluetooth drivers. Recommend a clean install for this to work correctly.
@@benjaminapeterson unfortunately I don't want to replace the 200gb of data and have to reset up everything on the SD card again. All my settings for dos games, my entire library of games.. etc. I'll just want from them to put out the kernel update.
After installation, I keep getting this error when launching the LightgunStart-Default script: Press any key to continue Error loading shared library: /tmp/mono-bundle-SOQaUG/libmono-native.so libgssap i krb5.so.2: cannot open shared object file: No such file or directory
Outstanding how far this project has come, the utmost props to you for reviving the lightgun for the flatscreen age
Awesome this is working on MiSTer now! To assign a controller to port 1 in any core, its quite simple. Just choose the "Reset player assignment" option in the OSD, just below the input binding options. The first controller you press a button on after that is assigned as player 1.
Amazing update for the Sinden guns! Cannot wait to try this on my mister, since its usually problem free once cores are set up.
Great video, just ordered two. Thnx for the amazing update. finally get to play my old favorite lightgun games again in the livingroom on the tv :)
This is what I have been waiting for! Thank you so much.
Well done bud, love that this is finally out!
Thanks to the set up scripts on the github I got mine up and running in a couple of minutes. Great work!
I don't know how you did that, I've spent weeks on it and it still doesn't work! My lightgun is on 1.9, joystick mode, it's detected when I launch the script Start Lightgun, even the camC is detected. Still, can't use the controls on the lightgun to navigate menus, and of course can't use it in any games using the NES_sinden core. The white border and crosshair appear fine, the input settings are all the same as in the video. I even removed my gamepad and relaunched the Mister to use the gun as first controller. Nothing works, I'm lost. Can someone help me please?
:(
@@Zep2000 I can try to lend a hand. Are you on the discord?
@@JoeHedrick Hello Joe, thanks for the proposal, I'd love that. I managed to set it up to access the menus but now the trigger doesn't work and the crosshair doesn't seem to move. I'm on Discord, I'll send it to you in PM
@@JoeHedrick yes, my user is different though, it starts with NRJMons
Nice. I didn't know could do this, I will be looking at setting this up!
Awesome, I built myself a Mister setup (solder it allll by myself cos I’m a big boy now!) a few months ago - can’t wait to try this out!
Ordered 2 as well.
Great stuff!!! Thx!
Is it actually possible to play with two guns for 2 players games?
Love my sinden wish someome would release a huge build with everything on it. The sinden is held back cos of this and more people would jump on board. Yeah theres a few builds out there but nothing perfect and requires tinkering which most people cant or dont have the time.
The complexity (or impression of complexity) definitely holds it back.
@@Galgomite they exist but people are charging
it's plug and play on batocera. zero tinkering required
I keep getting "read only" errors when it's trying to install the LIB files user /user/lib. I had to change the folder permissions using WINSCP on the folder and drag them in manually using FTP.
Works good for me... Duck Hunt crosshairs seem to be off a little, is there a way to calibrate the crosshairs to be in the centre of where the scope is aiming?
Mine arrived today. At best, my little crosshair basically skims along the top border in a very jerky fashion. That's in the NES core, which is as good as it gets. psx/gen just sit there in the middle. SNES seems to pull up a controller option screen and crazily rotate through l/r button assignments. Works on PC, just hates the mister.
What’s the ETA on sinden support for other consoles/mame etc ? Thanks
for some reason my sinden cores dont show a border? changing the video scale doesnt change anything. theres just 0 white border anywhere
Can this be added to existing installs using something like Update_All?
How big does the SD card have to be if I only want to use it for Lightgun games?
Sinden guns are really too complicated :( I regreat my two guns. I never really succeed to use it correctly. Don't want to wast more hours in configuration.
I use mine with Batocera, and they're largely plug and play.
Installing this broke my Bluetooth support.
And wifi for me. This is using an old version of MrFusion that's incompatible with the current MiSTer wifi and bluetooth drivers. Recommend a clean install for this to work correctly.
@@benjaminapeterson unfortunately I don't want to replace the 200gb of data and have to reset up everything on the SD card again. All my settings for dos games, my entire library of games.. etc. I'll just want from them to put out the kernel update.
Die hard
After installation, I keep getting this error when launching the LightgunStart-Default script: Press any key to continue
Error loading shared library: /tmp/mono-bundle-SOQaUG/libmono-native.so libgssap i krb5.so.2: cannot open shared object file: No such file or directory
Same here. ☹