This is by far the best general purpose MiSter setup tutorial I have ever seen, thanks! Also thank you for providing an alternative board in a kit at a reasonable price. FPGA gaming needs more people like you Taki.
My MisterPi kit arrived today (the mega pack) & I've assembled it as per the video, downloaded the image, installed it on a card & downloaded some DOS games to test. Worked perfectly the first time! I even got the wifi working without knowing how to do it! I'm absolutely thrilled to understand more about it all & am copying over some ROMs to see how they go. Great work Taki & team - just brilliant!
I found out about this today and at first I had questions. Then I saw this video and noticed the Cyclone V chip and I instantly understood. This is a great contribution to the MiSTer community and hopefully the price point will bring more people into it. The DE10 board has been ratcheting up steadily, and quite frankly if mine were to break today, this would probably be my choice rather than another DE10.
@@livinlicious exactly, DE10 prices have been going nowhere but up recently and some places are charging ridiculous markups on top of that. 160 for the Cyclone board alone would be a bargain, but this is a phenomenal deal.
I pulled over on the side of the interstate to get my order in this morning, super excited for this kit, to be getting a deal, and to be supporting Taki's business endeavor. 🎉🎉
Taki, you rock - hope the launch of these boards doesn't get sucked up by the scalpers and resold for higher amounts. This world is horrible for this sort of thing.
Hopefully that won't be a problem as if the price goes too high it will put it in the price range of the Terrasic board. Taki also said it would be one per customer.
Hopefully supply is steady enough to make scalping pointless. Scalping only exists if demand outstrips supply. Remove that and you have no scalping market. More so buyers have to resist buying from scalpers. If they have no buyers, they have no market.
I was lucky enough to get one of the first batches of the MegaPack. Waiting anxiously. Been wanting to build one of these for a while. Now I just need to get reading and watching videos on setup etc. Thanks again for this.
This is so exciting! Even though I already have a MiSTer and it works great, I sometimes worry about if something happened to it or it died on me one day. It’s reassuring to see DE-10 Nano alternatives coming out at more affordable prices. Let’s hope there are no major supply issues and that everyone who wants a MiSTer can get one. Great job!
Watching someone unplug a device, to power it off, always reminds me that connectors have a limited lifespan. The switch on a power cord (shown near the start) is one solution to this. A switch on the product would also be nice - but with 2 power connectors on the FPGA board, and a third on the top board, placing a switch would be tricky. Easier to look for a power supply with a switch instead.
Looking good! I jumped in and bought a MiSTer at the beginning of the year and spent a small fortune. Now that your products have an impending release, I'll be able to buy one without batting an eye. Great tutorial!
That feels redundant (of course, needing to save after turning on autosave is familiar to some retro gamers), but you'd be surprised at how foolish people can be...
I can't wait to see people build a handheld shell for this thing. I'll probably buy the mega bundle, considering how cheap it is. I've wanted an FPGA solution for some time, but the price has always held me back. Absolutely perfect product for a demographic that has shown to be large enough to buy into it.
Great to see this finally become a reality. A reasonably priced mister or original priced mister is incredible to see again. Excited for the handheld version that will eventually come out.
So excited to give this a try! I see you're busy working at creating new stock. Really hope I can jump on it and order it as soon as available. I like your style you know what's up.
It's not just misleading, it's downright confusing and is bad marketing. Not only does it make it seem like a Raspberry Pi is somehow involved, but when you google "Mister Pi", you get results for the m32pi, which is a completely unrelated product. All griping aside, I am very grateful to Taki for providing a solid, affordable way to make a Mister.
Wonderful video and product! For those like me who are new to MiSTer, one tip that I would add is that the MicroSD slot (which might initially be hard to find) is under the MiSTer board.
Super hyped Taki. Thanks for making a complete beginner video to help us noobs get it spun up, while taking the time to show how it integrates with others existing boards. That's a very classy way to approach selling a product.
Great video, very thorough. I've had my analogue I/O board based MISTer with 128 RAM and I want to get a second unit. This version looks like a good investment.
Had the page up all day. Waiting for checkout then got sold out message after 4 mins. Hopefully get in on next sale. I really hope they didnt get grabbed by scalpers. I know it was limited to one but you know how crafty they can be. Its awesome that your making this so affordable.(update) Got one of the full kits in the 2nd sale! Thanks!
Thanks dude! I bought the full system from your website today. 😊 And honestly, I'm so happy that it can do the Commodore PET and VIC-20, my childhood computers. (Yes I'm very old...) I'll look into the consoles too. They seem cool to play. 😁
Great advice if our own choice was the only one that mattered but it’s not. Other people will always buy from scalpers. Your advice is worthless since it’s not realistic or in the realm of reality.
Should have gone all out with the confusing and lazy naming and called it the iMisterPi. Having said that, seeing a product like this come out is amazing. Congrats!
fpgas really need native analogue output (or atleast an addon board that adds native analogue output). Since it finally gives us perfect "emulation", it also gives us the perfect real output for the authentic CRT experience. I am hoping the FPGa growth will lead to CRT gaming growth
I managed to snap up one of the Turbo Packs from the 2nd batch. Is the wireless adapter included, or was that a 1st batch exclusive? It doesn't look like it was part of the contents. Excited either way!
Great to see this project coming together :p Interesting to see that there's a fan but no need for a heat sink. Guess the heat is manageable with just that? I'm looking forward to seeing how this turns out :) I'll probably be waiting for the future more consumer friendly version myself. Looking forward to seeing that and the handheld in the future =)
Still waiting to get one of these from you, they are always sold out and I can't seem to beat the BOTS at getting one. Is that situation going to improve soon? My kids really want to have one of these! Thanks for all your hard work. We have a 4 and 8 year old here waiting for availability! We want the mega pack!
Thank you for such an excellent video and for demonstrating compatibility with MisterAddons IO digital board. Can you confirm the Mister Pi also works with the IO Analog pro board, the one with the Saturn AV port?
Taki, will you offer different accessories for MISTer Pi? We need a MISTer to JAMMA adapter so that we can plug it into our arcade cabinets that are JAMMA wired.
Another drop this morning and it sold out in less than an hour. Guess if you want one the only way to get it will be paying a scalper 5x for it, and at that point it's no different than getting the old hardware. Really disappointed and I hope they can make larger drops.
i dont get how its a pi when it a cyclone chip? is this like when apple released ipod every one whent I crazy i steam iron i toastie maker? i thought for a pi it had to use a raspberry pi at its core ?
Amazing work! Just wondering why the Mister Pi negotiated 9V from the PD power supply when the power supply also offered 5V 3A? (15 min 20 sec). Thanks
This is super amazing, Looking forward to all the up coming release. Just one Complaint, where Can I get a Metal case for this? Or at least CAD shows where all yhe ports are located, so I can design my own 3D print Case for it for the time being? Keep Up the good work!
Congrats on the launch. Tried to get one in batch 1 and failed miserably...clearly I need to enter my card details in less than 30sec to stand a chance 😂
1st week of October came and went and there wasnt any notice of being back in stock. I thought i signed up for the newsletter too and wasnt made aware of any restocking... I would love to buy this but doesnt seem like that will happen anytime soon...
Hey Taki, I think you should have made it clear that this was a clone of the typical de10 nano MiSTER. As a viewer who has a MiSTER, but has not been following the scene, I didn't know from this video what it was; I had to look it up to see if it was some sort of cut back version lacking features or compatibility. I think it would behoove you to make it clear in the intro that this is not the case, particularly because Pi in the name of many similar devices directly imply that the guts are based off of the Raspberry Pi.
i got this a few days ago. but i haven't gotten the ram pack (nothing to do with taki I bought the board and the ram seperately and there was flooding so the package with the ram got delayed) ive done the setup but im not sure what cores work without the expansion pack. so im waiting to try it out when i get it delivered on monday. :) super happy with this product I am working on making it a portable :D
Wait... i might have missed something but is this affiliated with like raspberry pi? or is it just called that because of the size and shape? also out of curiosity, what was the inspiration for this product? just to get more people into fpga dev? Or is this meant primarily just to be a smaller option for diy handheld retro emulation?
I was hitting F5 for both launch windows on the website and never even saw the button change from SOLD OUT. I never even got a chance. This is Analog Pocket all over again.
If you spam f5, your browser won't actually reload the page, it will just show you a cached version. You have to press Ctrl+f5 to bypass the cache. This is what I did, and I bought my mister pi just fine.
As a complete noob on this and having watched the whole video, I still dont know the benefits of this board over an emulation device, there should be but I dont know them
Software emulation vs hardware emulation. It’s one step closer to the using the actual hardware and software. Software emulation needs to translate everything to run in modern hardware. Hardware emulation mimics the actual hardware, so nothing needs to be translated. Can a software emulation feel as good as hardware emulation, possibly, but often the hardware emulation feels closer to the real thing.
some benefits - with a snac adaptor you can plug in your real controllers with zero latency - this includes your real n64 controller's gameboy expansion pack, hook up your real pokemon game to pokemon stadium e.g. - or hook up a real gameboy to your device with an actual link cable and trade with it - it does 0 latency analogue out, and hdmi out - the audio and video is perfectly synced because it doesn't run on a buffer, the chips are all simulated in parallel like in a real console - crt effects work, like visual effects that run by abusing the real time of an electron gun moving in a crt to make visual effects, or lightguns - you can overclock the cpu. like run an n64 or psx on "real" hardware just overclocked without changing the simulation speed - it looks, sounds and feels perfect
"Almost here" took longer than expected: th-cam.com/video/8RSrzM7dM-Y/w-d-xo.html
😅
Great work - well done keeping your integrity intact during all the fuss. We're patient and grateful!
But when can we buy it?
Do I spot a SATA port next to the fan there? Can I connect an internal SSD and throw my roms on that?
Where dat switch lite OLED screen at though 😮
After this second batch, will you have more because I can't purchase it this week but I would love to buy one next week
The Master System callbacks on the packaging
I recognised Master System straight away when I saw the grid lines.
Same I like it
This is by far the best general purpose MiSter setup tutorial I have ever seen, thanks! Also thank you for providing an alternative board in a kit at a reasonable price. FPGA gaming needs more people like you Taki.
My MisterPi kit arrived today (the mega pack) & I've assembled it as per the video, downloaded the image, installed it on a card & downloaded some DOS games to test. Worked perfectly the first time! I even got the wifi working without knowing how to do it! I'm absolutely thrilled to understand more about it all & am copying over some ROMs to see how they go. Great work Taki & team - just brilliant!
I just received mine, and its great!
I found out about this today and at first I had questions. Then I saw this video and noticed the Cyclone V chip and I instantly understood. This is a great contribution to the MiSTer community and hopefully the price point will bring more people into it. The DE10 board has been ratcheting up steadily, and quite frankly if mine were to break today, this would probably be my choice rather than another DE10.
its 160 bucks for everything with all extra boards. I cant get the DE10 board here for less than 280 if lucky.
this is an insane steal.
@@livinlicious exactly, DE10 prices have been going nowhere but up recently and some places are charging ridiculous markups on top of that. 160 for the Cyclone board alone would be a bargain, but this is a phenomenal deal.
I pulled over on the side of the interstate to get my order in this morning, super excited for this kit, to be getting a deal, and to be supporting Taki's business endeavor. 🎉🎉
Hope I’m able to get one. I’ve been interested in the Mister project for years but this is definitely the time for me to jump in.
I want one too. But I doubt we can actually get one.
I've been meaning to buy a mister ever since the only games it could play were galaga and pacman lol. Waited a bit long
the de 10 nano will always be better
@@sadeness How? it's the same exact thing
@@Jasonsadventures it costs more therefore it’s more betterer. Child logic.
Taki, you rock - hope the launch of these boards doesn't get sucked up by the scalpers and resold for higher amounts. This world is horrible for this sort of thing.
Agreed... Hope he ups the quantity for follow-on runs
Hopefully that won't be a problem as if the price goes too high it will put it in the price range of the Terrasic board. Taki also said it would be one per customer.
@@DryadMachinethat’s a good point. There is a definite limit on scalper margins since the whole point of this is to be a less expensive FPGA board
Hopefully supply is steady enough to make scalping pointless. Scalping only exists if demand outstrips supply. Remove that and you have no scalping market. More so buyers have to resist buying from scalpers. If they have no buyers, they have no market.
Well, they won’t be able to sell them for more than the QMTech boards, which are barely more expensive than Taki’s
I really hope scalpers don't ruin this for everyone. I really want to get my hands on one of these.
Right? Agreed 💯
I was lucky enough to get one of the first batches of the MegaPack. Waiting anxiously. Been wanting to build one of these for a while. Now I just need to get reading and watching videos on setup etc. Thanks again for this.
Just got the kit, followed your instruction and took 15min to put together. It works flawlessly, what an amazing kit
Mine shows an error on update all. Any idea?
@@pejiSLB Did you setup your wifi password?
This is so exciting! Even though I already have a MiSTer and it works great, I sometimes worry about if something happened to it or it died on me one day. It’s reassuring to see DE-10 Nano alternatives coming out at more affordable prices. Let’s hope there are no major supply issues and that everyone who wants a MiSTer can get one. Great job!
Watching someone unplug a device, to power it off, always reminds me that connectors have a limited lifespan. The switch on a power cord (shown near the start) is one solution to this.
A switch on the product would also be nice - but with 2 power connectors on the FPGA board, and a third on the top board, placing a switch would be tricky. Easier to look for a power supply with a switch instead.
Looking good! I jumped in and bought a MiSTer at the beginning of the year and spent a small fortune. Now that your products have an impending release, I'll be able to buy one without batting an eye. Great tutorial!
25:00 Don't forget to "save settings" after turning on Autosave!
That feels redundant (of course, needing to save after turning on autosave is familiar to some retro gamers), but you'd be surprised at how foolish people can be...
I can't wait to see people build a handheld shell for this thing. I'll probably buy the mega bundle, considering how cheap it is. I've wanted an FPGA solution for some time, but the price has always held me back. Absolutely perfect product for a demographic that has shown to be large enough to buy into it.
Taki is working on a handheld already.
Great to see this finally become a reality. A reasonably priced mister or original priced mister is incredible to see again. Excited for the handheld version that will eventually come out.
So excited to give this a try! I see you're busy working at creating new stock. Really hope I can jump on it and order it as soon as available. I like your style you know what's up.
Using the name Pi is a really strange choice, but you made some nice improvements to the actual hardware.
It's inexplicable
Will put people off, I nearly didn't look at this because no interest in RasPi.
It certainly makes googling a 'fun' activity lol.
It's not just misleading, it's downright confusing and is bad marketing. Not only does it make it seem like a Raspberry Pi is somehow involved, but when you google "Mister Pi", you get results for the m32pi, which is a completely unrelated product.
All griping aside, I am very grateful to Taki for providing a solid, affordable way to make a Mister.
Yeah, this was a huge mistake on his part.
I've got a DE-10 MiSTer setup already, but I could still see myself getting this as a backup, or first, as a gift for a friend.
Wonderful video and product! For those like me who are new to MiSTer, one tip that I would add is that the MicroSD slot (which might initially be hard to find) is under the MiSTer board.
Congratulations to the launch, I hope your products become very successful. I'm specifically interested in your handhelds and the flagship build.
Super hyped Taki. Thanks for making a complete beginner video to help us noobs get it spun up, while taking the time to show how it integrates with others existing boards. That's a very classy way to approach selling a product.
160USD FOR EVERYTHING?
Damn son. Good work.
Sign me up. Batch1 already sold out, but im gonna definitely buy. This is a steal.
Thank you for making this video explaining everything.
$160 for the whole package? HOLY SHIT! You weren't joking. I'm gonna be on this like white on rice!
You mean like yellow on rice? :)
@@ignacio6454 Only if I added turmeric to it. 😏
Did you manage to get one?
Great video, very thorough. I've had my analogue I/O board based MISTer with 128 RAM and I want to get a second unit. This version looks like a good investment.
I'll wait for the sequel where you add a hair bow and call it Mrs Pi. 😊
I smell a visual mod!
just received mine today!!! cant wait to try it :D :D watching video now for assemply
my memtest is at 122mhz :(
I love the master system scheme boxing
That's a lot of words to describe a simple pin to pin coupling action, the review was nice :D
Had the page up all day. Waiting for checkout then got sold out message after 4 mins. Hopefully get in on next sale. I really hope they didnt get grabbed by scalpers. I know it was limited to one but you know how crafty they can be. Its awesome that your making this so affordable.(update) Got one of the full kits in the 2nd sale! Thanks!
Thanks dude!
I bought the full system from your website today. 😊
And honestly, I'm so happy that it can do the Commodore PET and VIC-20, my childhood computers. (Yes I'm very old...)
I'll look into the consoles too. They seem cool to play. 😁
Not calling it the mister system when you got cool master system packaging is crazy.
Looks cool! I don’t get why it’s called Mister *Pi* though? It makes it sound a lot cheaper and less interesting than it is 😂
Super happy to see you installed my boot roms 21:32 😊 can't wait until you release the handheld console version. I will grab one for sure.
You did a great job!
Waiting to buy console and handheld...my first fpga!
For everyone complaining about scalpers and fearing a price explosion.
There is a very simple solution:
NEVER BUY FROM SCALPERS!
Great advice if our own choice was the only one that mattered but it’s not. Other people will always buy from scalpers. Your advice is worthless since it’s not realistic or in the realm of reality.
Those 3 button 3 LED circuit boards remind me of the boxes that used to get free pay per view in the 00's. 😂
Just wanted to let you know I received my mega pack and been having a blast tinkering with it.
Dude, Love the Master System font and grid. Thank you.
The hype is REAL! Can't wait to finally get my own MiSter
Very excited to get mine in the mail!!!
Way to make it happen. Thanks for your efforts making this project more accessible
Only heard about the MiSTer system a couple months ago but definitely interested in giving it a go. Hoping I can grab one of these and get started.
It would be amazing to receive a unit for review, testing, and comparisons with another MiSTer FPGA clone that I already own.
Looks awesome. When will this be available again?
Should have gone all out with the confusing and lazy naming and called it the iMisterPi.
Having said that, seeing a product like this come out is amazing. Congrats!
fpgas really need native analogue output (or atleast an addon board that adds native analogue output). Since it finally gives us perfect "emulation", it also gives us the perfect real output for the authentic CRT experience.
I am hoping the FPGa growth will lead to CRT gaming growth
Can't wait. Getting very excited!
Muchas gracias, quiero adquirir uno. Esperando que salga a la venta. ❤
The name is my only complaint with this. It's seriously a baffling name choice, but otherwise it looks awesome!
I managed to snap up one of the Turbo Packs from the 2nd batch. Is the wireless adapter included, or was that a 1st batch exclusive? It doesn't look like it was part of the contents. Excited either way!
Great to see this project coming together :p Interesting to see that there's a fan but no need for a heat sink. Guess the heat is manageable with just that?
I'm looking forward to seeing how this turns out :) I'll probably be waiting for the future more consumer friendly version myself. Looking forward to seeing that and the handheld in the future =)
Awesome work Taki
I can't wait for batch 2
we love you Taki!!! thank you for all the work you and your team is doing
This is great, allready have a mister, but options are great and i might actually grab one of these….great stuff🍺
Still waiting to get one of these from you, they are always sold out and I can't seem to beat the BOTS at getting one. Is that situation going to improve soon? My kids really want to have one of these! Thanks for all your hard work. We have a 4 and 8 year old here waiting for availability! We want the mega pack!
A-M-A-Z-I-N-G!!!! Thank, Taki! Excellent job!
Thank you for such an excellent video and for demonstrating compatibility with MisterAddons IO digital board. Can you confirm the Mister Pi also works with the IO Analog pro board, the one with the Saturn AV port?
I like how people complain about you while you're out here actually doing stuff 😂
Taki, will you offer different accessories for MISTer Pi? We need a MISTer to JAMMA adapter so that we can plug it into our arcade cabinets that are JAMMA wired.
Already sold out. Can’t believe I missed it so fast.
Another drop this morning and it sold out in less than an hour. Guess if you want one the only way to get it will be paying a scalper 5x for it, and at that point it's no different than getting the old hardware.
Really disappointed and I hope they can make larger drops.
@@jessebeard4178 yeah I overslept this morning and was super bummed to see the 2nd drop was already sold out with no date given for the next batch
i dont get how its a pi when it a cyclone chip? is this like when apple released ipod every one whent I crazy i steam iron i toastie maker? i thought for a pi it had to use a raspberry pi at its core ?
and it way more expensive than a pi board
Can't wait to see the amoled handheld.
i like the master system inspired packaging
Great assembly guide!
Amazing work! Just wondering why the Mister Pi negotiated 9V from the PD power supply when the power supply also offered 5V 3A? (15 min 20 sec). Thanks
Excited for the launch 🙌
This is super amazing, Looking forward to all the up coming release. Just one Complaint, where Can I get a Metal case for this? Or at least CAD shows where all yhe ports are located, so I can design my own 3D print Case for it for the time being? Keep Up the good work!
That thing is a Pi-scream Sandwich if Iv'e ever seen one.
Congrats on the launch. Tried to get one in batch 1 and failed miserably...clearly I need to enter my card details in less than 30sec to stand a chance 😂
I'm planning to use this primarily with my CRT TV. Does this have the ability to output 240p/480i 15khz resolutions?
Ok I desperately need this.
Thank you so much Taki
Congratulations on the launch.. This looks pretty much the same as the de10 setup.
What a hero
all this is missing is a snazzy case to make it look pretty!
Very excited to get my hands on one of these great stuff Taki!
22:30 YOU EVEN PICKED THE BEST GAME OF ALL!!! KICKA$$!
dope, great video and presentation. might get a second setup :)
I love how there is no USB bridge between the hub and the mainboard.
You rock!
Would be amazing if you can make the boards in other colors.
1st week of October came and went and there wasnt any notice of being back in stock.
I thought i signed up for the newsletter too and wasnt made aware of any restocking...
I would love to buy this but doesnt seem like that will happen anytime soon...
Hey Taki, I think you should have made it clear that this was a clone of the typical de10 nano MiSTER. As a viewer who has a MiSTER, but has not been following the scene, I didn't know from this video what it was; I had to look it up to see if it was some sort of cut back version lacking features or compatibility.
I think it would behoove you to make it clear in the intro that this is not the case, particularly because Pi in the name of many similar devices directly imply that the guts are based off of the Raspberry Pi.
So excited for the release!
Can't wait for this to arrive. MiSTER at an affordable price at last.
Looking forward to getting one! Curious to see how it stacks up.
Are there more of these coming back in stock? I just found out about this at what looks to be a couple months too late.
Looking forward to the launch date.
i got this a few days ago. but i haven't gotten the ram pack (nothing to do with taki I bought the board and the ram seperately and there was flooding so the package with the ram got delayed) ive done the setup but im not sure what cores work without the expansion pack. so im waiting to try it out when i get it delivered on monday. :) super happy with this product I am working on making it a portable :D
I WAS RIGHT THERE AND THE WEBSITE GLITCHED OUT ON ME. I MISSED IT BECAUSE OF AN ERROR, GOD DANG IT
Update: I HAVE IT!!!!!
Wait... i might have missed something but is this affiliated with like raspberry pi? or is it just called that because of the size and shape?
also out of curiosity, what was the inspiration for this product? just to get more people into fpga dev? Or is this meant primarily just to be a smaller option for diy handheld retro emulation?
When is the launch of mister pi fpga? It's awesome!!! Thanks Taki
Nice Raspberry Pi
I was hitting F5 for both launch windows on the website and never even saw the button change from SOLD OUT. I never even got a chance. This is Analog Pocket all over again.
If you spam f5, your browser won't actually reload the page, it will just show you a cached version. You have to press Ctrl+f5 to bypass the cache. This is what I did, and I bought my mister pi just fine.
Nice that this only costs half the price of the original mister it's just sad that there is no stock
As a complete noob on this and having watched the whole video, I still dont know the benefits of this board over an emulation device, there should be but I dont know them
That would be a topic for something closer to a review video.
Software emulation vs hardware emulation. It’s one step closer to the using the actual hardware and software. Software emulation needs to translate everything to run in modern hardware. Hardware emulation mimics the actual hardware, so nothing needs to be translated. Can a software emulation feel as good as hardware emulation, possibly, but often the hardware emulation feels closer to the real thing.
Accuracy -- the timing on the FPGA is either identical or near identical to the real thing.
some benefits
- with a snac adaptor you can plug in your real controllers with zero latency
- this includes your real n64 controller's gameboy expansion pack, hook up your real pokemon game to pokemon stadium e.g.
- or hook up a real gameboy to your device with an actual link cable and trade with it
- it does 0 latency analogue out, and hdmi out
- the audio and video is perfectly synced because it doesn't run on a buffer, the chips are all simulated in parallel like in a real console
- crt effects work, like visual effects that run by abusing the real time of an electron gun moving in a crt to make visual effects, or lightguns
- you can overclock the cpu. like run an n64 or psx on "real" hardware just overclocked without changing the simulation speed
- it looks, sounds and feels perfect
This is awesome! Please also create Jamma hat as well
I'm so confused. So is this an FPGA or does it require a Raspberry Pi? What a very strange choice for naming. Incredibly confusing.
FPGA 😂
It has pi in the name because it uses python based code, same as a raspberry pi
Definitely still confusing, but it is definitely fpga