Changing the front pads and rotors on a 2018 Chrysler Pacifica.
ฝัง
- เผยแพร่เมื่อ 12 มิ.ย. 2020
- Changing the front pads and rotors on a 2018
Chrysler Pacifica .
⬇️ Show your support here ⬇️
Patreon
/ kylehallwoodworker
💥 Purchase my work here 💥
etsy.me/2maxH5o
Amazon links
1/2 ratchet set amzn.to/2Amr6Od
Deep sockets amzn.to/2UFNeKg
Torque wrench amzn.to/2zsw7Eg
Jack amzn.to/37rxaAU
Jack stand amzn.to/2MRm3rH
Wire brush amzn.to/2Yz2FF1
Pry bars amzn.to/3fk319p
Brake tool amzn.to/3e0NHOD
Go pro hero 7 black amzn.to/2MAdhOD
Follow me on social media .
Facebook: / hallsstickfurnitureand...
Instagram pBx2tF7wAG...
Pinterest: pin.it/hefrbwprarawus
Check out my Website
www.hallsstickfurniture.com/
Email
Halls.rusticcreations@yahoo.com
free music from TH-cam
This channel is intended to encourage, entertain and help advance your artistic abilities. Go and create some cool stuff !
Disclaimer- Do not solely rely on the safety, techniques and information I share / display in this channel. Make sure to do your own research and take proper safety cautions at all times . Working with tools and heavy items can be dangerous !
Your safety is in YOUR hands !
Due to the tools used and topics of these videos this content is intended for users 18+ of age .
Disclaimer: This video and description contain affiliate links, this means that if you click one of the links and make a purchase , I will receive a small commission . This will help support and grow my channel
![เบิ้ล ปทุมราช - อ้ายกินดอง น้องลาบงัว ft. สแน็ก อัจฉรีย์ [OFFICIAL MV]](http://i.ytimg.com/vi/-OK--KaSPcI/mqdefault.jpg)
i got my weekend project for my wife’s van and this made life a lot easier. thanks again kyle.
Pads just started grinding on our 2018 (about 110k miles), so I’m picking up pads and doing them in the morning. This is an excellent video.
Thank you very much for making this video. It gives us a pretty good insight to what we're about to get into. And especially you named all the parts and the size wrenches that will need. That was very important. And The Thing about the brakes was great too. So I really do appreciate tyes and I just want to thank you.
It's easier to work on these if you turn the wheel all the way (to the right for this side). This enhances access to the bolts. I also thread on a lug nut to hold the rotor in place while assembling the new parts. You should also brush the face of the hub assembly prior to installing the rotor as entrapped debris can cause pulsations. I always change the SS slides too. Hope this helps.
I always appreciate a good instructional video for the simple DIY guy. I strongly recommend you use a jack stand to take the weight and a hydraulic jack as a back up.
Nice work, Sir!
Thanks for the help on this
Wow! Both inner rotors looked like that - Scary. Probably due to the salt on the roads. Around me (NY) they over salted the roads the last two years.
Thanks very good video
Caliper bracket is the word you're looking for.
Perfect...thanks for the vids!!
Our pacifica has 110k miles and original brakes. I am replacing them now but they really aren't that bad. The rotors are warped pretty bad but no pitting .
Nice video brother thank you
I’ve turned too many bolts from righty-tighty into righty-loosey in my life, so I like to look up torque specs, especially brakes, suspension and anything aluminum.
I found out that you can put the jack stand right under the tow hook front left (passenger side). Pacifica is definitely limited where you can put the jack stand with floor jack.
Where did you get the brakes from/how much?
the reason you couldnt find a video ia probably because its very standard, the rear is different because of the ebrake issue, nontheless, comments in this video answered my question, no ebrake issue with front brakes ill check this video back qhen qe are ready for rears
When you replace the front brake pads and rotors do you have to de-activate the parking brake? Thanks
Do you have a fairly affordable torque wrench that you would recommend?
Did you crack the bleaders to push the pistons in