I have a p0421 code I know what it is it’s my cat converter but I have no check engine light how could I fix that? New cluster? I replaced the computer
Did not throw codes on dash at all, done any number of times 1-6xs key on/off, same results. Engine and Lighting Bolt are only lite up, approximately 30 seconds Lighting Bolt shuts and Engine Light is Flashing multiple times, then stays on solid again.....I have a refurbished computer-plug and go, as shop wrecked original and said some of it was fried. But had none if the issues I have now prior to this refurbished computer, O2 Censors-2 Changed out as it was throwing them, Crankshaft Position Censor changed as it said it needed it, has a Misfire on 5th Cylinder with open circuit, pissing out Fuel profusely from Exhaust, doesn't want to idle and run at times and floods itself out. Without changing the Fuel Injector or changing out anything, how can I get the Misfire on the 5th Cylender to close and not stay open, so it stops pushing Fuel out exhaust?
Did you find the problem? I'm going to mention something that will make me sound like the dumbest dopefeind to wake up in the late afternoon, itching, yawning, and pouring sweat, but, is your battery, and cables in really good shape? How the fuck could the battery have anything to do with any of them problems? I can't imagine in what universe it would make any sense, but I have fixed in one fail swoop, my camshaft position sensor problem, my cranckshft position sensors problems, my fuel evaporative problem, my pre, and post O2 sensors, and a truck that would t shift past 4th gear, just by putting a good quality, brand new battery, of the proper size, and ditching my high quality clamps, and going back to the cheap thin steel straps like what was on when Dodge thought that thin steel hose clamps would be better that solid lead clamps, and i guess they were absolutely correct. Cause all my troubles went away upon doing this. Oh!! I also had to replace the 160°T stat, and put one back in that runs at 204° i took that bitch out when I got the truck many years ago. Cooler is better is what I've always thought. But apparently not in this truck. That was 2 years ago. Now, I didnt have any dead cylinders, and I am in no way whatsoever saying this is your problem, I'm just saying i replaced al.ost all the shit the code reader told me too, and none of it had any effect, and then a buddy recommended I change the battery, and close back to stock. I asked WTF does that have to do with the cost of head downtown? He shrugged. Well, I tried everything else, so i went And bought a $150 battery, and so.e $10 clamps, reset the computer, and 2 years later, I'm still standing better than I ever been. Good luck, and i truly hope your problem is minor. Go forth, and multiply. Thank you most kindly.
Man this whole time ive had this truck ive never knew that trick!! Thanks man this was helpful
No problem 👍
Check engine light was on. My code reader couldn't find any codes. This trick worked perfectly. Thank you.
Awesome!
Going to try this tomorrow. thanks
My code reader told me that there were no error codes stored yet this trick said otherwise. Thanks
Im glad it worked out for you!
Worked on son's 2005 ram 1500. Neat trick.
Thanks for sharing. Im glad you enjoyed the video.
Thanks homeboy. 🍺 learn something new today
You bet
Nice, this only works on trucks with ignition switches
Thank you it does work on my ram 1500.
2004 dodge ram 1500, check engine light is on but when I do the trick it instantly says done and an empty screen with no code appears
Mine didn't even give a code or any other indication
What’d u do for the 128 code? Thermostat?
I have the exact same codes as you. What was your fix?
I have a p0421 code I know what it is it’s my cat converter but I have no check engine light how could I fix that? New cluster? I replaced the computer
I have code 81 and 64 and also b7/b8 is this normal 04 ram 2500 v8
Will this trick work on a 2000 Dodge ram 1500 V8 5.2 sport?
Hello thanks for watching. It work for me. Please let us know if it works out for you.
Did not throw codes on dash at all, done any number of times 1-6xs key on/off, same results. Engine and Lighting Bolt are only lite up, approximately 30 seconds Lighting Bolt shuts and Engine Light is Flashing multiple times, then stays on solid again.....I have a refurbished computer-plug and go, as shop wrecked original and said some of it was fried. But had none if the issues I have now prior to this refurbished computer, O2 Censors-2 Changed out as it was throwing them, Crankshaft Position Censor changed as it said it needed it, has a Misfire on 5th Cylinder with open circuit, pissing out Fuel profusely from Exhaust, doesn't want to idle and run at times and floods itself out. Without changing the Fuel Injector or changing out anything, how can I get the Misfire on the 5th Cylender to close and not stay open, so it stops pushing Fuel out exhaust?
2003-2004 Dodge Ram Hemi 5.7 1500
Did you find the problem? I'm going to mention something that will make me sound like the dumbest dopefeind to wake up in the late afternoon, itching, yawning, and pouring sweat, but, is your battery, and cables in really good shape? How the fuck could the battery have anything to do with any of them problems? I can't imagine in what universe it would make any sense, but I have fixed in one fail swoop, my camshaft position sensor problem, my cranckshft position sensors problems, my fuel evaporative problem, my pre, and post O2 sensors, and a truck that would t shift past 4th gear, just by putting a good quality, brand new battery, of the proper size, and ditching my high quality clamps, and going back to the cheap thin steel straps like what was on when Dodge thought that thin steel hose clamps would be better that solid lead clamps, and i guess they were absolutely correct. Cause all my troubles went away upon doing this. Oh!! I also had to replace the 160°T stat, and put one back in that runs at 204° i took that bitch out when I got the truck many years ago. Cooler is better is what I've always thought. But apparently not in this truck. That was 2 years ago. Now, I didnt have any dead cylinders, and I am in no way whatsoever saying this is your problem, I'm just saying i replaced al.ost all the shit the code reader told me too, and none of it had any effect, and then a buddy recommended I change the battery, and close back to stock. I asked WTF does that have to do with the cost of head downtown? He shrugged. Well, I tried everything else, so i went And bought a $150 battery, and so.e $10 clamps, reset the computer, and 2 years later, I'm still standing better than I ever been. Good luck, and i truly hope your problem is minor. Go forth, and multiply. Thank you most kindly.
If theres no check engine light on will different codes come up for different things?
Hello thanks for watching. Only if light is on.
Do you know anything about a code c06
I couldnt get it to work on my 2004 ram 1500 any help is appreciated
Jace Haar did you get it to work? It won’t read in my 2004 ram 1500
Jace Haar probably no codes
mine has no codes after multiple attempts of this trick showed in the video. will update once i’ve figured out why(if i do)
Thanks for sharing worked on my 2006 unfortunately 7 codes popped up lol 😮
Awesome to hear! Best of luck!
👍 Thank you for watching.
Strange. Didn’t work on my 2008
Doesn't work on my 06 1500
Didn’t work on my 99 2500 Cummins
Didn’t work on my 2007