He is using 2 hushpower mufflers by flowmaster. They're called hp2. They're 18" long with the casing being 12" and the rest is the tube. This is the part number 12412304. They're the ones with 2.25" inlet and outlet. He also took the fiber glass from inside the muffler to make it louder. He also has an X pipe which you can get anywhere as long as it's 2.25". I have the same set up after speaking with him a while ago. I also upgraded my tips and it looks and sounds awesome.
Carlos Tamayo the mufflers were about 140 a piece so about 280. The tips I have were 50 each on summit racing. The X pipe I got from amazon which was only about 25. I believe the install with the tubing and all was about 150. that'll depend on the shop you go to. Roughly around 550. Way cheaper than a custom exhaust and I love how mine sounds. The sweet spot for this engines is high in the RPMs around 4k
Its gotta be tuned my 3.8 mustang would only rev to 4200 rpm when sitting still in neutral I tuned it and now i can rev to 5100 and my rolling revlimiter is 6200 factory was 5400
You can rev past it by putting the car in reverse electronically but not physically by slightly pulling the knob till it says reverse but you don’t hear the gear kick in.
I have answered the same questions a couple times on here if people just read the comments. I have the same set up after speaking to the guy who used to own this car. He used to own it..... took off all of the performance parts to trade it in. He was also running 12 second 1/4 mile using nitrous.
I have an 08 CTS4 with the 3.6L direct inject motor. Would I get a similar sound out of my 3.6 with a muffler swap only? I don't want a "raspy" sound. I had a 04 jeep grand cherokee with the HO V8 in the past and it sounded great with only a flow master super 44 muffler and 3.5 in tip
I was told by my Cadillac dealer that changing the mufflers would void warranty. Heading to dealership tomorrow for first oil change and will inquire once again.
I installed it all then put it back to stock the day after. It was unreal how much the interior of the car vibrated. Like another person said, from outside the car: it sounded like a Ferrari going down the street That said, from inside the car it made me appreciate the stock exhaust
I tried adding j pipes but it didn’t quiet it down. Let me know if you sort it out so it doesn’t resonate so intense and I may try it out! Thank u bro!
+Jeremy P Morgan because I talked to him and I got the same set up now. except I got bigger tips on mine. I do love the sound. The only thing is that he pulled the fiberglass pack out of the muffler to make it loud. that high rev sound is music to my ears. by the way he no longer has this car.
Hey looking to put mufflers on my ATS 3.6L just wondering what your setup is? so 2 flowmaster HP mufflers and an x pipe replacing the resonator its added to the stock exhaust?
He is using 2 hushpower mufflers by flowmaster. They're called hp2. They're 18" long with the casing being 12" and the rest is the tube. This is the part number
12412304. They're the ones with 2.25" inlet and outlet. He also took the fiber glass from inside the muffler to make it louder. He also has an X pipe which you can get anywhere as long as it's 2.25". I have the same set up after speaking with him a while ago. I also upgraded my tips and it looks and sounds awesome.
Idontcare well that was easy lmao
how much horsepower does it add and what was the cost of everything?
Carlos Tamayo the mufflers were about 140 a piece so about 280. The tips I have were 50 each on summit racing. The X pipe I got from amazon which was only about 25. I believe the install with the tubing and all was about 150. that'll depend on the shop you go to. Roughly around 550. Way cheaper than a custom exhaust and I love how mine sounds. The sweet spot for this engines is high in the RPMs around 4k
Idontcare dude thank you! could you upload a video or send one over through whatsapp?
Idontcare and would you give an estimate of how much horsepower this set up will add?
which x pipe exactly? and will this void warranty?
I love this... Sounds good
nice sounds like dual series 10
I keep coming back to this video, I swear he’s revving past the 3k Park/Neutral Rev Limiter..
RPMike I agree, maybe his is tuned?
Its gotta be tuned my 3.8 mustang would only rev to 4200 rpm when sitting still in neutral I tuned it and now i can rev to 5100 and my rolling revlimiter is 6200 factory was 5400
You can rev past it by putting the car in reverse electronically but not physically by slightly pulling the knob till it says reverse but you don’t hear the gear kick in.
That sounds fricking amazing!!!
sounds like a Ferrari at higher rpm
I have answered the same questions a couple times on here if people just read the comments. I have the same set up after speaking to the guy who used to own this car. He used to own it..... took off all of the performance parts to trade it in. He was also running 12 second 1/4 mile using nitrous.
Any link for direct purchase please?
I was running 11.60’s in the 1/4 lol
@@thomasmenees3997 you were spraying if I remember correctly
What is your setup? Sounds great!
I have an 08 CTS4 with the 3.6L direct inject motor. Would I get a similar sound out of my 3.6 with a muffler swap only? I don't want a "raspy" sound. I had a 04 jeep grand cherokee with the HO V8 in the past and it sounded great with only a flow master super 44 muffler and 3.5 in tip
Omg i just bought one!!! Tell me more!!!! Please!!!!
I live in pinellas, where did you get this done and how much was it?
very nice sound!!! model???
2013 ATS4 3.6
I was told by my Cadillac dealer that changing the mufflers would void warranty. Heading to dealership tomorrow for first oil change and will inquire once again.
What did they say?
Your dealer is a moron
Was resonator replaced with the x pipe?
sounds ok.......
witch flowmaster are you using
i just picked up a 3.6 ATS today... couple questions... is this mufflers only or an entire cat back style system? bolt-on or custom?
Flowmaster sells a cat back , so I assume that's what it is. I,just picked up a 3.6 also
Would this pass smog?
What is the model number? A link would be so helpful
Kinda sound like a VQ V6 with a aftermarket setup
For real, when I first heard a 3.6 revving... I thought... This is close to a vq sound.
Please, can someone provide me with an online link for this mufflers
yep
whats the link
can someone provide the link???
Driving clip ?
Was there any drone from 2k-3k cruising speeds after install of the hp2s and x pipe??
I have this set up and yeah it’s bad
I installed it all then put it back to stock the day after. It was unreal how much the interior of the car vibrated.
Like another person said, from outside the car: it sounded like a Ferrari going down the street
That said, from inside the car it made me appreciate the stock exhaust
@@dchachacha5663 I don’t think il go stock, might add a small resonator to dampen the cabin noise a bit
I tried adding j pipes but it didn’t quiet it down. Let me know if you sort it out so it doesn’t resonate so intense and I may try it out! Thank u bro!
Drone?
Is that a catback?
what system is this part number cat back
He is using the hush power by flowmaster mufflers with magnaflow xpipe.
+Jeremy P Morgan because I talked to him and I got the same set up now. except I got bigger tips on mine. I do love the sound. The only thing is that he pulled the fiberglass pack out of the muffler to make it loud. that high rev sound is music to my ears. by the way he no longer has this car.
+Jeremy P Morgan No. It is not a magnaflow exhaust. It consists of 2 flowmaster HP mufflers and an X pipe. Nothing to do with magnaflow.
What size muffer is it? Could you please give us a part number?
So what muffles hes running?
Hey looking to put mufflers on my ATS 3.6L just wondering what your setup is? so 2 flowmaster HP mufflers and an x pipe replacing the resonator its added to the stock exhaust?
Mine only revs to 3500 and stops
How much horsepower will this car gain by adding that exhaust?
nUk380 0 lol it just moves the power and in the higher rpms
sounds like a old G35 coupe