Here I give you a run down of what I have done to my wife's maddog AKA chuckus. My IG @RIMAXI_RUCK Join FB page @CHUCKUSLIFE www.cajunmaddogs.com for bikes and parts www.theruckshop.com
The upgrades that you did on her bike is amazing, and I bet her bike runs beautiful. Keep the videos coming... I pray I find a shop to upgrade my bike...Keep on riding..
@@shanepalmer9345 most of it comes from the transmission i.e roller weights clutch, drive face, carburetor and a good tune. I used an a/ gauge ratio to dial in my carb works wonders
What brand are the grips? They look very clean. I'm still trying how to take the end caps of the grips off on the stock grips. The hex screw just spins like there's nothing there.
First off love the build so far. I have so many questions lol. I have a 2016 gen 4 and I've been wanting to do some mods but wasn't sure which ones work with the icebear. So did you have to do any mods to get the yoshi to fit. Second did you have to do anything special to get the wheels to fit. Lastly how did you mount your mikuni fuel pump like that I hate how mine connects to the plate under the seat. Thanks again and keep up the good work.
For the yoshi pipe it was a straight fit theres no mods needed for that. The rear wheels you do have to get a gy6 hub but thats not that expensive you can get them on any websites that sells gy6 wheels and for the mikuni fuel pump i just drilled a hole on the belly pan got a bolt and nut locktite and will not go any where..
Hey bro! Love what you did to your wife’s mad dog! I have a question, I got the gen 4 and I’m having an issue with the battery box vibrating like crazy during acceleration. Did you have this issue or know any tips to reduce it?
Do these breakdown a lot? Been thinking of getting one but i'm not a mechanic. I can fix some minor stuff or i can break the minor stuff and make it major. Got a friend that i think he might be able to fix but i don't want something that i'm going to have to have repaired 3-4 times a week
@@RimaxiRuck from 16- to $1800 is not bad and you don't have to worry about claiming damage good overseas. Does the engine or transmission has a warranty like a car?
Quick question bud on your rear hub are the hubs the same from monstergy6 of are they different. And also what was done for your rear wheel not to be hitting the shock
@davidtucker8086 if it's a 150cc any wheel that you buy most likely has the right offset for that size wheels. I just don't remember it exactly. But check the ruck shop or machine wheel website for they have the right wheels
I have a question on these if u get a 50cc one can u put a bigger motor like 171 or 180 Gy6 on it I found a couple in my area for cheap I’m really wanting to build one
@@RimaxiRuck yeah I think I’m going to wait for a deal on a ruckus cause I don’t wanna spend all that money not be able to make it work I’m sure I can have some tabs welded for a motor but I’d rather be sure it will fill fit before I start buying parts you got some sweet bike though
Hey I just bought same bike two month ago it was 2020 with 200 miles on it. Put about 400 miles on it since. Today I was riding starts fine rode fine. Was stopped at light and went to go and it wasn’t moving but was still on. Do you know what this is? Any help would be much appreciated!!
Great video, I have a question, on the gen 5, where is the fuel clock located? Suppose to have a switch to turn on and off and to reserve, but I can't find it anywhere and the manual only shows what it looks like. Any help would be appreciated
Your man you’re a good husband you take care of your wife some my argue is it better to build a bike a little better than your wife or just as good? that is the question that’s probably gonna be argued for centuries.
Is that a Chinese brand it looks exactly like a Honda ruckus what did they change to make it look different so it could sell without any lawsuits let me guess proprietary lightbulb? Either way it’s a cheaper frame I just disassemble all the Chinese parts and yard that shit.
The upgrades that you did on her bike is amazing, and I bet her bike runs beautiful. Keep the videos coming... I pray I find a shop to upgrade my bike...Keep on riding..
Thank you so much 🙏 i hope you find a shop if not theres tons of videos out there that'll help...
@@RimaxiRuck anyway you could gimme lost on what it takes to go faster for the mods you used?
List
@@shanepalmer9345 most of it comes from the transmission i.e roller weights clutch, drive face, carburetor and a good tune. I used an a/ gauge ratio to dial in my carb works wonders
I enjoyed the video very much you explain things Dead on that's what I've been looking for you have a new subscriber
Thank you for the support 🙏im glad you enjoyed the video!!!
Where did you get all your parts? Nice build man
Are the upgrades you did to your wife's bike the same parts as a ruckus or where do you order the upgrades from
Most of them fit when it comes to engine and wheels
Could you please respond let me know what hug you're using please
Keep the chuckus content coming. I just picked one up as well
Will do, enjoy the new ride 😎
I was wanting to order some parts how do I find the rock shop.
Theruckshop.com and cajunmaddogs.com
Nice Lindsey sterling in the background playing (:
What brand are the grips? They look very clean. I'm still trying how to take the end caps of the grips off on the stock grips. The hex screw just spins like there's nothing there.
First off love the build so far. I have so many questions lol. I have a 2016 gen 4 and I've been wanting to do some mods but wasn't sure which ones work with the icebear. So did you have to do any mods to get the yoshi to fit. Second did you have to do anything special to get the wheels to fit. Lastly how did you mount your mikuni fuel pump like that I hate how mine connects to the plate under the seat. Thanks again and keep up the good work.
For the yoshi pipe it was a straight fit theres no mods needed for that. The rear wheels you do have to get a gy6 hub but thats not that expensive you can get them on any websites that sells gy6 wheels and for the mikuni fuel pump i just drilled a hole on the belly pan got a bolt and nut locktite and will not go any where..
Did you have to modify the frame to fit Yoshimura exhaust.
Not at all it was plug and play
I am a bit envious of your garage look at all that spaced working with no outside interference don’t want to tell you you’re making too much noise.
Nice was thinking about getting one til I see it has zero storage. I need storage going to the store and all.
Hey bro! Love what you did to your wife’s mad dog! I have a question, I got the gen 4 and I’m having an issue with the battery box vibrating like crazy during acceleration. Did you have this issue or know any tips to reduce it?
Most of them vibrate especially if is the 150cc
Zip tie the battery down. It's just bouncing around
Do these breakdown a lot? Been thinking of getting one but i'm not a mechanic. I can fix some minor stuff or i can break the minor stuff and make it major. Got a friend that i think he might be able to fix but i don't want something that i'm going to have to have repaired 3-4 times a week
If u ever sell those please let me know
Smallenginevelocity has a meet up video with a sweet maddogg!!! It’s for sale I’ve heard.....
Ill check it out!!! Thanks
Anything you immediately have to change after you got the scooter I got one coming next week just wanna be prepared I got a gen 5 coming
1st thing id change is fuel lines fuel pump
I love the bike. Congratulations! What's the price before you did all the modification.
I think it was $1800 if i remember correctly
@@RimaxiRuck from 16- to $1800 is not bad and you don't have to worry about claiming damage good overseas. Does the engine or transmission has a warranty like a car?
No warranty unless it came damaged during freight
i cant find those side mirrors on Amazon. got a link?
www.amazon.com/dp/B075JDQFJV/ref=cm_sw_r_cp_apa_glt_fabc_WRJF1NCTF2QY7F8XCN22?_encoding=UTF8&psc=1
Ace
Quick question bud on your rear hub are the hubs the same from monstergy6 of are they different. And also what was done for your rear wheel not to be hitting the shock
I cant remember where the hub was from tbh but nothing had to be done for the rear shock it was just plug and play
Did you use a spring compressor on the rear spring to disassemble it for paint?
I did not i just cover the inside of it
@@RimaxiRuck Thank you!
What tail light is that? Can you post link?
I got that one from theruckshop.com
What size is rear wheel. Offset and bolt pattern?
12x8 5he bolt pattern is for a gy6
@@RimaxiRuck I have a gen 4 maddog. Trying to figure out offset so I can order.
@davidtucker8086 if it's a 150cc any wheel that you buy most likely has the right offset for that size wheels. I just don't remember it exactly. But check the ruck shop or machine wheel website for they have the right wheels
Do you have a link for the grips?
www.amazon.com/dp/B06Y3ZWG2W/ref=cm_sw_r_cp_apa_glt_fabc_SWWVJF38V6W46XP73JN5?_encoding=UTF8&psc=1
@@RimaxiRuck thank you sir..
I have a question on these if u get a 50cc one can u put a bigger motor like 171 or 180 Gy6 on it I found a couple in my area for cheap I’m really wanting to build one
Yes you can but keep in mind the engine mount on the 50cc is on the bottom and gy6 150cc on top so it wont be a direct swap
@@RimaxiRuck yeah I think I’m going to wait for a deal on a ruckus cause I don’t wanna spend all that money not be able to make it work I’m sure I can have some tabs welded for a motor but I’d rather be sure it will fill fit before I start buying parts you got some sweet bike though
what kind rear hub did u use? is it universal?
and where did u get them? i have maddog gen 5.
You can get them pretty much anywhere they sell wheels machine machines the ruck shop etc
can u link where did u get your carburetor kit? i wanna upgrade mine.
I think it was at theruckshop.com
Hey I just bought same bike two month ago it was 2020 with 200 miles on it. Put about 400 miles on it since. Today I was riding starts fine rode fine. Was stopped at light and went to go and it wasn’t moving but was still on. Do you know what this is? Any help would be much appreciated!!
Did the engine revved when given throttle? If it didnt might be the throttle cable and if it did cld be the belt or the clutch
Thanks for answering brother appreciate it. It revved but wasn’t moving
I'm trying to track down the mirrors on the maddog. Does anyone happen to know the name of them or where I can buy them?
I cant remember the link but ill look it up for u
@@RimaxiRuck Thank you sir I appreciate ya!
How much was your wheels
Cant remember i bought them from another person
Is that a 50cc
Both are 150cc
Can you do Engine mods for more power
Yes you can!! Tune is the 1st step unless you want to go bigger with the piston
Quick question, where did you get the yoshimura exhaust ? I would like to order one for mine 👊🏼
The ruck shop
Do Honda parts just bolt on?
Most of them some might need minor modifications
SWEET BIKE HOW MANY CC ?
150cc
@@RimaxiRuck THANKS BUDDY SWEET BIKES !!
@@raymondj8768 thanks brotha 🙏
Hub
get a better camera with better mic please
\
You have a link for the taillight ?
Theruckshop.com
Totally agree on Gen IV pick. In my opinion by far the best looking.
Transmission tune is crucial also air to fuel ratio
You have the link of the mirror?
www.amazon.com/dp/B075JDQFJV/ref=cm_sw_r_cp_apa_glc_fabc_VMD6TSW40BPCDXE47KJ2?_encoding=UTF8&psc=1
Great video, I have a question, on the gen 5, where is the fuel clock located? Suppose to have a switch to turn on and off and to reserve, but I can't find it anywhere and the manual only shows what it looks like. Any help would be appreciated
Thats the 1st time i hear about that, i have a gen 4 but im not sure if the gen 5 has it 🤔
Your man you’re a good husband you take care of your wife some my argue is it better to build a bike a little better than your wife or just as good? that is the question that’s probably gonna be argued for centuries.
Ive been thinking of getting an icebear maddogg but I been hesitant my goal would be to have it look similar to yours
Whats holding you up?
@@RimaxiRuck they are out of stock every where I look.
@@sanansa4567 have you checked cajun maddogs?
Is that a Chinese brand it looks exactly like a Honda ruckus what did they change to make it look different so it could sell without any lawsuits let me guess proprietary lightbulb? Either way it’s a cheaper frame I just disassemble all the Chinese parts and yard that shit.
I did a lot to it but you should have nonissues selling it as these are legal here
Nice scooter...!
Its come from china?
Yes that one is
nice rims i got the red one amazing bikes bro,not a real ruckus but you still cruise bro
Thanks 🙌 i appreciate it. Yeah both are fun i will be doing a video on the ruck soon stay tuned
What's the difference with this and the Honda Ruckus
main difference is the frame, maddog is from china and the ruck is japan better quality
Thanks very much
I want to get aftermarket wheels for my Maddog? Would that require me to also get new wheel hubs?
You make me want one of this, any estimate on How much to get it like it is.
Around 1500 between parts and misc. Depends on where you buy and what parts
@@RimaxiRuck Not too bad...does that price include the work or did you do mods yourself?
@@avee413 i did them my self the bike is easy to work on
Is your wife 150cc
It is
what size is you rims and tires? front and back?
12x8 140/70/12
@@RimaxiRuck thank you. what about the front??
When you ordered it how long did it take to ship to your house?
took about a month
@@RimaxiRuck why it took so long?
@@caidagreat2079 it came from thailand
Snap my bad i thought you were talking about something else the bike took about 2 weeks to get my bad