We have a senfeng laser raycus laser source and for some reason our lower protective lense has to be changed atleast once a day but it always seems to be small black or Grey looking dots
Hai Claire , whata smart and beautiful tutor . Questions : 1. How long average Life time of the consumable part (Lenses, Nozel) for Mildsteel T6, T8, T10mm. Fiber Laser m/c 3000W 2. Tks
Hey clara can you please solve my problem, we have 1.5 KW laser machine. I found a white spot in my lens today while cutting a 4mm sheet, but I had changed the lens just two days ago and the previous lens lasted for 1-2 months . But the sheet has junk .
Hi Clara. My Protective Lense bottom side black metal slugs shown And not remove it. So We need to replace lence or not. because slugs not Centre in Lense.
What is the reason for upper protective window has been damaged frequently? Small black spots and also moisture content will be found when upper lens damaged.
@@ClaraChai I have the same problem like Design Metaltec but I don't have moisture on the protective lens. I have disassembled the head twice to clean the lenses and optics. How can I solve it?
I cut 1,5mm thick carbon steel using air on a 1kW head. 2 days ago I tried to cut a 6mm thick carbon steel using Oxygen but I didn't change any parameters other than cutting speed. Today I switched back to cutting 1,5mm carbon steel with air but it doesn't cut through. Any idea what might have happened on the head?
@@ClaraChai but as per your experience which laser head is quality and which source of laser is well doing like Raycus and Max both are very much popular in China please guide us
I have a 3000W fiber laser cutting machine and when cutting 8mm or above the lens get black points very fast.. like 5-10 minutes cutting time.. I already tried many different pierce strategies but no success.
hi mam, this is Nagaraj FROM chennai, we used 2kw machine, when we do the marking the protective lens is black dot accured immediately. that problem wil come only marking time, how to resolve please guide me.
What is the reason the focusing lens heat? Because focusing lens high temperature indication time automatically laser is stop the cutting Can u solution?
I have problem of burning black point on the upper side of the second protective lens located between the lower protective window and the focussing lens. problem occurs after aproximativelly hour cutting. All other lenses are clean without any problem. Also nozzle centering is Ok. airvoredsure is ok. need your previous help if possible. if you share me your whatsup nbr, i can send you photos.
We have a senfeng laser raycus laser source and for some reason our lower protective lense has to be changed atleast once a day but it always seems to be small black or Grey looking dots
Is the gas okay?
What problems do protective lenses cause when cutting mild steel, that make us suspect that one of them is damaged?
I really like your videos and I would like to thank you for your effort
Thanks, that's a lot!
ty laddy for this training cource
Thanks for your effort, however do make a video on how to apply Global parameters on cypcut laser cutting machines, thank you.
WHY The laser ray appears diffused rather than pointed, FOR CA1530 LASER
Hai Claire , whata smart and beautiful tutor . Questions :
1. How long average Life time of the consumable part (Lenses, Nozel) for Mildsteel T6, T8, T10mm. Fiber Laser m/c 3000W
2. Tks
Then lifetime could be decided by many factors, parameters, gas, working conditions, skills, quality…
@@ClaraChai Tks for your response, let say all factors are normal, material,skill,...
@@berkah0146 We could not say that, no those factors, there will be no consumables.
Hey clara can you please solve my problem, we have 1.5 KW laser machine.
I found a white spot in my lens today while cutting a 4mm sheet, but I had changed the lens just two days ago and the previous lens lasted for 1-2 months . But the sheet has junk .
please check the gas clean and upper lens.
Have you ever seen the protective lens crack? Cutting with N2 on a 1500W source and two protective lens have chipped out of the side.
Did you throw away the lenses? You need to make it together and check which side is the damage source.
It has been the topside of the lens
@@paulb8264the upper lenses fine?
Hi Clara. My Protective Lense bottom side black metal slugs shown And not remove it. So We need to replace lence or not. because slugs not Centre in Lense.
and My 8mm SS cutting not perfect ... cutting inside more slugs.
You’d better to replace it.
@@dawaralis5430 th-cam.com/video/rr7dowl-IGg/w-d-xo.html
What is the reason for upper protective window has been damaged frequently?
Small black spots and also moisture content will be found when upper lens damaged.
Temperature between the room and chiller
@@ClaraChai I have the same problem like Design Metaltec but I don't have moisture on the protective lens. I have disassembled the head twice to clean the lenses and optics. How can I solve it?
@@claurino69 did you find anything on the lenses?
@@ClaraChai dust is not always found. I have taped the top of the head and the protective lens caps and have not improved
@@claurino69 It is better to have a thorough check
I cut 1,5mm thick carbon steel using air on a 1kW head. 2 days ago I tried to cut a 6mm thick carbon steel using Oxygen but I didn't change any parameters other than cutting speed. Today I switched back to cutting 1,5mm carbon steel with air but it doesn't cut through. Any idea what might have happened on the head?
Did you check your lenses?
@@ClaraChai Yes. Both of them are intact
@@thanostzanos3850 More lenses, including the collimating and focus.
@@ClaraChai No. Is it risky if I do it by myself? Do you think I need an expert to do it for me?
@@thanostzanos3850 I think you need to check all lenses first.
We have a machine 6 kw and always the upper protective lens 30*2 mm (upper side of the colimating lens) is burning. We cant find any solution till now
Is your laser cap fine?
Hi can u explain how to solve the small dia hole ovality issue
Thank you
Can u explain please
@@laser007 Sorry, no
In my software, layer parameters settings does not have this many options. 🤔
What software you have?
@@ClaraChai what's difference between 2000c and 2000s
@@dharmendrasuthar4342 later, I will upload a video which is focus on the models of CypCut.
At the time of purchasing laser cutting machine what we have to look into which companies parts best for laser cutting machine? Please guide us
I can not say which one is the best, you should take the most practical on your budget.
@@ClaraChai but as per your experience which laser head is quality and which source of laser is well doing like Raycus and Max both are very much popular in China please guide us
@@mjassociates887 I use most, personally, CypCut, Raytools, Max., Yaskawa…
Sir laser cutting machine is not working due to one focus light is red please healp me penta laser 3 kw
What is use of differt color layer use in sypcut???
You can check my video of CypCut
I have a 3000W fiber laser cutting machine and when cutting 8mm or above the lens get black points very fast.. like 5-10 minutes cutting time.. I already tried many different pierce strategies but no success.
Have you checked your gas and nozzle? What is the pierce parameters?
hi mam, this is Nagaraj FROM chennai, we used 2kw machine, when we do the marking the protective lens is black dot accured immediately.
that problem wil come only marking time, how to resolve please guide me.
The height for marking is set a little higher.
What is reson for cut taperness at cutting???
sorry, could not get enough information.
Hi Clara I have a problem with my laser cutter, it's burning the nozzle and the laser head becomes hot. Please assist
You can check my videos on nozzles, possibly the laser is not in center.
Me gusta ese vídeo donde va subtitulado en español
I have got water droplets on protective lens. Any idea why its their?? I use CO2 fiber laser.
Co2 or Fiber? They are different
@@ClaraChai i mean fiber laser cutting machine the gas i use i air.
@@harshitparekh8976 There is water or oil in your air.
What is the reason the focusing lens heat?
Because focusing lens high temperature indication time automatically laser is stop the cutting
Can u solution?
is the optical path okay?
Why does laser beam keeps getting off center in my machine? 🤔
Ceramic or QBH is loosed
Hi Carla how are you
Please the laser went off from my machine can you help me
What kind of going off?
Small black spots and also moisture content will be found when upper lens damaged.
request to give proper solution.
Check the temperature.
what reasons of no laser beam ?
Multiple
@@ClaraChai what this?
Reson for cutting hole ovality???
??
Hi
What is the hole size
hi hello I am laser operator I have problem my machine,the error is laser fiber interlock. what cause the alarm like that?
I am not sure I understand your problem, please share a picture of video, thank you.
@@ClaraChai do you have WhatsApp or massager I send too you on video about my machine trouble
@@modhel8929 +86-13335151833
@@modhel8929 +86-13335151833
I have problem of burning black point on the upper side of the second protective lens located between the lower protective window and the focussing lens. problem occurs after aproximativelly hour cutting. All other lenses are clean without any problem. Also nozzle centering is Ok. airvoredsure is ok. need your previous help if possible. if you share me your whatsup nbr, i can send you photos.
I think you need to check the specific cavity, you can check my video, the cutting head disassemble.
I need for solution pls help me
What solution?
laser not coming [laser pulls low alarm ] what is the reason?laser cutting only air
What laser source?
version 6.3 cypcut laser
cutting time only spark, stainless steel not cutting [ bcs100 ok lens ok centering ok]
@@sanilkumarsanal8353 what laser source not software.
@@sanilkumarsanal8353 You’d better to contact your supplier
Lensa protek cepat terjadi embun?? minta solusi
Ketauan embunya hrus lepas lensa ap ad indikator alarmnua?
Please hindi speak
Not in plan, sorry.