Cabon Steel Poor Cut | Fiber Laser Cutting | Problem and Solution

[@STAPEL.VECTOR]

Спасибо, Клара! Ваши советы просты и гениальны! Ваше видео - жемчужина для тех, кто, как и я, в начале пути лазерной резки.

[@ClaraChai]

Спасибо, очень рады, что помогают.

[@sadeeplakshan6274]

I am a cnc fiber laser operator and your videos very helpful ! Thanks for the knowledge 👌🙏👍

[@ClaraChai]

Thank you

[@ytpd115]

Thank you so much Clara for sharing such helpful information my laser cut is now cutting smooth. You gain a follower.

[@ClaraChai]

Thank you, I am glad it is useful for you.

[@Lea-ww9hf]

Hi Clara! First of all, you are the best! Finally I found someone how teach me how to get better cuts as a fiber laser operator!
I got a question for you, is the mirror edge the only "good quality" cut? Maybe you can make a video about what to consider a good quality cut.
Thank you for helping us!

[@ClaraChai]

It is a good idea, I will make it later, ☺️ thank you

[@amtamt5560]

Thank you for your help. Just starting in laser and learning a lot from you.

[@ClaraChai]

Great to hear!

[@oliverwoelfel2133]

Great video and helpful information. You are doing such a great job with the information you share here.

[@ClaraChai]

Thank you

[@ДмитрийС-я5ю]

Thanks. Very good presentation of information. Everything is precise, short and clear.

[@ClaraChai]

Thank you

[@christopherjoyce833]

I just found your channel. Thank you very much for sharing your knowledge

[@ClaraChai]

Thank you

[@FlipFlopPilot]

Great videos Clara, thank you. Do you have one like this for cutting aluminum? With tips and tricks?

[@ClaraChai]

Sorry but, I will keep it in mind, thank you.

[@kamalbansal4818]

Hi Clara, We have a 3KW Laser with RayCus Source, we are getting burr in 1.5MM Mild Steel while Cutting on Compressed Air.
We Tried with multiple parameters in the final best attempt the burr on the edge was like a fine thread which was getting removed by the finger .
Can you please help to fix this so that the complete burr is removed.
Speed 18M/Min
Focus -1
Pressure can’t be set manually
Power 100%

[@ClaraChai]

what parameters, what nozzle, what config of your compressor?

[@ahmadwaqqas688]

thanks Clara Chai , much needed videos😊

[@ClaraChai]

Glad you are 😊!

[@medjoui7600]

Hi Clara
I have question about flow rate of oxygen.
If we have raycus 1500w laser source and cutting 5 mm of mild steel by oxygen how much the flow rate of oxygen gas

[@ClaraChai]

What is your flow?

[@medjoui7600]

@@ClaraChai flow rate of oxygen gas
M3/h when cutting 5 mm of mild steel by 1500w raycus

[@ravenchua7663]

Hi, thank you for the information. Can you show how to set cutting for 6000kw from fibre laser cutting 16mm mild steel. Thank you

[@ClaraChai]

I could not offer you a precision parameters, what you can find is just for reference.

[@dalecollison791]

Great video. Can you do a video on galvanised steel cuts and main problems? Like too much dross on the bottom side.

[@ClaraChai]

Got it, I will do it later, thank you.

[@JBBowcutt]

Can you direct me to one of your videos in which the layer parameter setting "beam width" is explained?
Your videos are fantastic. I will most likely join soon.

[@ClaraChai]

Thank you, I think it could be the CypCut tutorials, about 8th episode or somewhere.

[@albertogtz7502]

Thanks a lot for the video. Amazing info.
Can you upload about parameters of air?

[@ClaraChai]

You can find parameters list in my channel

[@albertogtz7502]

Thanks, great info.
Congrats for your channel.

[@dapurnirmala1983]

Thank you so much for tips and Cut Again 😊

[@ClaraChai]

So welcome!😀

[@empremon]

Thanks! Very helpfull!

[@LucianoRSilva-ik2rk]

Hello Clara. Tks a for for share your knowledge.

[@ClaraChai]

Thank you

[@windchange-x9y]

Hi there, please share with me the handout or note pdf?

[@ClaraChai]

No such PDF.

[@DEARRAEDDEAR]

I have a 3000 watts laser and I’m trying to cut stainless steel with oxygen; any suggestions?

[@ClaraChai]

You can check my video, cutting parameters

[@DEARRAEDDEAR]

@@ClaraChai
Thanks for replying!
I enjoy watching your videos, you provide great tips.

[@rodmarbarretto1902]

Very helpful thank u

[@ClaraChai]

Thanks!

[@mohammadsuleman2548]

Dear , very helpful video Thanks,,,,, Pakistan

[@ClaraChai]

Thanks you

[@burakm.y.2411]

Çok iyi izah edilmiş. Teşekkür ederim.

[@peterpersson1967]

Make one about Aluminum too, thanks 😊

[@ClaraChai]

Noted

[@mornehickman3283]

thank you for helpng us

[@ClaraChai]

So 🤗 welcome

[@farishaidar1884]

Thanks you very very much❤

[@ClaraChai]

So welcome!

[@hamrounihamza3865]

thank you

[@ClaraChai]

Welcome!

[@prachyajaichuean9344]

thanks for help so much

[@bhupendrasaru3065]

Thnk you so much

[@ClaraChai]

So welcome!

[@parthpanchal1087]

SS 20mm N2 cutting 6KW Raycus source not proper cutting

[@ClaraChai]

Parameters?

[@shopondas3193]

hi

[@vijaypatil7244]

Remove not burr cricle dia

[@albertmushkolaj98]

thank you very much for these instructions .have any whatsapp no?

[@ClaraChai]

[phone]

[@Abhishek-rp2qs]

Thanks you

[@nedaleeeeeeeel]

Thank you

[@ClaraChai]

Welcome!

[@J181e]

Thank you

[@ClaraChai]

Welcome!