Hi Clara. Good videos. They influenced me to purchase a 3kw Maxphotonics source to replace an IPG unit. I got the laser to fire, it cuts 1 hole and cannot cut additional holes. Also, nozzle gets very hot. I used same configuration from my 2kw to try to cut too.
Hello Clara! Please explain to us the logic behind the choice of nozzles. Depending on what exactly do we choose a certain nozzle? How do we know we've chosen the wrong nozzle? Thanks!
Hi Clara, I wanted to know if it has happened to you that I cut at high speeds over 250mm/s and sometimes the center moves and the cut comes out wrong as if it were off center.
Hello I have one very important question please help whe bought a gf 1530jh Fibre laser machine golden laser and sometime whene I cutt it just like dry cut it's cutting but no sparks dry cut and the laser source alarm comes ons shutter closes and does not whant to open
hi carla, I have a problem with a 6000W laser machine with a Raytools BM114 type laser head. and cannot stably cut carbon steel plate above 14 mm thick. how much influence laser power with laser head type for good result?
hi, I cut in a common cut it is 5 hours program but the light is off and my machine is shut down what is the option to continue cutting as the last stop I know PT CONT. option is available but sometimes it doesn't active so give me a second option.
Hai madem, can you please explain how to set reference ponts for a nested pgm, and if I stop the cutting in the middle of the program, how can I come back to the starting point?, and how can I jump to the point where I click the stop button for resume the program? in MESSER system there is an option "jump to line number" but in Sypcut I am not aware about the process, can you please explain it?
Good evening. For my laser machine I always encounter overheating problem every 30mins. Im using air cutting only for 2mm. Power of my laser was 2kw. What should be the problem ? Thank you in advance.
Hi Clara. Good videos. They influenced me to purchase a 3kw Maxphotonics source to replace an IPG unit. I got the laser to fire, it cuts 1 hole and cannot cut additional holes. Also, nozzle gets very hot. I used same configuration from my 2kw to try to cut too.
you are doing good job and it's help all of us
😀Please tell your friends I am here, thank you.
Hello Clara! Please explain to us the logic behind the choice of nozzles. Depending on what exactly do we choose a certain nozzle? How do we know we've chosen the wrong nozzle? Thanks!
Could you find the answers from my nozzle videos?
Hi Clara, I wanted to know if it has happened to you that I cut at high speeds over 250mm/s and sometimes the center moves and the cut comes out wrong as if it were off center.
The center means the nozzle center? I think you could get something from membership videos.
My laser protective lens get burnt frequently
Hello I have one very important question please help whe bought a gf 1530jh Fibre laser machine golden laser and sometime whene I cutt it just like dry cut it's cutting but no sparks dry cut and the laser source alarm comes ons shutter closes and does not whant to open
I am not sure I could get all. Since it is important, have you tried to contact your supplier?
hi carla, I have a problem with a 6000W laser machine with a Raytools BM114 type laser head. and cannot stably cut carbon steel plate above 14 mm thick. how much influence laser power with laser head type for good result?
I think 14mm is not so thick for 6kw, probably it is parameter setting a or some other factors.
hi, I cut in a common cut it is 5 hours program but the light is off and my machine is shut down
what is the option to continue cutting as the last stop I know PT CONT. option is available but sometimes
it doesn't active so give me a second option.
'Task' could be a little helping.
Hai madem, can you please explain how to set reference ponts for a nested pgm, and if I stop the cutting in the middle of the program, how can I come back to the starting point?, and how can I jump to the point where I click the stop button for resume the program? in MESSER system there is an option "jump to line number" but in Sypcut I am not aware about the process, can you please explain it?
Good evening. For my laser machine I always encounter overheating problem every 30mins. Im using air cutting only for 2mm. Power of my laser was 2kw. What should be the problem ? Thank you in advance.
What kind of heating? Nozzle heating? If it is nozzle, you can check a short last month.
@@ClaraChai the cutting head itself
slt svp j'ai un problème la commande shutter non répond pas les autres commandes si et je peux procédé au découpe sans l'éteindre
L'obturateur n'a pas pu s'éteindre ?
My laser head is jumping while cutting. The nozzle does not touch the plate. It touch and jump what is the cause
Tell me more.
We are facing nozzle heating issue. Can you guide why
Which nozzle is best for cutting 2mm carbon steel with gas
1.2 or 1.5 double
Make One vedio on parameter Setting.
Could you just add a “please” to your sentence?
@@ClaraChai 👌👌
I want nozzle
+86-13335151833, please tell me your models.
Hii clara
My laser machine kullu karbutha
You doing great Job
Thank you
❤😊
Hello mam...
Привет из России. спасибо за канал
Glad you like it.
My laser head is jumping while cutting. The nozzle does not touch the plate. It touch and jump what is the cause
I could not reply you with so less info.