SCX24 M.D. TI CHEAT CODE CHASSIS BUILD: PART 1 - SUPER 8 AXLES, OIL FILLED L.T. SHOCKS, NSDRC RS100
ฝัง
- เผยแพร่เมื่อ 4 ส.ค. 2024
- Part 2 Here: • SCX24 M.D. TI CHEAT CO...
Finally getting this Titanium Cheat Code Chassis from Mazz Designs started. I have quite a few 'new to me' parts including: Little Guy Super 8 Axles, NSDRC RS100 Servo, RC Steve 710 custom Z-links, and a few other items...Enjoy!
(Don't forget, you can watch at faster speeds in "Settings" to save time!!)
Mazz Designs Cheat Code Chassis assembly tutorial: • Mazz Designs Cheat Cod...
0:00 - Intro/Parts Overview
2:42 - Super 8 Axles Components
4:12 - Axle Assemblies
4:24 - Link Overview
5:33 - Assembled Axles
8:49 - Chassis Overview/Assembly
10:49 - Motor Choices
13:03 - Motor Install/Test
15:10 - LT Oil Filled Shocks
18:11 - Servo Tray Shim
18:53 - Completed Overview
20:51 - ESC Tray/Clearance Issue
22:21 - Electronics/Battery-Look Ahead
23:27 - Conclusion/Final Thoughts
24:18 - Gallery - ยานยนต์และพาหนะ
![NONT TANONT - ดอกไม้ที่รอฝน (spring) - Reimagined [Live Session]](http://i.ytimg.com/vi/nY2PsFZFEOg/mqdefault.jpg)
I know this is an older post for you but I just got my cheat code. This series has been a HUGE help for. You have a fantastic channel please keep up the excellent work. It’s very helpful and easy to follow and learn.
Wow, thank you so much! This is the kind of comment that really hits home. I’m really glad these build videos helped you out. Stay tuned for some more cheat code builds as well…. Cheers brother!
Yes you helped. Thank you very much.
Good Deal! Make sure and check out part 2 as well.
Hello from southeast alaska badass build bro
Thanks brother!
Awesome.
Coming together nice 👍
Thanks bud!
Yeah but that bam4100 motor is such a beast I could not imagine it within an 18 tooth pinion that thing would literally jump off the ground it is already super fast with just a 12-2 but it has killer slow crawl amazing torque I believe it's the best motor on the market
Very well done video. Thank you for all the support!
No Problem... did you see the end part about ESC tray @20:52? Possibly a design tweak in order? Can't wait to get this rolling. Waiting on my tiny Galaxy 3S battery you recommend.
@@bcochener yes. It is only an issue when running shocks other than standard length. I already have a version drawn with it clearanced but never had a run of them made as it is only when compressing both sides at the same time and rarely will that happen if at all to full compression. Some have taken a sanding drum on a dremel and it's easy to make it look really nice.
Yeah, it could also be the uppers as well as the drive shaft hitting. I may dig into it with a Dremel, but it is so close I may not.
No way I'm putting that three s on there and rocking out
Oh, its loving it on 3S! No issues yet.
Great build bro. Super clean.👍🏻💯
Thanks bud!
Can’t wait to see the finished product!
Nice job Brian
Appreciate it brother!
I have to trim my plate as well but for link clearance. Looking forward to the final outcome
Yeah, with the uppers on the chassis link risers, they may be hitting as well as my drive shaft. At least it is basically at full uptravel. Not sure if I will modify it or not at this point...?
Another 🔥🔥🔥 build in the making Sir!!! Beautiful!!!
Thanks Mate!
Where would be the best place to get some links like that?
Awesome build so far! Looking forward to pt.2
Nanobeat maybe smaller but it's going to get a hell of a lot hotter too and that fan motor I haven't seen nothing that can really compete with it as far as staying pretty cool low-end torque high-end speed I have both of them I have the 1900 with a 16 tooth pinion on it and I have the 4100 with a 14-2 pinion on it I will be switching my 4102 like a 12-2
The Beast does run hot for sure. Loving the both Bams as well, just a good bit heavier. Really digging the new Nano Bam though... best of both worlds.
I like the separate spring retainer, nice n easy
Yeah, that’s super handy!
Looking awesome, I’ll be following to the end of this build have to see it done appreciate you sharing till next time
Thanks Andrew. I’m still waiting on a back ordered micro 3S battery to come in for this one. Soon hopefully!
Looks great so far🔥Excited to see the next part!!
I have the hot racing lt oil shocks, any tips on how to bleed them and fill them properly? I’m having trouble getting the shock to extend all the way out.
Sounds like you have some negative pressure.
I start filling them with them compressed and quickly let them extend as it fills them. Usually messy. I then cycle the shock slowly to get air bubbles out. Repeat the fill process 3-4 times until full when fully compressed. Air should be out. Then screw on the cap while keeping it compressed. Oil should squeeze out of the cap as you tighten due to the bladder ends on these. - this should leave you with smooth action without air bubbles.
If it feels crunchy, it likely is air bubbles inside. Rebleed them. (make sure it’s not just rubbing the spring on the outside though, making a noise.)
- if it won’t compress fully, too much oil. Rebleed.
You get the hang of it after you do a few. If it doesn’t feel smooth, try again.
Hey I just built a cheat code. Does wt micro make sliders to put one of their cabs on it?
Mazz does. He makes Willy and FJ sliders that fit the truck or cab versions.
What size links and driveshafts are you using?
I think the links were stretched 3mm in the front? It’s been a while. They were custom from RCSteve710. The driveshafts were JLU: @20:19
Late but how do you purchase links from rc steve?
A friend gave me his contact, but I believe he is on Facebook… I am not. He has a YT channel as well, not sure if you can get his attention that way, or if he has a contact email there.
Good job
🥰🤩💥💯👍👏👏👏
Another great build Brian! I am slowly working through your videos. Do you have a link where I can pick up the Nick Albin mount? I have scoured the interwebs and came up empty.
Thank you! As far as I know, you’d have to get it direct from Nick. Mofo doesn’t carry them anymore since he has his own black aluminum mount now.
@@bcochener thank you! What is nicks contact info?
@@payneja no idea…
Does this require custom links or can you use any stock or aftermarket links?
Any. C10/JLU/Bronco would work well. These are just a bit stretched from that.
Love your builds, Akers has a sweet LCG chassis I would love to c you do something with!
Thanks bud! I have seen those, one is a chopped comp style stubby!
I also like the U rock buggy kit they have. So many good options, so little time… before the next new thing is released.
@@bcochener I know I can’t keep up!
Brian, have you run the 4100kv BAM motor yet. Just fair warning, it is fast, too fast
Not yet. I have always been planning to pair that with Mofos portals since they are gear reducted.
Not sure that is enough. I haven't ran my 1900kv yet but I'll let you know. In the furitek Rampart axles, it just breaks itself with the 4100kv
@@DoubleADay WOW! Don’t want that. I’m happy I stuck with the Nano for this build.
Nice looking build - I was wondering about the Super 8 axles. I'm not a fan of plastic housings, but that stretch is impressive. Just curious about your choice to use a plastic spur - creating a weak point? Have you ever stripped a spur due to binding up the tires?
The metal spur I had on hand wouldn't fit this HR transmission shaft. I have all my Nano Beasts on plastic spurs I think though. They are quieter. Haven't stripped any yet, but did sheer a dogbone axle end off with a Nano Beast/3S on my 6x6 by hanging up the tire.
@@bcochener :O
What trans combo is that?
HR Overdrive trans.
Thank you! Also where could I get the silver motor mount
@@lusto808 Not sure. Maybe Nick Albin himself. Mofo no longer sells them and makes his own now (black aluminum).
Can’t wait to see how you setup your electronics. Been waiting for a day that you made a build using an aftermarket chassis with all the other aftermarket parts 😂🙌🏽