You can purchase a replacement battery door/back cover which comes with the adhesive tape pre installed like this one: www.ebay.com/itm/276051222709 or you can use B-7000 glue but better to use the battery door that comes with pre installed adhesive. I can't seem to find the adhesive strip sold alone for this phone. As for the adhesive remover here is the link: www.ifixit.com/products/ifixit-adhesive-remover?variant=39915173740647
There is some issue in my F62 phone. May be malfunction in my motherboard but I want my datas & files anyway. Can I remove my SDcard (or the hardisk where all the datas are collected)from the motherboard , so that I can fix it in my new F62 phone.
Thank you very much for uploading this video because i owned this mobile F62... But faced problem by taking this... small small dirts are inserted into 2 cameras : 12 megapixel and 64 megapixel cameras.. I bought this F62 from india officially ... But i am Bangladeshi
My f62 phone dropped and display is perfectly fine but touch is gone! Not working at all .. i want to know if we can repair digitizer of this model or get it replaced without replacing the whole screen . Pl reply
No you would need to replace the screen as well. Only factories with special tools and machines can replace just the touch digitizer properly. Also you can take the phone apart and make sure the cable didn't come loose or disconnect and reconnect it to see if it will fix your problem.
When I tap on the centre back side of my F62 it feels like there is hollow inside, it only feels when I tap on the centre of the back side, is it any problem with the device and should I go to the service centre to check this?
When I tap on the top and bottom of the back side i.e., near the camera module and on the Samsung logo on the back side, it feels like something is inside but on the centre part it feels like hollow inside
It's normal. The center of the back has a slight gap between the battery and backplate and the top and bottom of the back have the plastic covers covering the board and sub board so that is why it sounds like that.
@@PBKreviews but some days ago it fell from my desk and got hit on the top of my bottle, the centre of the back of my phone got directly hit on the bottle cap, is it ok? Or should I once check as that hit can cause any damage inside the phone?
You can check ebay or other sites, here is a link (m62 should be same as f62): www.ebay.com/itm/403748543978?hash=item5e0149ddea:g:yKIAAOSwRvFivt93&amdata=enc%3AAQAHAAAAoEToC9twciZxtxwmdoZGkCEO%2BNbyh%2B0oB2QISV6qhLaQhX1eyKsirhRGELcJOvcILgTjAakRCZDB%2F%2FZ5x0Wnk0Mkq0d0lL7037jDVFR6ZKrKrDTX8HVeKgz0tvkXlvuUtgDdZYzaCA4Wc25B0EaRWtlsmVmewcafqkLRHB6NBDoTgYvIM4f%2BNr5eFt7k%2FMKO%2BqkteIhDplP1vYpwP%2BANLdQ%3D%7Ctkp%3ABk9SR4L-ke7lYA
Can you tell me if those flex antemna cables on the frame are the same or similar to another model? I damaged all three of them and cant find a replacement for M62
My Samsung M62 got in water, after I let it dry on its own for a few days, then I turned it on again, the fhone is on but only the light is on..the LCD doesn't come out anything just the light is on..is it only the LCD that needs to be changed ?
Not sure, no way to know until you try a new screen. But your best bet is to take it apart and not try to use it like that because it will short the main board or other parts. You need to disconnect the battery, dry out any water inside, brush off corrosion on chips and connectors and then see if the phone will work.
This phone doesn't have good cooling mechanism as frame is plastic. I think someone with enough tools can make a metal frame and see if cooling goes well and phone may perform like Galaxy note 10. That 2nd back thin cover with nfc antenna, if it has good heat conductivity it will give good performance. Blend of plastic and copper also good
It's not the best cooling but isn't too bad either. Has a good amount of graphite/graphene in the phone to transfer heat. There is a layer of graphite under the motherboard as well as graphite padding on the board, and graphene film on the back housing. But yea cooling can be better with additional measures but this phones price and purpose was not meant for it to be on a high end level.
Does anyone know where to get a hard case for this thing? Amazon stuff all feels way too cheap and sketchy and I can't afford to break this thing too quickly
will reduce the weight a little bit but will cut your battery life down by half also. Plus you would need to find a battery with the same connector and cable length to work.
Sir my phone (F62) is charging for 10 seconds and then automatically gets disconnected ,is there any problem with flex cable as sub board is not damaged?
@@faizanchanda6961 My F62 suddenly stopped and turned off..when taken to service centre today they told that mother board is dead....dont know wat to do...can we retrieve data from Dead motherboard....dont know how to fix this its very hard of mobile data is lost....Dont know how to handle this
Hey my samsung f62 sim tray is stucked and can't able to eject by pin. Please it in warranty and i can return the product. But I need to take out my sim and SD cards out Please help me to solve the problem
The only way to be able to remove it would be to take apart the phone and try to internally but there is the chance of damaging the sim reader and also taking it apart would void your warranty. You can try contacting samsung and let them know your sim is stuck and wont come out and see if they can do it for you and return your sim and memory card.
Here is a link for the same battery (which is used in multiple model phones): www.ebay.com/itm/373441493555?_trkparms=ispr%3D1&hash=item56f2d8fa33:g:TaEAAOSwBv9gEWyv&amdata=enc%3AAQAGAAACkPYe5NmHp%252B2JMhMi7yxGiTJkPrKr5t53CooMSQt2orsSafTQYbq3L7RBVAMi0K9cw%252BUrsX6QGln7jOtgWMHy5PUPefCf%252BhiXVI%252BVr31WYRlbHSEjdNGstmHqI%252Ftkbx1BiJ6vo3qhaZkM7%252FsxUzjw4FQPk8nxaZsorLgvy3gSaKJmobFWBCzDQhJ1Cb%252FSprRKhElxmELIUBtZPPELvfe0ND9EpfRnexe2vqdhKdXUUbziT6w1hN9ksKLlMbsdS8g1e6aOEM%252F0RUI5W0lZDHWFlbACluHcYyLmrlCOakFbUdP5%252BfvbgeTh45SLACUBVe95dIYwR2gDtnYoWicmSX0cl%252F6BRUb3h1vTRDXIFfFjGyxNunhACyzcOgaKUT0%252BMXuXRUClta7kXEFQZEFY7AlGFFKke2fJCOTe7hTWsQqmYdII%252BBjzyiDDEYS2GQciIjnT21wOF9%252Ft4k2%252BCo1KhfHuKMyUKyYKbqel9ZvdBlGCco5m1jdfmsDV%252FZzZKagpoYoRYrosiGYepw5vumcEZB08MOXv7p%252Bqxct4HtTEDaZLOYcIwuz6lT6XtAXCzoXJbSoUbdVuiNFhGSHy3Q68IfVaAwBdjDHHOQmOcF%252F8zr128hLcwx14%252BxjPfUJDTfCu0Cad66AXqU%252Fhl%252FYk%252BZCCxMERNIsoicEhCo2Oekc0P6NtFtYSf5IOu2osiJUjr2myHQ0uvYWaRVmxZsWyArsZWjoUJ8R7NtVH6i1wdq7QR70C70Bho0Rxs2HUQapDsE6dUGFn71DbIJCuBKYupLkazR3JabcmCencx03SHiFVaq9%252Fo82V1uOy%252BeAgc%252FsQgyevp8JjkOBU%252FGIqVztYzGP9UwBsx%252BP2Olic3GB2BU2w5c%252FjA4cO%7Cclp%3A2334524%7Ctkp%3ABFBMzO-O7LZf
If I shake my phone (samsung f62) I can feel and hear something lose shaking(I doubt it's the battery ) I got my phone repaired and after 1½ month noticed it. I doubt the repairing person has changed the original battery Please help
I thought they used Li-Polymer battery, but it was Li-Ion. It does matter to me when it comes to those type of batteries. Thanks for the teardown video!
Where can I find motherboard flex cable ? Which model has the same flex cable ? I have been trying to find it since 5 months, anyone can help me please
Hi, no the storage chip or ROM is soldered onto the motherboard and is not removable. If you cant get your device to power on, you would not be able to get your data from it. There are ways where places can possible de solder and move the ROM chip to a new board etc, but would be very costly.
@@PBKreviews Sir, the technician told me, the IC(power IC) is affected due to which phone is not getting charged. Suggest me sir, what to do because even the technician is an amateur. So where can I get best and Can I get a new IC (if yes: then how to get it sir). Which phone's IC can be replaced with my F62 or Where can I get a new one. Sir, please suggest.
OR, what if, I buy a new motherboard and replace the damaged parts from old one (motherboard), atleast I can get my datas safely. What's your opinion, Sir. What else I should do, please suggest me, if there is any other way to get my datas, it's really important.
Its soldered onto the sub board, so you would either need to replace the sub board or if you have knowledge in soldering, you would need to de solder the headphone jack and solder a new one on.
Guys can someone help me I have a samsung f62 and the problem is when I watch a video on TH-cam or watch tiktom the start been hot, can someone help me 😫
![ละลาย (LALALYE) - DAOU PITTAYA ต้าห์อู๋ พิทยา [OFFICIAL MV]](http://i.ytimg.com/vi/wo6r9TgausI/mqdefault.jpg)
Samsung made a super glue that can be used to fix a roof ceiling too
@@Luke_4044 still it's difficult to remove a battery w/o alcohol or prying tool
Thank you so much man. You halped me to save my GPS that wasn't working because an oxidation on the flat antenna.
you're welcome
Great Bro ..... Keep it up.
Which liquid i use to again assemble the back of phone ?? Suggest a alcohol name which you used in battery pull off
You can purchase a replacement battery door/back cover which comes with the adhesive tape pre installed like this one: www.ebay.com/itm/276051222709 or you can use B-7000 glue but better to use the battery door that comes with pre installed adhesive. I can't seem to find the adhesive strip sold alone for this phone. As for the adhesive remover here is the link: www.ifixit.com/products/ifixit-adhesive-remover?variant=39915173740647
There is some issue in my F62 phone. May be malfunction in my motherboard but I want my datas & files anyway. Can I remove my SDcard (or the hardisk where all the datas are collected)from the motherboard , so that I can fix it in my new F62 phone.
Thank you very much for uploading this video because i owned this mobile F62... But faced problem by taking this... small small dirts are inserted into 2 cameras : 12 megapixel and 64 megapixel cameras.. I bought this F62 from india officially ... But i am Bangladeshi
You're welcome
how did dirt get into the camera module ? did u drop it in the dust or something ?
@@RandomHandles same doubt
Same here with the 12mp and 64mp
My f62 phone dropped and display is perfectly fine but touch is gone! Not working at all .. i want to know if we can repair digitizer of this model or get it replaced without replacing the whole screen .
Pl reply
No you would need to replace the screen as well. Only factories with special tools and machines can replace just the touch digitizer properly. Also you can take the phone apart and make sure the cable didn't come loose or disconnect and reconnect it to see if it will fix your problem.
After this video what do you think about this device?! Is it worth to get it?
Its not a bad phone, fairly easy to repair.
It is much more speedy than vivo,realme,poco,moto phones
When I tap on the centre back side of my F62 it feels like there is hollow inside, it only feels when I tap on the centre of the back side, is it any problem with the device and should I go to the service centre to check this?
When I tap on the top and bottom of the back side i.e., near the camera module and on the Samsung logo on the back side, it feels like something is inside but on the centre part it feels like hollow inside
It's normal. The center of the back has a slight gap between the battery and backplate and the top and bottom of the back have the plastic covers covering the board and sub board so that is why it sounds like that.
@@PBKreviews but some days ago it fell from my desk and got hit on the top of my bottle, the centre of the back of my phone got directly hit on the bottle cap, is it ok?
Or should I once check as that hit can cause any damage inside the phone?
@@PBKreviews the impact was near the flashlight area
Where can I find a replacement screen for f62 on amazon...haven't seen any
You can check ebay or other sites, here is a link (m62 should be same as f62): www.ebay.com/itm/403748543978?hash=item5e0149ddea:g:yKIAAOSwRvFivt93&amdata=enc%3AAQAHAAAAoEToC9twciZxtxwmdoZGkCEO%2BNbyh%2B0oB2QISV6qhLaQhX1eyKsirhRGELcJOvcILgTjAakRCZDB%2F%2FZ5x0Wnk0Mkq0d0lL7037jDVFR6ZKrKrDTX8HVeKgz0tvkXlvuUtgDdZYzaCA4Wc25B0EaRWtlsmVmewcafqkLRHB6NBDoTgYvIM4f%2BNr5eFt7k%2FMKO%2BqkteIhDplP1vYpwP%2BANLdQ%3D%7Ctkp%3ABk9SR4L-ke7lYA
Thanks
You're welcome
Can you tell me if those flex antemna cables on the frame are the same or similar to another model? I damaged all three of them and cant find a replacement for M62
This is the part you would need: amzn.to/3jZOhRX
Hi.
I want to replace charger board, it is possible to change with charger board m51? I was looking for m62 series, couldn't find it.
Hi, they look to be the exact same so ya it should work fine. I can't guarantee it but looks to be the same sub board :)
My Samsung M62 got in water, after I let it dry on its own for a few days, then I turned it on again, the fhone is on but only the light is on..the LCD doesn't come out anything just the light is on..is it only the LCD that needs to be changed ?
Not sure, no way to know until you try a new screen. But your best bet is to take it apart and not try to use it like that because it will short the main board or other parts. You need to disconnect the battery, dry out any water inside, brush off corrosion on chips and connectors and then see if the phone will work.
what type of the internal storage ? UFS 2.1 or UFS 3.0 ?
Ufs 3.0
@@vinayv.r7478 thank you
I’m having a green tint screen issue , suggest a fix please 😭😭
Can I get connector on the mother board .connector on mother board is damaged
This phone doesn't have good cooling mechanism as frame is plastic. I think someone with enough tools can make a metal frame and see if cooling goes well and phone may perform like Galaxy note 10. That 2nd back thin cover with nfc antenna, if it has good heat conductivity it will give good performance. Blend of plastic and copper also good
It's not the best cooling but isn't too bad either. Has a good amount of graphite/graphene in the phone to transfer heat. There is a layer of graphite under the motherboard as well as graphite padding on the board, and graphene film on the back housing. But yea cooling can be better with additional measures but this phones price and purpose was not meant for it to be on a high end level.
Yesterday little bit phone down part got wet in water and speaker is not working properly...please suggest me anyone
many thanks for this video
You're welcome
please make teardown for samsung a72...Thank you
will look into it
Sir, can we unlock Carrier aggregation in F62 by opening the motherboard. Please reply
No
Does anyone know where to get a hard case for this thing? Amazon stuff all feels way too cheap and sketchy and I can't afford to break this thing too quickly
Try Nillkin or Ringky branded cases, search amazon for them
Hey any idea where i can buy 'New screen replacement?
Hi, there are some listed on ebay if you search galaxy m62 lcd.
I will provide you original folder@4000,will open in front of you,you can contact me
Can the M62 battery be replaced with the M51 battery? They have the same model number and same capacity.
Yes
@@gamingadda7672
Many thanks
It's very heavy, if we change the 7000 mh battery to 4500 mh one, will it be lighter ??
will reduce the weight a little bit but will cut your battery life down by half also. Plus you would need to find a battery with the same connector and cable length to work.
Sir my phone (F62) is charging for 10 seconds and then automatically gets disconnected ,is there any problem with flex cable as sub board is not damaged?
today i was going through the same problem in f62 I've changed sub pba in service center cost 1174 rs.
@@faizanchanda6961 My F62 suddenly stopped and turned off..when taken to service centre today they told that mother board is dead....dont know wat to do...can we retrieve data from Dead motherboard....dont know how to fix this its very hard of mobile data is lost....Dont know how to handle this
@@trailblazerohm2654 ask them for recover backup in other device if possible
Nice Information
Thanks
Hey my samsung f62 sim tray is stucked and can't able to eject by pin. Please it in warranty and i can return the product. But I need to take out my sim and SD cards out Please help me to solve the problem
The only way to be able to remove it would be to take apart the phone and try to internally but there is the chance of damaging the sim reader and also taking it apart would void your warranty. You can try contacting samsung and let them know your sim is stuck and wont come out and see if they can do it for you and return your sim and memory card.
If any part gets damaged,you can contact me.I will provide you from my mobile phone in front of you,at a very cheaper price
Where can i get new original battery of same phone? my battery after 3 month crashed! 😢
Here is a link for the same battery (which is used in multiple model phones): www.ebay.com/itm/373441493555?_trkparms=ispr%3D1&hash=item56f2d8fa33:g:TaEAAOSwBv9gEWyv&amdata=enc%3AAQAGAAACkPYe5NmHp%252B2JMhMi7yxGiTJkPrKr5t53CooMSQt2orsSafTQYbq3L7RBVAMi0K9cw%252BUrsX6QGln7jOtgWMHy5PUPefCf%252BhiXVI%252BVr31WYRlbHSEjdNGstmHqI%252Ftkbx1BiJ6vo3qhaZkM7%252FsxUzjw4FQPk8nxaZsorLgvy3gSaKJmobFWBCzDQhJ1Cb%252FSprRKhElxmELIUBtZPPELvfe0ND9EpfRnexe2vqdhKdXUUbziT6w1hN9ksKLlMbsdS8g1e6aOEM%252F0RUI5W0lZDHWFlbACluHcYyLmrlCOakFbUdP5%252BfvbgeTh45SLACUBVe95dIYwR2gDtnYoWicmSX0cl%252F6BRUb3h1vTRDXIFfFjGyxNunhACyzcOgaKUT0%252BMXuXRUClta7kXEFQZEFY7AlGFFKke2fJCOTe7hTWsQqmYdII%252BBjzyiDDEYS2GQciIjnT21wOF9%252Ft4k2%252BCo1KhfHuKMyUKyYKbqel9ZvdBlGCco5m1jdfmsDV%252FZzZKagpoYoRYrosiGYepw5vumcEZB08MOXv7p%252Bqxct4HtTEDaZLOYcIwuz6lT6XtAXCzoXJbSoUbdVuiNFhGSHy3Q68IfVaAwBdjDHHOQmOcF%252F8zr128hLcwx14%252BxjPfUJDTfCu0Cad66AXqU%252Fhl%252FYk%252BZCCxMERNIsoicEhCo2Oekc0P6NtFtYSf5IOu2osiJUjr2myHQ0uvYWaRVmxZsWyArsZWjoUJ8R7NtVH6i1wdq7QR70C70Bho0Rxs2HUQapDsE6dUGFn71DbIJCuBKYupLkazR3JabcmCencx03SHiFVaq9%252Fo82V1uOy%252BeAgc%252FsQgyevp8JjkOBU%252FGIqVztYzGP9UwBsx%252BP2Olic3GB2BU2w5c%252FjA4cO%7Cclp%3A2334524%7Ctkp%3ABFBMzO-O7LZf
If I shake my phone (samsung f62) I can feel and hear something lose shaking(I doubt it's the battery )
I got my phone repaired and after 1½ month noticed it.
I doubt the repairing person has changed the original battery
Please help
Probably just the camera assembly.
I thought they used Li-Polymer battery, but it was Li-Ion. It does matter to me when it comes to those type of batteries. Thanks for the teardown video!
They use li-ion in most of their devices including flagships
Nice
Thanks!
bro m62 and f62 are same or not
yes same, just different regions named it differently :)
3:38 is this battery 7000 mah
yes, its 6800 mAh rated and 7000 mAh typical capacity written bellow it.
Where can I find motherboard flex cable ? Which model has the same flex cable ? I have been trying to find it since 5 months, anyone can help me please
Not sure, I just checked, couldn't find it either.
Is there really 7000 mah battery in the phone or less than that???
Yes its 7000 mAh. Each battery has a rated and a typical capacity written on them.
hey bro , water went into my F62.... but even aftr technicn cleaned the water phone is not turning on....
Then probably the main board or other components in the phone are damaged beyond repair.
I just need my datas and files anyway. And, my phone 📱 is not even switching on. Please help me out, Sir.
Hi, no the storage chip or ROM is soldered onto the motherboard and is not removable. If you cant get your device to power on, you would not be able to get your data from it. There are ways where places can possible de solder and move the ROM chip to a new board etc, but would be very costly.
@@PBKreviews Sir, the technician told me, the IC(power IC) is affected due to which phone is not getting charged. Suggest me sir, what to do because even the technician is an amateur. So where can I get best and Can I get a new IC (if yes: then how to get it sir).
Which phone's IC can be replaced with my F62 or Where can I get a new one. Sir, please suggest.
OR, what if, I buy a new motherboard and replace the damaged parts from old one (motherboard), atleast I can get my datas safely.
What's your opinion, Sir.
What else I should do, please suggest me, if there is any other way to get my datas, it's really important.
Please also do redmi note 10 pro
will look into it
How to repair headphone jack
Its soldered onto the sub board, so you would either need to replace the sub board or if you have knowledge in soldering, you would need to de solder the headphone jack and solder a new one on.
I will provide you subboard at very lesser price.Will provide you from my new mobile phone,will be opened in front of you,at a very lesser price
@@RajeevKumar-rn9qh it started working again, on its own. After a day or two
Guys can someone help me I have a samsung f62 and the problem is when I watch a video on TH-cam or watch tiktom the start been hot, can someone help me 😫