This welder is amazing, it’s a Multi process, multi voltage welder. I’ve had welders that cost four times as much and didn’t do as good a job. I would highly recommend this welder.
It looks like a great bargain! What can you tell me about your welding table? I can see it partially in the video, and I'm curious to hear your thoughts about your portable welding table.
Can you please leave a link for the consumables or tell me the part numbers because I don't want to use mine until I get spare parts I don't want to do a job and burn the consumables and not have spares
Great video, i have same welder . I want to create a quick disconnect to gas inlet valve. To get rid off barb claps. I not having any luck with MM barb fitting . Any suggestions to do a set up ? Greatly appreciate it 👍🏽 Thanks 🙏
Yeah if you look at the chart on the back I was off a little, it’s 100% at 140 amps, either way this thing can weld all day. I’ve never tripped the OL.
Sir, kindly if you can make another video, setting it at your recommended settings, using Mig, Mig gasless lift TIG, MMA... Actual welding it, with close up cam, Please Sir...
I concur with your review. I bought one a year ago and have used it heavily since then. Great value.
I'm sold. Idk why I didn't think to look on Amazon for a welder before. I'll be buying this bad boy to install my roll cage.
It really is a great welder and the price is hard to beat 👍
I love the look of that welder man. Same gray color as the honart with that blue and black looks good.
I am going to save and grab one of them. Practice at home and try to pass that test again to get that dam stratification. Thanks man.
You can do it!
@@floydwilcox2640 thank you. Keep trying. Lmao
Thanks! Good job and information.
I want to try lift tig but I don't know where to get the parts.
It looks like a great bargain! What can you tell me about your welding table? I can see it partially in the video, and I'm curious to hear your thoughts about your portable welding table.
@@rodneyevans6671
Just go to my TH-cam page and there’s a video there on it.
Can you please leave a link for the consumables or tell me the part numbers because I don't want to use mine until I get spare parts I don't want to do a job and burn the consumables and not have spares
Great video, i have same welder .
I want to create a quick disconnect to gas inlet valve. To get rid off barb claps.
I not having any luck with MM barb fitting . Any suggestions to do a set up ? Greatly appreciate it 👍🏽
Thanks 🙏
As much as I like options…I really love simplicity! Does it come in just a plain amperage and wire speed mig version?
They do have other models, but this is the only one I’ve used.
What gas are you using? I have the same I'm just using flux core.
@@aliensocks8789
I’m using C25 gas. 75% argon 25% CO2
90% at 150A just WOW!
Yeah if you look at the chart on the back I was off a little, it’s 100% at 140 amps, either way this thing can weld all day. I’ve never tripped the OL.
Thank you for your video very informative I just bought one Now I might be able to figure it out lol
There great units, let me know how you like it.
Will do @@floydwilcox2640
For the mig setting you have to run gas with it right? Or will it run without gas?
It runs both gas or gasless, gas would be MIG, and gasless would be flux cored.
Is this welder spool gun compatible?
That’s a great question, I’ll have to look into that. I’m not sure.
Not spool gun ready, but here’s how you can convert it to weld aluminum.
th-cam.com/video/FGhSo82MP9U/w-d-xo.htmlsi=h-T-vqPbubbAs4QR
What size wire did you use for the settings you put on your welder?
I’m running .030 wire with C25 gas.
@@floydwilcox2640 thank you. I'm going to try that
How much azzuno 200amp?
What fitting you used to connect your hose to the flow meter
Hi, the fitting came with the flow meter.
Here’s the link…
BETOOLL HW9003 Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld a.co/d/5bhPnab
Vrd voltage reduction device
Sir, kindly if you can make another video, setting it at your recommended settings, using Mig, Mig gasless lift TIG, MMA... Actual welding it, with close up cam, Please Sir...
Hi, What exactly are you wanting to see?
There is a point in the video where I show my settings based of metal thickness.
It’s inside on the door.
The actual welding process Sir... But if you can't, it's ok.@@floydwilcox2640
I can’t post videos in the comments, but it welds great. I’ve only done mig, stick, and flux cored and it ran great on all 3.
@@floydwilcox2640 Thank you Sir... (fr: Philippines)
How much azzuno200 mig weld machine?
$269
a.co/d/almIe3L