ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Save money by repairing Delta shower tub valve, very easy DIY project
ฝัง
- เผยแพร่เมื่อ 12 ส.ค. 2024
- Some of the items used in this video are:
DANCO Waterproof Silicone Faucet Grease | Silicone Sealant | Plumbers valve Grease for O-rings | 0.5 oz. | 1-Pack (88693): amzn.to/2PvRKv4
Delta RP28603 Replacement Part: amzn.to/3lTkdXS
If you liked this video, or if it solved your problem, please consider donating a dollar ($1) using the “thanks”. Thank you.
Please view and use the content at your own risk.
Inventor of Red Disc Seal. Bathtub spout rear seal that has proven to keep water from getting pass the tub spout pipe. Therefore, preventing water damage behind the finished wall. For more detail and to purchase visit www.RedDiscSeal.com
The video shows how to repair Delta's shower/tub valve cartridge assembly and how to adjust water temperature. If the shower head or tub spout leaks, most likely, replacing the seats and springs will stop the leak. When replacing these components, it is always a good idea to use silicone or waterproof grease to extend the life of the seals and create a better bond between the seals and the rest of the valve.
Disclaimer: This video and its description contain affiliate links and I receive a small commission
![ได้ซะที! ชื่อBabyของเรา [cc] แดนแพทตี้ SS2 | EP.47 |](http://i.ytimg.com/vi/4jrGByLm-Fw/mqdefault.jpg)
Thank you for sharing. Your video is well done and the repair worked for me. Repair kit was $5. New Delta cartridge $52. Saved me $47.
Frank Castillo Thanks for the feedback and glad to help.
Greetings from Pennsylvania! Thank you for this video. As others have commented, watching this saved me from buying new cartridge. Buying new seats and springs fixed perfect.
Thank you so much for taking the time to provide feedback.
thank you very much. The cartridge now cost $62 and replacement springs and washer+springs $5 . really appreciate explaining in detail including use of silicon grease and calibration
My pleasure. I’m glad that you found the video helpful and I appreciate the update on the pricing.
Greetings from Edmonton AB... Thank you very much for this piece of advice. Applied the silicone to the seals while plying them. No leak at all now. This explicit video saved my day...Cheers.
Thank you for the feedback. I’m glad to hear the video was helpful.
Thank you so much, this saved me a lot of money on a new cartridge! My “professional” plumber said my new delta faucet had a bad cartridge! Brand new faucet! I took the tub faucet down myself, used silicone plumbers grease and used it on all the O rings and bonnet and Wahla! No more leak! Not one drop!! They wanted to charge me more money to come out and fix. Thanks again!
My pleasure. Well done.
Really ? A plumber tried to charge you for a new one? That's unbelievable. They usually charge an amount that's exactly proportionate to the services rendered. They work so hard for the minimal amount they charge. I usually tip extra because they are making minimum wage on a good day. We all need to support our hard working, honest plumbers.
@@sagecreekwitt3301 I have never met an actual plumber who made minimum wage.... ever.... once..... NEVER
@@KissingEmbers yeah I was thinking a decent plumber in a busy city is probably making 70k a year
Not sure if it applies same for plumbers but we are taught that if something is defective or broken, we have to replace the item and not “redneck it”, yes it costs more but thats how we do our job
You really saved the day. Thank you. All that we're missing is the hot water adjustment turn. We thought we still have a problem.
My pleasure.
thanks. I changed the new cartridge but didn't know the option to change to more hot water.
Thanks - I was blowing through these at 1 per year so this is an easy cheap repair!
My pleasure. I’m glad that this video was helpful. If you are not a subscriber to my channel, please consider subscribing. Thank you. Farshid
Thanks for posting. Exactly the problem. All the other o-rings looked ok while these two smeared black goo when touched. Greased all rubber parts and threads.
Thank you for the feedback. Glad to hear the problem was resolved.
Thank you, thank you, thank you!!! This is exactly the video I’ve been searching for! I have that exact cartridge, bought the repair kit and the same Danco silicon grease but just wanted to make sure how to apply it all! Thank you sooooo much!!!!
Cost of repair kit & grease only $10 and about 10 minutes time
Cost of a new cartridge - $20 aftermarket
Delta brand cartridge -$62!
My pleasure.
Cost from Delta, free. They will send you one for free. They send the seats and springs first, then they will send you one at no cost. Just did it.
Excellent explanation and instructions! The presentation is clear, concise and precise ❤
Thank you.
Thank you for such a clear explanation! I install a new cartridge but didn't know about the hot water adjustment! Brrrr!
Glad it helped!
Thank you so much for taking the time to share your knowledge with the rest of the world God bless you
Lakota Pride My pleasure. Please subscribe to my channel. Thank you.
Thank you so much for the video. You saved my day!
Thank you.
Helpful information, thank you for sharing !
Thank you for watching and your positive feedback.
Thank you for this video!
Thank you for the kind words. It is my pleasure to provide these videos. If you are not a subscriber, please consider becoming one and set the notification bell. If you are, thank you for your support
Excellent! Thanks!
Thank you Chris for the kind words. It is my pleasure to provide these videos. If you are not a subscriber, please consider becoming one. If you are, thank you for your support
Awesome! My
Project tomorrow
Thank you for your feedback.
Thanks! That did the trick.
My pleasure. Glad to hear it worked out for you.
Very good and the detailed instruction. Thank you very much.
My pleasure. Thank you for watching and please suggest my channel to others as I frequently post such videos.
Glad to help. If you have a bathtub please consider watching another video from me: th-cam.com/video/e19LT9vW1t0/w-d-xo.html
This video helped a lot.thankyou.
Happy to hear that. My pleasure. Please share the video with friends and family.
Thanks for sharing bro
My pleasure. Thank you for watching.
very well done video!
Thank you.
Thank you for this great video. I changed out my entire cartridge assembly with a new one, and it kept leaking. Bought it another box of sitting seals, thinking those were bad, and it was not that either.... the entire time I didn't realize that I needed to put on plumbers grease.... so for anyone reading... if you replace everything and it keeps leaking, make sure you use plumbers grease...
My pleasure. I am glad to see your issue was resolved. Thank you for sharing your experience.
@@JustForYouDiy Thanks, yes. I am very happy because I tried everything, it is incredible how just that little bit of plumbers grease makes a huge difference. Two days later and still, not a single drip.
Thank you for the info. I just bought a new cartridge last week, and installed it. I still have a leak. I will purchase plumbers grease. Thanks again!!!
@@hasun6278 I assume by now you found out the issue was not plumbers grease.
@@fishworks1 lmao.....yup. I was hoping it was that simple. I changed the shutoff valves.
Thank very much I saved money good luck man
Glad to help. If you have a bathtub please consider watching another video from me: th-cam.com/video/e19LT9vW1t0/w-d-xo.html
Thanks good job!
Thank you very much.
excellent, I was wondering if there was a fix instead a 50 dollar replacement valve, i have some of those in my garage already, thanks a bunch
Thank you.
Thanks!
Thank you for your feedback. Also, if you are not a subscriber of my channel, please consider subscribing to stay informed of upcoming videos and products, link below:
th-cam.com/channels/IUXDoJFbA-tA3UnzIAa_og.html
u nailed it !!! thx
Thank you.
If the video helped you, please support us by using super thanks.
Thanks for the tiip
My pleasure.
Very well explained! Thank you so much!
Thank you. If you haven’t subscribed to my channel please do so as I am actively posting new videos once a month. Thank you again for your gratitude.
Mine just started leaking. Thank you.
My pleasure.
thank you! my shower faucet just started endlessly dripping all day, a couple weeks ago, and using your video i fixed it myself and gave everything i could reach a little scrub with limescale dissolver. turns out one of my little rubber seats had a nick/tear in its surface for some reason. i wonder how that managed to form when it wasnt leaking before?
Thank you for your feedback. I am glad you found the video helpful and resolved your issue. The seals do wear over time and develop nicks and tears. Again, glad to hear you got it fixed.
Is there sny repsirs for delta cartridges that the hot water adjustment very hard to turn
(-Another "Thanks_" here too man❗️)
Thank you.
Hi. I just wanted to add a comment that Delta and Kohler both have Lifetime Warranty on all parts. I know time may be a problem (having to wait for the part to be shipped) but it may save you $85-90.00 on complete valve. Just a thought. Thanks for video.
Excellent feedback. Thank you for posting it.
How do you initiate a warranty replacement? There is no way I have the original receipt, 2002 build.
Your video is awesome! Thank you ! I do have a question. I change the entire shower valve and my shower head still has annoying drip any ideas what else I should do?
The only place the water could come from is the valve. If the cartridge has been replaced and there is still a leak, at times, this is due to the age of the valve body, hard water deposit inside the valve. Hope this helps.
Hello: Great video. Thank you so much for sharing your knowledge. What is the best way to clean the dirt off the valve? May I use apple vinegar? Thank you again.
Thank you. You can use White Vinegar or CLR to remove hard water deposits. If you are using CLR, please read the instructions first.
You could have further disassembled the cartridge and cleaned/lubed the temp balance rod inside. The white part separates. I'm sure stuff gets stuck in there.
.
Greeting from Michigan, and thank you for the video. I adjusted the setting to the hottest and the water is just warm. Any idea of what to do. Thanks
If the hot water throughout the rest of the house is hotter and you have waited long enough for the water to get hot at the shower and the adjustment at the cartridge is set to the hottest, it could be a defective cartridge.
Good video just a bit of my experience the danco seats aren’t so good Id definitely spend the extra $1 and get Delta
Thank you John for the feedback and the input.
I used Vaseline as lube works well .
Thanks for sharing. Much appreciated.
Great vid, unfortunately, due to inflation, the full Delta replacement cartridge now costs $62.48 and just the seats and springs are $5.78 quite a big increase in the 2 1/2 years since you made the video. I am curious if it would make sense to purchase the full cartridge repair kit that replaces all the gaskets, seats, springs, and the tail piece?
Thank you JC. Yes, sometimes it makes sense to buy the whole repair kit. Those are the times when, it’s to difficult to remove the cartridge for the second time due to, mechanical issues, having the water off creates too big of an inconvenience, your limited amount of time to work on the project, your budget, etc. I am glad you found the video helpful. Sincerely, Farshid
Does this work for Delta series 1700?
Thank you so much for the tutorial!
Sorry I am not familiar with Delta 1700 series.
I’m hoping you could help me I followed your instructions to a T. I actually got the pieces from Delta did it and it’s still leaking. pulled it apart make sure to clean everything again reseal silicone sealed and put it together and it is still leaking are there internal parts in the cartridge that could go bad that need to be replaced or should I just replace the cartridge?thank you for your time.
Sorry to hear that replacing seats and springs did not fix the leak. You may want to try one more thing before replacing the cartridge. There may be some hard water deposit inside the valve body keeping the seats from sealing, where the springs and seats go. If so, you can soak a piece of cloth with CLR (wear gloves and follow the CLR’s handling instructions) and shove it into the valve body and let it sit in there to dissolve the hard water deposits. I’ve seen that work before. Hopefully it will work for you too.
Do you need to shut off the water before adjusting the hot water? I didn’t realize I could adjust either.
Yes. It is best to shut off the main water supply.
the narrow part of spring goes into cartrige while tthe large part of springoutside of cartridge
Thank you for posting your comment.
Can you change the seats and spring without taking it out if it’s stuck. Can you twist it off in place thanks
Most likely you need to take out the cartridge.
Hi, good video. I just changed a new cartirage after dripping problem got worse. It seems no more many drops dripping down.But I still find out very few water drops in cantainer I put under Delta sprout after using sprout 24 hours later. I want to ask your experience if it is normal to wait more than a day to dry out water in cartridge and inside sprout. Thanks.
Ping, it should not leak after replacing the cartridge.
@@JustForYouDiy Still have at least 2 drops out after many hours. Is it possible the velve washed out and still have slow leaking after no use facet for 4 days? Should I consider change valve? Or try to clear mineral buildup inside of valve?
Delta will send the springs and the cartridge for free.
Thank you for the post.
What does the silicone grease do? Or how does that prevent it from leaking?
Michael, Silicone or waterproof grease extends the life of seals and at times help better seal by keeping the o-rings more pliable.
I was able to locate number 19063 on the Delta cartridge, however, I cannot locate another with this number. What is the best way to find a compatible cartridge or replacement on the market?
Unfortunately, there is not an easy way. When I’m faced with that issue, I take the cartridge to HD or a plumbing supply house.
My cartridge was seized in the valve so I had to chip out the old one and buy a whole new one. What can I do to stop the cartridge from seizing in the valve?
I use silicone grease to lube the cartridge.
Hi there! What is the best way to reach you? I could not find your email, I would like to consult something that you may be interested. Thank you!
It's funny that all these corporations are pushing "environmentally friendly", but they are still telling you to throw away an entire part assembly when all it needs is a single cheap part. This is everything from shower parts to auto parts.
Thank you for your comment.
any alternative lubricant for the seats?
I’ve used waterproof silicone lube with great success. Hope this helps.
Thanks
Can we lube with Vaseline if we don't have the silicone grease?
I believe Vaseline is petroleum based and if so, it’s not good to use it on most seals. Hope this helps
@@JustForYouDiy Interesting, better buy some plumber grease then, & keep it handy
I have changed the seat and the spring and the leak did not stop. Any advise?
Lucho, if the seats and springs are good, couple of other things could cause the drip. If the valve has a tension adjustment, a ring that’s part of the retaining nut, then, the tension could be too loose. The other possible cause could be hard water buildup inside the valve where seats and springs go. To get rid of that, I’ve used CLR. I’ve put CLR in a spray bottle and spray the inside of the valve. Then after 2-3 minutes, I spray water to remove all CLR. If you decide to use CLR, please follow the mfg’s use instructions. Hope this helps.
@@JustForYouDiy changing the cartridge work out thank you.
the handel has no set screw how do you take handel off
There are many different trim kits out there, therefore, unfortunately, difficult to say how the handle is attached.
Very Good!... 53
Thank you Carl.
Glad to help. If you have a bathtub please consider watching another video from me: th-cam.com/video/e19LT9vW1t0/w-d-xo.html
one more trick buy bunch of these seats for like 6-7$ u will use them evantualy
It's is not as easy as you said it wouldn't come out unless you damage the valve when removing
Of course, ease of removal is dependent on how long the cartridge has been in there, the condition of water, etc.
👍🏽🙏🏾🇯🇲
👍
They cost $75 now.
Thank you very much for the update.
Nice video. I was trying to get the cartridge out and it wont come out. I just twisted the upper part and replaced the springs and put that part back again. Saved me some years. Sooner or later i will have to call plumber to get that whole thing out when it start giving trouble again.
Thank you.
$89 for a cartridge in 2022. Total Delta Rip Off. Horrible design. Unreliable. Total Rip Off.
Thank you for sharing. It makes repairing it even more appealing.
Thank you, I got the seat and spring kit at Home Depot for $6 …I bought 2 and changed out both of my showers in less than an hour …they wanted $69 for the cartridge some cartridges were $80+ I had a feeling that there would be likely no need to replace the cartridge… I was sure someone would be able to specify the actual part that are Predominantly getting worn out… last time I replaced the cartridge because I had no awareness of the seat and spring kit… you saved me about $120 …I did have to search through a lot of videos to find this excellent video… but it was worth it… I would like to add that there is another part that I ran into that was very troublesome and I was never able to find an answer on TH-cam… and that is getting off a stubborn cartridge nut or ring… all the answers TH-cam provided were horrible… channel locks wouldn’t do it …no chemicals would loosen it …what I came up with that got it off instantly and with pretty much no effort was a belt wrench… the more you turn the tighter it gets so you don’t get the slipping and shredding that happens with channel lock… barely turned it and it came off without any damage to the ring… it was magic 🪄
Thank you.
8:00
Thanks!
Thank you very much.