How to Repair Delta Monitor Tub & Shower Valve with a New Delta RP32104 Cartridge Kit
ฝัง
- เผยแพร่เมื่อ 9 พ.ย. 2020
- In this video we have a Delta Monitor showerbody that has the tub spout dripping. It’s NOT a defective tub spout. It’s a worn washer.
Thanks to @JimPelligrino: here is the part:
amzn.to/2KJXZsT
Difficulty on Scale 1-10 (10 being hardest)
6
DIY Tip:
You need the right tools 🛠
Make sure you have the correct part on-hand
Thanks for watching. I appreciate all the subscribers. 15% of viewers are subscribers who help support this channel.
If your not a subscriber, take 1 second and hit that subscribe button. It won’t hurt and you won’t get any spam! - แนวปฏิบัติและการใช้ชีวิต
You should clean all that build up before installing new set up
Thanks for the video, just got the same issue with the notch, easy fix: just pop out the gray cover and replace it with the old white one, it fits! If you just want to replace the washer kit, apparently Delta sends them for free.
BTW the newer style 1700 series cartridge with the dark grey top is part# RP46463, the older existing cartridge with the white top is RP32104
Thanks for the great video!
The grey cap cartridge is the wrong part for replacing RP32104. That is actually RP46463. Just trying to help anyone else out there trying to get the correct part.
thank you!
First step was to cover drain
What do you think ?
Great video. Having replaced the seals and springs, do you know if you could have installed a new trim kit onto the older-style 1700 series cartridge and rough-in valve? I’ve got a 16 year old Delta 1700 Monitor faucet, and I’d like to update the look of it with a new trim kit.
Always put a little plumbers grease on the treads of the cartridge cap nut. Makes it hand removable in the future.
That R10000 is a bit out of plumb in the wall. (left to right.)
Nice job. Wow that is one twisted up shower valve I’m surprised it didn’t leak.
I just changed one and the way i broke it free was by pouring CLR and letting it soak for 5 minutes. Screwed right off after that.
What if the brass ring is coroted and hard to get off? Help
I did mine yesterday if your going to do it do it right replace everything
Bro I was like so sh1t he’s going to bust off the shower valve with that pipe wrench lol on the next one try tapping on retaining nut with your channel locks, it’ll come right off😏
Sometimes they are stuck pretty good. I cut them off and pit in a new one.
Working on a shower valve too 🧐
can i install a T118 T 119' in this valve body
Nice I have one in my house thanks mike George the plumber
No issues with old cartridge after you replaced rubbers and springs ?
The top white segment of the cartridge can be removed and swapped onto the new cartridge.
Good thing you gave them the old cartridge instead of going and getting the correct part 🙄
If all else fails you can take a Dremel tool with a cutting disc and slowly cut into the nut until it pops open. Do it easy and you won't hurt the threads. New nut and guts and it's fixed.
I’m about to try cutting mine off , but I twisted my valve. Should I try twisting it back after I get the bonnet nut off?
@@300zxdriver I would try twisting it back before you remove the nut. The nut is frozen on anyway and it gives you something to put a wrench on. Just be careful and go for it. If you get the valve moved back into place, cutting the nut off shouldn't be a problem. Slowly cut across the threads until you begin to see their top. Then put a flat blade screwdriver in the slot and try twisting. Cut a little and then twist the screwdriver a little. Usually, the nut will pop open just enough to unscrew it without any thread damage.
Kelvin is in shock 😳
You just needed the spring, seal, and o-ring kit. (10$) The cartridge is 1700 model and usually is OK to reuse.
Do u by chance know what size oring this valve actually takes
Not without looking it up. Sorry.
Did you go to school for plumbing and air conditioning or did you learn as a helper? How old is too old to learn a trade? Thank you for your time
Never too old to learn a trade. Im a retired Master Plumber by trade & it served me well for 30yrs. Pick up the tools & go be a helper/laborer & give it your all.
U should show us how or what ordee the springs and seats go? That is why we watched u know
Did you miss that part?
What order do the seat & springs go?
Spring the seat
Where do you find a new ring?
Online
About sewer smell bathroom New wax ring still smell what could be
@@PipeDoctor im gonna replace this saturday all under house plumbing
Could be a dirty sink drain. Stand in front of sink and turn on faucet. If you get a whiff of the sewer smell as soon as the water touches the drain then clean out the pop up assembly.
Wow, hope it wasn't u who twisted that valve body....😬
Can you untwist them?
@@300zxdriver yeah u can. What I do is shock the nut with 2 hammers, it's a good trick, then the nut comes off by hand, I never put a wrench on those.
@@300zxdriver oh dang I thought u asked can u twist them... I would not try to twist it back, very likely to break if u do.
pain in the butt if it splits in half
Yikes! Greenboard with no waterproof membrane. Not going to end well.
What’s with the masks? I never wore one. Refuse to.
^^^^^ Look at this tough guy!
And why wear them in the video?